Michael Meindlhumer

1 - 41 out of 41Page size: 50

Research output

  1. 2025
  2. Published

    Resolving the fundamentals of the J-integral concept by multi-method in situ nanoscale stress-strain mapping

    Meindlhumer, M., Alfreider, M., Sheshi, N., Hohenwarter, A., Todt, J., Rosenthal, M., Burghammer, M., Salvati, E., Keckes, J. & Kiener, D., 22 Feb 2025, In: Communications materials. 2025, 6, 15 p., 35.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Combined X-ray microdiffraction and micromechanical testing for direct measurement of thin film elastic constants

    Janknecht, R., Hahn, R., Koutná, N., Todt, J., Meindlhumer, M., Davidok, A., Riedl, H., Keckes, J. & Mayrhofer, P. H., 15 Feb 2025, In: Materials and Design. 252.2025, April, 11 p., 113720.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    20 kHz X-ray diffraction on Cu thin films explores thermomechanical fatigue at high strain-rates

    Ziegelwanger, T., Reisinger, M., Vedad, B., Hlushko, K., Van Petegem, S., Todt, J., Meindlhumer, M. & Keckes, J., 31 Jan 2025, In: Materials and Design. 251.2025, March, 9 p., 113664.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Harvesting superior intrinsic plasticity in nitride ceramics with negative stacking fault energy

    Huang, Y., Chen, Z., Meindlhumer, M., Hahn, R., Holec, D., Leiner, T., Maier-Kiener, V., Zheng, Y., Zhang, Z., Hatzenbichler, L., Riedl, H., Mitterer, C. & Zhang, Z., 23 Jan 2025, In: Acta Materialia. 286.2025, 1 March, 15 p., 120774.

    Research output: Contribution to journal › Article › Research › peer-review

  6. 2024
  7. Published

    Influence of increasing chromium content on additively manufactured tool steels: Microstructural and mechanical evolution before and after heat treatment

    Ofner, N., Bodner, S., Kunnas, P., Asci, A., Kutlesa, K., Stark, A., Höbenreich, P., Aumayr, C., Wu, L., Turk, C., Keckes, J. & Meindlhumer, M., 21 Dec 2024, In: Journal of Materials Research and Technology. 34.2025, January-February, p. 2715-2727 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Nanoscale stress and microstructure gradients across a buckled Mo-Cu bilayer: Cu self-annealing triggered by interface delamination

    Lassnig, A., Todt, J., Tkadletz, M., Žák, S., Mitterer, C., Medjahed, A. A., Burghammer, M., Keckes, J., Cordill, M. J. & Meindlhumer, M., 15 Oct 2024, In: Acta Materialia. 283.2025, 15 January, 15 p., 120465.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Backside metallization affects residual stress and bending strength of the recast layer in laser-diced Si

    Ziegelwanger, T., Reisinger, M., Matoy, K., Medjahed, A. A., Zalesak, J., Gruber, M., Meindlhumer, M. & Keckes, J., Oct 2024, In: Materials Science in Semiconductor Processing. 181, 108579.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Multimethod cross-sectional characterization approaching the limits of diamond monophase multilayers

    Meindlhumer, M., Grau, J., Sternschulte, H., Halahovets, Y., Siffalovic, P., Burghammer, M., Steinmüller-Nethl, D. & Keckes, J., 13 May 2024, In: Materials characterization. 212.2024, June, 15 p., 113973.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Toughness enhancement in TiN/Zr0.37Al0.63N1.09 multilayer films

    Lorentzon, M., Meindlhumer, M., Palisaitis, J., Greczynski, G., Keckes, J., Rosen, J., Hultman, L., Birch, J. & Ghafoor, N., 6 May 2024, In: Acta Materialia. 273.2024, 1 July, 14 p., 119979.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Hardness and fracture toughness enhancement in transition metal diboride multilayer films with structural variations

    Vidis, M., Fiantok, T., Gocnik, M., Svec, P. J., Nagy, S., Truchly, M., Izai, V., Roch, T., Satrapinskyy, L., Sroba, V., Meindlhumer, M., Grancic, B., Kus, P., Keckes, J. & Mikula, M., 21 Mar 2024, In: Materialia. 34.2024, May, 11 p., 102070.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Micromechanical Properties of Micro- and Nanocrystalline CVD Diamond Thin Films with Gradient Microstructures and Stresses

    Meindlhumer, M., Ziegelwanger, T., Grau, J., Sternschulte, H., Sztucki, M., Steinmüller-Nethl, D. & Keckes, J., 12 Jan 2024, In: Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films. 42.2024, 2, 12 p., 023401.

    Research output: Contribution to journal › Article › Research › peer-review

  14. 2023
  15. Published

    Intragranular thermal fatigue of Cu thin films: Near-grain boundary hardening, strain localization and voiding

    Hlushko, K., Ziegelwanger, T., Reisinger, M., Todt, J., Meindlhumer, M., Beuer, S., Rommel, M., Greving, I., Flenner, S., Kopecek, J., Keckes, J., Detlefs, C. & Yildirim, C., 1 Jul 2023, In: Acta Materialia. 253.2023, 1 July, 10 p., 118961.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Revealing dynamic-mechanical properties of precipitates in a nanostructured thin film using micromechanical spectroscopy

    Alfreider, M., Meindlhumer, M., Ziegelwanger, T., Daniel, R., Keckes, J. & Kiener, D., 25 Jun 2023, In: MRS Bulletin. 49.2024, 1, p. 49-58 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Local gradients of microstructure and residual stresses in Si device sidewalls separated by laser dicing

    Ziegelwanger, T., Meindlhumer, M., Todt, J., Reisinger, M., Matoy, K. & Keckes, J., 24 Apr 2023.

    Research output: Contribution to conference › Poster › Research

  18. Published

    Microstructural characterization and mechanical properties of nanocomposite AlCrSiN thin films

    Kutlesa, K., Meindlhumer, M. & Keckes, J., 2023.

    Research output: Contribution to conference › Poster › Research

  19. 2022
  20. Published

    Graded Inconel-stainless steel multi-material structure by inter- and intralayer variation of metal alloys

    Bodner, S., Hlushko, K., van de Vorst, L. T. G., Meindlhumer, M., Todt, J., Nielsen, M. A., Hooijmans, J. W., Saurwalt, J. J., Mirzaei, S. & Keckes, J., 19 Nov 2022, In: Journal of Materials Research and Technology. 21.2022, November-December, p. 4846-4859 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Precipitation-based grain boundary design alters Inter- to Trans-granular Fracture in AlCrN Thin Films

    Meindlhumer, M., Ziegelwanger, T., Zalesak, J., Hans, M., Löfler, L., Spor, S., Jäger, N., Stark, A., Hruby, H., Daniel, R., Holec, D., Schneider, J. M., Mitterer, C. & Keckes, J., 15 Sept 2022, In: Acta materialia. 237.2022, 15 September, 18 p., 118156.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Influence of Hatch Strategy on Crystallographic Texture Evolution, Mechanical Anisotropy of Laserbeam Powder Bed Fused S316L Steel

    Bodner, S., Hlushko, K., Kutleša, K., Todt, J., Renk, O., Meindlhumer, M., Resch, F., Nielsen, M.-A., Keckes, J. & Eckert, J., 2 Aug 2022, In: Advanced engineering materials. 2022, 25 p., 2200524.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Impact of Si on the high-temperature oxidation of AlCr(Si)N coatings

    Jäger, N., Meindlhumer, M., Zitek, M., Spor, S., Hruby, H., Nahif, F., Julin, J., Rosenthal, M., Keckes, J., Mitterer, C. & Daniel, R., 20 Feb 2022, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 100.2022, 20 February, p. 91-100 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. 2021
  25. Published

    Extracting information from noisy data: strain mapping during dynamic in situ SEM experiments

    Alfreider, M., Meindlhumer, M., Maier-Kiener, V., Hohenwarter, A. & Kiener, D., 14 Jun 2021, In: Journal of materials research (JMR). 36.2021, 11, p. 2291-2304 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Correlative cross-sectional characterization of nitrided, carburized and shot-peened steels: synchrotron micro-X-ray diffraction analysis of stress, microstructure and phase gradients

    Bodner, S. C., Meindlhumer, M., Ziegelwanger, T., Winklmayr, H., Hatzenbichler, T., Schindelbacher, C., Sartory, B., Krobath, M., Ecker, W., Schell, N. & Keckes, J., 3 Feb 2021, In: Journal of Materials Research and Technology. 11.2021, March-April, p. 1396-1410 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Evolution of structure, residual stress, thermal stability and wear resistance of nanocrystalline multilayered Al0.7Cr0.3N-Al0.67Ti0.33N coatings

    Spor, S., Jäger, N., Meindlhumer, M., Hruby, H., Burghammer, M., Nahif, F., Mitterer, C., Keckes, J. & Daniel, R., 2021, In: Surface & coatings technology. 425.2021, 15 November, 9 p., 127712.

    Research output: Contribution to journal › Article › Research › peer-review

  28. 2020
  29. E-pub ahead of print

    Evolution of stress fields during crack growth and arrest in a brittle-ductile CrN-Cr clamped-cantilever analysed by X-ray nanodiffraction and modelling

    Meindlhumer, M., Brandt, L. R., Zalesak, J., Rosenthal, M., Hruby, H., Kopecek, J., Salvati, E., Mitterer, C., Daniel, R., Todt, J., Keckes, J. & Korsunsky, A. M., 28 Nov 2020, (E-pub ahead of print) In: Materials and Design. 2021, 198, 16 p., 109365.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Multi-scale interface design of strong and damage resistant hierarchical nanostructured materials

    Daniel, R., Meindlhumer, M., Zalesak, J., Baumegger, W., Todt, J., Ziegelwanger, T., Keckes, J., Mitterer, C. & Keckes, J., Nov 2020, In: Materials and Design. 196, November, p. 1-11 109169.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Nanoindentation and microbending analyses of glassy and crystalline Zr([sbnd]Hf)[sbnd]Cu thin-film alloys

    Haviar, S., Kozák, T., Meindlhumer, M., Zítek, M., Opatová, K., Kučerová, L., Keckes, J. & Zeman, P., 15 Oct 2020, In: Surface and Coatings Technology. 399, 126139.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Nanoscale stress distributions and microstructural changes at scratch track cross-sections of a deformed brittle-ductile CrN-Cr bilayer

    Meindlhumer, M., Zalesak, J., Ecker, W., Rosenthal, M., Niese, S., Gawlitza, P., Hruby, H., Mitterer, C., Daniel, R., Keckes, J. & Todt, J., 5 Aug 2020, In: Materials & design. 195.2020, October, 16 p., 109023.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Nanoscale residual stress and microstructure gradients across the cutting edge area of a TiN coating on WC –Co

    Meindlhumer, M., Jäger, N., Spor, S., Rosenthal, M., Keckes, J., Hruby, H., Mitterer, C., Daniel, R., Keckes, J. & Todt, J., 29 Feb 2020, In: Scripta materialia. 182.2020, June, p. 11-15 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Microstructural evolution and thermal stability of AlCr(Si)N hard coatings revealed by in-situ high-temperature high-energy grazing incidence transmission X-ray diffraction

    Jäger, N., Meindlhumer, M., Spor, S., Hruby, H., Julin, J., Stark, A., Nahif, F., Keckes, J., Mitterer, C. & Daniel, R., 18 Jan 2020, In: Acta materialia. 186.2020, March, p. 545-554 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Cross-sectional and High-Temperature Structure-Property Relationships in Nanocrystalline Thin Films

    Meindlhumer, M., 2020

    Research output: Thesis › Doctoral Thesis

  36. 2019
  37. Published

    Stress-controlled decomposition routes in cubic AlCrN films assessed by in-situ high-temperature high-energy grazing incidence transmission X-ray diffraction

    Meindlhumer, M., Klima, S., Jäger, N., Stark, A., Hruby, H., Mitterer, C., Keckes, J. & Daniel, R., 2 Dec 2019, In: Scientific reports (London : Nature Publishing Group). 2019, 9, 14 p., 18027.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Cross-sectional gradients of residual stresses, microstructure and phases in a nitrided steel revealed by 20 µm synchrotron X-ray diffraction

    Bodner, S. C., Ziegelwanger, T., Meindlhumer, M., Holcova, J., Todt, J., Schell, N. & Keckes, J., Oct 2019, In: Metallurgia Italiana. 2019, 10, p. 7-11 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Biomimetic hard and tough nanoceramic Ti–Al–N film with self-assembled six-level hierarchy

    Meindlhumer, M., Zalesak, J., Pitonak, R., Todt, J., Sartory, B., Burghammer, M., Stark, A., Schell, N., Daniel, R., Keckes, J., Lessiak, M., Köpf, A., Weißenbacher, R. & Keckes, J., 28 Apr 2019, In: Nanoscale. 11.2019, 16, p. 7986-7995 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Anisotropy of fracture toughness in nanostructured ceramics controlled by grain boundary design

    Daniel, R., Meindlhumer, M., Baumegger, W., Todt, J., Zalesak, J., Ziegelwanger, T., Mitterer, C. & Keckes, J., 2019, In: Materials and Design. 161.2019, January, p. 80-85 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. 2018
  42. Published

    Evolution of structure and mechanical properties of nanocrystalline multi-layered arc-evaporated AlCrN-AlTiN coatings upon thermal loading revealed by X-ray nanodiffraction and tribological investigation

    Klima, S., Jäger, N., Meindlhumer, M., Hruby, H., Keckes, J. & Daniel, R., 2018.

    Research output: Contribution to conference › Poster › Research

  43. Published

    New insights into the oxidation behaviour of AlCrSiN coatings and an new approach to avoid trans-interface diffusion at elevated temperatures

    Jäger, N., Klima, S., Meindlhumer, M., Hruby, H., Mitterer, C., Keckes, J. & Daniel, R., 2018.

    Research output: Contribution to conference › Poster › Research

  44. 2016
  45. E-pub ahead of print

    Grain boundary design of thin films: Using tilted brittle interfaces for multiple crack deflection toughening

    Daniel, R., Meindlhumer, M., Baumegger, W., Zalesak, J., Sartory, B., Burghammer, M. C., Mitterer, C. & Keckes, J., 2 Oct 2016, (E-pub ahead of print) In: Acta materialia. 122.2017, 1 January, p. 130-137 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. E-pub ahead of print

    Fracture toughness enhancement of brittle nanostructured materials by spatial heterogeneity: A micromechanical proof for CrN/Cr and TiN/SiOx multilayers

    Daniel, R., Meindlhumer, M., Zalesak, J., Sartory, B., Zeilinger, A., Mitterer, C. & Keckes, J., 13 May 2016, (E-pub ahead of print) In: Materials & design. 104.2016, 15 August, p. 227-234 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    In-situ Observation of Cross- Sectional Microstructural Changes and Stress Distributions in Fracturing TiN Thin Film during Nanoindentation

    Zeilinger, A., Todt, J., Krywka, C., Müller, M., Ecker, W., Sartory, B., Meindlhumer, M., Stefenelli, M., Daniel, R., Mitterer, C. & Keckes, J., 7 Mar 2016, In: Scientific reports (London : Nature Publishing Group). 6:22670, p. 1-14 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Micromechanical Characterization of Self-Organized Ti1-xAlxN Nanolamellae: The Influence of Interface Coherency and Phase Alteration on Fracture Behaviour

    Meindlhumer, M., 2016

    Research output: Thesis › Master's Thesis

  49. Published

    Spatial material heterogeneity: A strategy for fracture toughness enhancement of nanostructured films

    Daniel, R., Zalesak, J., Mitterer, C., Sartory, B., Meindlhumer, M. & Keckes, J., 2016.

    Research output: Contribution to conference › Presentation › Research

  50. 2015
  51. Published

    Microstructural design: a successful strategy for fracture toughness enhancement of hard coatings

    Daniel, R., Zalesak, J., Mitterer, C., Sartory, B., Meindlhumer, M. & Keckes, J., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

View graph of relations

Latest Research Output

View more (41)