Gerhard Dehm

(Former)

1 - 50 out of 175Page size: 50

Research output

  1. 2019

  2. Au–Sn solders applied in transient liquid phase bonding: Microstructure and mechanical behavior

    Du, C., Soeler, R., Völker, B., Matoy, K., Zechner, J., Langer, G., Reisinger, M., Todt, J., Kirchlechner, C. & Dehm, G., 1 Dec 2019, In: Materialia. 8.2019, 100503.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2015
  4. Published

    Interface fracture and chemistry of a tungsten-based metallization on borophosphosilicate glass

    Völker, B., Heinz, W., Matoy, K., Roth, R., Batke, J. M., Schöberl, T., Scheu, C. & Dehm, G., 23 Jun 2015, In: Philosophical magazine. 95, 16-18, p. 1967-1981 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    In Situ TEM Microcompression of Single and Bicrystalline Samples: Insights and Limitations

    Imrich, P. J., Kirchlechner, C., Kiener, D. & Dehm, G., 19 May 2015, In: JOM. 67, 8, p. 1704 1712 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Internal and external stresses: In situ TEM compression of Cu bicrystals containing a twin boundary

    Imrich, P. J., Kirchlechner, C., Kiener, D. & Dehm, G., 15 Apr 2015, In: Scripta materialia. 100, p. 94-97 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Cyclic bending experiments on free-standing Cu micron lines observed by electron backscatter diffraction

    Wimmer, A. C., Heinz, W., Detzel, T., Robl, W., Nellessen, M., Kirchlechner, C. & Dehm, G., 2015, In: Acta materialia. 83, p. 460-469

    Research output: Contribution to journal › Article › Research › peer-review

  8. 2014
  9. Published

    Auf Biegen und Brechen – Mikromechanik an miniaturisierten Materialien

    Kirchlechner, C. & Dehm, G., 2014, Max-Planck-Jahrbuch 2014. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  10. Published

    Differences in deformation behavior of bicrystalline Cu micropillars containing a twin boundary or a large-angle grain boundary

    Imrich, P., Kirchlechner, C., Motz, C. & Dehm, G., 2014, In: Acta materialia. 73, p. 240-250

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Intermetallic phase selection during homogenisation for AA6082 alloy

    Li, J., Wimmer, A. C., Dehm, G. & Schumacher, P., 2014, In: Philosophical magazine. p. 830-846

    Research output: Contribution to journal › Article › Research › peer-review

  12. 2013
  13. Published

    Diffusive and massive phase transformations in Ti-Al-Nb alloys - Modelling and experiments

    Gamsjäger, E., Liu, Y., Rester, M., Puschnig, P., Draxl, C., Clemens, H., Dehm, G. & Fischer, F. D., 2013, In: Intermetallics. 38, p. 126-138

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Elastoplastic Buckling as Source of Misinterpretation of Micropillar-Tests

    Daum, B., Dehm, G., Clemens, H., Rester, M., Fischer, F. D. & Rammerstorfer, F. G., 2013, In: Acta materialia. 61, p. 4996-5007

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Insights into the atomic and electronic structure triggered by ordered nitrogen vacancies in CrN

    Zhang, Z., Li, H., Daniel, R., Mitterer, C. & Dehm, G., 2013, In: Physical review : B, Condensed matter and materials physics. 87, p. 0141041-0141049

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Transmission electron microscopy characterization of CrN films on MgO(001)

    Harzer, T. P., Daniel, R., Mitterer, C., Dehm, G. & Zhang, Z. L., 2013, In: Thin solid films. 545, p. 154-160 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. 2012
  18. Published

    Advanced nanomechanics in the TEM: effects of thermal annealing on FIB prepared Cu samples

    Kiener, D., Zhang, Z., Sturm, S., Cazottes, S., Imrich, P. J., Kirchlechner, C. & Dehm, G., 2012, In: Philosophical magazine. 92, p. 3269-3289

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Expected and unexpected plastic behavior at the micron scale: An in situ μLaue tensile study

    Kirchlechner, C., Imrich, P., Grosinger, W., Kapp, M., Keckes, J., Micha, J.-S., Ulrich, O., Thomas, O., Labat, S., Motz, C. & Dehm, G., 2012, In: Acta materialia. 60, p. 1252-1258

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Influence of impurity elements on the nucleation and growth of Si in high purity melt-spun Al–Si-based alloys

    Li, J., Zarif, M. Z., Dehm, G. & Schumacher, P., 2012, In: Philosophical magazine. 92, p. 3789-3805

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    In-situ Electron Microscopy,

    Dehm, G., 2012

    Research output: Book/Report › Book › Research

  22. Published

    In-situ fracture study of thin Cu films on polyimide substrate

    Marx, V. M., Kirchlechner, C., Zizak, I., Dehm, G. & Cordill, M. J., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  23. Published

    In Situ Study of Gamma-TiAl Lamellae Formation in Supersaturated alpha 2-Ti3Al Grains

    Cha, L., Schmölzer, T., Zhang, Z., Mayer, S., Clemens, H., Staron, P. & Dehm, G., 2012, In: Advanced engineering materials. 14, p. 299-303

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    In-situ TEM Straining Experiments: Recent Progress in Stages and Small-Scale Mechanics

    Dehm, G., Legros, M. & Kiener, D., 2012, In-situ Electron Microscopy. p. 227-254

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  25. Published

    Investigation of reversible plasticity in a micron-sized, single crystalline copper bending beam by X-ray µLaue diffraction

    Kirchlechner, C., Grosinger, W., Kapp, M. W., Imrich, P. J., Micha, J.-S., Ulrich, O., Keckes, J., Dehm, G. & Motz, C., 2012, In: Philosophical magazine. p. 3231-3242

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Microstructure evolution and grain refinement processes in the intermetallic TiAl-Mo alloy system

    Rashkova, B., Sailer, C., Clemens, H., Schöberl, T., Spiradek-Hahn, K., Brabetz, M., Dehm, G. & Mayer, S., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    Novel temperature dependent tensile test of freestanding copper thin film structures

    Smolka, M., Motz, C., Detzel, T., Robl, W., Grießer, T., Wimmer, A. C. & Dehm, G., 2012, In: Review of scientific instruments. Jun;(6), p. 064702/1-064702/9

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Quantitative Approaches for in situ SEM and TEM Deformation Studies

    Dehm, G., Kiener, D., Motz, C., Pippan, R. & Smolka, M., 2012, In: Microscopy and microanalysis. 18, p. 736-737

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Sample Preparation by Metallography and Focused Ion Beam for Nanomechanical Testing

    Moser, G., Felber, H., Rashkova, B., Imrich, P. J., Kirchlechner, C., Grosinger, W., Motz, C., Dehm, G. & Kiener, D., 2012, In: Practical metallography = Praktische Metallographie. 49, p. 343-355

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    TEM characterization of CrN thin films epitaxially grown on MgO (001)

    Harzer, T. P., Kormout, K., Daniel, R., Mitterer, C., Dehm, G. & Zhang, Z. L., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. 2011
  32. Published

    Advanced characterisation of the Cu-MgO interface structure by Cs-corrected high-resolution transmission electron microscopy

    Zhang, Z., Daniel, R., Dehm, G. & Mitterer, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    A Mechanical Method for Preparing TEM Samples from Brittle Films on Compliant Substrates

    Taylor, A. A., Cordill, M., Moser, G. & Dehm, G., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 408-413

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Deformation behavior of miniaturized copper bicrystals and corresponding dislocation boundary reactions

    Imrich, P. J., Kirchlechner, C., An, X., Zhang, Z. & Dehm, G., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  35. Published

    Deformation Mechanisms in Micron-Sized PST-TiAl Compression Samples: Experiment and Model

    Rester, M., Fischer, F. D., Kirchlechner, C., Schmölzer, T., Clemens, H. & Dehm, G., 2011, In: Acta materialia. 59, p. 3410-3421

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Dislocation plasticity of Al film on polyimide investigated by cross-sectional in situ transmission electron microscopy straining

    Oh, S. H., Rentenberger, C., Im, J., Motz, C., Kiener, D., Karnthaler, H.-P. & Dehm, G., 2011, In: Scripta materialia. 65, p. 456-459

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Dislocation storage in single slip oriented Cu micro-tensile samples: New insights by X-ray microdiffraction

    Kirchlechner, C., Kiener, D., Motz, C., Labat, S., Vaxelaire, N., Perroud, O., Micha, J.-S., Ulrich, O., Thomas, O., Dehm, G. & Keckes, J., 2011, In: Philosophical magazine. 91, p. 1256-1264

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Electrical properties and structure of grain boundaries in n-conducting BaTiO3 ceramics

    Hou, J., Zhang, Z., Preis, W., Sitte, W. & Dehm, G., 2011, In: Journal of the European Ceramic Society. p. 763-771

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Examples of scanning transmission electron microscopy for microstructural characterization of alloys

    Rashkova, B., Thomas, J., Moser, G., Rester, M. & Dehm, G., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  40. Published

    Impact of instrumental constraints and imperfections on the dislocation structure in micron-sized Cu compression pillars

    Kirchlechner, C., Keckes, J., Motz, C., Grosinger, W., Kapp, M. W., Micha, J.-S., Ulrich, O. & Dehm, G., 2011, In: Acta materialia. 59, p. 5618-5626

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    In-situ TEM heating study of the y lamellae formation inside the alpha2 matrix of a Ti-45Al-7.5Nb alloy

    Cha, L., Clemens, H., Dehm, G. & Zhang, Z., 2011, In: Advanced materials. 146-147, p. 1365-1368

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    In situ µLaue: Instrumental setup for the deformation of micron sized samples

    Kirchlechner, C., Keckes, J., Micha, J.-S. & Dehm, G., 2011, In: Advanced engineering materials. 13, p. 837-844

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Microstructure and adhesion of as-deposited and annealed Cu/Ti films on polyimide

    Cordill, M., Taylor, A., Schalko, J. & Dehm, G., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 729-734

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Microstructure evolution and mechanical properties of an intermetallic Ti-43.5Al-4Nb-1Mo-0.1B alloy after ageing below the eutectoid temperature

    Cha, L., Clemens, H. & Dehm, G., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 703-708

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Physical Metallurgy and Properties of ß-solidifying TiAl Based Alloys

    Clemens, H., Schmölzer, T., Schloffer, M., Schwaighofer, E., Mayer, S. & Dehm, G., 2011, Materials Research Society symposium proceedings Volume 1295. Materials Research Society : MRS, p. 95-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    The effect of film thickness variations in peridic cracking: Analysis and experiments

    Taylor, A. A., Edlmayr, V., Cordill, M. & Dehm, G., 2011, In: Surface & coatings technology. 206, p. 1830-1836

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    The effect of temperature and strain rate on the periodic cracking of amorphous AlxOy films on Cu

    Taylor, A. A., Edlmayr, V., Cordill, M. & Dehm, G., 2011, In: Surface & coatings technology. 206, p. 1855-1859

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Work hardening in micropillar compression: In situ experiments and modeling

    Kiener, D., Guruprasad, P. J., Keralavarma, S. M., Dehm, G. & Benzerga, A. A., 2011, In: Acta materialia. 59, p. 3825-3840

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    µLaue: Compression studies on miniaturised Copper single crystals

    Kirchlechner, C., Kapp, M., Motz, C., Grosinger, W., Keckes, J., Micha, J.-S., Ulrich, O. & Dehm, G., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. 2010
  51. Published

    Adhesion Energies of Cr Thin Films on Polyimide Determined from Buckling: Experiment and Model

    Cordill, M., Fischer, F. D., Rammerstorfer, F. G. & Dehm, G., 2010, In: Acta materialia. 58, p. 5520-5531

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Atomic Structure Characterization of Cu/MgO(001) Interfaces by CS-Corrected HRTEM

    Cazottes, S., Zhang, Z. L., Daniel, R., Gall, D. G. & Dehm, G., 2010, Proceedings 37th International Conference on Metallurgical Coatings and Thin Films. p. 14-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Can local hot spots induce alpha2/gamma lamellae during incomplete massive transformation of gamma-TiAl alloys?

    Fischer, F. D., Cha, L., Dehm, G. & Clemens, H., 2010, In: Intermetallics. 18, p. 972-976

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Cyclic loading behavior of micro-sized polycrystalline copper wires

    Yang, B., Motz, C., Grosinger, W. & Dehm, G., 2010, In: Procedia Engineering. 2, p. 925-930

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Fracture and Delamination of Chromium Thin Films on Polymer Substrates

    Cordill, M., Taylor, A., Schalko, J. & Dehm, G., 2010, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . p. 870-875

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    In situ TEM study of Bauschinger Effect in Freestanding Nanocrystalline Gold Films

    Rajagoplan, J., Rentenberger, C., Karnthaler, H. P. & Dehm, G., 2010, In: Acta materialia. 58, p. 4772-4782

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    In situ μLaue tensile tests on micron sized Cu single crystals

    Kirchlechner, C., Imrich, P., Grosinger, W., Kapp, M., Motz, C., Keckes, J. & Dehm, G., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1 2 3 4 Next
View graph of relations

Latest Research Output

View more (175)