Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

2301 - 2400 out of 4,193Page size: 100

Research output

  1. 2014
  2. Published

    Photo-induced crosslinking and thermal de-crosslinking in polynorbornenes bearing pendant anthracene groups

    Radl, S. V., Roth, M., Gassner, M., Wolfberger, A., Lang, A., Hirschmann, B., Trimmel, G., Kern, W. & Grießer, T., 2014, In: European polymer journal. 52, p. 98-104

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Photo-Induced Polymer Brush Growth on Thiol Terminated Self-Assembled Monolayers

    Mostegel, F., Rieger, P., Edler, M. & Grießer, T., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  4. Published

    Photoreactive Materials for Applications in Organic Electronics

    Wolfberger, A., 2014, 125 p.

    Research output: Thesis › Doctoral Thesis

  5. Published

    Photoreversible Crosslinking of Elastomer Materials

    Manhart, J., Fleischmann, D. D., Ayalur-Karunakaran, S., Grießer, T., Oesterreicher, A., Kern, W. & Schlögl, S., 2014, Photoreversible Crosslinking of Elastomer Materials. p. 60-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Photosensitive polymers for optical devices and organic electronics

    Grießer, T., 2014

    Research output: Thesis › Habilitation thesis › peer-review

  7. Published

    Photo-Vulcanization using thiol-ene chemistry: Film formation, morphology and network characteristics of UV crosslinked rubber latices

    Schlögl, S., Trutschel, M., Chassé, W., Letofsky-Papst, I., Schaller, R., Holzner, A., Rieß, G., Kern, W. & Saalwächter, K., 2014, In: Polymer. 55, p. 5584-5595

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Physical properteis of polyoxymethylene

    Fink, J., 2014, Polyoxymethylene handbook: Structure, properties, applications and its nanocomposites. p. 227-240

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  9. Published

    Polymeric Thermotropic Glazings for Overheating Protection: Systematic Polymer Science Based Optimisation of Performance Characteristics

    Weber, A., 2014, 249 p.

    Research output: Thesis › Doctoral Thesis

  10. Published

    Polymerization and manufacture of polyoxymethylene

    Fink, J., 2014, Polyoxymethylene handbook: Structure, properties, applications and its nanocomposites. p. 53-106

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  11. Published

    Polypropylene Multi Layer Pipe Lifetime Assessment Under Realistic Loading Conditions

    Arbeiter, F., Ševčík, M., Pinter, G., Frank, A. & Hutar, P., 2014, Proceedings of the 17 th Plastic Pipes Conference PPXVII. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Polyurethanharz - Laminate

    Gloggnitzer, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    PP-Polymer Nanocomposites with Improved Mechanical Properties Using Elongational Flow Devices at the Injection Molding Compounder

    Battisti, M. G. & Friesenbichler, W., 2014, In: AIP Conference Proceedings. 1593, p. 195-198

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Prediction of friction in injection molding by wetting parameters?

    Berger, G., Friesenbichler, W., Steffel, C. & Pacher, G., 2014, 6th International PMI Conference Proceedings. p. 61-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Prediction of residual lifetimes of small diameter polyethylene pipes

    Bredacs, M., Frank, A., Nitsche, D., Riha, A. & Pinter, G., 2014, 17th Plastic Pipes Conference PPXVII. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Preparation of PDMS ultrathin films and patterned surface modification with cellulose

    Bracic, M., Mohan, T., Kargl, R., Grießer, T., Doliska, A., Ribitsch, V., Stana-Kleinschek, K. & Fras-Zemljica, L., 2014, In: RSC Advances. 4, 23, p. 11955-11961

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Prepregs

    Schledjewski, R., 2014, Handbuch Faserverbundkunststoffe/Composites – Grundlagen, Verarbeitung, Anwendungen. p. 492-495

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  18. Published

    Production method evaluation for large cylindrical composite parts under a cost perspective

    Horejsi, K., Schneiderbauer, G., Tauchner, J., Schledjewski, R. & Noisternig, J., 2014, Proceedings of the16th European Conference on Composite Materials. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Properties and applications of nanoclay composites

    Mattausch, H., 2014, Polymer Nanoclay Composites.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  20. Published

    Prozessbasierte Kennwertermittlung (Permeabilität) mit anschließenden RTM-Versuchen manipulierter Preforms

    Kaufmann, S., 2014, 117 p.

    Research output: Thesis › Master's Thesis

  21. Published

    Prozessführungen und Materialformulierungen für physikalisch geschäumte Polymerprodukte

    Geißler, B., 2014, 192 p.

    Research output: Thesis › Doctoral Thesis

  22. Published

    Pultrusionsverfahren

    Schledjewski, R., Friedrich, K. & Wiedmer, S., 2014, Handbuch Verbundwerkstoffe: Werkstoffe, Verarbeitung, Anwendung. p. 317-323

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  23. Published

    Rapid Heat Cycle Molding, Surface Topography and Visual Appearance of Injection Molded Parts. Research Work in Leoben in the Last 10 Years.

    Berger, G., Friesenbichler, W., Gruber, D. P., Pacher, G. & Macher, J., 2014, ANTEC® 2014 - Proceedings of the Technical Conference & Exhibition. Brown, H. L. & Jones, D. H. (eds.). p. 1700-1705

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Reliability testing of backsheets: Comparison between module aged and free aged films

    Knausz, M., Oreski, G., Berger, K. A., Eder, G. C., Voronko, Y., Koch, T. & Pinter, G., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  25. Published

    Reliability testing of backsheets: Comparison between module aged and free aged films

    Knausz, M., Oreski, G., Berger, K. A., Eder, G. C., Voronko, Y., Pinter, G. & Koch, T., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    Shear and Extensional Viscosity Measurement for Rubber Compounds by Means of High Pressure Capillary Rheometry

    Friesenbichler, W., Fasching, M. & Perko, L., 2014, 30th International Conference of the Polymer Processing Scociety: DIGITAL BOOK OF ABSTRACTS AND CONFERENCE PAPERS. p. 16-285

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Short-term and Long-term Behavior of PP-Polymer Nanocomposites Produced by Injection Molding Compounding

    Battisti, M., Guttmann, P., Chitu, L. & Friesenbichler, W., 2014, 30th International Conference of the Polymer Processing Society. p. 649-649

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Silica nanoparticles bearing a photoreactive shell: interactions with polymer matrices and polymer surfaces

    Kern, W., Muhr, N., Rieß, G. & Schauberger, J., 2014, Symposium Polymerblends & Nanocomposites: Programme & Kurzreferate. Radusch, H.-J. (ed.). Halle (Saale), p. 31-31

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Silika-Nanopartikel in Glas-Glimmer Verbundwerkstoffen

    Wanner, A. J., Moser, A., Reichmann, A., Wewerka, K., Feuchter, M., Pinter, G. & Kern, W., 2014, Leobener Kunststoff-Kolloquium. p. 201-206

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Simulation of the 'Single Via Thermal Cycle Test' – Finite Element Modelling of PCBs under thermal loads

    Fellner, K., Fuchs, P. & Pinter, G., 2014, 13th Youth Symposium on Experimental Solid Mechanics. p. 29-32

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Simulationsgestützte Schneckengeometrieoptimierung für die Herstellung von nanoverstärkten Polypropylencompounds

    Winkler-Ebner, J., 2014

    Research output: Thesis › Master's Thesis

  32. Published

    Sink Mark Detection on Highly Reflective Plastics Surfaces

    Macher, J. G., 2014

    Research output: Thesis › Doctoral Thesis

  33. Published

    Sink mark shape dependin on holdin pressure and rapid heat c clemoldin -mathematical approimation and KE parameters

    Pacher, G. A., Gruber, D. P., Rescher, M., Berger, G. R. & Friesenbichler, W., 2014, 72nd Annual Technical Conference of the Society of Plastics Engineers, ANTEC 2014: The Plastics Conference. January ed. Vol. 2. p. 1716-1720 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Smart composite materials bearing photoswitchable crosslinks

    Radl, S. V., Grießer, T., Kreimer, M., Oesterreicher, A., Kern, W. & Schlögl, S., 2014, 3rd European Symposium of Photopolymer Science. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Smart Composite Tubes – Series Production of 3D Curved Hollow CFRP Tubes

    Schillfahrt, C., Schledjewski, R., Troi, V. & Schennach, O., 2014, 35th SAMPE Europe International Technical Conference (SEICO14). p. 94-100 7 p. P 23

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Spektroskopische Charakterisierung von Alterungsmechanismen in thermoplastischen Polyurethanen

    Bruckmoser, K. & Resch, K., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Spritzgießtechnologie

    Lucyshyn, T., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Static and dynamic tests of some rail damping pads

    Föttinger, J. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  39. Published

    Steigerung der thermischen Beständigkeit von Polymeren auf Basis nachwachsender Rohstoffe

    Ziegler, W., 2014, 110 p.

    Research output: Thesis › Master's Thesis

  40. Published

    Stiffness based fatigue characterisation of CFRP

    Brunbauer, J., Arbeiter, F., Stelzer, S. & Pinter, G., 2014, In: Advanced materials research. p. 166-171

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Stiffness based fatigue characterisation of CFRP

    Maier, J., Arbeiter, F., Stelzer, S. & Pinter, G., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  42. Published

    Strategies to improve the mechanical properties of high-density polylactic acid foams

    Geissler, B., Feuchter, M., Laske, S., Fasching, M., Holzer, C. & Langecker, G., 2014, In: Journal of Cellular Plastics [Elektronische Ressource]. p. 1-21

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Structured and Functional Elastomer-Based Composites with Tailored Friction Properties

    Manhart, J., Hausberger, A., Mühlbacher, I., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 2014, 22nd Annual International Conference of Composites/Nanoengineering (ICCE-22). p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Study of the Effects of Electric Parameters on the polyacrylamide NanoFilm Thickness Produced via Electro-Polymerization

    Shahsavan, F., Eslami, H. & Gooneie, A., 2014, Proceedings of 11th International Seminar on Polymer Science and Technology (ISPST2014). p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Synthesis, characterization, and properties of isocyanate-free urethane coatings from renewable resources

    Aust, N., 2014, In: Journal of Coatings Technology and Research. 11, p. 329-339

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Tailor-made high density pla foam sheets – strategies to improve the mechanical properties

    Geissler, B., Feuchter, M., Laske, S., Walluch, M., Holzer, C. & Langecker, G., 2014,

    Blowing Agents & Foaming Processes 2014

    .     p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Tailor-made high density PLA foam sheets – strategies to improve the mechanical properties

    Geißler, B., Feuchter, M., Laske, S., Walluch, M., Holzer, C. & Langecker, G., 2014, In: Cellular polymers. 33, p. 233-242

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Tailor-Made High Density PLA Foam Sheets - Strategies to Improve the Mechanical Properties

    Geissler, B., Feuchter, M., Laske, S., Walluch, M., Holzer, C. & Langecker, G. R., 2014, In: Cellular polymers. 33, 5, p. 249-257

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Technological approach to fatigue life prediction of CFRP

    Brunbauer, J. & Pinter, G., 2014, Eccm-16th European Conference on Composite Materials. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Technological approach to fatigue life prediction of CFRP

    Maier, J. & Pinter, G., 2014.

    Research output: Contribution to conference › Presentation › Research

  51. Published

    Test of a rail damping pad "SGT ZW700"

    Föttinger, J. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  52. Published

    Test of rail damping pad "ZW700 and Wpf A204"

    Föttinger, J. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  53. Published

    The Chemistry of Bio-based Polymers

    Fink, J., 2014

    Research output: Book/Report › Book › Research

  54. Published

    The Effect of Mineral Fillers on the Rheological, Mechanical and Thermal Properties of Halogen-Free Flame-Retardant Polypropylene/Expandable Graphite Compounds

    Mattausch, H., Laske, S., Hohenwarter, D. & Holzer, C., 2014, Proceedings of PPS 30.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    The effect of pre -shear history on the rheological behavior of Wood Plastic Composites

    Duretek, I. & Holzer, C., 2014, Proceedings of the 30th Annual Meeting of the Polymer Processing Society. p. 300-300

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    The effect of soil load on fracture behaviour of three-layer polymer pipe for non-pressurised applications

    Ševčík, M., Arbeiter, F., Hutar, P., Pinter, G. & Luboš, N., 2014, Key engineering materials. Vol. 627. p. 197-200 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  57. Published

    The Effect of Strain Rate on the Mechanical Properties of UD Glass-Fiber Reinforced Polymers

    Feuchter, M., Wolfahrt, M., Hirth, C. & Körber, H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  58. Published

    The influence of a hydrolysis-inhibiting additive on the degradation and biodegradation of PLA and its nanocomposites

    Stloukal, P., Kalendova, A., Mattausch, H., Laske, S., Holzer, C. & Koutny, M., 2014, In: Polymer Testing.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Thermokalorimetrische Analyse (DSC) an ABS/PA Bauteilen

    Moser, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  60. Published

    Thermomechanische Charakterisierung von Grünfolien

    Pilz, G. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  61. Published

    Thermo-mechnical characterisation of fluoropolymer films for concentrated solar thermal applications

    Hirschmann, B., Oreski, G. & Pinter, G., 2014, In: Solar energy materials and solar cells. 130, p. 615-622

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Thermotropic glazings for overheating protection. II. Morphology and structure-property relationships

    Weber, A., Klein, A. & Resch, K., 2014, In: Journal of Applied Polymer Science. p. 39910-1-13

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Thermotropic glazings for overheating protection. I. Material preselection, formulation, and light-shielding efficiency

    Weber, A. & Resch, K., 2014, In: Journal of Applied Polymer Science. p. 39950-1-13

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Thermotropic Overheating Protection Glazings: Effect of Functional Additives and Processing Conditions on Light-Shielding Efficiency

    Weber, A. & Resch, K., 2014, In: Journal of Polymer Engineering. 34, p. 161-172

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Thermotropic systems with fixed domains exhibiting enhanced overheating protection performance

    Weber, A. & Resch, K., 2014, In: Journal of Applied Polymer Science. p. 40417-1-10

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Tribological Investigations of Polyamide Nanocomposites

    Witschnigg, A., Laske, S., Duretek, I., Holzer, C., Chitu, L. & Bodner, S., 2014, Proceedings of the 30th Annual Meeting of the Polymer Processing Society. p. 756-756

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Unabhängige Lieferantenkontrolle

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  68. Published

    Untersuchungen von stumpfgeschweißten PE-Rohren mit bruchmechanischen Methoden

    Arbeiter, F., Pinter, G. & Frank, A., 2014, Tagungsband Polymertec 2014. p. 175-182

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Untersuchungen zur Rückgewinnung ausgewählter technischer Thermoplaste aus komplexen Abfallströmen

    Hoeggerl, G., 2014

    Research output: Thesis › Master's Thesis (University Course)

  70. Published

    Untersuchungen zur Vorhersagbarkeit der Reibung zwischen Polymeren und beschichteten sowie unbeschichteten Werkzeugoberflächen durch Benetzungsparameter

    Steffel, C., 2014

    Research output: Thesis › Master's Thesis

  71. Published

    Using Glass Covered Magnetic Micro-Wire Composites in Fiber Reinforced Polymeric Composites for Aeronautical Applications

    Konstantopoulos, S., Christopoulos, A., Schledjewski, R. & Hristoforou, E., 2014, In: Sensor Letters. 12

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    UV assisted microcellular foaming - A new approach towards the formation of 3D structures in offset printing techniques

    Schlögl, S., Reischl, M., Ribitsch, V. & Kern, W., 2014, UV assisted microcellular foaming - A new approach towards the formation of 3D structures in offset printing techniques. p. 50-50

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    UV-crosslinking of poly(vinyl alcohol) using cation exchanged montmorillonite

    Rieß, G., Schauberger, J. & Kern, W., 2014, 15. Problemseminar Polymerblends und Nanocomposites. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    UWG für Mikrogranulat

    Schuschnigg, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  75. Published

    UWG für Mikrogranulat

    Schuschnigg, S., 2014, WerWasWo.Forschung@MUL. p. 210-210

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  76. Published

    Verkürzung der Heizzeit bei der Verarbeitung von Elastomeren: K-Zeitung

    Perko, L., 2014

    Research output: Non-textual form › Web publication/site › Transfer

  77. Published

    Verwendung von Bohrloch-Cuttings als Füllstoff in Kunststoffen

    Holzer, C., Witschnigg, A., Laske, S., Kowalcyzk, D., Hofstätter, H. & Schulze, K., 2014, Tagungsband zur 12. DepoTech-Konferenz 2014. p. 431-434

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Vibrational analysis of PV modules

    Oreski, G., Knausz, M., Berger, K. A., Eder, G. C., Voronko, Y., Pinter, G. & Wassermann, J., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  79. Published

    Voraussetzungen für die hocheffiziente Kunststoffverarbeitung mittels Spritzgusses

    Lucyshyn, T., Janko, M., Struklec, T. & Holzer, C., 2014, 23. Leobener Kunststoff-Kolloquium: Hocheffiziente Verbundwerkstoffe. p. 87-98

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Werkstoffauswahl für den Einsatz von Kunststoffen in hochbeanspruchten Strukturbauteilen

    Röper, F., 2014

    Research output: Thesis › Diploma Thesis

  81. Published

    WerWasWo.Forschung@MUL 2014

    Schuschnigg, S. (Editor), 2014, Eigenverlag. (WerWasWo; vol. 5)

    Research output: Book/Report › Book › Transfer

  82. Published

    Wickel- und Tapelegetechnik

    Schledjewski, R., Schlottermüller, M., Neitzel, M., Beresheim, G., Mack, J. & Brzeski, M., 2014, Handbuch Verbundwerkstoffe: Werkstoffe, Verarbeitung, Anwendung. p. 325-355

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  83. Published

    Wireless in-mold melt front detection for injection molding: A long-term evaluation

    Müller, F., Kukla, C., Lucyshyn, T., Harker, M., Rath, G. & Holzer, C., 2014, In: Journal of Applied Polymer Science. 131, p. 5628-5638

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Wireless Melt Front Detection for Injection Moulding

    Müller, F., Kukla, C., Lucyshyn, T., Burgsteiner, M. & Holzer, C., 2014, ICIT & MPT 2014 Conference Proceedings . p. 153-159

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Wirtschaftlichkeitesbetrachtungen zur Herstellung von Bauteilen aus Hochleistungsverbundwerkstoffen

    Hueber, C., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  86. Published

    Zugversuche an Förderbändern aus kohlenstofffaserverstärktem PEEK

    Stelzer, S. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  87. Published

    Zugversuche an Isolatoren

    Gloggnitzer, S. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  88. 2013
  89. Published

    EXPLOSIVE CARTRIDGE

    Moser, P. (Inventor), Bauer, F. F. (Inventor), Friesenbichler, W. (Inventor), Fertschej, A. (Inventor) & Schatzer, R. (Inventor), 27 Nov 2013, IPC No. F42D C I, Patent No. ZA201206754, Priority date 25 Mar 2011, Priority No. WO2011EP54635

    Research output: Patent

  90. Published

    Injection-moulding compounding of PP polymer nanocomposites

    Battisti, M. G. & Friesenbichler, W., 25 Nov 2013, In: Strojniski vestnik = Journal of mechanical engineering. 59, 11, p. 662-668 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Bruchmechanik an Grenzflächen - Lebensdauervorhersagekonzepte für mehrschichtige Kunststoffkomponenten

    Arbeiter, F., 14 Nov 2013.

    Research output: Contribution to conference › Presentation › Research

  92. Published

    Methodenabstimmung für DSC-Untersuchungen von PET-Tennissaiten

    Pilz, G. & Guttmann, P., 4 Nov 2013

    Research output: Book/Report › Other report › Transfer › peer-review

  93. Published

    Comparison of fracture times of PE-HD pressure pipes and PP-Multilayer pipes using linear elastic fracture mechanics

    Arbeiter, F., 9 Sept 2013.

    Research output: Contribution to conference › Presentation › Research

  94. Published

    Photoinitiator

    Roth, M. (Inventor), Mostegel, F. (Inventor), Grießer, T. (Inventor), Edler, M. (Inventor), Oesterreicher, A. (Inventor), Gassner, M. (Inventor) & Billiani, J. (Inventor), 9 Sept 2013

    Research output: Patent

  95. Published

    METHODS AND APPARATUSES FOR PREPARING A THERMOSETTING MATERIAL AND INJECTION MOLDING METHODS AND APPARATUSES

    Friesenbichler, W. (Inventor) & Perko, L. (Inventor), 7 Aug 2013, IPC No. B29C45/72, Patent No. EP2621705 (A1)

    Research output: Patent

  96. Published

    Interlaminar fatigue crack growth in carbon fiber reinforced composites

    Stelzer, S., Jones, R. & Brunner, A., 30 Jul 2013.

    Research output: Contribution to conference › Presentation › Research

  97. Published

    Novel composite-composite joining technology with through the thickness reinforcement for enhanced damage tolerance

    Stelzer, S., Ucsnik, S., Tauchner, J., Unger, T. & Pinter, G., 29 Jul 2013.

    Research output: Contribution to conference › Presentation › Research

  98. Published

    Acoustic sensing in plastics moulding process

    Rath, G. (Inventor), Kukla, C. (Inventor), Lucyshyn, T. (Inventor) & Müller, F. (Inventor), 24 Jul 2013, IPC No. B29C 45/ 76 A I, Patent No. GB2498586, Priority date 23 Jan 2012, Priority No. GB20120001067

    Research output: Patent

  99. Published

    Wavelength selective refractive index modulation in a ROMP derived polymer bearing phenyl- and ortho-nitrobenzyl ester groups

    Edler, M., Mayrbrugger, S., Fian, A., Trimmel, G., Radl, S., Kern, W. & Griesser, T., 7 Jul 2013, In: Journal of Materials Chemistry C. 1, 25, p. 3931-3938 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Multi-physics simulation of the component attachment within embedding process

    Macurova, K., Kharicha, A., Pletz, M., Mataln, M., Bermejo, R., Schongrundner, R., Krivec, T., Antretter, T., Maia, W., Morianz, M. & Brizoux, M., 1 Apr 2013, 14th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2013. Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    RECYCLING OF BOREHOLE SOLIDS IN POLYMERS

    Holzer, C. (Inventor) & Hofstätter, H. (Inventor), 21 Mar 2013, IPC No. C08K 3/ 34 A I, Patent No. CA2848810, Priority date 14 Sept 2012, Priority No. WO2012EP68165

    Research output: Patent

  102. Published

    RECYCLING OF BOREHOLE SOLIDS IN POLYMERS

    Holzer, C. (Inventor) & Hofstätter, H. (Inventor), 21 Mar 2013, IPC No. C08K 3/ 34 A I, Patent No. WO2013037978, Priority date 16 Sept 2011, Priority No. EP20110181725

    Research output: Patent

Previous 1...20 21 22 23 24 25 26 27 ...42 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301