Christina Scheu

(Former)

1 - 79 out of 79Page size: 100

Research output

  1. 2015
  2. Published

    Interface fracture and chemistry of a tungsten-based metallization on borophosphosilicate glass

    Völker, B., Heinz, W., Matoy, K., Roth, R., Batke, J. M., Schöberl, T., Scheu, C. & Dehm, G., 23 Jun 2015, In: Philosophical magazine. 95, 16-18, p. 1967-1981 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2011
  4. Published

    Effects of thermal annealing on the microstructure of sputtered Al 2O3 coatings

    Edlmayr, V., Harzer, T. P., Hoffmann, R., Kiener, D., Scheu, C. & Mitterer, C., Jul 2011, In: Journal of vacuum science & technology / A (JVST). 29, 4, 041506.

    Research output: Contribution to journal › Article › Research › peer-review

  5. 2010
  6. Published

    Influence of Yttrium on the Thermal Stability of Ti-Al-N Thin Films

    Moser, M., Kiener, D., Scheu, C. & Mayrhofer, P. H., 2010, In: Materials. 3, p. 1573-1592

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Perylene-Labeled Silica Nanoparticles: Synthesis and Characterization of Three Novel Silica Nanoparticle Species for Live-Cell Imaging

    Blechinger, J., Herrmann, R., Kiener, D., Garcia-Garcia, F. J., Scheu, C., Reller, A. & Bräuchle, C., 2010, In: Small. 6, p. 2427-2435

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Short-term Creep Behavior of an X 37 Cr Mo V 5-1 Hot-work Tool Steel with almost Bainitic and fully Martensitic Microstructures

    Wurmbauer, H., Leitner, H., Panzenböck, M., Scheu, C. & Clemens, H., 2010, In: Steel research international. p. 569-575

    Research output: Contribution to journal › Article › Research › peer-review

  9. 2009
  10. Published

    Changes in Tempering and its Effect on Precipitation Behaviour in a Hot-work Tool Steel

    Mayer, S., Leitner, H., Scheu, C., Siller, I. & Clemens, H., 2009, In: Steel research international. 80, p. 89-95

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Correlation between heat treatment, microstructure and mechanical properties of a hot-work tool steel

    Mayer, S., Scheu, C., Leitner, H., Siller, I. & Clemens, H., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 86-91

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Effect of Y addition and thermal treatment on the stability of PVD deposited TiAlN coatings

    Kiener, D., Holec, D., Moser, M., Rachbauer, R., Mayrhofer, P. H. & Scheu, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    High carbon solubility in a y-TiAl-based Ti-45Al-5Nb-0.5C alloy and its effect on hardening

    Scheu, C., Stergar, E., Schober, M., Cha, L., Clemens, H., Bartels, C., Schimansky, F.-P. & Cerezo, A., 2009, In: Acta materialia. 57, p. 1504-1511

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Initial Stages of Lamellae Formation in High Nb Containing gamma-TiAl Based Alloys

    Cha, L., Scheu, C., Dehm, G., Schnitzer, R. & Clemens, H., 2009, Initial Stages of Lamellae Formation in High Nb Containing gamma-TiAl Based Alloys. Materials Research Society : MRS, p. 153-158

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Short-term creep behavior of a Cr Mo V hot-work tool steel

    Wurmbauer, H., Leitner, H., Panzenböck, M., Scheu, C. & Clemens, H., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 1066-1073

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Synthesis and Biological Evaluation of a Bioresponsive and Endosomolytic siRNA-Polymer Conjugate

    Meyer, M., Dohmen, C., Phillipp, A., Kiener, D., Maiwald, G., Scheu, C., Ogris, M. & Wagner, E., 2009, In: Molecular Pharmaceutics. 6, p. 752-762

    Research output: Contribution to journal › Article › Research › peer-review

  17. 2008
  18. Published

    Interface structure of epitaxial (111) VN films on (111) MgO substrates

    Lazar, P., Rashkova, B., Redinger, J., Podloucky, R., Mitterer, C., Scheu, C. & Dehm, G., 2008, In: Thin solid films. 517, p. 1177-1181

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Kurzzeitkriechverhalten eines Warmarbeitsstahls

    Wurmbauer, H., Scheu, C., Panzenböck, M., Stergar, E., Leitner, H., Clemens, H. & Caliskanoglu, Z. D., 2008, Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung. p. 251-256

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Microstructure and Mechanical Properties of Ti-45Al-5Nb + (0 - 0.5C) Sheets

    Gerling, R., Schimansky, F. P., Stark, A., BARTELS, A., Kestler, H., Cha, L., Scheu, C. & Clemens, H., 2008, In: Intermetallics. 16, p. 689-697

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Microstructure and Properties of Engineering Materials

    Clemens, H. & Scheu, C., 2008, Neutrons and Synchrotron Radiation in Engineering Materials Science from Fundamentals to Material and Component Characterization. p. 3-20

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  22. Published

    Nanometer-scaled lamellar microstructures in Ti–45Al–7.5Nb–(0; 0.5)C alloys and their influence on hardness

    Cha, L., Scheu, C., Clemens, H., Chladil, H., Dehm, G., Gerling, R. & BARTELS, A., 2008, In: Intermetallics. 16, p. 868-875

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    N-K electron energy-loss near-edge structures for TiN/VN layers: an ab-initio and experimental study

    Lazar, P., Redinger, J., Strobl, J., Podloucky, R., Rashkova, B., Dehm, G., Kothleitner, G., Sturm, S., Kutschej, K., Mitterer, C. & Scheu, C., 2008, In: Analytical and bioanalytical chemistry. 390, p. 1447-1453

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    On the overaging behaviour of tool steel X38CrMoV5-3

    Bischof, M., Staron, P., Caliskanoglu, Z. D., Leitner, H., Scheu, C. & Clemens, H., 2008, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 472, p. 148-152

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Precipitates in a Fe-Co-Mo alloy characterized by complementary methods

    Eidenberger, E., Stergar, E., Leitner, H., Scheu, C., Staron, P. & Clemens, H., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 247-252

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Zum Kurzzeitkriechverhalten von Warmarbeitsstählen

    Stergar, E., Panzenböck, M., Leitner, H., Wurmbauer, H., Scheu, C. & Clemens, H., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. p. 342-346

    Research output: Contribution to journal › Article › Research › peer-review

  27. 2007
  28. Published

    A Comparison of the Electronic Structure of N-K in TiN and VN using EELS and ab-initio Calculations

    Rashkova, B., Kothleitner, G., Sturm, S., Scheu, C., Kutschej, K., Mitterer, C., Lazar, P., Redinger, J., Podloucky, R. & Dehm, G., 2007, Microscopy and Microanalysis. p. 414-415

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Characteristics of an Optimised Active Metal Cast Joint between Copper and C/C

    Schedler, B., Huber, T., Friedrich, T., Eidenberger, E., Kapp, M., Scheu, C., Pippan, R. & Clemens, H., 2007, In: Physica scripta. T128, p. 200-2003

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Combination of ab-initio and N-K, Ti-L2,3, V-L2,3 electron energy-loss near edge structure studies for TiN and VN films

    Rashkova, B., Lazar, P., Redinger, J., Podloucky, R., Kothleitner, G., Sturm, S., Kutschej, K., Mitterer, C., Scheu, C. & Dehm, G., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 98, p. 1060-1065

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Control of bonding and epitaxy at copper/sapphire interface

    Oh, S. H., Scheu, C., Wagner, T. & Rühle, M., 2007, In: Applied physics letters. 91, p. 141912-1-141912-3

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Examination of C/C flat tile mock-ups with hypervapotron cooling after high heat flux testing

    Schedler, B., Friedrich, T., Traxler, H., Eidenberger, E., Scheu, C., Clemens, H., Pippan, R. & Escourbiac, F., 2007, In: Fusion engineering and design. 82, p. 299-305

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    First observation of a hexagonal close packed metastable intermetallic phase between Cu and Al bilayer films

    Cha, L., Scheu, C., Richter, G., Wagner, T., Sturm, S. & Rühle, M., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 98, p. 692-699

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Formation and modulation of an ultrafine lamellar structure in high Nb containing TiAl alloys

    Cha, L., Scheu, C., Chladil, H., Bartels, A., Gerling, R. & Clemens, H., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  35. Published

    Gefügecharakterisierung eines Warmarbeitsstahls mit martensitisch-bainitschem Mischgefüge

    Mayer, S., Pölzl, S., Hawranek, G., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2007, In: Practical metallography = Praktische Metallographie. p. 182-192

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Herstellung lamellarer Gefügetypen in intermetallischen TiAl-Legierungen und deren Charakterisierung

    Schnitzer, R., Chladil, H., Scheu, C., Clemens, H., Bystrzanowski, S., Bartels, A. & Kremmer, S., 2007, In: Practical metallography = Praktische Metallographie. 44, p. 430-443

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Influence of the Cooling Rate on the Mechanical Properties of a Hot-work Tool Steel

    Mayer, S., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2007, In: Berg- und hüttenmännische Monatshefte : BHM. 152, p. 132-136

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Methods to Determine the Joint Strength of C/C to Copper Joints

    Schedler, B., Huber, T., Eidenberger, E., Scheu, C., Pippan, R. & Clemens, H., 2007, In: Fusion engineering and design. 82, p. 1786-1792

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Mikrostruktur einer C/C-CU Verbindung für Erste-Wand-Komponenten des ITER

    Eidenberger, E., Scheu, C., Hawranek, G., Leitner, H., Clemens, H., Pippan, R. & Schedler, B., 2007, In: Practical metallography = Praktische Metallographie. 44, p. 403-412

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Nanocomposite CrC/a-C:H coatings for automative applications

    Mitterer, C., Gassner, G., Scheu, C., Lechtahler, M., Mayrhofer, P. H. & Daniel, R., 2007, 34 th International Conference on Metallurgical Coatings and Thin Films. p. 113-113

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Nonreactive Spreading at High Temperature: Molten Metals and Oxides on Molybdenum

    Saiz, E., Tomsia, A. P., Rauch, M., Scheu, C., Rühle, M., Benhassine, M., Seveno, D., Coninck, J. D. & Lopez-Esteban, S., 2007, In: Physical review : E, Statistical, nonlinear and soft matter physics. p. 041602-1-041602-15

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    SANS Characterisation of nm-sized Precipitates in a Martensitic Fe-Co-Mo Alloy

    Eidenberger, E., Schober, M., Staron, P., Caliskanoglu, D., Leitner, H., Scheu, C. & Clemens, H., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Spin-misalignment scattering in a precipitation-hardened steel

    Eidenberger, E., Bischof, M., Staron, P., Leitner, H., Michels, A., Granitzer, P., Rumpf, K., Scheu, C. & Clemens, H., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    Structure Models of Massively Transformed High Niobium Containing TiAl Alloys

    Scheu, C., Cha, L., Sturm, S., Chladil, H., Mayrhofer, P. H., Clemens, H., Wolf, W. & Podloucky, R., 2007, MRS Fall Meeting. Materials Research Society : MRS, p. II05-01-II05-06

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Synthesis of ab-initio and N-K, Ti-L2,3, V-L2,3 electron energy-loss near edge structure studie for TiN and VN films

    Rashkova, B., Lazar, P., Redinger, J., Podloucky, R., Kothleitner, G., Sturm, S., Kutschej, K., Mitterer, C., Scheu, C. & Dehm, G., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 98, p. 1060-1065

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    The Influence of Spin-misalignment Scattering on the SANS Data Evolution of Martensitic Age-hardening Steels

    Bischof, M., Staron, P., Michels, A., Granitzer, P., Rumpf, K., Leitner, H., Scheu, C. & Clemens, H., 2007, In: Acta materialia. 55, p. 2637-2646

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Tribological properties of nanocomposite CrCx/a-C:H thin films

    Gassner, G., Patscheider, J., Mayrhofer, P. H., Sturm, S., Scheu, C. & Mitterer, C., 2007, In: Tribology Letters. 27, p. 97-104

    Research output: Contribution to journal › Article › Research › peer-review

  48. 2006
  49. Published

    Bonding at copper–alumina interfaces established by different surface treatments: a critical review

    Scheu, C., Gao, M., Oh, S. H., Dehm, G., Klein, S., Tomsia, A. P. & Rühle, M., 2006, In: Journal of materials science. 41, p. 5161-5168

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Characteristics of an optimised active metal cast joint between C/C and copper

    Schedler, B., Huber, T., Friedrich, T., Eidenberger, E., Kapp, M., Scheu, C., Pippan, R. & Clemens, H., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    Characterization of the Precipitates in Modern Boron Containing 9-12 % Cr Steels by EFTEM and their Correlation to the Creep Strength

    Kauffmann, F., Mayer, K.-H., Straub, S., Zies, G., Scheu, C., Ruoff, H. & Maile, K., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 273-280

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Charakterisierung der auftretenden Phasen an C/C-Cu Verbindungen - Endbericht

    Scheu, C., Eidenberger, E., Leitner, H. & Clemens, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  53. Published

    Copper Nanowires within the Central Channel of Tobacco Mosaic Virus Particles

    Balci, S., Bittner, A. M., Hahn, K., Scheu, C., Knez, M., Kadri, A., Wege, C., Jeske, H. & Kern, K., 2006, In: Electrochimica acta. 51, p. 6251-6257

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Epitaxy and Bonding of Cu Films on Oxygen-Terminated a-Al2O3 (0001) Surfaces

    Oh, S. H., Scheu, C., Wagner, T., Tchernychova, E. & Rühle, M., 2006, In: Acta materialia. 54, p. 2685-2696

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Gefügecharakterisierung eines Warmarbeitsstahls mit martensitisch-bainitischem Mischgefüge

    Mayer, S., Pölzl, S., Hawranek, G., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 379-385

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Gefügefeinung einer neuen, hoch niobhaltigen TiAl-Legierung durch Massivtransformation und Wärmebehandlung - Endbericht

    Scheu, C., Schnitzer, R., Chladil, H. & Clemens, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  57. Published

    Interface structure and strain development during compression tests of Al2O3/Nb/Al2O3 sandwiches

    Scheu, C., Liu, Y., Oh, S. H., Brunner, D. & Rühle, M., 2006, In: Journal of materials science. 41, p. 7798-7807

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Intermetallics for Higher, Moderate and Low Temperature Applications (HIMOLO) - Experimental characterisation: preliminary results (f) Grain-size determination and grain orientation measurements using EBSD in a SEM

    Scheu, C., Chladil, H., Clemens, H. & Ebner, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  59. Published

    Intermetallics for Higher, Moderate and Low Temperature Applications (HIMOLO) - Specification of the heat treatment process to abtain massively transformed microstructures and first test

    Scheu, C., Chladil, H., Clemens, H. & Ebner, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  60. Published

    Intermetallics for Higher, Moderate and Low Temperature Applications - Microstructures and properties characterization

    Scheu, C., Clemens, H. & Schaden, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  61. Published

    Intermetallics for Higher, Moderate and Low Temperature Applications - Processing routes

    Scheu, C., Clemens, H. & Schaden, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  62. Published

    Kurzzeitkriechverhalten von Warmarbeitsstählen

    Wurmbauer, H. & Scheu, C., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  63. Published

    Mechanical Size-effects in Miniaturized and Bulk Materials

    Dehm, G., Motz, C., Scheu, C., Clemens, H., Mayrhofer, P. H. & Mitterer, C., 2006, In: Advanced engineering materials. 8, p. 1033-1045

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Metallographische Präparation von dotiertem Tantal für licht- und rasterelektronenmikroskopische Mikrostrukturuntersuchungen

    Mayer, S., Pölzl, S., Hawranek, G., Bischof, M., Scheu, C., Clemens, H. & Knabl, W., 2006, In: Practical metallography = Praktische Metallographie. 43, p. 614-628

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Microstructural characterization of modern Boron containing 9-11%Cr steels developed in the framework of the COST program

    Kauffmann, F., Mayer, K.-H., Straub, S., Zies, G., Scheu, C., Willer, D., Ruoff, H. & Maile, K., 2006, Proceeding of the 8th Liége Conference. p. 1171-1180

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Microstructural evolution of Cr-Mn-N Austenitic Steels during Cold Work Hardening

    Saller, G., Spiradek-Hahn, K., Scheu, C. & Clemens, H., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 427, p. 246-254

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Microstructure and Mechanical Properties of a C/C-Copper Joint Developed for Plasma Facing Components

    Eidenberger, E., Scheu, C., Hawranek, G., Pippan, R., Schedler, B., Leitner, H. & Clemens, H., 2006, In: Advanced engineering materials. 8, p. 1092-1096

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Mikrostruktur einer C/C-Cu Verbindung für Erste Wand Komponenten des Iter

    Eidenberger, E., Scheu, C., Hawranek, G., Pippan, R., Schedler, B., Leitner, H. & Clemens, H., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 525-530

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Mikrostrukturelle Merkmale von martensitischen Chromstählen und deren Einfluss auf die Kriechfestigkeit

    Maile, K., Zies, G., Scheck, R., Kuppler, D., Ruoff, H., Rauch, M., Klenk, A. & Scheu, C., 2006, In: Practical metallography = Praktische Metallographie. 43, p. 349-363

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Neutronenkleinwinkelstreuung an ausscheidungsgehärteten Stählen

    Eidenberger, E., Bischof, M., Staron, P., Erlach, S. D., Leitner, H., Scheu, C. & Clemens, H., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  71. Published

    Recrystallisation and Phase Transitions in a g-TiAl Based Alloy as Observed by ex- and in-situ High-energy X-ray Diffraction

    Liss, K.-D., Bartels, A., Clemens, H., Bystrzanowski, S., Stark, A., Buslaps, T., Schimansky, F.-P., Gerling, R., Scheu, C. & Schreyer, A., 2006, In: Acta materialia. 54, p. 3721-3735

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Structure Models of Massively Transformed High Niobium Containing TiAl

    Scheu, C., Cha, L., Sturm, S., Chladil, H., Mayrhofer, P. H., Clemens, H., Bartels, A., Wolf, W. & Podloucky, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  73. Published

    Structure of sputtered nanocomposite CrCx/a-C:H thin films

    Gassner, G., Patscheider, J., Mayrhofer, P. H., Hegedus, E., Toth, L., Kovacs, I., Pecz, B., Srot, V., Scheu, C. & Mitterer, C., 2006, In: Journal of vacuum science & technology / B (JVST). 24, p. 1837-1843

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    TEM Investigations of the Structural Evolution in a Pearlitic Steel Deformed by High-Pressure Torsion

    Wetscher, F., Pippan, R., Sturm, S., Kauffmann, F., Scheu, C. & Dehm, G., 2006, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 37, p. 1963-1968

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Unterschiedliche lamellare Gefügetypen in intermetallischen TiAl-Legierungen

    Schnitzer, R., Chladil, H., Scheu, C., Clemens, H., Bystrzanowski, S., Bartels, A. & Kremmer, S., 2006, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 59-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. 2005
  77. Published

    Analytical TEM Study of Microstructure-Property Relations in Liquid-Phase Sintered SiC with AlN- Y2O3 Additives

    Huang, R., Gu, H., Rixecker, G., Aldinger, F., Scheu, C. & Rühle, M., 2005, In: Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. 96, p. 496-502

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    An intermetallic and metastable phase formation between Cu and Al Films

    Cha, L., Richter, G., Scheu, C., Wagner, T., Sturm, S. & Rühle, M., 2005, 7th multinational Congress on Microscopy. p. 347-348

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    An Intermetallic and Metastable Phase Formation between Cu and Al Films

    Cha, L.-M., Richter, G., Scheu, C., Wagner, T., Sturm, S. & Rühle, M., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  80. Published

    Combining complementary techniques to study precipitates in steels

    Bischof, M. A., Erlach, S., Staron, P., Leitner, H., Scheu, C. & Clemens, H., 2005, In: Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. 96, p. 1074-1080

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Deformation and Fracture Mechanisms of Al2O3/Nb/Al2O3 Composites under Compression

    Zhang, Z. F., Brunner, D., Scheu, C. & Rühle, M., 2005, In: Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. 96, p. 62-70

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    EELS of twin boundaries in natural sphalerite (ZnS)

    Scrot, V., Scheu, C., Sigle, W. & Rühle, M., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  83. Published

    Intergranular Films at Metal-Ceramic Interfaces: Part I – Interface, Structure & Chemistry

    Avishai, A., Scheu, C. & Kaplan, W. D., 2005, In: Acta materialia. 53, p. 1559-1569

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Microstructural evolution of a pearlitic steel during severe plastic deformation

    Wetscher, F., Pippan, R., Sturm, S., Kauffmann, F., Scheu, C. & Dehm, G., 2005, 7th multinational Congress on Microscopy. p. 187-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Ordered Liquid Aluminum at the Interface with Sapphire

    Oh, S. H., Kauffmann, Y., Scheu, C., Kaplan, W. D. & Rühle, M., 2005, In: Science. 310, p. 661-663

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Ordering in the liquid at an Al/Al2O3/Liquid-Solid Interface

    Kauffmann, Y., Oh, S. H., Scheu, C., Kaplan, W. D. & Rühle, M., 2005, 7th multinational Congress on Microscopy. p. 153-154

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    Requirements for Microstructural Investigations of Steels used in Modern Power Plants

    Scheu, C., Kaufmann, F., Zies, G., Maile, K., Straub, S. & Mayer, K.-H., 2005, In: Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. 96, p. 653-659

    Research output: Contribution to journal › Article › Research › peer-review

View graph of relations

Latest Research Output

View more (79)