Christian Bernhard

201 - 290 out of 290Page size: 100

Research output

  1. 2012
  2. Published

    Investigation of Alumina Wetting Fe-Ti, Fe-P and Fe-Ti-P Alloys

    Karasangabo, A. & Bernhard, C., 2012, In: Journal of adhesion science and technology. 26, p. 1141-1156

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Linking up of HT-LSCM and DSC measurements to characterize phase diagrams of steels

    Presoly, P., Pierer, R. & Bernhard, C., 2012, IOP Confernece Series (MCWASP XIII) - Materials Science and Engineering. p. 012064-012065

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Linking up of HT-LSCM and DSC measurements to characterize phase diagrams of steels

    Presoly, P., Pierer, R. & Bernhard, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  5. Published

    Near surface austenite grain growth in different casting processes for steel: Experiments and modeling

    Bernhard, C., Bragin, S. & Vanovsek, W., 2012, ICS 2012. p. Paper-296

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    The importance of solidification structure with respect to hot tearing during continuous casting of steels

    Pierer, R., Rauter, W. & Bernhard, C., 2012, TMS 2012. p. 251-258

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Thermomechanical processing of low-carbon steels on Arvedi endless strip production lines: Modelling and plant results

    Bragin, S., Bernhard, C., Linzer, B., Rimnac, A., Guindani, A. & Venturini, R., 2012, TMP2012 - 4th International Conference on Thermomechanical Processing of Steel. p. Session 9-Paper 1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Welding procedure for high strength welds and their microstructural evolution during solidification and cooling: IIW Doc. II-C-436-11

    Vanovsek, W., Schnitzer, R., Schlagradl, T., Schneider, R., Posch, G., Schider, S., Bernhard, C., Leitner, H., Rauch, R., Fiedler, M. & Stoschka, M., 2012

    Research output: Non-textual form › Web publication/site › Research

  9. 2011
  10. Published

    A Study about the Influence of Carbon Content in the Steel on the Casting Behavior

    Xia, G., Bernhard, C., Ilie, S. & Fürst, C., 7 Jan 2011, In: Steel research international. 82.2011, 3, p. 230-236 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Development, implementation and verification of a transient numeric solidification model of a continuous bloom caster at Voestalpine Stahl Donawitz

    Michelic, S., Bernhard, C., Rauter, W., Erker, M., Brandl, W. & Sormann, A., 2011, 7th European Continuous Casting Conference. p. Paper-02

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Erste Ergebnisse des neuen Hochtemperatur-Konfokalmikroskops am Lehrstuhl für Metallurgie

    Bernhard, C., Schider, S., Sormann, A., Xia, G. & Ilie, S., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. 156, p. 161-167

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Experimental methods to characterise new steel grades by means of thermal analysis

    Presoly, P., Pierer, R. & Bernhard, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    Influence of alloying additions on the morphology of non-metallic inclusions in high-strength steel welds: II-1776-11;II-C-421-11

    Vanovsek, W., Bernhard, C., Fiedler, M. & Posch, G., 2011

    Research output: Non-textual form › Web publication/site › Transfer

  15. Published

    Interactions of non-metallic inclusions with steel and slag: Thermodynamic modeling, experiments and metallographic analyses

    Michelic, S., Hartl, M. & Bernhard, C., 2011, EPD Congress 2011. p. 723-730

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Investigating the influence of Ti and P on the clogging of ULC steels in the continuous casting process

    Bernhard, C., Xia, G., Karasangabo, A., Egger, M. & Pissenberger, A., 2011, 7th European Continuous Casting Conference. p. Paper -17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Measuring mechanical behavior of steel during solidification: Modeling the SSCC test

    Rowan, M., Thomas, B., Pierer, R. & Bernhard, C., 2011, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 42, 4, p. 837-851

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Modification of non-metallic inclusions in the ESR process by steel-slag interaction: Thermodynamic and experimental considerations

    Michelic, S., Tanzer, R., Schützenhöfer, W. & Bernhard, C., 2011, Proceedings of the 2011 International Symposium on Liquid Metal Processing and Casting. p. 81-88

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    On the Representativeness of Automated SEM/EDS Analyses for Inclusion Characterisation with Special Regard to the Measured Sample Area

    Michelic, S., Wieser, G. & Bernhard, C., 2011, In: ISIJ international. 51, p. 769-775

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    The formation of hot tear segregations in the continuous casting process

    Ilie, S., Reisinger, P., Bernhard, C. & Pierer, R., 2011, 3rd Chinese-German Metallurgy Seminar on Fundamentals of Iron and Steelmaking. p. Paper-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Thermodynamic and Experimental Study on the Modification of Nonmetallic Inclusions Through the Contact with CaO-Al2O3-MgO Slags

    Michelic, S., Bernhard, C. & Hartl, M., 2011, AIST Proceedings 2011. p. 617-626

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Thermo-Mechanical Properties of an Fe–Mn–Si–Cr–Ni–VC Shape Memory Alloy with Low Transformation Temperature

    Leinenbach, C., Kramer, H., Bernhard, C. & Eifler, D., 2011, In: Advanced engineering materials.

    Research output: Contribution to journal › Article › Research › peer-review

  23. 2010
  24. Published

    Verfahren zur Herstellung von hochfestem, niedrig legiertem Stahl

    Arth, G. (Inventor), Bernhard, C. (Inventor), Eckerstorfer, G. (Inventor), Hohenbichler, G. (Inventor) & Linzer, B. (Inventor), 2 Dec 2010, Patent No. 10193403.2-2122

    Research output: Patent

  25. Published

    The working group "continuous casting: Metallurgy and materials (M2CC)" at Leoben University, Austria

    Bernhard, C., Pierer, R. & Michelic, S. C., 1 Dec 2010, AISTech 2010 - Proceedings of the Iron and Steel Technology Conference. p. 977-986 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    ARVEDI ESP – REAL ENDLESS STRIP PRODUCTION: THE NEXT GENERATION OF PRODUCING HIGH-VALUE STEELS STARTED UP

    Bernhard, C., Bragin, S., Gelder, S., Linzer, B., Jungbauer, A., Venturini, R. & Guindani, A., 2010, ARVEDI ESP – REAL ENDLESS STRIP PRODUCTION: THE NEXT GENERATION OF PRODUCING HIGH-VALUE STEELS STARTED UP. p. ---

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    EINFLUSS DER STRECKENENERGIE UND SCHWEISZGESCHWINDIGKEIT AUF DAS ERSTARRUNGSVERHALTEN VON HÖCHSTFESTEN MAG UND MAG-FD NÄHTEN

    Vanovsek, W., Strauss, C. & Bernhard, C., 2010, join-ex 2010: Zusatzwerkstoffe und Gase. p. 15-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Kombinierter Einsatz analytischer und statistischer Methoden zur quantitativen und qualitativen Bestimmung des Reinheitsgrads von Stählen

    Michelic, S., Hartl, M., Wieser, G. & Bernhard, C., 2010, Kombinierter Einsatz analytischer und statistischer Methoden zur quantitativen und qualitativen Bestimmung des Reinheitsgrads von Stählen. Werkstoff-Informationsges., p. 359-364

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Metallurgische Einflüsse auf die Umformbarkeit von Stählen

    Buchmayr, B. & Bernhard, C., 2010, XXIX. Verformungskundliches Kolloquium. p. 5-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Polydimensional modelling of dendritic growth and microsegregation in multicomponent alloys

    Michelic, S., Thuswaldner, J. & Bernhard, C., 2010, In: Acta materialia. 58, p. 2738-2751

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    The Nature of Internal Defects in Continuously Cast Steel and their Impact on Final Product Quality

    Pierer, R. & Bernhard, C., 2010, AIST Proceedings 2010. p. 193-203

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Thermodynamic Description of the System Steel-Slag-Inclusion for Different Metallurgical Processes using FactSage

    Michelic, S., Hartl, M. & Bernhard, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    The Working Group "Continuous Casting: Metallurgy and Materials" (M²CC) at Leoben University

    Bernhard, C., Pierer, R. & Michelic, S., 2010, Proceedings of the AISTech 2010. p. 01-08

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Über die Bildung von Heißrissseigerungen in Stahl: Vergleichende Untersuchungen an Stranggussbrammen und Laborversuchsproben

    Reiter, J., Pierer, R., Ilie, S., Presslinger, H., Fluch, J. & Bernhard, C., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 129-135

    Research output: Contribution to journal › Article › Research › peer-review

  35. 2009
  36. Published

    Die Stranggießforschung am Lehrstuhl für Metallurgie: Entwicklung, Status und Ausblick

    Bernhard, C., 2009, In: Berg- und hüttenmännische Monatshefte : BHM. 154, p. 20-26

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Experimental Simulation of the Solidification of Steel at Higher Cooling Rate

    Linzer, B., Hohenbichler, G., Bragin, S., Arth, G. & Bernhard, C., 2009, 3rd International Conference on Simulation and Modelling of Metallurgical Processes in Steelmaking (Steelsim 2009). p. Paper -CC17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Experimental Simulation of the Solidification of Steel at Higher Cooling Rates

    Linzer, B., Hohenbichler, G., Bragin, S., Arth, G. & Bernhard, C., 2009, In: Berg- und hüttenmännische Monatshefte : BHM. 154, p. 498-503

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Metallurgische Herausforderungen neuer Legierungskonzepte am Beispiel von Induced Plasticity (IP)-Stählen

    Wiener, J., Gigacher, G., Penz, S. & Bernhard, C., 2009, In: Berg- und hüttenmännische Monatshefte : BHM. 154, p. 33-39

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Modelling Solidification in Continuous Casting: Algorithms and Boundary Conditions

    Michelic, S., Bernhard, C., Rauter, W., Erker, M. & Sormann, A., 2009, Modelling Solidification in Continuous Casting: Algorithms and Boundary Conditions. ASMET, p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Über die Bildung von Heißrissseigerungen in Stahl: Metallographische Analyse und Charakterisierung

    Pierer, R., Griesser, S., Reiter, J. & Bernhard, C., 2009, In: Berg- und hüttenmännische Monatshefte : BHM. 154, p. 346-353

    Research output: Contribution to journal › Article › Research › peer-review

  42. 2008
  43. Published

    Verfahren zur Herstellung eines Stahlbandes

    Bernhard, C. (Inventor), Eckerstorfer, G. (Inventor), Hohenbichler, G. (Inventor) & Linzer, B. (Inventor), 15 Oct 2008, Patent No. A 1593/2006

    Research output: Patent

  44. Published

    A model for predicting the austenite grain size at the surface of continuously cast slabs

    Bernhard, C., Reiter, J. & Presslinger, H., 2008, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 39, p. 885-895

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Austenite grain size in the continuous casting process: Metallographic methods and evaluation

    Reiter, J., Bernhard, C. & Presslinger, H., 2008, In: Materials characterization. 59, p. 737-746

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Characterization of hot tear segregations in continuous casting of slabs

    Ilie, S., Reiter, J., Presslinger, H., Fluch, J. & Bernhard, C., 2008, 6th European Conference on Continuous Casting 2008. p. -Paper -122

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Heat Transfer in a Round CC Mould: Measurement, Modelling and Validation

    Michelic, S., Rauter, W., Erker, M., Brandl, W. & Bernhard, C., 2008, 6th European Continuous Casting Conference. Associazione Italiana di Metallurgia, p. Paper-30

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    On the influence of carbon on secondary dendrite arm spacing in steel

    Pierer, R. & Bernhard, C., 2008, In: Journal of materials science. p. 6938-6943

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    On the Interrelation of Heat Withdrawal and Crack Formation in the Continuous Casting Mould

    Michelic, S., Bernhard, C., Rauter, W. & Sormann, A., 2008, ICASP-2 Second International Conference on Advances in Solidification Processes. ASMET, p. 7-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    The newly developed In-situ Material Characterization (IMC-) test: installation, start-up and first results

    Tubikanec, A., Chimani, C. & Bernhard, C., 2008, Proceedings of the 6th European Continuous Casting Conference. 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Über den Zusammenhang zwischen Primärstruktur und erstarrungsbedingten Fehlern am Beispiel der Heißrissbildung beim Stranggießen

    Reiter, J., Ilie, S., Pierer, R. & Bernhard, C., 2008, Fortschritte in der Metallographie. p. 185-190

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Why are some peritectic steels susceptible to surface crack formation in continuous slab casting?

    Xia, G., Bernhard, C., Ilie, S. & Fürst, C., 2008, Proceedings of the 6th European Continuous Casting Conference. p. Paper-22

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. 2007
  54. Published

    A Contribution to Hot Tearing in the Continuous Casting Process

    Pierer, R., Bernhard, C. & Chimani, C., 2007, In: Revue de métallurgie. p. 72-83

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    A Hot Tearing Criterion for the Continuous Casting Process

    Pierer, R., Michelic, S., Bernhard, C. & Chimani, C., 2007, A Hot Tearing Criterion for the Continuous Casting Process. Steel Institute VDEh, p. 893-900

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Determination of the nature of liquid steel - alumina interfacial interactions from sessile drop measurements: cases of Fe-Ti and Fe-P alloys

    Bernhard, C., Karasangabo, A., Presslinger, H. & Reisinger, P., 2007, Proceedings of the Chinese - European Exchange in Duesseldorf. p. 219-232

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Experimental Simulation of Defect Formation in the Continuous Casting Process

    Bernhard, C., Pierer, R., Tubikanec, A. & Chimani, C., 2007, SMEA Conference on the Effect of Melting, Refining and Casting on Product Quality and Properties. p. Session II-Paper 2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Numeric Modelling of the Heat Transfer in the Continuous Casting Mould

    Michelic, S., Bernhard, C. & Pierer, R., 2007, Numeric Modelling of the Heat Transfer in the Continuous Casting Mould. p. 209-215

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Simulation of austenite grain growth in continuous casting

    Bernhard, C., Reiter, J. & Presslinger, H., 2007, AISTEch2007. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Über Zusammenhang zwischen Prozess und Produktqualität beim Stranggießen von Stahl am Beispiel der Heißrissbildung

    Bernhard, C., 2007

    Research output: Thesis › Habilitation thesis › peer-review

  61. 2006
  62. Published

    A Contribution to Hot Tearing in the Continuous Casting Process

    Pierer, R., Bernhard, C. & Chimani, C., 2006, International ATS Steelmaking Conference. Ed. de la Revue de Métallurgie, p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Assessment of the Primary Structure of Slabs and the Influence on Hot- and Cold-Rolled Strip Structure

    Presslinger, H., Mayr, M., Tragl, E. & Bernhard, C., 2006, In: Steel research international. 77, p. 107-115

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Determination and Prediction of Austenite Grain Size in Relation to Product Quality of the Continuous Casting Process

    Reiter, J., Bernhard, C. & Presslinger, H., 2006, Determination and Prediction of Austenite Grain Size in Relation to Product Quality of the Continuous Casting Process. p. 805-816

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Die interaktive Stranggießsimulation auf www.steeluniversity.org

    Bernhard, C. & Sjökvist, T., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 189-195

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Einfluss der Prozessparameter auf die Erstarrung im VLBO-Prozess

    Zinner, S., Reiter, G., Bernhard, C., Schützenhöfer, W. & Rabitsch, R., 2006, Einfluss der Prozessparameter auf die Erstarrung im VLBO-Prozess. ASMET, p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    High Temperature Behavior during Solidification of Peritectic Steels under Continuous Casting Conditions

    Pierer, R. & Bernhard, C., 2006, High Temperature Behavior during Solidification of Peritectic Steels under Continuous Casting Conditions. p. 793-803

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Influence of alloying elements on the thermal contraction of peritectic steels during initial solidification

    Bernhard, C. & Xia, G., 2006, In: Ironmaking and steelmaking. 33, p. 52-56

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Lehrstuhl für Metallurgie

    Krieger, W., Bernhard, C., Korp, J., Hasenhündl, R. & Wiener, J., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 288-291

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Metallurgical Aspects of Casting High-Manganese Steel Grades

    Gigacher, G., Pierer, R., Wiener, J. & Bernhard, C., 2006, In: Advanced engineering materials. 8, p. 1096-1100

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Metallurgical Aspects of Casting High-Manganese Steels

    Gigacher, G., Bernhard, C., Pierer, R. & Wiener, J., 2006, In: Advanced engineering materials.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Methods for assessments of slab centre segregation as a tool to control slab continuous casting with soft reduction

    Presslinger, H., Ilie, S., Schiefermüller, A., Pissenberger, A., Parteder, E. & Bernhard, C., 2006, In: ISIJ international. 46, p. 1845-1851

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Modelling and experiments on kinetics of atmosphere purification by Argon purging in a high-temperature apparatus

    Anghelina, D., Karasangabo, A. & Bernhard, C., 2006, Proceedings of the CMFF'06. University of Technology and Economics, p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Steeluniversity.org – An Interactive E-Learning Resource on Steel Processing Technologies

    Michelic, S. & Bernhard, C., 2006, Proceedings des 13. Internationalen Studententags der Metallurgie. ASMET, p. 117-127

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    The interactive continuous casting simulation at www.steeluniversity.org

    Bernhard, C. & Sjökvist, T., 2006, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Why are some peritectic steels susceptible to surface crack formation for the continuously cast slab

    Xia, G., Bernhard, C., Fuerst, C. & Ilie, S., 2006, Proceedings of the Conference on Surface Quality of Continuously Cast Semis. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. 2005
  78. Published

    Verfahren zur Ermittlung von mechanischen Eigenschaften von Werkstoffen sowie Vorrichtung hierzu

    Bernhard, C. (Inventor), Chimani, C. (Inventor) & Tubikanec, A. (Inventor), 15 Dec 2005, Patent No. A852/2004

    Research output: Patent

  79. Published

    Evaluation of common constitutive equations for solidifying steel

    Pierer, R., Bernhard, C. & Chimani, C., May 2005, In: Berg- und hüttenmännische Monatshefte : BHM. 150.2005, 5, p. 163-169 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Forschungsarbeiten am Lehrstuhl für Metallurgie der Montanuniversität Leoben

    Krieger, W., Bernhard, C., Gigacher, G., Korp, J. & Plaul, J. F., 2005, In: Berg- und hüttenmännische Monatshefte : BHM. p. 399-407

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    High Temperature properties and the crack susceptibility of new steel grades for automotive purposes

    Gigacher, G., Pierer, R. & Bernhard, C., 2005, Proc. Computational Methods and Experimental Measurements in Material Characterisation. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. 2004
  83. Published

    Anforderungen an prozessorientierte Heißrissbildungsmodelle.

    Bernhard, C., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 90-95

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Bestimmung und Bedeutung der Randbedingungen für die Simulation von Stranggießprozessen.

    Lechner, M., Reiter, J., Bernhard, C., Forsthuber, M. & Zach, O., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 101-106

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Castability of Steels: Influence of the Interfacial Properties on the Continuous Casting Process.

    Karasangabo, A. & Bernhard, C., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 83-89

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Common hot tearing criteria and experimental validation

    Pierer, R., Bernhard, C. & Chimani, C., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 95-101

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Eigenschaften hochmanganhaltiger Stähle unter stranggießähnlichen Beanspruchungen.

    Gigacher, G., Bernhard, C. & Krieger, W., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 112-117

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Einsatz moderner Messtechnik zur Beurteilung der Erstarrungsvorgänge beim Stranggießen.

    Forsthuber, M., Rauter, W., Doringer, E., Bernhard, C. & Chimani, C., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 77-83

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Experimentelle Simulation von gegossenen Dünnbändern.

    Linzer, B., Bernhard, C. & Hohenbichler, G., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 107-111

    Research output: Contribution to journal › Article › Research › peer-review

  90. 2003
  91. Published

    Herstellung und Vergießbarkeit moderner Stähle für den Automobilbau

    Gigacher, G., Bernhard, C. & Krieger, W., 2003, In: Berg- und hüttenmännische Monatshefte : BHM. 148, p. 460-465

    Research output: Contribution to journal › Article › Research › peer-review

  92. 2002
  93. Published

    High Speed Casting versus Shell Strength.

    Bernhard, C., Wolf, M. & Hiebler, H., 2002, In: Berg- und hüttenmännische Monatshefte : BHM. 147, p. 43-47

    Research output: Contribution to journal › Article › Research › peer-review

  94. 2001
  95. Published

    Simulation of Solidification and Microstructure in Continuous Casting of Steel

    Bernhard, C., Thomas, B., Xia, G. & Chimani, C. M., 2001, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Verfolgung des Stickstoffgehaltes im LD-Stahlwerk bei der Erzeugung einzelner Stahlsorten

    Presslinger, H., Bernhard, C. & Höfer, W., 2001, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research › peer-review

  97. 2000
  98. Published

    How fast can we cast?

    Bernhard, C., Hiebler, H. & Wolf, M. M., 1 Dec 2000, In: Ironmaking and steelmaking. 27, 6, p. 450-454 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Experimental simulation of subsurface crack formation in continuous casting

    Bernhard, C., Hiebler, H. & Wolf, M. M., 1 Jan 2000, In: Revue de métallurgie. 97, 3, p. 333-344 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Simulation der Innenrissbildung beim Stranggießen von Stahl

    Bernhard, C., 2000, In: Berg- und hüttenmännische Monatshefte : BHM. p. 450-454

    Research output: Contribution to journal › Article › Research › peer-review

  101. 1999
  102. Published

    Mechanical properties and crack susceptibility of steel during solidification

    Hiebler, H. & Bernhard, C., 1 Jan 1999, In: Steel Research. 70.1999, 8-9, p. 349-355 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  103. 1996
  104. Published

    Simulation of shell strength properties by the SSCT test

    Bernhard, C., Hiebler, H. & Wolf, M. M., 1 Dec 1996, In: ISIJ international. 36, SUPPL.

    Research output: Contribution to journal › Article › Research › peer-review

  105. 1994
  106. Published

    Inner crack formation in continuous casting: Stress or strain criterion?

    Hiebler, H., Zirngast, J. & Bernhard, C., 1 Dec 1994, 77th Steelmaking conference proceedings. Vol. 77. p. 405-416 12 p. (Steelmaking Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 Next
View graph of relations

Contact

Phone: 2220

Latest Research Output

View more (290)