Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

2701 - 2800 out of 4,192Page size: 100

Research output

  1. 2012
  2. Published

    Influence of fiber placement and architecture on fracture mechanical properties of carbon fiber reinforced composites

    Stelzer, S., Schillfahrt, C., Wolfahrt, M., Pinter, G., Noisternig, J. & Frieß, S., 2012, Proc. National Sampe Conference & Exhibition. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Influence of induced shear work on the properties of polyolefine nanocomposite pipes

    Witschnigg, A., Laske, S., Kracalik, M. & Holzer, C., 2012, In: Polymer engineering and science. Volume 52, p. 1155-1160

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Influence of masterbatches on the bond strength of two-shot molded parts

    Kisslinger, T., Lucyshyn, T., Langecker, G. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Influence of the degree of exfoliation on the thermal conductivity of polypropylene nanocomposites

    Laske, S., Duretek, I., Witschnigg, A., Mattausch, H., Tscharnuter, D. & Holzer, C., 2012, In: Polymer engineering and science. 52, p. 1479-1753

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Injection molding compounding of polymer nanocomposites

    Battisti, M. & Friesenbichler, W., 2012, Abstract Book - The 28th International Conference of Polymer Processing Society (PPS-28). p. 278-278

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Injection molding compounding of PP polymer nanocomposites

    Battisti, M. & Friesenbichler, W., 2012, 5th International PMI Conference - Conference Proceedings. p. 134-140

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    In-line Qualitätskontrolle und Charakterisierung mittels NIR

    Witschnigg, A., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  9. Published

    Interactions of a cationic cellulose derivative with an ultrathin cellulose support

    Mohan, T., Zarth, C. S. P., Doliska, A., Kargl, R., Grießer, T., Spirk, S., Heinze, T. & Stana-Kleinschek, K., 2012, In: Carbohydrate Polymers. p. 1046-1053

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Investigation of Concepts Describing the Influence of Stress Concentration on the Fatigue Behaviour of Short Glass Fibre Reinforced Polyamide

    Eichlseder, W., Mösenbacher, A., Guster, C. & Pinter, G., 2012, Proceedings of the 15th European Conference on Composite Materials. Venice

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Investigation of sorbitol/polyhedral oligomeric silsesquioxane /carbon nanotubes / polypropylene nanocomposite spun fibers

    Mattausch, H. & Jana, S., 2012, The 28th International Conference of The Polymer Processing Society (PPS-28) Proceedings. p. 332-336

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Investigation of the slow crack growth behavior of static and cyclic loaded specimens of polyethylene by 2D and 3D optical fracture surface analysis

    Andreas, F., Bruckmoser, K., Redhead, A., Gruber, D. P. & Pinter, G., 2012, In: Macromolecular Symposia. 311, p. 103-111

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Investigation on failure mechanisms of electrical insulation in high voltage application

    Lenko, D., Schloegl, S., Kern, W., Bichler, S., Lemesch, G. & Ramsauer, F., 2012, In: VLK-News. 18, p. 22-23

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Keynote: The influence of nanostructures on cellular processes during differentiation of neuronal stem cells

    Schäfer, U., Haubenwallner, S., Katschnig, M., Holzer, C., Laske, S., Balika, W., Andraschek, N., Fasching, U. & Patz, S., 2012, Journal of Tissue Engineering and Regenerative Medicine. p. 83-83

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Kompaktierungs- und Ermüdungsverhalten von RTM-Laminaten

    Ladstaetter, E. M., 2012, 151 p.

    Research output: Thesis › Doctoral Thesis

  16. Published

    Kontinuierliche Schaumextrusion

    Laske, S., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  17. Published

    Kunststofftechnik Leoben: Rohrexpertise in Spanien Präsentiert

    Arbeiter, F., Pinter, G., Redhead, A. & Frank, A., 2012, In: VLK-News. p. 18-18

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Kunststoffverarbeitung

    Holzer, C., 2012, Programm. p. 49-81

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Lifetime prediction of multi-layer polyolefin pipes

    Arbeiter, F. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Lifetime prediction of polyethylene pipes

    Frank, A. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  21. Published

    Materialien zur Herstellung von optischen Wellenleitern mittels Zweiphotoenlithograpie

    Feldbacher, S., Woods, R., Kern, W., Kupfmüller, J. & Liska, R., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  22. Published

    Material- und Rissanalyse von Kunststoffkanülen aus LDPE

    Resch, K. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Mechanische Eigenschaften von Epoxidharz-Faserverbundwerkstoffen in Abhängigkeit vom Aushärtungsgrad

    Karpf, R. J., 2012, 73 p.

    Research output: Thesis › Master's Thesis

  24. Published

    Mechanische Kennwertermittlung von unterschiedlichen Thermoplasten

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Mechanische und thermische Charakterisierung von sieben verschiedenen glasfaserverstärkten Polymeren

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    Methods for measuring elongational viscosity of rubber compounds and enhancement of corresponding models

    Perko, L., Friesenbichler, W. & Obendrauf, W., 2012, BOOK OF ABSTRACTS ICR 2012 – XVIth International Congress on Rheology. p. 271-271

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Mode I delamination fatigue crack growth in unidirectional fiber reinforced composites: Development of a standardized test procedure

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N. & Pinter, G., 2012, In: Composites science and technology. 72, p. 1102-1107

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Modeling of the nonlinear viscoelasticity of polyoxymethylene in tension and compression

    Tscharnuter, D., Gastl, S. & Pinter, G., 2012, In: International journal of engineering science. 60, p. 37-52

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Modell-basierte Verarbeitung von Faser-Kunststoff-Verbunden

    Fauster, E., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Modulation of Materials Properties of Thin Surface Layers by Means of UV-Light

    Edler, M., 2012, 154 p.

    Research output: Thesis › Doctoral Thesis

  31. Published

    Molmassenverteilung von Granulatmuster "Lexan LS 2"

    Aust, N., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    Montanuniversität Leoben: Kolloquium Polymerer Leichtbau

    Schledjewski, R., 2012, In: Österreichische Kunststoff-Zeitschrift. p. 50-51

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Montanuniversität Leoben: Leichtbau mit polymeren Verbundwerkstoffen in der Umsetzung

    Schledjewski, R., 2012, In: News / Carbon Composites e.V.. 11, p. 25-25

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Nah-Infrarot Spektroskopie - Möglichkeiten der Qualitätskontrolle

    Witschnigg, A., Laske, S. & Holzer, C., 2012, Mit Compoundieren zum Erfolg. p. 69-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Neuer Ansatz für stoffliches Recycling von Altreifengummi

    Witschnigg, A., Laske, S. & Holzer, C., 2012, DepoTech 2012 Tagungsband. p. 353-358

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    NIR-spectroscopy for measuring the residence time distribution in continuous processes

    Witschnigg, A., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Novel silica nanoparticles with photoactive diazosulfonate groups

    Rieß, G., Schauberger, J., Koschell, K. & Kern, W., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Novel temperature dependent tensile test of freestanding copper thin film structures

    Smolka, M., Motz, C., Detzel, T., Robl, W., Grießer, T., Wimmer, A. C. & Dehm, G., 2012, In: Review of scientific instruments. Jun;(6), p. 064702/1-064702/9

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Numerical assessment of PE 80 and PE 100 pipe lifetime based on Paris-Erdogan Equation

    Frank, A., Hutar, P. & Pinter, G., 2012, In: Macromolecular Symposia. 311, p. 112-121

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Numerical simulation of crack growth in polyethylene composites by means of the cohesive zone model

    Janko, M., Ecker, W., Pinter, G. & Kolednik, O., 2012, In: Macromolecular Symposia. 311, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Oberflächenenergie-Bestimmung bei realen Prozesstemperaturen in der Kunststoffverarbeitung

    Berger, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    Oberflächenmodifizierung von Naturkautschuk-Latex: Optimierung der Oberflächeneigenschaften zur Herstellung von nicht allergenen medizinischen Handschuhen

    Kramer, R., 2012

    Research output: Thesis › Master's Thesis

  43. Published

    Optical and mechanical characterization of fluoropolymer films for pneumatic pre-stressed sun concentrators

    Hirschmann, B., Oreski, G., Resch, K. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    Optimierung von PLA/TPS Blends

    Hirschenauer, M., 2012

    Research output: Thesis › Master's Thesis

  45. Published

    Optische und mechanische Charakterisierung des Alterungsverhaltens von Materialien für die Anwendung in konzentrierenden Solarkollektoren

    Ottersböck, B., 2012

    Research output: Thesis › Master's Thesis

  46. Published

    Organische Photovoltaik

    Kern, W., 2012, Kunststoffe - Einsatz in Solarthermie und Photovoltaik. p. 99-123

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Patterned immobilisation of silicon dioxide nanoparticles on the surface of a photosensitive polymer

    Muhr, N., Kern, W. & Grießer, T., 2012, In: Thin solid films. 520, p. 1789-1793

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Patterned Immobilization of a Fluorescent Ru(II) Complex in Polymer Films Using the Photoreaction of Benzyl thiocyanate: Towards Color Emission Tuning of Electroluminescent Devices

    Köpplmayr, T., Cardinale, M., Rath, T., Trimmel, G., Rentenberger, S., Zojer, E., Kern, W. & Grießer, T., 2012, In: Macromolecular chemistry and physics. 213, p. 367-373

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Patterned Modulation of the Conductivity of Polyaniline by Means of Photolithography

    Grießer, T., Radl, S., Pavitschitz, A., Teichert, C., Edler, M., Köpplmayr, T., Rath, T., Trimmel, G., Schwabegger, G., Simbrunner, C., Sitter, H. & Kern, W., 2012, In: Chemistry of materials. p. 2922-2922

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Photochemical cross-linking of poly(vinyl alcohol): New strategies towards water-developable photoresists

    Manhart, J., Schlögl, S., Schauberger, J. & Kern, W., 2012.

    Research output: Contribution to conference › Poster › Research

  51. Published

    Photochemical cross-linking of XNBR latex via thiol-ene reaction

    Lenko, D., Schlögl, S., Kern, W., Schaller, R. & Holzner, A., 2012.

    Research output: Contribution to conference › Poster › Research

  52. Published

    Photochemisches Vernetzungsverfahren für Naturkautschuk-Latex

    Schloegl, S. & Kern, W., 2012, In: Kautschuk, Gummi, Kunststoffe. 01/02, p. 1-1

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Photocrosslinkable modified vegetable oil based resin for wood surface coating application

    Mahendran, A. R., Wuzella, G., Aust, N., Kandelbauer, A. & Müller, U., 2012, In: Progress in organic coatings. 74, p. 697-704

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Photo-Fries-based photosensitive polymeric interlayers for patterned organic devices

    Motaigne Ramil, A., Hernandez-Sosa, G., Grießer, T., Simbrunner, C., Höfler, T., Trimmel, G., Kern, W., Shen, Q., Teichert, C., Schwabegger, G., Sitter, H. & Serdar Sriciftci, N., 2012, In: Applied physics / A (Series A, Materials science & processing). Juni, p. 985-993

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Plastics Market

    Resch, K. & Wallner, G. M., 2012, Polymeric Materials for Solar Thermal Applications. p. 129-134

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  56. Published

    Polyamid-Folien für Skianwendungen: Einfluss von Haftvermittler und Weiterverarbeitungsschritte auf die Performance Eigenschaften

    Gloggnitzer, S., 2012

    Research output: Thesis › Master's Thesis

  57. Published

    Polymeric Sensors and Actuators

    Fink, J., 2012

    Research output: Book/Report › Book › Research

  58. Published

    Polymer selection and testing methodology for high demand applications under environmental conditions

    Guttmann, P., Röper, F. & Pilz, G., 2012, Polymeric Materials. p. 58-59

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Pre-vulcanization of natural rubber latex by UV techniques: a process towards reducting type IV chemical sensitivity of latex articles

    Schloegl, S., Schaller, R., Holzner, A. & Kern, W., 2012, In: Rubber chemistry and technology. 83, p. 133-148

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    PROCESS SELECTION OPTIMIZATION OF CFRP PARTS IN THE AEROSPACE INDUSTRY

    Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2012, Proceedings of ECCM 15. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Properties of chlorella-algea reinforced polyolefin compounds

    Laske, S., Piontek, M., Rieß, G. & Holzer, C., 2012,

    Program & Abstracts of PPS Americas Conference 2012

    .     p. 216-217

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Prüfung eines Bauteils aus CFK

    Stelzer, S., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  63. Published

    Raman-spectroscopic investigations of polymer morphology

    Bruckmoser, K. & Resch, K., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  64. Published

    Ramanspektroskopische Untersuchungen von Einschlüssen in PCTFE-Folien

    Bruckmoser, K., Pinter, G. & Resch, K., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  65. Published

    Replication of Microstructured Freeform Surface Parts in Injection Molding

    Burgsteiner, M., Müller, F., Wolfberger, A., Lucyshyn, T., Kukla, C. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Reversible photochromism of polynorbornenes bearing spiropyran side groups

    Hauser, L., Knall, A.-C., Roth, M., Trimmel, G., Edler, M., Grießer, T. & Kern, W., 2012, In: Monatshefte für Chemie = Chemical monthly. 143, p. 1551-1558

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Rheologie von Kunststoffschmelzen

    Duretek, I. & Schuschnigg, S., 2012, VDI Wissensforum, Extrusionswerkzeuge für Rohre und Profile. p. 1-32

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Rheology of wood plastics composites using by-pass-extrusion-rheometer on the twin screw extruder

    Duretek, I., Selvasankar, R. K., Langecker, G. & Holzer, C., 2012, 9th WPC, Natural Fibre and other innovative Composites Congress and Exhibition. p. A5-1-A5-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Runner balancing in multi-cavity injection molds by time controlled valve gates

    Lucyshyn, T., Müller, F., Doppelmayer, N., Rath, G., Kukla, C. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Runner balancing in multi-cavity injection molds by time controlled valve gates

    Lucyshyn, T., Müller, F., Doppelmayer, N., Rath, G., Kukla, C. & Holzer, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  71. Published

    Selective Photo-induced Cross-linking of Polynorbornenes: Towards the Fabrication of Polymer 2D - and 3D-Mircostructures

    Wolfberger, A., Grießer, T., Daschiel, U., Schmidt, V., Jerrar, A., Teichert, C. & Kern, W., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  72. Published

    Silica nanoparticles bearing a photoreactive shell

    Rieß, G., Schauberger, J., Muhr, N. & Kern, W., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  73. Published

    Simulation des "Single Via Thermal Cycle Test" - Modellerstellung und Bestimmung der Materialeingangsparameter

    Fellner, K., 2012

    Research output: Thesis › Master's Thesis

  74. Published

    Simulation des Tapelegeprozesses mit thermoplastischen Matrixmaterialien

    Narnhofer, M., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  75. Published

    Simulation of materials behaviour during in-situ consolidation using continuous welding processes like thermoplastic tape placement

    Schledjewski, R., Khan, M. A. & Mitschang, P., 2012, Proceedings ECCOMAS2012. p. 4298-4307

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Simulation of pipe failures

    Mitev, I. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  77. Published

    Simulation of the thermoplastic tape placement

    Maurer, D., Khan, M. A., Mitschang, P. & Schledjewski, R., 2012, Proceedings 4th European Conference on Materials and Structures in Aerospace – EUCOMAS 2012. p. 1-28

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Simulations and experiments of open hole tension tests - Assessment of intra-ply plasticity, damage, and localization

    Flatscher, T., Wolfahrt, M., Pinter, G. & Pettermann, H. E., 2012, In: Composites science and technology. 72, p. 1090-1095

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Spritzgießcompoundieren

    Battisti, M., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  80. Published

    Spritzgießcompoundieren nanoverstärkter Polypropylen-Compounds

    Battisti, M. & Friesenbichler, W., 2012, 21. Leobener Kunststoff-Kolloquium: Mit Compoundieren zum Erfolg. p. 61-68

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Spritzgießen reaktiver Formmassen

    Friesenbichler, W. & Perko, L., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  82. Published

    Spritzgießen von Kunststoffen

    Friesenbichler, W., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  83. Published

    Study of mechanical and physico-chemical surface properties of composites and their impact on bond strengths in repair technologies

    Jölly, I., Wolfahrt, M., Wolfberger, A., Pinter, G., Kern, W. & Noisternig, J., 2012, ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials. p. 1-1 (ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Surface characterization and functionalization of composites to optimize bonded repairs for aircraft structures

    Jölly, I., Schlögl, S., Wolfahrt, M. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  85. Published

    Synthesis and Characterization of a Bio-Based Resin from Linseed Oil

    Mahendran, A. R., Aust, N., Wuzella, G. & Kandelbauer, A., 2012, In: Macromolecular Symposia. 311, p. 18-27

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Systematische Entwicklung von Spritzguss-Bauteilen

    Friesenbichler, W., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  87. Published

    Temperature dependent fracture behavior of Rubbers used in the oil and gas industry

    Schrittesser, B., Pinter, G. & Major, Z., 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. (19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Temperature dependent mechanical tests

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  89. Published

    Temperature driven evolution of thermal, electrical, and optical properties of Ti-Al-N coatings

    Rachbauer, R., Gengler, J., Voevodin, A., Resch, K. & Mayrhofer, P. H., 2012, Proceedings of Acta Materialia. p. 2091-2096

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Temperature driven evolution of thermal, electrical, and optical properties of Ti-Al-N coatings

    Rachbauer, R., Gengler, J. J., Voevodin, A. A., Resch, K. & Mayrhofer, P. H., 2012, In: Acta materialia. 60, p. 2091-2096

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Tensile tests on pipe materials

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  92. Published

    The effect of particle size and coating of CaCO3 on the foaming behavior of a styrene butadiene block copolymer

    Geißler, B., Laske, S., Holzer, C. & Langecker, G., 2012, The 28th International Conference of The Polymer Processing Society (PPS-28). p. 184-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    The Influence of nanostructures on adhesion and survival of adult neural stem cells

    Holzer, C., Andraschek, N., Balika, W., Katschnig, M., Laske, S., Patz, S., Trattnig, C., Fasching, U. & Schäfer, U., 2012, Congress Documentation of BioNanoMed 2012 3rd International Congress. p. D3-D3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    The Influence of nanostructures on adhesion and survival of adult neutral stem cells

    Holzer, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  95. Published

    The influence of test frequency and eccentric crack growth on cyclic CRB tests

    Frank, A., Redhead, A. & Pinter, G., 2012, Proceedings of ANTEC 2012. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Thermal conductivity of polymer nanocomposites

    Kamaraj, M. P., 2012

    Research output: Thesis › Master's Thesis

  97. Published

    Thermal cure kinetics of epoxidized linseed oil with anhydride hardener

    Mahendran, A. R., Wuzella, G., Kandelbauer, A. & Aust, N., 2012, In: Journal of thermal analysis and calorimetry. 107, p. 989-998

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Thermal Decomposition Kinetics of Natural Fiber Reinforced Composite Using Model Free Kinetic Method

    Mahendran, A. R., Wuzella, G., Aust, N. & Müller, U., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  99. Published

    Thermische und mechanische Analysen von ß-Polypropylen

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  100. Published

    Thermische und optische Untersuchungen an mit INDUCON-Verfahren gefertigten Schweißnähten

    Arbeiter, F. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  101. Published

    Thermische Werkstoff-Charakterisierung von Spritzguss-Filterteilen aus PA6

    Pilz, G. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1...24 25 26 27 28 29 30 31 ...42 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301