Nina Schalk

51 - 100 out of 115Page size: 50

Research output

  1. 2020
  2. Published

    Thermo-physical properties of coatings in the Ti(B,N) system grown by chemical vapor deposition

    Kainz, C., Schalk, N., Tkadletz, M., Saringer, C., Winkler, M., Stark, A., Schell, N., Julin, J. & Czettl, C., 25 Feb 2020, In: Surface & coatings technology. 384.2020, 25 February, 9 p., 125318.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Stress relaxation through thermal crack formation in CVD TiCN coatings grown on WC-Co with different Co contents

    Stylianou, R. P., Velic, D., Daves, W., Ecker, W., Stark, A., Schell, N., Tkadletz, M., Schalk, N., Czettl, C. & Mitterer, C., Jan 2020, In: International journal of refractory metals & hard materials. 86.2020, January, 9 p., 105102.

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2019
  5. Published

    The effect of B and C addition on microstructure and mechanical properties of TiN hard coatings grown by chemical vapor deposition

    Kainz, C., Schalk, N., Tkadletz, M., Mitterer, C. & Czettl, C., 31 Oct 2019, In: Thin solid films. 688.2019, 137283, 8 p., 137283.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Thermal expansion of magnetron sputtered TiCxN1-x coatings studied by high-temperature X-ray diffraction

    Saringer, C., Kickinger, C., Munnik, F., Mitterer, C., Schalk, N. & Tkadletz, M., 31 Oct 2019, In: Thin solid films. 688.2019, 31 October, 8 p., 137307.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Microstructure and mechanical properties of CVD TiN/TiBN multilayer coatings

    Kainz, C., Schalk, N., Tkadletz, M., Mitterer, C. & Czettl, C., 25 Jul 2019, In: Surface & coatings technology. 370.2019, July, p. 311-319 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    In-situ investigation of the oxidation behavior of metastable CVD Ti1-xAlxN using a novel combination of synchrotron radiation XRD and DSC

    Saringer, C., Tkadletz, M., Stark, A., Schell, N., Czettl, C. & Schalk, N., 27 May 2019, In: Surface & coatings technology. 374.2019, 25 September, p. 617-624 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Effects of reference materials on texture coefficients determined for a CVD α-Al2O3 coating

    Stylianou, R. P., Tkadletz, M., Schalk, N., Penoy, M., Czettl, C. & Mitterer, C., 15 Feb 2019, In: Surface & coatings technology. 359.2019, February, p. 314-322 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Thermal crack network on CVD TiCN/α-Al2O3 coated cemented carbide cutting tools

    Gassner, M., Schalk, N., Tkadletz, M., Czettl, C. & Mitterer, C., 5 Feb 2019, In: International journal of refractory metals & hard materials. 81.2019, June, p. 1-6 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Thermal stability of nanolamellar fcc-Ti1-xAlxN grown by chemical vapor deposition

    Tkadletz, M., Hofer, C., Wüstefeld, C., Schalk, N., Motylenko, M., Rafaja, D., Holzschuh, H., Bürgin, W., Sartory, B., Mitterer, C. & Czettl, C., 2019, In: Acta Materialia. 174.2019, August, p. 195-205 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. 2018
  13. E-pub ahead of print

    Evolution of microstructure and mechanical properties of a grades TiAlON thin film investigated by cross-sectional characterization techniques

    Schalk, N., Tkadletz, M., Terziyska, V., Deluca, M., Letofsky-Papst, I., Keckes, J. & Mitterer, C., 14 Dec 2018, (E-pub ahead of print) In: Surface & coatings technology. 315.2019, February, p. 155-161 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Cross-sectional characterization techniques as the basis for knowledge-based design of graded CVD TiN-TiB2 coatings

    Tkadletz, M., Schalk, N., Mitterer, C., Keckes, J., Pohler, M. & Czettl, C., 2018, In: International journal of refractory metals & hard materials. 71, p. 280-284

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Enhanced Ti0.84Ta0.16N diffusion barriers, grown by a hybrid sputtering technique with no substrate heating, between Si (001) wafers and Cu overlayers

    Mühlbacher, M., Greczynski, G., Sartory, B., Schalk, N., Lu, J., Petrov, I., Greene, J. E., Hultman, L. & Mitterer, C., 2018, In: Scientific reports (London : Nature Publishing Group). p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    High-temperature tribology and oxidation of Ti1-x-γAlxTaγN hard coatings

    Großmann, B., Tkadletz, M., Schalk, N., Czettl, C., Pohler, M. & Mitterer, C., 2018, In: Surface & coatings technology. p. 190-197

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Influence of cutting speed and workpiece material on the wear mechanisms of CVD TiCN/α-Al2O3 coated cutting inserts during turning

    Gassner, M., Schalk, N., Tkadletz, M., Pohler, M., Czettl, C. & Mitterer, C., 2018, In: Wear. 398-399.2018, March, p. 90-98

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Microstructure and mechanical properties of CVD TiN/TiBN multilayer coatings

    Kainz, C., Schalk, N., Tkadletz, M., Saringer, C., Mitterer, C. & Czettl, C., 2018.

    Research output: Contribution to conference › Poster › Research

  19. Published

    Microstructure, mechanical properties and cutting performance of Cr1-yTayN single layer and Ti1-xAlxN/Cr1-yTayN multilayer coatings

    Schalk, N., Pohler, M., Hirn, S., Terziyska, V., Polcik, P., Kolozsvári, S., Mitterer, C. & Czettl, C., 2018, In: International journal of refractory metals & hard materials. p. 211-216

    Research output: Contribution to journal › Article › Research › peer-review

  20. 2017
  21. Published

    Complementary High Spatial Resolution Methods in Materials Science and Engineering

    Paris, O., Lang, D., LI, J., Schumacher, P., Deluca, M., Daniel, R., Tkadletz, M., Schalk, N., Mitterer, C., Todt, J., Keckes, J., Zhang, Z., Popovski, G., Ganser, C., Teichert, C. & Clemens, H., 31 Dec 2017, In: Advanced engineering materials. 19.2017, 4, 22 p., 1600671.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Tailoring age hardening of Ti1-xAlxN by Ta alloying

    Großmann, B., Jamnig, A., Schalk, N., Czettl, C., Pohler, M. & Mitterer, C., 13 Sept 2017, In: Journal of vacuum science & technology / A (JVST). 35.2017, 6, 6 p., 060604.

    Research output: Contribution to journal › Article › Research › peer-review

  23. E-pub ahead of print

    Influence of Ar ion etching on the surface topography of cemented carbide cutting inserts

    Gassner, M., Schalk, N., Sartory, B., Pohler, M., Czettl, C. & Mitterer, C., 24 Aug 2017, (E-pub ahead of print) In: International journal of refractory metals & hard materials. 69.2017, December, p. 234-239 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Cross-sectional characterization techniques as the basis for knowledge-based design of graded CVD TiN-TiB2 coatings

    Tkadletz, M., Schalk, N., Mitterer, C., Hofer, C., Keckes, J., Deluca, M., Pohler, M. & Czettl, C., 2017.

    Research output: Contribution to conference › Poster › Research

  25. Published

    Cross-sectional characterization techniques as the basis for knowledge-based design of graded CVD TiN-TiB2 coatings

    Tkadletz, M., Schalk, N., Mitterer, C., Keckes, J., Pohler, M. & Czettl, C., 2017, 19th Plansee Seminar. p. 88/1-88/9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Influence of cutting speed and workpiece material on the wear mechanisms of CVD TiCN/α-Al2O3 coated cutting inserts during turning

    Gassner, M., Schalk, N., Tkadletz, M., Pohler, M., Czettl, C. & Mitterer, C., 2017.

    Research output: Contribution to conference › Poster › Research

  27. Published

    Influence of cutting speed and workpiece material on the wear mechanisms of CVD TiCN/α-Al2O3 coated cutting inserts during turning

    Gassner, M., Schalk, N., Tkadletz, M., Pohler, M., Czettl, C. & Mitterer, C., 2017, 19th Plansee Seminar. p. 92/1-92/11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Influence of the Ta content on microstructure, properties and thermal stability of arc evaporated Ti Al Ta N hard coatings

    Großmann, B., Tkadletz, M., Schalk, N., Czettl, C., Pohler, M., Jamnig, A. & Mitterer, C., 2017.

    Research output: Contribution to conference › Poster › Research

  29. Published

    Influence of the Ta content on microstructure, properties and thermal stabiltiy of arc evaporated Ti1-x-yAlxTayN hard coatings

    Großmann, B., Tkadletz, M., Schalk, N., Czettl, C., Pohler, M., Jamnig, A. & Mitterer, C., 2017, 19th Plansee Seminar. p. 96/1-96/12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Microstructure, mechanical properties and application behavior of Cr1-xTaxN hard coatings

    Pohler, M., Schalk, N., Hirn, S., Terziyska, V., Polcik, P., Kolozsvári, S., Mitterer, C. & Czettl, C., 2017, 19th Plansee Seminar. p. 53/1-53/9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Phase composition and thermal stability of arc evaporated Ti1 − xAlxN hard coatings with 0.4 ≤ x ≤ 0.67

    Großmann, B., Schalk, N., Czettl, C., Pohler, M. & Mitterer, C., 2017, In: Surface & coatings technology. 309.2017, 15 January, p. 687-693 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Straightforward measurement of thermal conductivity of hard coatings with the TDTR method

    Winkler, M., Tkadletz, M., Schalk, N., Mitterer, C., Bartholomé, K., Pohler, M. & Czettl, C., 2017.

    Research output: Contribution to conference › Poster › Research

  33. 2016
  34. Published

    Influence of varying nitrogen partial pressures on microstructure, mechanical and optical properties of sputtered TiAlON coatings

    Schalk, N., Simonet Fotso, J., Holec, D., Fian, A., Jakopic, G., Terziyska, V., Daniel, R. & Mitterer, C., 27 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  35. Published

    TiN diffusion barrier failure by the formation of Cu3Si investigated by electron microscopy and atom probe tomography

    Mühlbacher, M., Greczynski, G., Sartory, B., Mendez Martin, F., Schalk, N., Lu, J., Hultman, L. & Mitterer, C., 19 Feb 2016, In: Journal of Vacuum Science and Technology B, JVSTB. 34.2016, 2, p. 1-8 8 p., 022202.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Advanced characterization methods for wear resistant hard coatings: A review on recent progress

    Tkadletz, M., Schalk, N., Daniel, R., Keckes, J., Czettl, C. & Mitterer, C., 2016, In: Surface & coatings technology. 285, p. 31-46 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Combinatorial synthesis of Cr1−xAlxN and Ta1−xAlxN coatings using industrial scale co-sputtering

    Schalk, N., Weirather, T., Sabitzer, C., Hirn, S., Terziyska, V., Gangopadhyay, S., Czettl, C., Polcik, P., Kathrein, M. & Mitterer, C., 2016, In: Surface engineering. 32, 4, p. 252-257 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Diffusion Studies in the TiN/Cu Bilayer System and Beyond

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Greczynski, G., Lu, J., Schalk, N., Hultman, L. & Mitterer, C., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  39. Published

    Energy consumption and material fluxes in hard coating deposition processes

    Gassner, M., Rebelo De Figueiredo, M., Schalk, N., Franz, R., Weiß, C., Rudigier, H., Holzschuh, H., Bürgin, W., Pohler, M., Czettl, C. & Mitterer, C., 2016, In: Surface & coatings technology. 299, p. 49-55 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Finite element study of the influence of hard coatings on hard metal tool loading during milling

    Krajinovic, I., Daves, W., Tkadletz, M., Teppernegg, T., Klünsner, T., Schalk, N., Mitterer, C., Tritremmel, C., Ecker, W. & Czettl, C., 2016, In: Surface & coatings technology. 304, p. 134-141 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Influence of varying nitrogen partial pressures on microstructure, mechanical and optical properties of sputtered TiAlON coatings

    Schalk, N., Simonet Fotso, J., Holec, D., Jakopic, G., Fian, A., Terziyska, V., Daniel, R. & Mitterer, C., 2016, In: Acta materialia. 119, p. 26-34 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Investigation of the thermal stability of metastable Ti1-xAlxN hard coatings

    Großmann, B., Schalk, N., Czettl, C., Pohler, M. & Mitterer, C., 2016.

    Research output: Contribution to conference › Poster › Research

  43. Published

    Microstructure, mechanical and optical properties of TiAlON coatings sputter-deposited with varying oxygen partial pressures

    Schalk, N., Simonet Fotso, J., Holec, D., Fian, A., Jakopic, G., Terziyska, V., Daniel, R. & Mitterer, C., 2016, In: Journal of physics / D, Applied physics. 49, p. 1-9 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Modification of the thermal conductivity of PVD hard coatings by isothermal annealing in vacuum

    Tkadletz, M., Schalk, N., Pohler, M., Czettl, C., Bartholomé, K., Winkler, M. & Mitterer, C., 2016.

    Research output: Contribution to conference › Poster › Research

  45. Published

    Thermo-physical properties of wear resistant hard coatings

    Tkadletz, M., Schalk, N., Pohler, M., Czettl, C. & Mitterer, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  46. 2015
  47. E-pub ahead of print

    Cu diffusion in single-crystal and polycrystalline TiN barrier layers: A high-resolution experimental study supported by first-principles calculations

    Mühlbacher, M., Bochkarev, A. S., Mendez Martin, F., Sartory, B., Chitu, L., Popov, M., Puschnig, P., Spitaler, J., Ding, H., Schalk, N., Lu, J., Hultman, L. & Mitterer, C., 26 Aug 2015, (E-pub ahead of print) In: Journal of applied physics. 118.2015, 8, 085307.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Copper diffusion into single-crystalline TiN studied by transmission electron microscopy and atom probe tomography

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Schalk, N., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2015, In: Thin solid films. 574, p. 103-109

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Diffusion in the Cu/TiN thin film system studied by atom probe tomography correlated with transmission electron microscopy and first-principles calculations

    Mühlbacher, M., Mendez Martin, F., Lu, J., Schalk, N., Hultman, L. & Mitterer, C., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  50. Published

    Dry-blasting of CVD α-Al2O3 hard coatings: Influence of blasting media size, hardness and coating texture on the stress-depth gradients investigated by X-ray nanodiffraction

    Tkadletz, M., Schalk, N., Keckes, J., Krajinovic, I., Czettl, C. & Mitterer, C., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  51. Published

    Energy balance and material fluxes in hard coating deposition processes

    Gassner, M., Rebelo De Figueiredo, M., Schalk, N., Franz, R., Weiß, C., Rudigier, H., Holzschuh, H., Bürgin, W., Pohler, M., Czettl, C. & Mitterer, C., 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  52. Published

    Evaluation of TiN diffusion barrier layers with different microstructures by transmission electron microscopy and atom probe tomography

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Chitu, L., Lu, J., Schalk, N., Keckes, J., Hultman, L. & Mitterer, C., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  53. Published

    Functional thin films for display and microelectronics applications

    Mitterer, C., Jörg, T., Franz, R., Mühlbacher, M., Sartory, B., Mendez Martin, F. & Schalk, N., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 5, p. 231-234

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Influence of target composition and bias voltage on the microstructure, mechanical, tribological and thermal properties of arc evaporated Ti1-xAlxN hard coatings

    Großmann, B., Schalk, N., Czettl, C., Pohler, M. & Mitterer, C., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  55. Published

    Investigation of residual stress gradients in alpha-Al2O3 coatings introduced by post-deposition blasting treatments using synchrotron X-ray nanodiffraction

    Tkadletz, M., Keckes, J., Schalk, N., Krajinovic, I., Czettl, C. & Mitterer, C., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  56. Published

    Microstructure, mechanical and optical properties of TiAlON coatings sputter deposited with varying oxygen partial pressures

    Schalk, N., Simonet Fotso, J., Holec, D., Fian, A., Jakopic, G., Terziyska, V., Daniel, R. & Mitterer, C., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

Previous 1 2 3 Next
View graph of relations

Contact

Phone: 4240

Latest Research Output

View more (115)