Gregor Karl Mori

1 - 267 out of 267Page size: 500

Research output

  1. 2024
  2. Published

    Assessing the hydrogen embrittlement susceptibility of an existing L360NB natural gas pipeline steel for 100 % hydrogen transport

    Ahmed Hamed Mahmoud Eid Gouda, A. H. M. E. G., Posch-Peperkorn, C., Maierhofer, J., Beschliesser, M., Fink, S. & Mori, G. K., 19 Dec 2024, In: Corrosion science. 244.2025, March, 11 p., 112648.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    In situ mapping of elemental dissolution at ultra-trace levels during aqueous corrosion of Al alloys

    Wagner, S., Mukhametzianova, G., Eskinja, M., Moshtaghi, M., Mori, G. & Prohaska, T., 4 Jul 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. E-pub ahead of print

    Hydrogen diffusivity, uptake and embrittlement of solution annealed and cold deformed austenitic stainless steel 1.4435 at hydrogen pressures up to 1000 bar and 200 °C

    Eichinger, M., Pengg, J., Zwittnig, D. & Mori, G. K., 17 Jun 2024, (E-pub ahead of print) In: Corrosion science. 235.2024, 15 July, 16 p., 112219.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Influence of Mo carbides and two-stage tempering methodology on the susceptibility of medium carbon martensitic steel to hydrogen embrittlement

    Eskinja, M., Winter, G., Schnideritsch, H., Klarner, J., Razumovskiy, V. I., Moshtaghi, M. & Mori, G. K., 14 Jun 2024, In: Engineering Failure Analysis. 163.2024, Part B, September, 17 p., 108562.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Hydrogen uptake and embrittlement of steels under highest pressures

    Eichinger, M. & Mori, G. K., 23 May 2024.

    Research output: Contribution to conference › Poster › Research

  7. E-pub ahead of print

    Peculiarity of hydrogen absorption in duplex steels: Phase-selective lattice swelling and stress evolution

    Pogrielz, T., Eichinger, M., Weiser, A., Todt, J., Hohenwarter, A., Ascii, A., Sarac, B., Brandl, D., Ressel, G., Jary, M., Dlouhý, A., Mori, G. K. & Keckes, J., 27 Apr 2024, (E-pub ahead of print) In: Scripta Materialia. 248.2024, 15 July, 7 p., 116142.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Mapping elemental solutes at sub-picogram levels during aqueous corrosion of Al alloys using diffusive gradients in thin films (DGT) with LA-ICP-MS

    Mukhametzianova, G., Wagner, S., Eskinja, M., Moshtaghi, M., Mori, G. K. & Prohaska, T., 16 Apr 2024, In: Analytical and bioanalytical chemistry. 416.2024, June, p. 3373–3388 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. E-pub ahead of print

    Investigations on the hydrogen embrittlement tendency of K55 for underground storage applications using hollow probe specimens

    Eichinger, M., Zwittnig, D. & Mori, G. K., 19 Mar 2024, (E-pub ahead of print) In: Materials letters. 364.2024, 1 June, 5 p., 136330.

    Research output: Contribution to journal › Letter › peer-review

  10. Published

    On the applicability of carbon steels K55 and L80 for underground hydrogen storage

    Loder, B., Bhosale, S., Eichinger, M., Mori, G. K., Rokosz, K., Fournier, C., Réveillère, A., Bulidon, N., Moli-Sanchez, L. & Mendibide, C., 22 Feb 2024, In: International Journal of Hydrogen Energy . 56.2024, 22 February, p. 232-241 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    The Hydrogen Uptake of L360 Pipeline in Varied H2 Environments

    Gouda, A. H. M. E. & Mori, G. K., 2024.

    Research output: Contribution to conference › Poster › Research

  12. 2023
  13. E-pub ahead of print

    On the hydrogen uptake of line pipe steels L80 and P110 under gaseous hydrogen charging up to 1000 bar and 200 ◦C

    Eichinger, M., Pengg, J., Raab, S. & Mori, G. K., 21 Nov 2023, (E-pub ahead of print) In: International Journal of Hydrogen Energy . 50.2024, Part A, 2 January, p. 388-399 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. E-pub ahead of print

    From unlikely pairings to functional nanocomposites: FeTi–Cu as a model system

    Schweiger, L., Kiener, D., Burtscher, M., Schafler, E., Mori, G. K., Spieckermann, F. & Eckert, J., 17 Oct 2023, (E-pub ahead of print) In: Materials today advances. 2023, 20, 13 p., 100433.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Extending DGT-based chemical imaging to materials science: In situ assessment of aluminium corrosion at high spatial resolution

    Mukhametzianova, G., Wagner, S., Moshtaghi, M., Eskinja, M., Mori, G. K. & Prohaska, T., 11 Oct 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    Hydrogen trapping at micro/nano-sized secondary hardening precipitates in high-strength martensitic stainless steels

    Pichler, S., Mori, G. K., Safyari, M. & Moshtaghi, M., 31 Aug 2023, ICSI2023.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Influence of Mo content on susceptibility of medium carbon martensitic steels to hydrogen embrittlement

    Eskinja, M., Winter, G., Klarner, J., Schnideritsch, H., Mori, G. K. & Moshtaghi, M., 30 Aug 2023, ICSI2023.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Inhibition of grain growth by pearlite improves hydrogen embrittlement susceptibility of the ultra-low carbon ferritic steel: the influence of H-assisted crack initiation and propagation mechanisms

    Pichler, S., Bendo, A., Mori, G. K., Safyari, M. & Moshtaghi, M., 29 Aug 2023, In: Journal of materials science. 58.2023, September, p. 13460 13475 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    On the Change in Hydrogen Diffusion and Trapping Behaviour of Pearlitic Rail Steel at Different Stages of Production

    Eichinger, M., Loder, B., Tkadletz, M., Schnideritsch, H., Klösch, G. & Mori, G. K., 23 Aug 2023, In: Materials. 16.2023, 17, 15 p., 5780.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Hydrogen resistance and trapping behaviour of a cold-drawn ferritic-pearlitic steel wire

    Truschner, M., Pengg, J., Loder, B., Köberl, H., Gruber, P., Moshtaghi, M. & Mori, G. K., Jun 2023, In: International Journal of Materials Research. 114.2023, 6, p. 439-452 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Hydrogen Applicability of Steels in Gas Storage Facilities

    Bhosale, S., Moshtaghi, M. (Co-editor) & Mori, G. K. (Co-editor), 11 May 2023, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  22. Published

    On the hydrogen uptake of line pipe steels L80 and P110 under gaseous hydrogen charging up to 1000 bar and 200 °C

    Eichinger, M. & Mori, G. K., 11 May 2023.

    Research output: Contribution to conference › Poster › Research

  23. Published

    The effect of HPAM polymer for enhanced oil recovery on corrosion behaviour of a carbon steel and interaction with the inhibitor under simulated brine conditions

    Moshtaghi, M., Eskinja, M., Mori, G. K., Grießer, T., Safyari, M. & Cole, I., 22 Mar 2023, In: Corrosion science. 217.2023, June, 20 p., 111118.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    On The Applicability Of Welded J55 Line Pipe Steel For Underground Hydrogen Storage

    Loder, B., Mori, G. K., Klarner, J., Fiedler, M. & Willidal, T., 20 Mar 2023, AMPP Annual Conference & Expo 2023: Paper No. 19131. 15 p. 19131

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    The Interaction of Quaternary Ammonium Compounds based Corrosion Inhibitor with Carbon Steel in CO2 Saturated NaCl Solution

    Eskinja, M., Moshtaghi, M., Mori, G. K., Hönig, S. & Zehethofer, G., 20 Mar 2023, p. 1. 11 p.

    Research output: Contribution to conference › Paper › peer-review

  26. E-pub ahead of print

    Hydrogen embrittlement characteristicsin cold-drawn high-strength stainless steel wires

    Truschner, M., Kroll, R., Eichinger, M., Keplinger, A., Engelberg, D. L. & Mori, G. K., 13 Mar 2023, (E-pub ahead of print) In: Corrosion science. 216.2023, 15 May, 111109.

    Research output: Contribution to journal › Article › Research › peer-review

  27. E-pub ahead of print

    Corrosion of 1.4016 Ferritic Steel by Urea at High Temperature

    Galakhova, A., Kadisch, F., Mori, G. K., Heyder, S., Wieser, H., Sartory, B., Wosik, J., Schwarz, S. & Burger, S., 9 Mar 2023, (E-pub ahead of print) In: Journal of Materials Engineering and Performance. 32.2023, October, p. 9153–9162 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Diffusive gradients in thin films (DGT) combined with LA-ICP-MS for elemental mapping of localised Aluminium corrosion

    Mukhametzianova, G., Wagner, S., Moshtaghi, M., Eskinja, M., Mori, G. K. & Prohaska, T., 31 Jan 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    Mechanisms of hydrogen absorption, trapping and release during galvanostatic anodization of high-strength aluminum alloys

    Safyari, M., Mori, G. K., Ucsnik, S. & Moshtaghi, M., Jan 2023, In: Journal of Materials Research and Technology. 22.2023, January-February, p. 80-88 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Repurposing an Existing Natural Gas Pipeline for 100% Hydrogen Transport

    Hamed Mahmoud Eid Gouda, A., Moshtaghi, M. & Mori, G. K., 2023.

    Research output: Contribution to conference › Poster › Research

  31. Published

    Repurposing Natural Gas Pipelines for 100% Hydrogen Transport

    Hamed Mahmoud Eid Gouda, A., Moshtaghi, M. & Mori, G. K., 2023.

    Research output: Contribution to conference › Poster › Research

  32. 2022
  33. Published

    Cyclic voltammetric analysis of copper dissolution in acidic chloride electrolytes containing copper ions

    Körbler, N., Mori, G. K., Gerold, E., Antrekowitsch, H., Klocek, J. & Krivec, T., 14 Nov 2022. 18 p.

    Research output: Contribution to conference › Paper › peer-review

  34. E-pub ahead of print

    Effect of cold deformation on the stress corrosion cracking resistance of a high-strength stainless steel

    Truschner, M., Janda, A., Bodner, S. C., Keplinger, A. & Mori, G. K., 6 Nov 2022, (E-pub ahead of print) In: Journal of materials science. 57.2022, November, p. 20447–20461 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Hydrogen Storage in Porous Metalhydrid - Polymer Hybride Materials

    Schweiger, L., Spieckermann, F., Kiener, D., Mori, G. K. & Eckert, J., 27 Sept 2022.

    Research output: Contribution to conference › Poster › Research

  36. Published

    In situ mapping of localised aluminium corrosion using Diffusive Gradients in Thin films (DGT) coupled to LA-ICP-MS

    Mukhametzianova, G., Wagner, S., Moshtaghi, M., Eskinja, M., Mori, G. K. & Prohaska, T., 6 Sept 2022.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    The influence of microstructure on hydrogen-assisted fracture in high-strength aluminum alloys

    Moshtaghi, M., Safyari, M., Hojo, T., Mori, G. K. & Kuramoto, S., 29 Aug 2022, The influence of microstructure on hydrogen-assisted fracture in high-strength aluminum alloys. 36800

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. E-pub ahead of print

    High temperature corrosion behavior of alloys in reducing HCL and H2S containing atmospheres: Thermodynamical and experimental assessment

    Nimmervoll, M., Mori, G. K., Bucher, E., Hönig, S. & Haubner, R., 3 Aug 2022, (E-pub ahead of print) In: Materials and Corrosion. 73.2022, 12, p. 1979-2003 25 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Combined thermal desorption spectroscopy, hydrogen visualization, HRTEM and EBSD investigation of a Ni–Fe–Cr alloy: The role of hydrogen trapping behavior in hydrogen-assisted fracture

    Moshtaghi, M., Safyari, M. & Mori, G. K., 19 Jul 2022, In: Materials Science and Engineering A. 848.2022, 19 July, 10 p., 143428.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Hydrogen Storage in Porous Metalhydrid - Polymer Hybride Materials

    Schweiger, L., Spieckermann, F., Kiener, D., Mori, G. K. & Eckert, J., 19 Jul 2022.

    Research output: Contribution to conference › Poster › Research

  41. Published

    Hydrogen trapping and desorption affected by ferrite grain boundary types in shielded metal and flux-cored arc weldments with Ni addition

    Moshtaghi, M., Loder, B., Safyari, M., Willidal, T., Hojo, T. & Mori, G. K., 18 May 2022, In: International Journal of Hydrogen Energy . 47, 47, p. 20676-20683 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    High-temperature corrosion of austenitic alloys in HCl and H2S containing atmospheres under reducing conditions

    Nimmervoll, M., Mori, G. K., Hönig, S. & Haubner, R., 15 May 2022, In: Corrosion science. 200.2022, May, 17 p., 110214.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Investigation of the effects of temperature and exposure time on the corrosion behavior of a ferritic steel in CO2 environment using the optimized linear polarization resistance method

    Eškinja, M., Moshtaghi, M., Hönig, S., Zehethofer, G. & Mori, G. K., 30 Apr 2022, In: Results in Materials. 14.2022, June, 8 p., 100282.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Wasserstoffspeicherung in porösen Metallhydrid Polymer Hybridmaterialien

    Schweiger, L., Spieckermann, F., Kiener, D., Mori, G. K. & Eckert, J., 20 Apr 2022.

    Research output: Contribution to conference › Poster › Research

  45. Accepted/In press

    Influence Of Cold Deformation On Hydrogen Embrittlement By Determining The Critical Hydrogen Concentration In High Strength Steel For Wire Applications

    Truschner, M., Deutsch, J. (Co-editor), Pengg, J. (Co-editor), Mori, G. K. (Co-editor), Köberl, H. (Co-editor) & Gruber, P. J. (Co-editor), 8 Mar 2022, (Accepted/In press).

    Research output: Contribution to conference › Paper › peer-review

  46. Published

    Hydrogen absorption rate and hydrogen diffusion in a ferritic steel coated with a micro- or nanostructured ZnNi coating

    Moshtaghi, M., Safyari, M. & Mori, G., Jan 2022, In: Electrochemistry Communications. 134.2022, January, 6 p., 107169.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Hydrogen Charging of Armco iron and L80 steel in various Electrolytes

    Eichinger, M., Truschner, M., Zwittnig, D., Trautmann, A. & Mori, G. K., 2022. 11 p.

    Research output: Contribution to conference › Paper › peer-review

  48. Published

    InnoBLA III: Auswirkungen der thermischen Bodenbehandlung auf die Mobilität von Schwermetallen und die Korrosion von Heizlanzen

    Sattler, T. M., Vollprecht, D., Mori, G. K., Berrer, I., Kern, J. & Riedl, J., 2022, Recy&DepoTech 2022: POSTER-Konferenzband. p. 63-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. 2021
  50. Published

    High-temperature high-pressure SCC testing of corrosion-resistant alloys

    Galakhova, A., Mori, G. K. & Prattes, K., 3 Dec 2021, In: Materials and Corrosion. 72, 12, p. 1831-1842 12 p.

    Research output: Contribution to journal › Review article › peer-review

  51. Published

    Corrosion of N10276 in a H2S, HCl, and CO2 Containing Atmosphere at 480 °C and 680 °C

    Nimmervoll, M., Mori, G. K., Bucher, E., Schmid, A. & Haubner, R., 12 Nov 2021, In: Metals. 11.2021, 11, 13 p., 1817.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Parameter optimization for electropolishing of molybdenum in sulfuric acid

    Eichinger, M. & Mori, G. K., 20 Sept 2021. 1 p.

    Research output: Contribution to conference › Poster › Research

  53. Published

    The Basics of Hydrogen Uptake in Iron and Steel

    Truschner, M., Trautmann, A. & Mori, G. K., 10 Sept 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 166.2021, 9, p. 443-449 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Hydrogen Embrittlement of Steels in High Pressure H2 Gas and Acidified H2S-saturated Aqueous Brine Solution

    Trautmann, A., Mori, G. K. & Loder, B., 6 Sept 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 166.2021, 9, p. 450-457 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Corrosion of Stainless Steel by Urea at High Temperature

    Galakhova, A., Kadisch, F., Mori, G. K., Heyder, S., Wieser, H., Sartory, B. & Burger, S., 30 Aug 2021, In: Corrosion and materials degradation. 2.2021, 3, p. 461-473 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. E-pub ahead of print

    Effect of Varying H2S Content on High-Temperature Corrosion of Ferritic and Austenitic Alloys in a Simulated Pyrolysis Process of Post-Consumer Plastics

    Nimmervoll, M., Mori, G. K., Bucher, E., Hönig, S. & Haubner, R., 29 Jun 2021, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 166.2021, 9, p. 424-433 10 p.

    Research output: Contribution to journal › Article › Research

  57. Published

    Surface sulphide formation on high-temperature corrosion resistant alloys in a H2S-HCl-CO2 mixed atmosphere

    Nimmervoll, M., Schmid, A., Mori, G. K., Hönig, S. & Haubner, R., 1 Apr 2021, In: Corrosion science. 181.2021, 1 April, 11 p., 109241.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Behavior of high-temperature corrosion resistant alloys in HCl and H2S containing atmospheres

    Nimmervoll, M., Mori, G. K., Hönig, S. & Haubner, R., 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  59. Published

    Galvanic corrosion of molybdenum alloys and oxides in contact with copper for thin film transistors using evans diagrams

    Riedl, J., Mori, G., Schmidt, H. & Köstenbauer, H., 2021, In: Digest of technical papers. 52, S2, p. 588-590 3 p.

    Research output: Contribution to journal › Conference article › peer-review

  60. 2020
  61. Published

    Cathodic and Anodic Stress Corrosion Cracking of a New High-Strength CrNiMnMoN Austenitic Stainless Steel

    Truschner, M., Deutsch, J., Mori, G. K. & Keplinger, A., 19 Nov 2020, In: Metals : open access journal . 10.2020, 11, 12 p., 1541.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Metallographic Documentation of the Degradation of Iron and Nickel Based Alloys in HCl and H2S Containing Environments, between 480 – 680 °C

    Schmid, A., Mori, G. K. & Haubner, R., 16 Nov 2020, Defect and diffusion forum. 405 ed. Vol. 2020. p. 26-32 7 p. (Defect and diffusion forum (Online-Ressource) ).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  63. Published

    Hochtemperaturkorrosion an Stählen und Nickelbasislegierungen in HCl und H2S haltiger Mischgasatmosphäre

    Haubner, R., Nimmervoll, M., Schmid, A. & Mori, G. K., 4 Nov 2020, Tagungsband 3-Länder-Korrosionstagung. Frankfurt/Main, 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Depassivation and repassivation of stainless steels by stepwise pH change

    Mujanović, E., Zajec, B., Legat, A., Kosec, T., Kovač, J., Mori, G., Hönig, S. & Zehethofer, G., 2 Oct 2020, In: Materials and Corrosion. 72.2021, 3, p. 421-433 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Cycled hydrogen permeation through Armco iron – A joint experimental and modeling approach

    Drexler, A., Siegl, W., Ecker, W., Tkadletz, M., Klösch, G., Schnideritsch, H., Mori, G. K., Svoboda, J. & Fischer, F.-D., 23 Sept 2020, In: Corrosion science. 176.2020, November, 11 p., 109017.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Resistance to stress corrosion cracking of a new high strength stainless steel wire material

    Truschner, M., Trautmann, A. (Co-editor), Deutsch, J. (Co-editor), Mori, G. K. (Co-editor) & Keplinger, A. (Co-editor), 7 Sept 2020.

    Research output: Contribution to conference › Poster › Research

  67. Published

    Hydrogen Uptake and Embrittlement of Carbon Steels in Various Environments

    Trautmann, A., Mori, G., Oberndorfer, M., Bauer, S., Holzer, C. & Dittmann, C., 14 Aug 2020, In: Materials. 13.2020, 16, 16 p., 3604.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Effect of Polishing on Electrochemical Behavior and Passive Layer Composition of Different Stainless Steels

    Rokosz, K., Solecki, G., Mori, G., Fluch, R., Kapp, M. & Lahtinen, J., 1 Aug 2020, In: Materials. 13.2020, 15, 12 p., 3402.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Hydrogen Uptake of Duplex 2205 at H2 Partial Pressures up to 100 bar

    Trautmann, A., Mori, G. K., Siegl, W., Truschner, M., Pfeiffer, J., Kapp, M., Keplinger, A., Oberndorfer, M. & Bauer, S., Jan 2020, In: Berg- und hüttenmännische Monatshefte : BHM. 165.2020, 1, p. 40-45 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. 2019
  71. Published

    Activation and Repassivation of Stainless Steels in Artificial Brines as a Function of pH

    Mujanovic, E., Zajec, B., Kosec, T., Legat, A., Hönig, S., Zehethofer, G. & Mori, G., 20 Nov 2019, In: Materials. 12.2019, 23, 11 p., 3811.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Hydrogen Uptake of Duplex 2205 at H2 partial pressures up to 100 bar

    Trautmann, A., Mori, G., Siegl, W., Truschner, M., Pfeiffer, J., Kapp, M., Keplinger, A., Oberndorfer, M. & Bauer, S., 30 Sept 2019, p. 338-345. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  73. Published

    Hydrogen charging of Armco Iron and L80 Steel in various electrolytes

    Truschner, M., Trautmann, A., Siegl, W. & Mori, G. K., 9 Sept 2019.

    Research output: Contribution to conference › Poster › Research

  74. Published

    High Temperature Corrosion of Steel X15CrNiSi25-21 (1.4841) in a Mixed Gas Atmosphere – Sample Preparation and Damage Mechanism

    Schmid, A., Mori, G., Hönig, S., Strobl, S. & Haubner, R., 3 Jul 2019, In: Praktische Metallographie/Practical Metallography. 56.2019, 7, p. 457-468 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Hydrogen trapping in heat treated and deformed Armco iron

    Siegl, W., Mori, G. K., Ecker, W., Klarner, J., Klösch, G., Winter, G., Schnideritsch, H. & Drexler, A., 24 Mar 2019. 12 p.

    Research output: Contribution to conference › Paper

  76. Published

    Susceptibility of Selected Steel Grades to Hydrogen Embrittlement - Simulating Field Conditions by Performing Laboratory Wheel Tests With Autoclaves

    Trautmann, A., Mori, G. K., Oberndorfer, M. & Bauer, S., Mar 2019. 10 p.

    Research output: Contribution to conference › Paper › peer-review

  77. Published

    The influence of NaCl and CaCl2 induced high temperature corrosion on the aqueous corrosion resistance of stainless steels

    Mori, G., Vidic, K. J., Bucher, E., Yasir, M., Hornauer, D., Nachtnebel, M., Fitzek, H. & Schroettner, H., 20 Feb 2019, In: Materials and Corrosion. 70.2019, 6, p. 1071-1086 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. 2018
  79. Published

    Model about the course of corrosion reactions of austenitic steels in a H2S, HCl and CO2 containing atmosphere at 680°C

    Schmid, A., Mori, G. K., Bucher, E. & Haubner, R., 19 Oct 2018, In: Oxidation of metals. 91.2018, 14 February, 10 p., https://doi.org/10.1007/s11085-018-9876-z.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Corrosion behaviour of Fe and Ni based alloys in the reactor atmosphere of a thermal cracking process

    Schmid, A., Mori, G. K., Haubner, R. & Hönig, S., 10 Sept 2018.

    Research output: Contribution to conference › Presentation › Research

  81. Published

    Contribution to the Understanding of Hydrogen Trapping in Armco Iron

    Siegl, W., Mori, G. K. & Zauchner, T., 29 May 2018.

    Research output: Contribution to conference › Poster › Research

  82. Published

    Comparison of the high-temperature chloride-induced corrosion between duplex steel and Ni based alloy in presence of H2S

    Schmid, A., Mori, G. K., Hönig, S., Weil, M., Strobl, S. & Haubner, R., 5 May 2018, In: Corrosion science. 139, 15 July 2018, p. 76 - 82 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    NaCl and CaCl2-induced high temperature corrosion of automotive exhaust components

    Vidic, K. & Mori, G. K., 15 Apr 2018, p. 1-15. 15 p.

    Research output: Contribution to conference › Paper › peer-review

  84. Published

    Behaviour of S31400 and S32205 steels in HCl- and H2S-containing gas atmospheres under a low oxygen partial pressure between 480 – 680 °C

    Schmid, A., Mori, G. K., Haubner, R., Weil, M. & Hönig, S., 27 Feb 2018, In: Materials and Corrosion. DOI: 10.1002/maco.201709992, p. 1328 - 1337

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Ungewöhnliche Rissbildung an einem Autoklaven bei Versuchen zum thermischen Cracken von anthropogenen Ressourcen

    Schmid, A., Mori, G. K., Strobl, S. & Haubner, R., 18 Jan 2018, In: Practical metallography = Praktische Metallographie. Vol. 55, 4, p. 244-253

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Corrosion behaviour of Fe and Ni based alloys in the reactor atmosphere of a thermal cracking process

    Schmid, A., Mori, G., Hönig, S. & Haubner, R., 1 Jan 2018, European Corrosion Congress, EUROCORR 2018. p. 44-58 15 p. (European Corrosion Congress, EUROCORR 2018).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. 2017
  88. Published

    Depletion zones and intergranular corrosion of superaustenitic stainless steel Alloy 926

    Mori, G. K., Prohaska, M., Lackner, R., Rokosz, K., Albu, M. & Kothleitner, G., 1 Mar 2017, In: Materials and Corrosion. 68.2017, 3, p. 284-294 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Corrosion of various Fe and Ni based alloys in HCl, H2S containing environments, with low oxygen partial pressure, at 680 °C

    Alexander, S., Mori, G., Strobl, S., Haubner, R. & Hönig, S., 1 Jan 2017.

    Research output: Contribution to conference › Paper › peer-review

  90. Published

    UNS S31400 stainless steel as reactor material in a thermal cracking process

    Schmid, A. & Mori, G., 1 Jan 2017, Corrosion Conference and Expo 2017. p. 3053-3062 10 p. (NACE - International Corrosion Conference Series; vol. 5).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. 2016
  92. Published

    Corrosion Behavior Influenced by Quenching Conditiones of HTGN Martensitic Stainless Steel

    Borchert, M., Mori, G., Kozeschnik, E., Povoden-Karadeniz, E., Bischof, M. & Tomandl, A., 28 Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  93. Published

    Hydrogen embrittlement of high strength steel under in situ corrosive charging conditions and tensile load

    Scharf, R., Muhr, A., Stellnberger, K.-H., Faderl, J., Holzer, C. & Mori, G. K., 21 Jun 2016, In: Materials and Corrosion. 68.2017, 1, p. 95-104 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Aufstickung und Korrosionsverhalten martensitischer rostfreier Stähle

    Borchert, M. & Mori, G., 11 May 2016.

    Research output: Contribution to conference › Presentation › Research

  95. Published

    Spannungsrisskorrosionsprüfung von Hochfesten Stählen in der Befestigungstechnik

    Borchert, M., Mori, G., Bischof, M. & Tomandl, A., 8 Apr 2016.

    Research output: Contribution to conference › Poster › Research

  96. Published

    Hydrogen embrittlement of DP-1000 flat steel sheet: Influence of mechanical properties, specimen geometry, pre-damaging and electrolytically zinc galvanizing

    Scharf, R., Muhr, A., Luckeneder, G. H., Larour, P., Mraczek, K., Rehrl, J., Leomann, F., Stellnberger, K.-H., Faderl, J. & Mori, G. K., 1 Mar 2016, In: Materials and Corrosion. 67.2016, 3, p. 239-250 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Influence of different types of localized corrosion on the fatigue behavior of an austenitic stainless steel

    Visser, A., Mori, G., Pippan, R., Kapp, M., Fluch, R., Leitner, H., Panzenböck, M. & Holper, B., 1 Jan 2016, NACE International - Corrosion Conference and Expo 2016. p. 3201-3210 10 p. (NACE - International Corrosion Conference Series; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    3D Atom Probe Characterisation of Passive Layers on Stainless Steels

    Mori, G., Visser, A., Turk, C., Mendez Martin, F., Kapp, M., Fluch, R. & Leitner, H., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  99. Published

    Die Angst des Maschinenbauers vor der Chemie

    Mori, G., 2016.

    Research output: Contribution to conference › Presentation › Education

  100. Published

    EVALUATION OF PERFORMANCE OF AN AMINE BASED AND AN IMIDAZOLINE BASED GAS AND GAS CONDENSATE INHIBITOR

    Mori, G., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  101. Published

    Improvement of oxidation and corrosion resistance of Mo thin films by alloying with Ta

    Hofer-Roblyek, A. M., Mori, G., Fian, A., Winkler, J. & Mitterer, C., 2016, In: Thin solid films. 599, p. 1-6 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Spannungsrisskorrosion an Türhaltern aus hochfestem Aluminium

    Mori, G., 2016.

    Research output: Contribution to conference › Presentation › Research

  103. 2015
  104. Published

    Effect of high temperature nitrding on corrosion properties of martensitic stainless steels

    Borchert, M. & Mori, G., 4 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  105. Published

    Evaluation of Performance of an Amine Based and an Imidazoline Based Gas Condensate Inhibitor Tested with a High Velocity Laboratory Test Rig

    Prethaler, A., Mori, G. & Rosenberg, E., 2 Jul 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160.2015, 7, p. 346-351 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    Evaluation of Performance of an Amine Based and an Imidazoline Based Gas and Gas Condensate Inhibitor Tested With High Velocity Laboratory Test Rig

    Prethaler, A., Mori, G., Havlik, W., Zehethofer, G., Hönig, S., Rosenberg, E. & Rückemann, M., 15 Mar 2015, p. Paper Number: NACE-2015-5713. 12 p.

    Research output: Contribution to conference › Paper › peer-review

  107. Published

    Assessing hydrogen susceptibility of press-hardened & high strength steels using various testing methods

    Muhr, A., Kolnberger, S., Zwettler, F., Luckeneder, G., Faderl, J., Stellnberger, K. H., Mori, G. & Kurz, T., 1 Jan 2015, European Corrosion Congress, EUROCORR 2015. ASMET, 1 p. (European Corrosion Congress, EUROCORR 2015; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  108. Published

    Corrosion in a thermal cracking process

    Schmid, A. & Mori, G., 1 Jan 2015, European Corrosion Congress, EUROCORR 2015. ASMET, 1 p. (European Corrosion Congress, EUROCORR 2015; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  109. Published

    Corrosion resistance of hot-dip galvanised steel in soils

    Ziebermayr, S., Fleischanderl, M., Stellnberger, K. H., Linhardt, P. & Mori, G., 1 Jan 2015, European Corrosion Congress, EUROCORR 2015. ASMET, 1 p. (European Corrosion Congress, EUROCORR 2015; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  110. Published

    Influence of different heat treatments on sensitization of alloy 625

    Mori, G., Lackner, R., Winter, F., Rinner, H. & Egger, R., 1 Jan 2015, European Corrosion Congress, EUROCORR 2015. ASMET, 1 p. (European Corrosion Congress, EUROCORR 2015; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  111. Published

    Impact of microstructural characteristics on the corrosion morphology of high strength brazing sheets

    Kremmer, T., Antrekowitsch, H., Oberhauser, P., Hanko, G. & Mori, G., 2015, Proceedings of EMC 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  112. 2014
  113. Published

    Investigation of the corrosion behavior of Zn-Al-Mg hot-dip galvanized steel in alternating climate tests

    Keppert, T. A., Luckeneder, G., Stellnberger, K. H., Mori, G. & Antrekowitsch, H., 1 Dec 2014, In: Corrosion. 70, 12, p. 1238-1248 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  114. Published

    The effect of magnesium on the corrosion of hot-dip galvanized steel in chloride containing environments

    Keppert, T. A., Luckeneder, G., Stellnberger, K. H., Commenda, C., Mori, G. & Antrekowitsch, H., 1 Sept 2014, In: Materials and Corrosion. 65, 9, p. 871-880 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  115. Published

    EVALUATION OF PERFORMANCE OF GAS AND GAS CONDENSATE INHIBITORS WITH A LABORATORY TWO PHASE FLOW

    Prethaler, A. & Mori, G., 20 Mar 2014.

    Research output: Contribution to conference › Paper › peer-review

  116. Published

    Corrosion behaviour of nitriding steel grade coated with amorphous a-C:H:Si coating

    Dipolt, C. & Mori, G., 1 Jan 2014, International Corrosion Conference series / National Association of Corrosion Engineers: Corrosion 2014. (NACE - International Corrosion Conference Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  117. Published

    Erosion-corrosion rates of corrosion-resistant alloys under high-velocity multiphase conditions

    Mori, G., Vogl, T., Haberl, J., Havlik, W., Schöberl, T. & Hosemann, P., 1 Jan 2014, In: Corrosion. 70, 6, p. 579-590 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  118. Published

    Internal corrosion of automotive exhaust systems

    Hashimoto, R., Mori, G., Tröger, U. & Wieser, H., 1 Jan 2014, International Corrosion Conference series / National Association of Corrosion Engineers. (NACE - International Corrosion Conference Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  119. Published

    On the slowdown of the crack propagation rate of austenitic stainless steels in corrosive environment

    Kapp, M., Fluch, R., Martinez, C., Pippan, R., Mori, G., Vichytil, C., Sonnleitner, R. & Panzenböck, M., 1 Jan 2014, International Corrosion Conference series / National Association of Corrosion Engineers. (NACE - International Corrosion Conference Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  120. Published

    Accelerated SCC Testing of Stainless Steels According to Corrosion Resistance Classes

    Borchert, M., Mori, G., Bischof, M. & Tomandl, A., 2014, Accelerated SCC Testing of Stainless Steels According to Corrosion Resistance Classes. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  121. Published

    AMAG TopClad UHS: Der hochfeste Werkstoffverbund für hochbeanspruchte Wärmetauscher-Anwendungen

    Hanko, G., Oberhauser, P., Kremmer, T., Antrekowitsch, H., Kratzer, M., Teichert, C. & Mori, G., 2014, 8. Ranshofener Leichtmetalltage, Leichtmetalle - Prozesse - Anwendungen: Zukunftstechnologien als Basis für neue Mobilitätskonzepte. p. 18-28

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  122. Published

    Correlation between Streicher and EPR Test

    Lackner, R., Mori, G., Egger, R. & Winter, F., 2014, Correlation between Streicher and EPR Test. p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  123. Published

    Corrosion Fatigue of Austenitic Stainless Steel in Different Hot Chloride Solutions

    Visser, A., Mori, G., Panzenböck, M. & Pippan, R., 2014, Corrosion Fatigue of Austenitic Stainless Steel in Different Hot Chloride Solutions. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  124. Published

    Determination of Trapping Parameters and the Chemical Diffusion Coefficient from Hydrogen Permeation Experiments

    Svoboda, J., Mori, G., Prethaler, A. & Fischer, F. D., 2014, In: Corrosion science. 82, p. 93-100

    Research output: Contribution to journal › Article › Research › peer-review

  125. Published

    High strength brazing sheet with improved corrosion resistance

    Kremmer, T., Hanko, G., Oberhauser, P., Hajek, A., Antrekowitsch, H. & Mori, G., 2014, DVS-Berichte: Aluminium Brazing 8th International Congress. p. 67-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  126. Published

    Influence of Tantalum on structure, electrical resistivity and corrosion behavior of sputtered molybdenum films

    Hofer-Roblyek, A. M., Reinfried, N., Mori, G., Winkler, J. & Mitterer, C., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  127. Published

    Precipitation and dissolution of critical phases in Alloy 625

    Lackner, R., Mori, G., Egger, R. & Winter, F., 2014, Precipitation and dissolution of critical phases in Alloy 625. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  128. Published

    Schwingungsrisskorrosion rostfreier austenitischer Stähle in heißen chloridhaltigen Lösungen

    Visser, A., Mori, G., Panzenböck, M., Kapp, M., Leitner, H., Fluch, R. & Holper, B., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 300-301

    Research output: Contribution to journal › Article › Research › peer-review

  129. Published

    Sensitization of as Rolled and Stable Annealed Alloy 625

    Lackner, R., Mori, G., Egger, R. & Winter, F., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 12-22

    Research output: Contribution to journal › Article › Research › peer-review

  130. Published

    The effect of sulphate, phosphate, nitrate and acetate on the corrosion behaviour of Zn-Al-Mg hot-dip galvanised steel

    Keppert, T., Luckeneder, G., Stellnberger, K.-H., Mori, G. & Antrekowitsch, H., 2014, In: Materials and Corrosion. p. 560-568

    Research output: Contribution to journal › Article › Research › peer-review

  131. 2013
  132. Published

    Chemical composition of real condensate in automotive exhaust systems

    Hashimoto, R., Mori, G., Yasir, M., Tröger, U. & Wieser, H., 1 Dec 2013, EUROCORR 2013 - European Corrosion Congress. (EUROCORR 2013 - European Corrosion Congress).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  133. Published

    Corrosion fatigue properties of austenitic stainless steels with different composition and strength in chloride solutions

    Visser, A., Vichytil, C., Mori, G., Vidic, J., Pippan, R., Panzenböck, M. & Kapp, M., 1 Dec 2013, EUROCORR 2013 - European Corrosion Congress. (EUROCORR 2013 - European Corrosion Congress).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  134. Published

    Sensitization of stable and as rolled annealed Alloy 625

    Lackner, R., Mori, G., Egger, R., Winter, F., Albu, M. & Kothleitner, G., 1 Dec 2013, EUROCORR 2013 - European Corrosion Congress. (EUROCORR 2013 - European Corrosion Congress).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  135. Published

    Biokraftstoffe und Korrosion

    Havlik, W., Thayer, K., Mori, G. & Holzer, C., 2013, Biokraftstoffe und Korrosion. p. 133-140

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  136. Published

    Corrosion fatigue and repassivation investigations of CrNiMo austenitic stainless steels in chloride environment

    Visser, A., Vichytil, C., Mori, G., Vidic, K., Pippan, R., Panzenböck, M., Kapp, M. & Fluch, R., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 384-390

    Research output: Contribution to journal › Article › Research › peer-review

  137. Published

    Corrosion of Molybdenum in Cooling Water

    Holzer, C., Vichytil, C., Mori, G. & Linke, C., 2013, Corrosion of Molybdenum in Cooling Water. p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  138. Published

    Corrosion Research in Austria

    Mori, G., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 347-347

    Research output: Contribution to journal › Article › Research › peer-review

  139. Published

    Efficiency of two gas and gas condensate inhibitors in a laboratory two phase flow

    Prethaler, A., Vogl, T., Mori, G., Havlik, W., Zehethofer, G., Hönig, S. & Rosenberg, E., 2013, Efficiency of two gas and gas condensate inhibitors in a laboratory two phase flow. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  140. Published

    Evaluation of two different Inhibitor Testing Methods for High Superficial Flow Conditions

    Prethaler, A., Vogl, T., Mori, G., Havlik, W., Zehethofer, G. & Hönig, S., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 371-376

    Research output: Contribution to journal › Article › Research › peer-review

  141. Published

    Influence of Key Parameters on NACE Standard TM0177 DCB Sour Gas Test

    Moderer, L., Holzer, C., Mori, G., Klösch, G., Klarner, J. & Sonnleitner, R., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 348-354

    Research output: Contribution to journal › Article › Research › peer-review

  142. Published

    Influence of the pH value on the corrosion of Zn-Al-Mg hot-dip galvanized steel sheets in chloride containing environments

    Keppert, T., Mori, G., Luckeneder, G. & Stellnberger, K.-H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 355-363

    Research output: Contribution to journal › Article › Research › peer-review

  143. Published

    Investigations on susceptibility to intergranular corrosion of thermo-mechanically rolled corrosion-resistant materials 316L and Alloy 825

    Prohaska, M., Mori, G., Grill, R., Tischler, G. & Mitsche, S., 2013, In: Materials and Corrosion. p. 290-299

    Research output: Contribution to journal › Article › Research › peer-review

  144. Published

    Modelling the Influence of Trapping on Hydrogen Permeation in Metals

    Fischer, F. D., Mori, G. & Svoboda, J., 2013, In: Corrosion science. 76, p. 382-389

    Research output: Contribution to journal › Article › Research › peer-review

  145. Published

    Molybdenum and Chromium Depletion at Grain Boundary Precipitates Alloy 926

    Lackner, R., Mori, G., Egger, R., Tischler, G. & Prohaska, M., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 364-370

    Research output: Contribution to journal › Article › Research › peer-review

  146. Published

    Molybdenum corrosion in PVD processes

    Holzer, C., Vichytil, C., Mori, G. & Linke, C., 2013, Molybdenum corrosion in PVD processes. p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  147. Published

    Sensitization of stable and as rolled Alloy 625

    Lackner, R., Mori, G., Egger, R., Winter, F., Albu, M. & Kothleitner, G., 2013, Sensitization of stable and as rolled Alloy 625. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  148. Published

    UNS 06625: PRECIPITATION AND SENSITIZATION

    Lackner, R., Mori, G., Egger, R. & Tischler, G., 2013, UNS 06625: PRECIPITATION AND SENSITIZATION. p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  149. 2012
  150. Published

    Study of sensitization and different heating cycles on stainless steels used for automotive exhaust components

    Yasir, M., Mori, G., Wieser, H., Reller, A. & Höppel, H. W., 1 Sept 2012, In: Materials and Corrosion. 63, 9, p. 763-776 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  151. Published

    applicability and limitations of the epr-test as a substitute for ASTM G28 A Streicher-Test

    Mori, G., Prohaska, M. & Tischler, G., 2012, EMCR 2012. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  152. Published

    Crack growth rates and corrosion fatigue of austenitic stainless steels in high chloride solutions

    Vichytil, C., Mori, G., Pippan, R., Panzenböck, M. & Fluch, R., 2012, Key engineering materials. Vol. 488-489. p. 97-100 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  153. Published

    Effect of isothermal and thermo-mechanical heat treatment on phase precipitation and corrosion properties of Alloy 926

    Lackner, R., Mori, G., Prohaska, M., Egger, R. & Tischler, G., 2012, Effect of isothermal and thermo-mechanical heat treatment on phase precipitation and corrosion properties of Alloy 926. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  154. Published

    Effect of microalloying elements on sour service grades with higher strength

    Moderer, L., Mori, G. & Schwarz, S., 2012, Corrosion 2012: March 11–15, 2012 Salt Lake City, Utah. Vol. NACE-2012-1552. p. 1-15 1552

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  155. Published

    Einfluss von Inhibitoren auf strömungsinduzierte CO2 Korrosion

    Vogl, T. & Mori, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  156. Published

    Fatigue and cracking behaviour of austenitic CrNiMo and CrMnN steels in chloride containing environment at elevated temperature

    Vichytil, C., Mori, G., Pippan, R., Panzenböck, M. & Fluch, R., 2012, Fracture Mechanics for Durability, Reliability and Safety. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  157. Published

    Improvement of the corrosion behaviour of molybdenum films by alloying with tantalum

    Hofer, A. M., Reinfried, N., Mori, G., Winkler, J. & Mitterer, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  158. Published

    influence of alloying elements on the passivity and repassivation of austenitic stainless steels

    Mori, G., Vichytil, C., Umgeher, A. & Fluch, R., 2012, Eurocorr 2012. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  159. Published

    Influence of pH value on the corrosion of Zn-Al-Mg hot-dip galvanized steel sheets in chloride containing environments

    Keppert, T., Luckeneder, G., Stellnberger, K. H. & Mori, G., 2012, Corrosion 2012. p. 3978 - 3992 (International Corrosion Conference series / National Association of Corrosion Engineers; vol. 5).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  160. Published

    Inhibitor-testing by a new high superficial velocity flow-loop system

    Vogl, T., Reisl, T., Zehethofer, G., Mori, G., Havlik, W. & Honig, S., 2012, Corrosion Conference and Expo. 2012. Vol. 4. p. 2917-2930

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  161. Published

    Molybdenum and Chromium Depletion at Grain Boundary Principia in Alloy 926

    Lackner, R., Mori, G., Prohaska, M., Egger, R. & Tischler, G., 2012, Molybdenum and Chromium Depletion at Grain Boundary Principia in Alloy 926. p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  162. Published

    Schäden an Hängeseilbrücken

    Mori, G., 2012, 3-Länder-Korrosionstagung 2012. p. 16-22

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  163. Published

    Schwingungsrisskorrosion an CrNiMo und CrMnN Austeniten

    Vichytil, C. & Mori, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  164. 2011
  165. Published

    Efficiency of corrosion inhibitors in a multiphase flow

    Vogl, T., Mori, G., Ehgartner, S., Havlik, W. & Zehethofer, G., 1 Dec 2011, European Corrosion Congress 2011, EUROCORR 2011. p. 1358-1369 12 p. (European Corrosion Congress 2011, EUROCORR 2011; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  166. Published

    Impact of production parameters on corrosion properties of stainless steel Alloy 926 evaluated by means of a deformation dilatometer and the DL-EPR method

    Prohaska, M., Mori, G., Tischler, G. & Grill, R., 1 Dec 2011, European Corrosion Congress 2011, EUROCORR 2011. 1 p. (European Corrosion Congress 2011, EUROCORR 2011; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  167. Published

    Corrosion behavior of Zn-Al-Mg coated steel in different environments

    Schürz, S., Mori, G., Luckeneder, G. H., Fleischanderl, M. & Stellnberger, K. H., 11 Jul 2011, International Corrosion Conference series / National Association of Corrosion Engineers. (NACE - International Corrosion Conference Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  168. Published

    Corrosion pr0operties of different highly alloyed clad materials for offshore applications manufactured by a new thermo-mechanical rolling process

    Prohaska, M., Mori, G., Hofstätter, H., Tischler, G. & Grill, R., 11 Jul 2011, International Corrosion Conference series / National Association of Corrosion Engineers. (NACE - International Corrosion Conference Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  169. Published

    Corrosion studies of different metal coatings for automotive exhaust applications

    Yasir, M., Mori, G., Özer, S. C., Haider, F. & Wieser, H., 11 Jul 2011, International Corrosion Conference series / National Association of Corrosion Engineers. (NACE - International Corrosion Conference Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  170. Published

    A New Testing Method for Lifetime Prediction of Automotive Exhaust Silencers

    Yasir, M., Mori, G., Wieser, H., Schattenkirchner, M. & Hogl, M., 22 May 2011, In: International journal of corrosion. 2011, 5 p., 689292.

    Research output: Contribution to journal › Article › Research › peer-review

  171. Published

    Corrosion Fatigue Investigations of CrNiMoN Austenitic Stainless Steels

    Vichytil, C., Mori, G., Panzenböck, M. & Fluch, R., 2011, NACE Corrosion 2011, Conference and EXPO. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  172. Published

    Corrosion Properties of different highly alloyed clad materials for offshore applications manufactured by a new thermomechanical rolling process

    Prohaska, M., Mori, G., Hofstätter, H. & Tischler, G., 2011, Corrosion 2011. p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  173. Published

    Cracking behaviour under cyclic loading of austenitic stainless steels with different alloying concepts

    Vichytil, C., Mori, G., Panzenböck, M., Pippan, R. & Fluch, R., 2011, 18th International Corrosion Congress, Corrosion Control, Contributing to a Sustainable Future for All. p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  174. Published

    Efficiency of Corrosion Inhibitors in Multiphase Flow

    Vogl, T., Mori, G., Havlik, W. & Zehethofer, G., 2011, Efficiency of Corrosion Inhibitors in Multiphase Flow. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  175. Published

    Evaluation of CR/MO Depletion zones of alloy 926

    Mori, G., Prohaska, M., Wernig, T., Schmied, F., Teichert, C., Albu, M., Kothleitner, G., Tischler, G. & Grill, R., 2011, ICC 2011. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  176. Published

    Impact of production parameters on corrosion properties of Alloy 926

    Mori, G., Prohaska, M., Grill, R. & Tischler, G., 2011, Eurocorr 2011. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  177. Published

    Schwingungsrisskorrosion chemisch beständiger Stähle in chloridhältigen Medien

    Mori, G., 2011, 10. Tagung Gefüge und Bruch. p. 76-83

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  178. 2010
  179. Published

    Galvanic corrosion and stress corrosion cracking of steel and aluminum bolts in magnesium die cast alloy AZ91

    Gerstmayr, G., Mori, G. & Eichlseder, W., 21 May 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. p. 145-150 6 p. (Magnesium Technology).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  180. Published

    Application of Electric Voltages for Improved Protection of MgO Refractory Material

    Sauerbrey, R., Mori, G., Majcenovic, C. & Harmuth, H., 2010, In: Refractories worldforum. 2, p. 105-110

    Research output: Contribution to journal › Article › Research › peer-review

  181. Published

    Application of high resolution techniques to characterize sensitization of a highly alloyed material

    Prohaska, M., Mori, G., Arndt, M., Rashkova, B., Seyeux, A., Marcus, P., Tischler, G. & Grill, R., 2010, EUROCORR 2010, The European Corrosion Congress. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  182. Published

    Application of the DL-EPR - method for detecting sensitization to intergranular corrosion in thermomechanically rolled corrosion-resistant alloys 316L, 825L and 926L

    Prohaska, M., Wernig, T., Perek, J. P., Mori, G., Tischler, G. & Grill, R., 2010, 2nd International Conference Corrosion and Material Protection. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  183. Published

    Chemistry of corrosion products on Zn-Al-Mg alloy coated steel

    Schürz, S., Luckeneder, G. H., Fleischanderl, M., Mack, P., Gsaller, H., Kneißl, A. & Mori, G., 2010, In: Corrosion science. 52, p. 3271-3279

    Research output: Contribution to journal › Article › Research › peer-review

  184. Published

    Corrosion Fatigue Investigations on Austenitic Stainless Steels with Different Alloying Concepts

    Vichytil, C., Mori, G., Panzenböck, M., Sonnleitner, R. & Fluch, R., 2010, NACE Corrosion 2010, Conference and EXPO. p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  185. Published

    Corrosion fatigue of a manganese-nitrogen stabilized austenitic stainless steel

    Sonnleitner, R., Mori, G., Panzenböck, M. & Fluch, R., 2010, In: Materials and Corrosion. 61, p. 97-104

    Research output: Contribution to journal › Article › Research › peer-review

  186. Published

    Corrosion product characterization and suface analysis of Zn-Al-Mg coated steel

    Schürz, S., Mori, G., Fleischanderl, M., Luckeneder, G. H. & Mack, P., 2010, Corrosion 2010. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  187. Published

    Corrosion protection of Zn-Al-Mg coated steel with and without plastic deformation in chloride containing environment

    Schürz, S., Luckeneder, G. H., Fleischanderl, M., Raab, A.-E. & Mori, G., 2010, EUROCORR 2010, The European Corrosion Congress. p. 1-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  188. Published

    Erosion Corrosion and Synergistic Effects under High Velocity Multiphase Conditions

    Mori, G., Vogl, T., Haberl, J., Havlik, W. & Schöberl, T., 2010, Corrosion 2010. p. 1-23

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  189. Published

    Fracture mechanic investigations of austenitic stainless steels in different cold worked states

    Vichytil, C., Mori, G., Panzenböck, M., Sonnleitner, R., Pippan, R. & Fluch, R., 2010, EUROCORR 2010, The European Corrosion Conference. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  190. Published

    Galvanic corrosion and stress corrosion cracking of steel and aluminium bolts in magnesium die cast alloy AZ91

    Gerstmayr, G., Mori, G. & Eichlseder, W., 2010, Magnesium Technology 2010. p. 145-150

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  191. Published

    Key parameters influencing erosion corrosion of passive materials in a three phase flow

    Vogl, T., Mori, G., Havlik, W. & Zehethofer, G., 2010, Proceedings of the Eurocorr 2009. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  192. Published

    On the applicability of high strengh self-tapping aluminium bolts in magnesium nut materials for automotive applications

    Gerstmayr, G., Mori, G., Leitner, H. & Eichlseder, W., 2010, In: Materials and Corrosion. 61, p. 379-387

    Research output: Contribution to journal › Article › Research › peer-review

  193. Published

    On the substitution of conventional corrosion tests by an electrochemical potentiokinetic reactivation test

    Prohaska, M., Kanduth, H., Mori, G., Tischler, G. & Grill, R., 2010, In: Corrosion science.

    Research output: Contribution to journal › Article › Research › peer-review

  194. Published

    Problems in Quantification of Pitting Corrosion

    Gelz, J., Yasir, M., Mori, G. & Wieser, H., 2010, Proceedings of 13th Middle East Corrosion Conference 2010. p. 1-17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  195. Published

    Spannungs- und Schwingungsrisskorrosion

    Mori, G., Sonnleitner, R., Holzleitner, S., Panzenböck, M. & Pippan, R., 2010, In: MP materials testing : Materialprüfung . p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  196. Published

    Spannungs- und Schwingungsrisskorrosion, Gemeinsamkeiten und Unterschiede

    Mori, G., Sonnleitner, R., Holzleitner, S., Panzenböck, M. & Pippan, R., 2010, In: MP materials testing : Materialprüfung . Volume 52, p. 42-51

    Research output: Contribution to journal › Article › Research › peer-review

  197. 2009
  198. Published

    Appearance and mechanism of crevice of corrosion in exhaust mufflers

    Yasir, M., Mori, G., Reller, A. & Wieser, H., 1 Dec 2009, 49th Annual Conference of the Australasian Corrosion Association 2009: Corrosion and Prevention 2009. p. 92-98 7 p. (49th Annual Conference of the Australasian Corrosion Association 2009: Corrosion and Prevention 2009).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  199. Published

    High resolution investigations on chloride induced SCC of stainless steels

    Mori, G., Holzleitner, S., Fluch, R. & Schmuki, P., 1 Dec 2009, European Corrosion Congress 2009, EUROCORR 2009. p. 3393-3401 9 p. (European Corrosion Congress 2009, EUROCORR 2009; vol. 5).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  200. Published

    The effect of cold working on the corrosion fatigue behaviour of a crnimon austenitic stainless steel

    Sonnleitner, R., Mori, G., Panzenböck, M. & Fluch, R., 1 Jan 2009, International Corrosion Conference series / National Association of Corrosion Engineers. (NACE - International Corrosion Conference Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  201. Published

    Appearance and Mechanism of Crevice Corrosion in Exhaust Mufflers

    Yasir, M., Mori, G. & Wieser, H., 2009, Proceedings of Corrosion and prevention 2009. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  202. Published

    Corrosion behaviour and properties of Zn-Al-Mg coated steel

    Schürz, S., Luckeneder, G. H., Fleischanderl, M., Stellnberger, K.-H., Preis, K. & Mori, G., 2009, EUROCORR 2009, The European Corrosion Congress. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  203. Published

    Corrosion behaviour of Zn-Al-Mg coated steel sheet in sodium chloride-containing environment

    Schürz, S., Fleischanderl, M., Luckeneder, G. H., Preis, C., Haunschmied, T., Mori, G. & Kneißl, A., 2009, In: Corrosion science. p. 2355-2363

    Research output: Contribution to journal › Article › Research › peer-review

  204. Published

    Corrosion Fatigue of Austenitic Stainless Steels

    Sonnleitner, R., Mori, G., Panzenböck, M. & Fluch, R., 2009, EUROCORR 2009, The European Corrosion Congress. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  205. Published

    Corrosion protection of MgO electrodes at 1400 °C

    Sauerbrey, R., Mori, G., Majcenovic, C. & Harmuth, H., 2009, In: Corrosion science. p. 1-5

    Research output: Contribution to journal › Article › Research › peer-review

  206. Published

    Corrosion Resistance of Different Stainless Steels in Automotive Exhaust Industry

    Yasir, M., Mori, G., Reller, A. & Wieser, H., 2009, Proceedings of Eurocorr 2009. p. 1-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  207. Published

    CRACK GROWTH RATE AND FRACTURE MECHANIC INVESTIGATIONS OF AN AUSTENITIC STAINLESS STEEL

    Vichytil, C., Mori, G., Sonnleitner, R., Panzenböck, M. & Fluch, R., 2009, EUROCORR 2009, The European Corrosion Conference. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  208. Published

    Einfluß der Herstellparamter auf die Korrosionseigenschaften des thermomechanischen, austenitischen Stahles Alloy 926

    Wernig, T. & Mori, G., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  209. Published

    Erosion Corrosion Behavior of Materials used in Oil and Gas Production

    Haberl, J., Mori, G., Wagner, P., Vogl, T. & Havlik, W., 2009, Proceedings of the Eurocorr 2009. p. 1-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  210. Published

    Erosionskorrosion

    Haberl, J. & Mori, G., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  211. Published

    How do microstructure and PREN affect the erosion corrosion behaviour of stainless steels?

    Haberl, J., Mori, G., Wagner, P., Havlik, W. & Hosemann, P., 2009,

    Proceedings of the Corrosion 2009 Conference & Expo

    .     p. 1-17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  212. Published

    Inhibitoreinfluss auf die Erosionskorrosion

    Vogl, T. & Mori, G., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  213. Published

    Interkristalline Korrosion in der Öl- und Gasförderung

    Prohaska, M. & Mori, G., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  214. Published

    Korrosion

    Mori, G., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  215. Published

    Oxidation of sputtered thin films of molybdenum alloys at ambient conditions

    List, A., Mitterer, C., Mori, G., Winkler, J., Reinfried, N. & Knabl, W., 2009, Proc. 17th International Plansee Seminar. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  216. Published

    Possibilities and limitations of replacing a conventional corrosion test with an electrochemical potentiokinetic reactivation method using the example of alloy 625

    Prohaska, M., Wernig, T., Mori, G., Tischler, G. & Grill, R., 2009, EUROCORR 2009, The European Corrosion Congress. p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  217. Published

    Sauergasbeständigkeit neuer hochfester Ölfeldrohre

    Moderer, L. & Mori, G., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  218. Published

    Schwingungsrisskorrosion an hochfesten Austeniten

    Vichytil, C. & Mori, G., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  219. Published

    Schwingungsrisskorrosion an hochfesten austenitischen Stählen

    Sonnleitner, R. & Mori, G., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  220. Published

    The Effect of Cold Working on the Corrosion Fatigue Behavior of a CrNiMoN Austenitic Stainless Steel

    Sonnleitner, R., Mori, G., Panzenböck, M. & Fluch, R., 2009, NACE Corrosion 2009, Conference & EXPO. p. 1-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  221. 2008
  222. Published

    Corrosion-fatigue properties of surface-treated surgical implant stainless steel X2CrNiMol8-15-3

    Mori, G., Wieser, H. & Zitter, H., 1 Dec 2008, Environment-Induced Cracking of Materials. Elsevier Ltd, p. 405-417 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  223. Published

    Nanoscale characterization of HT-9 exposed to lead bismuth eutectic at 550 °C for 3000 h

    Hosemann, P., Hawley, M. E., Koury, D., Welch, J., Johnson, A. L., Mori, G., Li, N. & Maloy, S. A., 15 Nov 2008, In: Journal of nuclear materials. 381, 3, p. 211-215 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  224. Published

    Corrosion fatigue of solution annealed austenitic stainless steels

    Sonnleitner, R., Mori, G., Panzenböck, M., Fluch, R. & Eglsäer, S., 1 Jan 2008. 1 p.

    Research output: Contribution to conference › Paper › peer-review

  225. Published

    AFM and MFM characterization of oxide layers grown on stainless steels in lead bismuth eutectic

    Hosemann, P., Hawley, M. & Mori, G., 2008, In: Journal of nuclear materials. p. 289-292

    Research output: Contribution to journal › Article › Research › peer-review

  226. Published

    Applying a Multi Method Approach to Chloride Induced SCC of two Austenitic Cr-Ni-Mo-N Stainless Steels

    Holzleitner, S., Kranister, W., Mori, G. & Schmuki, P., 2008, Corrosion 2008. p. 1-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  227. Published

    Characterization of oxide layers grown on D9 austenitic stainless steel in lead bismuth eutectic

    Hosemann, P., Hawley, M., Koury, D. & Mori, G., 2008, In: Journal of nuclear materials. p. 323-330

    Research output: Contribution to journal › Article › Research › peer-review

  228. Published

    Corrosion Fatigue and Cold Deformation of a CrMnN Stainless Steel

    Sonnleitner, R., Mori, G., Panzenböck, M., Fluch, R. & Eglsäer, S., 2008, 17th International Corrosion Congress. p. 1-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  229. Published

    Corrosion Fatigue of a CrMnN Stainless Steel

    Sonnleitner, R., Mori, G., Panzenböck, M., Fluch, R. & Eglsäer, S., 2008, NACE International Corrosion Conference and EXPO. 2008: Proceedings of a meeting held 16-20 March 2008, New Orleans, Louisiana. Houston, p. 1-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  230. Published

    Corrosion Fatigue of a CrNiMoN Austenitic Stainless Steel

    Sonnleitner, R., Mori, G., Panzenböck, M. & Fluch, R., 2008, EUROCORR 2008, The European Corrosion Congress. p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  231. Published

    Erosion Corrosion Behaviour of Austenitic and Martensitic Stainless Steels

    Haberl, J., Mori, G., Wagner, P. & Havlik, W., 2008, Eurocorr 2008 The European Corrosion Congress. p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  232. Published

    Erosion-corrosion of carbon steels in a laboratory: Three-phase flow

    Feyerl, J., Mori, G., Holzleitner, S., Haberl, J., Oberndorfer, M. & Havlik, W., 2008, In: Corrosion. p. 175-186

    Research output: Contribution to journal › Article › Research › peer-review

  233. Published

    Influence of Impact Angles on Penetration Rates of CRAs exposed to a High Velocity Multiphase Flow

    Haberl, J., Mori, G., Wagner, P., Havlik, W. & Hosemann, P., 2008,

    Proceedings of the Corrosion 2008 Conference & Expo

    .     p. 1-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  234. Published

    Influence of Strength on the Erosion Corrosion Rate of Stainless Steels

    Haberl, J., Mori, G., Wagner, P., Havlik, W. & Hosemann, P., 2008, Proceedings of the 17th International Corrosion Conference. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  235. Published

    Investigations on Anode Quality in Copper Electrorefining

    Wenzl, C., Filzwieser, I., Mori, G. & Pesl, J., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. p. 91-96

    Research output: Contribution to journal › Article › Research › peer-review

  236. Published

    Nanoscale characterization of HT-9 exposed to lead bismuth eutectic at 550°C for 3000h

    Hosemann, P., Hawley, M. E. & Mori, G., 2008, In: Journal of nuclear materials. p. 211-215

    Research output: Contribution to journal › Article › Research › peer-review

  237. Published

    Quantifying Pitting Corrosion in an Automotive Exhaust Application

    Kämmerer, B. & Mori, G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  238. Published

    Statistic Slip Step Evaluation of Austenitic Stainless Steels

    Gürkan, N., Hlawacek, G., Teichert, C., Sonnleitner, R. & Mori, G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  239. 2007
  240. Published

    Electrochemical and SCC behavior of highly alloyed austenitic stainless steels in different chloride containing media

    Holzleitner, S., Mori, G., Falk, H. & Eglsaeer, S., 1 Dec 2007, International Corrosion Conference series / National Association of Corrosion Engineers. p. 74771-747717 672947 p. (NACE - International Corrosion Conference Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  241. Published

    Breakaway Velocities of Materials for Oil and Gas Production in a High Velocity Multiphase Flow

    Haberl, J., Mori, G., Oberndorfer, M. & Havlik, W., 2007,

    Proceedings of the Corrosion 2007 Conference & Expo

    .     p. 1-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  242. Published

    Breakaway Velocities of Materials for Oil and Gas Production in High Velocity

    Mori, G., Haberl, J., Feyerl, J., Holzleitner, S., Oberndorfer, M. & Havlik, W., 2007, Corrosion 2007. p. 1-17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  243. Published

    Development of a high chromium martensitic steel proposed for roller bearing application

    Faleschini, M., Peißl, S. K., Mori, G., Ebner, R. & Eglsäer, S., 2007, Development of a high chromium martensitic steel proposed for roller bearing application. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  244. Published

    Electrochemical and SCC Behavior of Highly Alloyed Stainless Steels in Different Chloride Containing Solutions

    Holzleitner, S., Mori, G., Falk, H. & Eglsäer, S., 2007, Electrochemical and SCC Behavior of Highly Alloyed Stainless Steels in Different Chloride Containing Solutions. Omnipress, p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  245. Published

    Entwicklungen bei hochfesten nichtrostenden Stählen für Befestigungselemente

    Hochörtler, G., Eglsäer, S. & Mori, G., 2007, Entwicklungen bei hochfesten nichtrostenden Stählen für Befestigungselemente. p. 120-128

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  246. Published

    Erosion Corrosion Rates of Stainless Steels in a High Velocity Multi Phase Flow

    Haberl, J., Mori, G., Oberndorfer, M. & Havlik, W., 2007,

    Proceedings of the Stainless Steel World 2007 Conference & Expo

    .     p. 1-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  247. Published

    Evaluation Methods of Erosion Corrosion Specimens exposed to a High Velocity Multi Phase Flow

    Haberl, J., Mori, G., Oberndorfer, M. & Havlik, W., 2007, Proceedings of the European Corrosion Congress EUROCORR 2007. p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  248. Published

    Passivation Behaviour of Copper Anodes with Various Chemical

    Mubarok, Z., Antrekowitsch, H. & Mori, G., 2007,

    TMS 2007 136 th Annual Meeting & Exhibiton (collected proceedings)

    .     p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  249. Published

    Problems Developed on the Electrolysis of Copper Anodes with High Contents of Nickel, Antimony, Tin and Lead

    Mubarok, Z., Antrekowitsch, H., Mori, G., Lossin, A. & Leuprecht, G., 2007, Proceedings of the Copper/Cobre 2007. p. 59-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  250. 2006
  251. Published

    Erosion Corrosion of Carbon Steels in a Laboratory Three Phase Flow

    Feyerl, J., Mori, G., Holzleitner, S., Oberndorfer, M. & Havlik, W., 2006, Corrosion 2006. p. 1-17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  252. Published

    Influence of chromium, molybdenum and cobalt on the corrosion behaviour of high carbon steels in dependence of heat treatment

    Peissl, S., Mori, G., Leitner, H., Ebner, R. & Eglsäer, S., 2006, In: Materials and Corrosion. p. 759-765

    Research output: Contribution to journal › Article › Research › peer-review

  253. Published

    Influence of Cold Deformation on Stress Corrosion Cracking Resistance of Highly Alloyed Austenitic Stainless Steels in Chloride Media

    Bauernfeind, D., Haberl, J., Mori, G. & Falk, H., 2006, Proceedings of the Corrosion 2006. Omnipress, p. 1-17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  254. Published

    Schwingungsrisskorrosion an hochfesten Austeniten

    Sonnleitner, R. & Mori, G., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  255. 2005
  256. Published

    Influence of refractory metal carbid addition on corrosion properties of cemented carbides

    Sutthiruangwong, S. & Mori, G., 2005, In: Materials and manufacturing processes. 20, p. 47-56

    Research output: Contribution to journal › Article › Research › peer-review

  257. Published

    Intergranular stress corrosion cracking of copper in nitrite solutions

    Mori, G., Scherer, D., Schwentenwein, S. & Warbichler, P., 2005, In: Corrosion science. 47, p. 2099-2124

    Research output: Contribution to journal › Article › Research › peer-review

  258. Published

    Passivity and pseudopassivity of cemented carbides

    Sutthiruangwong, S., Mori, G. & Koesters, R., 2005, In: International journal of refractory metals & hard materials. 23, p. 129-136

    Research output: Contribution to journal › Article › Research › peer-review

  259. 2004
  260. Published

    Characterization of Tribo-Layers on Self-Lubricating PACVD TiN Coatings

    Badisch, E., Mitterer, C., Mayerhofer, P. H., Mori, G., Bakker, R., Brenner, J. & Störi, H., 2004, In: Thin solid films. 460, p. 125-132

    Research output: Contribution to journal › Article › Research › peer-review

  261. Published

    Interactions of different types of localized corrosion in surgical implants

    Mori, G. & Dösinger, H., 2004, In: Journal of materials science / Materials in medicine. p. 249-254

    Research output: Contribution to journal › Article › Research › peer-review

  262. Published

    Material Aspects for Gas Condensing Boilers

    Mori, G. & Zitter, H., 2004, Proceedings of the International Symposium on Advanced Fossile Fuel Technologies for Reaching Goals of Kyoto Protocol. p. 40-46

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  263. Published

    Material Requirements for Heat Exchangers in Oil Condensing Boilers

    Mori, G. & Zitter, H., 2004, Material Requirements for Heat Exchangers in Oil Condensing Boilers. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  264. Published

    Metallurgical and Surface Influence on Corrosion Resistance of Ni-Cr-Mo Alloys According to ASTM G28

    Mori, G. & Sutthiruangwong, S., 2004, In: Corrosion. p. 1082-1091

    Research output: Contribution to journal › Article › Research › peer-review

  265. Published

    MIC by Manganese Oxidizers in a Papermill

    Linhardt, P. & Mori, G., 2004, Corrosion 2004. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  266. Published

    Oxidation of nickel base alloys strengthened by different hardening effects

    Mori, G., 2004, In: Corrosion engineering, science and technology. p. 236-244

    Research output: Contribution to journal › Article › Research › peer-review

  267. Published

    Pitting and crevice corrosion of superaustenitic stainless steels - Loch- und Spaltkorrosion superaustenitischer Stähle

    Mori, G. & Bauernfeind, D., 2004, In: Materials and Corrosion. 55, p. 164-173

    Research output: Contribution to journal › Article › Research › peer-review

  268. Published

    The Role of Binder on Corrosion Properties of Cemented Carbides

    Mori, G., 2004, Proceedings of the PM2004. European Powder Metallurgy Association, p. 581-588

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  269. Published

    User's View of Pitting Corrosion

    Mori, G., 2004, Corrosion 2004. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  270. 2003
  271. Published

    Corrosion of Superaustenitic Stainless Steels in Chloride and Sulfate Containing Media - Influence of Alloying Elements Cr, Mo, N and Cu

    Bauernfeind, D. & Mori, G., 2003, Corrosion 2003. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  272. Published

    Corrosion properties of Co-based cemented carbides in acidic solutions

    Sutthiruangwong, S. & Mori, G., 2003, In: International journal of refractory metals & hard materials. p. 135-145

    Research output: Contribution to journal › Article › Research › peer-review

  273. Published

    Örtliche Korrosion hochbeständiger Werkstoffe

    Mori, G. K., 2003

    Research output: Thesis › Habilitation thesis › peer-review

  274. Published

    Requirements for Initiation of Intergranular SCC in DHP-Copper Tubes

    Mori, G., 2003, Corrosion 2003. p. 1-17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  275. 2002
  276. Published

    On the electrocrystallization of refractory metals in a melt of NaCl-KCl-NaF-MeClx

    Mori, G., Brecka, G., Wittner, T. & Paschen, P., 3 Dec 2002, In: High temperature material processes. 6, 1, p. 109-125 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  277. Published

    Current density limitation and diffusion boundary layer calculation using CFD method

    Filzwieser, A., Hein, K. & Mori, G., Apr 2002, In: JOM. 54, 4, p. 28-31 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  278. Published

    Chloride induced stress corrosion cracking and pitting corrosion of a stainless steel X2CrNiMo18-14-3 heat exchanger of a pulp plant

    Mori, G., Zitter, H. & Maurer, K. L., 1 Jan 2002, International Corrosion Conference series / National Association of Corrosion Engineers: Corrosion 2002. Vol. 2002-April. (NACE - International Corrosion Conference Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  279. Published

    On the influence of hydrogen content and stress level on hydrogen embrittlement of bainitic carbon steel fasteners

    Mori, G., Feyerl, J. & Zitter, H., 1 Jan 2002, International Corrosion Conference series / National Association of Corrosion Engineers. Vol. 2002-April. (NACE - International Corrosion Conference Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  280. Published

    Stress corrosion cracking of semi-hard DHP-copper tubes in potassium nitrite solution

    Schwentenwein, S., Mori, G. & Zitter, H., 1 Jan 2002, International Corrosion Conference series / National Association of Corrosion Engineers: Corrosion 2002. Vol. 2002-April. (NACE - International Corrosion Conference Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  281. Published

    Evaluation of CPT values determined by ASTM G48 practice. Report on round robin tests of the Corrosion Committee of the Austrian Society of Metallurgy

    Wieser, H., Zitter, H. & Mori, G., 2002, In: Materials and Corrosion. p. 37-43

    Research output: Contribution to journal › Article › Research › peer-review

  282. Published

    On the electrocrystallization of refractory metals in a melt of NaCl-KCI-NaF-MeClx

    Mori, G., Brecka, G., Wittner, T. & Paschen, P., 2002, In: High temperature material processes. p. 109-125

    Research output: Contribution to journal › Article › Research › peer-review

  283. Published

    Wirkungsweise von lotwerkstoffen beim M-effekt

    Etschmaier, A., Mori, G., Wegscheider, W. & Wieser, H., 2002, In: Materialwissenschaft und Werkstofftechnik. 33, 2, p. 90-98 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  284. 1995
  285. Published

    Electrolysis of niobium in molten NaCl-KCI-NaF-NbCl5

    Mori, G., Brecka, G. & Paschen, P., 1995, Light Metals 1995: 124th TMS Annual Meeting, Las Vegas, February 12 - 16, 1995 . p. 1331-1335

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  286. 1994
  287. Published

    Energy consumption in tungsten extractive metallurgy

    Mori, G. & Paschen, P., 1994, In: Rare metals : a chinese journal of science, technology & applications in the field of rare metals = Xiyou-jinshu (Yingwen ban). p. 170-178

    Research output: Contribution to journal › Article › Research › peer-review

  288. 1992
  289. Published

    Stromausbeute in der Zinkelektrolyse

    Mori, G. & Paschen, P., 1992, In: Berg- und hüttenmännische Monatshefte : BHM. 137, p. 19-26

    Research output: Contribution to journal › Article › Research › peer-review

  290. 1991
  291. Published

    Energieverbrauch in der Kupfermetallurgie - Teil II. Direktreduktionsverfahren

    Mori, G. & Paschen, P., 1991, In: Berg- und hüttenmännische Monatshefte : BHM. 136, p. 99-104

    Research output: Contribution to journal › Article › Research › peer-review

  292. Published

    Energieverbrauch in der Kupfermetallurgie - Teil III: Hydrometallurgie

    Mori, G. & Paschen, P., 1991, In: Berg- und hüttenmännische Monatshefte : BHM. 136, p. 180-183

    Research output: Contribution to journal › Article › Research › peer-review

  293. Published

    Energieverbrauch in der Kupfermetallurgie - Teil I: Pyrometallurgie (klassisch)

    Mori, G. & Paschen, P., 1991, In: Berg- und hüttenmännische Monatshefte : BHM. 136, p. 18-23

    Research output: Contribution to journal › Article › Research › peer-review

  294. Published

    Productivity increase and energy conservation in copper elektrowinning

    Paschen, P., Langfellner, M. & Mori, G., 1991, Proceedings of the Copper 91 Int. Symposium. p. 575-591

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

View graph of relations

Contact

Phone: 1250

Latest Research Output

View more (267)