Department Polymer Engineering and Science
Organisational unit: Departments and Institutes
Research output
- 2015
- Published
The mold in the focus of research for improved quality of injection molded parts
Lucyshyn, T., 2015Research output: Thesis › Habilitation thesis › peer-review
- Published
The physics of light reflection and absorption of structured materials: novel methodologies for material simulation and testing
Gruber, D. P., 2015Research output: Thesis › Habilitation thesis › peer-review
- Published
Thermal expansion behavior of solar cell encapsulation materials
Knausz, M., Oreski, G., Schmidt, M., Guttmann, P., Berger, K. A., Voronko, Y., Eder, G., Koch, T. & Pinter, G., 2015, In: Polymer Testing. 44, p. 160-167Research output: Contribution to journal › Article › Research › peer-review
- Published
Thermoforming of polymer laminate films: Thermo-viscoelastic characterization
Truszkiewicz, E., Tscharnuter, D., Pilz, G. & Pinter, G., 2015, Mechanics of Solids, Structures and Fluids. American Society of Mechanical Engineers(ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 9-2015).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Thermo-mechanical and dielectric properties of epoxy nanocomposites containing inorganic nanoparticles
Kern, W., Wanner, A. J., Moser, A., Tsekmes, I. A., Kochetov, R. & Smit, J. J., 2015.Research output: Contribution to conference › Poster › Research
- Published
UV-Induced Modulation of Tribological Characteristics: Elastomeric Materials Featuring Controlles Anisotropic Friction Properties
Manhart, J., Hausberger, A., Mühlbacher, I., Lenko, D., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 2015.Research output: Contribution to conference › Presentation › Research
- Published
Versatile thiol-based reactions for micrometer- and nanometer-scale photopatterning of polymers and biomolecules
Mostegel, F., Ducker, R. E., Rieger, P., El Zubir, O., Xia, S., Radl, S. V., Edler, M., Cartron, M. L., Hunter, C. N., Leggett, G. J. & Grießer, T., 2015, In: Journal of Materials Chemistry B. 3, 21, p. 4431–4438Research output: Contribution to journal › Article › Research › peer-review
- Published
Visualization of Flow Patterns and Dead Volume in Rubber Processing by Means of Capillary Rheometry with various Die Geometries
Kerschbaumer, R., Lechner, B., Perko, L. & Friesenbichler, W., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 78 1 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Water-Based Chemicals and Technology for Drilling, Completion, and Workover Fluids
Fink, J., 2015, Burlington, MA: Elsevier.Research output: Book/Report › Book › Research
- 2014
- Published
MESSUNG VON AKUSTISCHEM RAUSCHEN ZUR STEUERUNG DER HERSTELLUNG EINES BAUTEILS AUS EINEM FLIESSFÄHIGEN GRUNDMATERIAL
Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor), Müller, F. (Inventor), Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Müller, F. (Inventor), 3 Dec 2014, IPC No. G01N 29/ 46 A I, Patent No. EP2807011, Priority date 20 Dec 2012, Priority No. WO2012EP76526Research output: Patent
- Published
Multi-scale finite element modeling to describe rolling contact fatigue in a wheel-rail test rig
Pletz, M., Daves, W., Yao, W., Kubin, W. & Scheriau, S., Dec 2014, In: Tribology International. 80, p. 147-155Research output: Contribution to journal › Article › Research › peer-review
- Published
Recycling of Borehole Solids in Polymers
Hofstätter, H. (Inventor) & Holzer, C. (Inventor), 20 Nov 2014, IPC No. C08K 5/ 00 A I, Patent No. US2014343219, Priority date 14 Sept 2012, Priority No. WO2012EP68165Research output: Patent
- Published
Effiziente Verarbeitung von Luftfahrt-Strukturbauteilen durch Einsatz automatisierter Profil-Preformfertigung
Schillfahrt, C., 13 Nov 2014.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Acoustic noise sensing for controlling manufacture of a component part made of a flowable base material
Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Mueller, F. (Inventor), 12 Nov 2014, IPC No. B29C 45/ 76 A I, Patent No. CN104144778, Priority date 20 Dec 2012, Priority No. WO2012EP76526Research output: Patent
- Published
Photolithographic patterning of cellulose: a versatile dual-tone photoresist for advanced applications
Wolfberger, A., Petritz, A., Fian, A., Herka, J., Schmidt, V., Stadlober, B., Kargl, R., Spirk, S. & Grießer, T., 16 Oct 2014, In: Cellulose. Volume 22, Issue 1, p. 717-727 11 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
ACOUSTIC NOISE SENSING FOR CONTROLLING MANUFACTURE OF A COMPONENT PART MADE OF A FLOWABLE BASE MATERIAL
Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Mueller, F. (Inventor), 8 Oct 2014, IPC No. B29C 45/ 76 A I, Patent No. KR20140119154, Priority date 20 Dec 2012, Priority No. WO2012EP76526Research output: Patent
- Published
Fracture Mechanical Analysis of Two Commercial Polyoxymethylene Homopolymer Resins
Berer, M., Pinter, G. & Feuchter, M., 5 Oct 2014, In: Journal of Applied Polymer Science. 131, 19Research output: Contribution to journal › Article › Research › peer-review
- Published
Mehrdimensional photostrukturierte Substrate auf der Grundlage von Monosaccharidderivaten, deren Oligomere und deren Polymere, und Herstellungsverfahren dafür
Stana Kleinschek, K. (Inventor), Spirk, S. (Inventor), Griesser, T. (Inventor), Kern, W. (Inventor), Kargl, R. (Inventor) & Ribitsch, V. (Inventor), 1 Oct 2014, IPC No. G03F 7/ 039 A I, Patent No. EP2784586, Priority date 27 Mar 2013, Priority No. EP20130002404Research output: Patent
- Published
Photoregeneration of Trimethylsilyl Cellulose as a Tool for Microstructuring Ultrathin Cellulose Supports
Wolfberger, A., Kargl, R., Grießer, T. & Spirk, S., Oct 2014, In: Molecules. 19, 10, p. 16266-16273Research output: Contribution to journal › Article › Research › peer-review
- Published
Robuste Prozessführung beim Kautschukspritzgießen unter Nutzung systematischer Simulation und verbesserter Materialdaten
Fasching, M., Berger, G., Friesenbichler, W., Filz, P. & Helbich, B., Oct 2014, In: GAK : Gummi, Fasern, Kunststoffe. 10/2014, p. 640-644 5 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Definition of stress intensity factor development and determination of crack growth kinetics in multi layer polypropylene pipes
Arbeiter, F., Hutař, P., Pinter, G. & Frank, A., 17 Sept 2014.Research output: Contribution to conference › Presentation › Research
- Published
Fracture toughness of high density polyethylene: Fatigue precracking versus femtolaser, razor sharpening and broaching
Salazar, A., Rodriguez, J., Arbeiter, F., Pinter, G. & Martínez, A. B., 17 Sept 2014.Research output: Contribution to conference › Presentation › Research
- Published
Selection of appropriate polyoxymethylene-based binder for powder injection molding feedstock
Gonzalez-Gutierrez, J., 8 Sept 2014, In: Zeitschrift Kunststofftechnik : Journal of plastics technology. 10, 5, p. 150 164 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Setting method for the semi-automatic production of a process-capable basic setting for an injection molding machine
Friesenbichler, W. (Inventor), 3 Sept 2014, IPC No. B29C45/76, Patent No. CN102264526 (B)Research output: Patent
- Published
RECYCLINGSVERFAHREN VON BOHRLOCHFESTKÖRPERN IN POLYMEREN
Holzer, C. (Inventor) & Hofstätter, H. (Inventor), 23 Jul 2014, IPC No. C08K 11/ 00 A I, Patent No. EP2756028, Priority date 14 Sept 2012, Priority No. WO2012EP68165Research output: Patent
- Published
УТИЛИЗАЦИЯ ЧАСТИЦ БУРОВОГО ШЛАМА В ПОЛИМЕРАХ
Хофштеттер, Х. (Inventor) & Holzer, C. (Inventor), 30 Jun 2014, IPC No. C08K 3/ 34 A I, Patent No. EA201490564, Priority date 14 Sept 2012, Priority No. WO2012EP68165Research output: Patent
- Published
Composite to composite joint with lightweight metal reinforcement for enhanced damage tolerance
Ucsnik, S., Stelzer, S., Sehrschön, H. & Sieglhuber, G., 25 Jun 2014.Research output: Contribution to conference › Presentation › Research
- Published
Determination of input parameters for a mix-mode cohesive zone formulation of a novel metal-CFRP-joining interface
Kronsteiner, J., Ucsnik, S. & Stelzer, S., 25 Jun 2014.Research output: Contribution to conference › Presentation › Research
- Published
Fatigue behavior of through the thickness reinforced joints
Stelzer, S., Ucsnik, S., Sehrschön, H., Tauchner, J. & Pinter, G., 22 Jun 2014.Research output: Contribution to conference › Presentation › Research
- Published
Untersuchungen von stumpfgeschweißten PE-Rohren mit bruchmechanischen Methoden
Arbeiter, F., 14 Jun 2014.Research output: Contribution to conference › Presentation › Research
- Published
Interface conditions of two-shot molded parts
Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G., Resch, K. & Holzer, C., 15 May 2014, Proceedings of PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers. p. 170-174 (AIP conference proceedings; vol. 1593).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
ВЗРЫВНОЙ ПАТРОН
Bauer, F. (Inventor), Moser, P. (Inventor), Friesenbichler, W. (Inventor), Schatzer, R. (Inventor) & Fertschej, A. (Inventor), 27 Apr 2014, IPC No. F42B 3/ 087 A I, Patent No. RU2012145175, Priority date 25 Mar 2011, Priority No. WO2011EP54635Research output: Patent
- Published
Elastomerprodukt mit kovalent gebundenen Partikel
Holzner, A. (Inventor), Kern, W. (Inventor), Lenko, D. (Inventor), Manhart, J. C. (Inventor), Schaller, R. (Inventor) & Schloegl, S. (Inventor), 16 Apr 2014, IPC No. C08K 9/ 08 A I, Patent No. EP2719710, Priority date 9 Oct 2012, Priority No. AT20120001087Research output: Patent
- Published
Elastomerprodukt mit kovalent gebundenen Partikeln
Schlögl, S. (Inventor), Lenko, D. (Inventor), Holzner, A. (Inventor), Kern, W. (Inventor), Schaller, R. (Inventor) & Manhart, J. (Inventor), 16 Apr 2014, Patent No. EP20130187847Research output: Patent
- Published
Verfahren zur Modifizierung der Oberfläche eines Elastomerproduktes
Schlögl, S. (Inventor), Holzner, A. (Inventor), Lenko, D. (Inventor), Schaller, R. (Inventor), Manhart, J. (Inventor) & Kern, W. (Inventor), 16 Apr 2014, Patent No. EP20130187837Research output: Patent
- Published
Smart Composite Tubes – Series Production of 3D Curved Hollow CFRP-Tubes
Schillfahrt, C., 10 Mar 2014.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
3D Optical Waveguides Produced by Two Photon Photopolymerisation of a Flexible Silanol Terminated Polysiloxane Containing Acrylate Functional Groups
Woods, R., Feldbacher, S., Zidar, D., Langer, G., Satzinger, V., Schmidt, V., Pucher, N., Liska, R. & Kern, W., 1 Mar 2014, In: Optical Materials Express. 4, 3, p. 486-498 13 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Einsatz der Simulation in der systematischen Bauteilentwicklung
Berger, G. & Friesenbichler, W., 27 Feb 2014, p. 1-38. 38 p.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Comparison of different methods for stress and deflection analysis in embedded die packages during the assembly process
Macurova, K., Bermejo Moratinos, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 1 Jan 2014, Proceedings - 2014 47th International Symposium on Microelectronics, IMAPS 2014. p. 355-360 6 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Migrationsarme Photoinitiatoren für Thiol-En / Thiol-In Systeme
Grießer, T. (Inventor), 1 Jan 2014Research output: Patent
- Published
Multidimensionally photopatterned substates on the basis of monosaccaride derivatives, their oligomers and their polymers and a method of production there of
Grießer, T. (Inventor), 1 Jan 2014Research output: Patent
- Published
Resin composition suitable for printing and printing mehtod utilizing the same, Patent application
Grießer, T. (Inventor), 1 Jan 2014Research output: Patent
- Published
Verfahren zur Herstellung eines epoxidbasierten Harzes und damit hergestelltes Harz
Grießer, T. (Inventor), 1 Jan 2014Research output: Patent
- Published
23. Leobener Kunststoff-Kolloquium - Hocheffiziente Verbundwerkstoffe
Schledjewski, R. (Editor), 2014, 23. Leobener Kunststoff-Kolloquium - Hocheffiziente Verbundwerkstoffe. Eigenverlag, (Schriftenreihe Kunststofftechnik Leoben; vol. 4).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
2D Permeabilitätsbestimmung von flächigen technischen Textilien
Grössing, H., 2014.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Additive Manufacturing mittels Legetechnik
Tonejc, M., 2014.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Adjustment of Organic Electronic Device Performance by Means of UV-Light
Edler, M., Grießer, T., Teichert, C., Zojer, E. & Marchl, M., 2014.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Alterungsbestimmungen an Kupplungsreiblamellen
Feuchter, M. & Pinter, G., 2014Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Analyse der Einstellparameter der Optimierungssoftware Cure²® und ihre Auswirkungen auf die Formteilqualität
Rüf, E., 2014, 114 p.Research output: Thesis › Master's Thesis
- Published
Analysis, Implementation and Investigation of a Wireless In-Mold Sensor for Injection Molding
Müller, F., 2014, 207 p.Research output: Thesis › Doctoral Thesis
- Published
Analysis of Double Percolated Networks of Polyamide Chains/Carbon Nanotubes under Shearing Flows
Gooneie, A., Nazockdast, H. & Shahsavan, F., 2014, Proceedings of 11th International Seminar on Polymer Science and Technology (ISPST2014). p. 1-2Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Analysis of Double Percolated Networks of Polyamide Chains/Carbon Nanotubes under Shearing Flows
Gooneie, A., 2014.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
A Novel Sink Mark Model for High Gloss Injection Molded Parts - Correlation of Deflectometric and Topographic Measurements
Macher, J., Gruber, D. P., Altenbuchner, T., Pacher, G., Berger, G. & Friesenbichler, W., 2014, In: Polymer Testing. 39, p. 12-19Research output: Contribution to journal › Article › Research › peer-review
- Published
Application Relevant Polymer Testing - Impact of Media on the Viscoelastic Behaviour of Engineering Polymers
Guttmann, P., Pilz, G. & Oelzant, D., 2014, EUROCORR 2014 - Book of Abstracts. p. 527-527Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Automated Preforming of Profiles for Efficient LCM-Processing of Structural Components in Aeronautic Applications
Fauster, E., Schillfahrt, C. & Schledjewski, R., 2014, Proceedings of Reinforced Plastics 2014 International BALATON Conference. p. 1-1Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Automatisierte Legeverfahren
Schledjewski, R., 2014, Handbuch Faserverbundkunststoffe/Composites – Grundlagen, Verarbeitung, Anwendungen. p. 233-236Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
- Published
BADGE/Aminhärter-Systeme für die Verklebung von Isolationskompositen
Zhang, Z., Moser, A., Feuchter, M., Wieser, B., Mühlbacher, I., Pinter, G., Schwarz, R., Pukel, G. J. & Wiesbrock, F., 2014, Leobener Kunststoff-Kolloquium. p. 207-212Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Bearbeitung, Oberflächenbehandlung
Schledjewski, R., Blinzler, M. & Hildebrandt, K., 2014, Handbuch Verbundwerkstoffe: Werkstoffe, Verarbeitung, Anwendung. p. 433-453Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
- Published
Bestimmung temperaturabhängiger Eigenschaften
Feuchter, M. & Pinter, G., 2014Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Bestimmung von Qualitätskriterien für Verpackungsfolien
Feuchter, M. & Pinter, G., 2014Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Biogene Kunststoffe für solartechnische Applikationen
Klein, A. & Resch, K., 2014.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Bioplastics for solar collector components
Klein, A. & Resch, K., 2014, BiPoCo 2014 - Conference Programme.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Bruchbeständigkeit einer extrusionsblasgeformten Kunststoffflasche in ihrem Produktlebenszyklus
Raimann, P., 2014, 81 p.Research output: Thesis › Master's Thesis
- Published
Bruchmechanische Methoden zur Abschätzung der Lebensdauer von thermoplastischen Rohrwerkstoffen
Pinter, G., Frank, A. & Arbeiter, F., 2014, Tagungsband Polymertec 2014. p. 142-145Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Calculation Tool for the Estimation of Injection Mold Deformation Based on FEM-Simulations
Lucyshyn, T., Kisslinger, T., Langecker, G. & Holzer, C., 2014, Proceedings of PPS2014. p. 1-3Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Cellulose based thin films as a platform for drug release studies to minick wound dressing materials
Maver, T., Maver, U., Mostegel, F., Grießer, T., Spirk, S., Smrke, D. M. & Stana-Kleinschek, K., 2014, In: Cellulose.Research output: Contribution to journal › Article › Research › peer-review
- Published
Challenges in measuring the degree of crosslinking of ethylene vinyl acetate
Oreski, G., Rauschenbach, A., Hirschl, C., Neumaier, L., Kraft, M. & Pinter, G., 2014, 29th European Photovoltaic Solar Energy Conference. p. 1-8Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Chapter 12: Injection Molding Compounding of Polymer Nanocomposites
Battisti, M. & Friesenbichler, W., 2014, New Developments in Polymer Composites Research. p. 301-324Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
- Published
Characterisation of quasi-brittle fatigue crack growth in pipe grade polypropylene block copolymer
Arbeiter, F., Pinter, G. & Frank, A., 2014, In: Polymer Testing. 37, p. 186-192Research output: Contribution to journal › Article › Research › peer-review
- Published
Characterization of Crack Initiation and Slow Crack Growth Resistance of PE100 and PE100-RC pipe Grades with Cyclic Cracked Round Bar Tests
Frank, A., Berger, I. J., Arbeiter, F. & Pinter, G., 2014, Proceedings of the 17 th Plastic Pipes Conference PPXVII. p. 1-10Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Characterization of the damping behavior of thin films with dynamic mechanic analysis in bending mode
Knapp, G., Leyrer, M., Oreski, G. & Pinter, G., 2014, ASME 2014 International Mechanical Engineering Congress & Exposition . p. 1-7Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Charakterisierung und Einfluss der rheologischen Eigenschaften auf die Schaummorphologie physikalisch geschäumter Polyethylenmaterialformulierungen
Uray, A., 2014, 84 p.Research output: Thesis › Master's Thesis
- Published
Charakterisierung und Evaluierung von Schlüsselparametern für die Herstellung defektfreier Isolationsverbundmaterialien
Weingrill, H., 2014Research output: Thesis › Master's Thesis
- Published
Charakterisierung von Kunststoffen in Hinblick auf inline Qualitätskontrolle in Extrusionsprozessen mittels Nahinfrarotspektroskopie
Witschnigg, A., 2014, 178 p.Research output: Thesis › Doctoral Thesis
- Published
Christian Doppler Laboratory for Functional and Polymer Based Ink-Jet Inks
Grießer, T. & Edler, M., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. 50-54Research output: Contribution to journal › Article › Research › peer-review
- Published
Christian Doppler Laboratory for High Efficient Composite Processing
Schledjewski, R., Grössing, H., Konstantopoulos, S., Hueber, C. & Tonejc, M., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. 1-9Research output: Contribution to journal › Article › Research › peer-review
- Published
Comparison of Algorithms for 2D Anisotropic Permeability Calculation in Terms of Uncertainty Propagation
Fauster, E., Grössing, H. & Schledjewski, R., 2014, Proceedings of the 16th European Conference on Composite Materials. p. 1-8Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Comparison of quasi-static and cyclic fatigue delamination resistance of CFRP under different mode loading
Stelzer, S., 2014, Proceedia Materials Science. p. 000-000Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Composite to composite joint with lightweight metal reinforcement for enhanced damage tolerance
Ucsnik, S., Stelzer, S., Sehrschön, H. & Sieglhuber, G., 2014, Composite to composite joint with lightweight metal reinforcement for enhanced damage tolerance. p. 1-1Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Compounding of polymer nanocomposites
Laske, S., 2014Research output: Thesis › Habilitation thesis › peer-review
- Published
CONTINUOUS ON-LINE ANALYSIS OF THE MATRIX FLOW THROUGH MANIPULATED RTM PREFORMS COMPARED TO NUMERICAL FILLING SIMULATIONS
Grössing, H., Schledjewski, R. & Kaufmann, S., 2014, SAMPE Tech US 2014. p. 1-14Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Correlation of Fracture Mechanics Based Lifetime Prediction and Internal Pipe Pressure Tests
Pinter, G., Frank, A., Berger, I. J. & Arbeiter, F., 2014, Proceedings of the 17 th Plastic Pipes Conference PPXVII. p. 1-10Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Crosslinking and post-crosslinking of EVA in PV modules
Oreski, G., Rauschenbach, A., Hirschl, C., Eder, G. C. & Pinter, G., 2014, 6th World Conference on Photovoltaic Energy Conversion. p. 1-2Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Crosslinking and post-crosslinking of EVA in PV modules
Oreski, G., Rauschenbach, A., Hirschl, C., Eder, G. C. & Pinter, G., 2014.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Cyclic loading of polyetheretherketone at high tensile stress levels
Berer, M., Major, Z., Pinter, G., Constantinescu, D. M. & Marsavina, L., 2014, Experimental Stress Analysis and Materials 14. Trans Tech Publications, p. 12-16 5 p. (Key Engineering Materials; vol. 601).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Defect depth determination in a CFRP structure using TSR technique
Oswald-Tranta, B., Maier, A. & Schledjewski, R., 2014Research output: Non-textual form › Web publication/site › Research
- Published
Dehnratenabhängige Werkstoffcharakterisierung und -modellierung faserverstärkter Kunststoffe
Hirth, C., Wolfahrt, M., Körber, H. & Hinterdorfer, S., 2014, Schriftenreihe Kunststofftechnik Leoben Band 04. p. 59-68Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Design independent lifetime assessment method for PCBs under low cycle fatigue loading conditions
Fuchs, P. F., Pinter, G. & Krivec, T., 2014, 15th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems. p. 1-8Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Detection of Visually Perceptible Sink Marks on High Gloss Injection Molded Parts by Phase Measuring Deflectometry
Macher, J., Gruber, D. P., Altenbuchner, T., Pacher, G., Berger, G. & Friesenbichler, W., 2014, In: Polymer Testing. p. 42-48Research output: Contribution to journal › Article › Research › peer-review
- Published
Determination of aging for different TPE-components
Feuchter, M. & Pinter, G., 2014Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Determination of aging for three different components
Feuchter, M. & Pinter, G., 2014Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Determination of a Robust Process Setting for an Injection Molded Mirror Drive Component Using D-Optimal DoE
Berger, G., Friesenbichler, W., Luger, H.-J., Gierth, M., Beytollahi, I. & Filz, P., 2014, 30th International Conference of the Polymer Processing Scociety: DIGITAL BOOK OF ABSTRACTS AND CONFERENCE PAPERS. p. 10-390Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Determination of crack growth kinetics in non-reinforced semi-crystalline thermoplastics using the linear elastic fracture mechanics (LEFM) approach
Pinter, G. & Berer, M., 2014.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Determination of input parameters for a mix-mode cohesive zone formulation in a novel metal-CFRP-joining interface
Kronsteiner, J., Ucsnik, S. & Stelzer, S., 2014, Proceedings of ECCM16. p. 1-1Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Determination of mechanical properties
Feuchter, M. & Pinter, G., 2014Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Determination of slow crack growth behaviour of polyethylene pressure pipes with cracked round bar test
Kratochvilla, T., Andreas, F. & Pinter, G., 2014, In: Polymer Testing. 40, p. 299-303Research output: Contribution to journal › Article › Research › peer-review
- Published
Dissolution Testing of Hardly Soluble Materials by Surface Sensitive Techniques: Clotrimazole from an Insoluble Matrix
Ehmann, H. M. A., Winter, S., Grießer, T., Keimel, R., Schrank, S., Zimmer, A. & Werzer, O., 2014, In: Pharmaceutical Research. p. 2708-2708Research output: Contribution to journal › Article › Research › peer-review
- Published
Dynamische Charakterisierung von Schienenbefestigungskomponenten aus polymeren Werkstoffen im Eisenbahnoberbau
Schneider, C., 2014, 91 p.Research output: Thesis › Master's Thesis
- Published
Effect of processing conditions on mechanical properties and morphology of poly(lacitc acid) staple fibers
Bruckmoser, K. & Resch, K., 2014,Programm & Abstract Booklet
. p. 19-19Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Effects of the polymeric niche on neural stem cell characteristics during primary culturing
Katschnig, M., Haubenwallner, S., Fasching, U., Patz, S., Trattnig, C., Andraschek, N., Grünbacher, G., Absenger, M., Laske, S., Holzer, C., Balika, W., Bauer, G. & Schäfer, U., 2014, In: Journal of materials science / Materials in medicine.Research output: Contribution to journal › Article › Research › peer-review
