Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

701 - 750 out of 4,193Page size: 50

Research output

  1. 2021
  2. Published

    Advanced processing of thermoplastic-based particulate composites

    Gonzalez-Gutierrez, J., 2021

    Research output: Thesis › Habilitation thesis › peer-review

  3. Published

    Assessment of the stepped isothermal method for accelerated creep testing of high-density polyethylene

    Pilz, G., Wurzer, S., Morak, M. & Pinter, G., 2021, In: Mechanics of time-dependent materials.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Crosslinking of Diene-Rubber Latices employing the thiol-ene photoreaction for the production of non-allergenic medical gloves

    Grabmayer, T., Schlögl, S., Schaller, R., Holzner, A. & Kern, W., 2021.

    Research output: Contribution to conference › Poster › Research

  5. Published

    Data-Driven Fault Detection and Identification in Rubber Injection Molding

    Hutterer, T., 2021

    Research output: Thesis › Doctoral Thesis

  6. Published

    Defect monitoring and control for thermoplastic Automated Tape Layup

    Yadav, N. & Schledjewski, R., 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    Design of multi-gradient photopolymers for controlled transport of water droplets

    Rossegger, E., Grießer, T. & Schlögl, S., 2021.

    Research output: Contribution to conference › Poster › Research

  8. Published

    Development of functional polymers for health monitoring of electronic systems

    Bautista-Anguís, D., Wolfberger, A. & Schlögl, S., 2021.

    Research output: Contribution to conference › Poster › Research

  9. Published

    Development of novel matrix materials for type V hydrogen gas pressure vessels

    Florian, W., Wolfahrt, M., Schlögl, S. & Wolfberger, A., 2021.

    Research output: Contribution to conference › Poster › Research

  10. Published

    Digital Light Processing 3D Printing of Modified Liquid Isoprene Rubber using Thiol-Click Chemistry

    Strohmeier, L., Frommwald, H. & Schlögl, S., 2021.

    Research output: Contribution to conference › Poster › Research

  11. Published

    Digital light processing 3D printing of multi-materials based on a dual-curing system

    Cazin, I., Fleisch, M., Gleirscher, M., Sangermano, M. & Schlögl, S., 2021.

    Research output: Contribution to conference › Poster › Research

  12. Published

    Digital light processing 3D-printing of photocurable diene-rubber

    Strohmeier, L., Frommwald, H. & Schlögl, S., 2021.

    Research output: Contribution to conference › Poster › Research

  13. Published

    Digital light processing 3D printing with thiol–acrylate vitrimers

    Rossegger, E., Höller, R., Reisinger, D., Strasser, J., Fleisch, M., Grießer, T. & Schlögl, S., 2021.

    Research output: Contribution to conference › Poster › Research

  14. Published

    Digital light processing 3D printing with thiol–acrylate vitrimers

    Rossegger, E., Höller, R., Reisinger, D., Strasser, J., Fleisch, M., Grießer, T. & Schlögl, S., 2021.

    Research output: Contribution to conference › Poster › Research

  15. Published

    DLP 3D-printing of modified epoxy resins for electrically conductive structures

    Strohmeier, L., Pishvazadeh Moghaddam, H., Thalhamer, A., Fuchs, P. F., Alabiso, W., Schlögl, S. & Wolfberger, A., 2021.

    Research output: Contribution to conference › Poster › Research

  16. Published

    Duromere Matrixsysteme aus nachwachsenden Rohstoffen für den Einsatz in naturfaserverstärkten Verbundwerkstoffen

    Todorovic, A., 2021

    Research output: Thesis › Doctoral Thesis

  17. Published

    Effect of backbone selection on the solvent debinding of metal injection moulding feedstocks

    Kukla, C., Cano, S., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 2021, Euro PM2021 Congress Proceedings. (Euro PM2021 Congress Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Effect of the acidity of organic phosphate and phosphonate catalysts in thiol-click vitrimer networks

    Moazzen, K., Rossegger, E., Alabiso, W., Shaukat, U. & Schlögl, S., 2021.

    Research output: Contribution to conference › Poster › Research

  19. Published

    Einfluss von unterschiedlichen Schmelzrippen-Geometrien auf die Dichtheit von Kunststoffumspritzungen von Steckverbindern

    Preissegger, F., 2021

    Research output: Thesis › Master's Thesis

  20. Published

    Experimental investigation of morphological and thermomechanical properties of frontally cured carbon fibre reinforced epoxy composites

    Grasser, V., 2021

    Research output: Thesis › Master's Thesis

  21. Published

    Experimental study and numerical simulation on rheological properties of PA66GF30 and ABS under pressure

    Gao, F., 2021

    Research output: Thesis › Master's Thesis

  22. Published

    Fully bio-based high-performance thermoset

    Todorovic, A., Blößl, Y. (Co-editor) & Resch-Fauster, K. (Co-editor), 2021.

    Research output: Contribution to conference › Poster › Research

  23. Published

    Functional hierarchical composites for structural applications

    Feuchter, M., Sieberer, M. & Kern, W., 2021, Polymer Meeting 14 - Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Funktionalisierung und Optimierung von Anti-Haft-Beschichtungen auf Organosilan-Basis

    Müller, M., 2021

    Research output: Thesis › Master's Thesis

  25. Published

    Impregnation of natural fiber reinforcements in liquid composite molding processes

    Blößl, Y., 2021

    Research output: Thesis › Doctoral Thesis

  26. Published

    Investigating novel concepts to characterize the resistance against rapid crack propagation of polyamide 12 pipe grades

    Waly, C., 2021

    Research output: Thesis › Master's Thesis

  27. Published

    Investigation of mechanical anisotropy and interlayer bonding in thermoplastic composites produced by additive manufacturing

    Khudiakova, A., 2021

    Research output: Thesis › Doctoral Thesis

  28. Published

    Local UV-Mediated Photoactivation of Vitrimeric Polymers

    Reisinger, D., Kaiser, S. J., Rossegger, E., Rieger, B. & Schlögl, S., 2021.

    Research output: Contribution to conference › Poster › Research

  29. Published

    Mechanical Behavior of Hyperelastic Fiber-Reinforced Composites

    Mansouri, M. R., 2021

    Research output: Thesis › Doctoral Thesis

  30. Published

    Mechanical flexible and biodegradable thermoset with 100 % bio-based carbon content

    Schwaiger, M. & Resch-Fauster, K., 2021.

    Research output: Contribution to conference › Poster › Research

  31. Published

    Mechanical properties of layered polymers

    Arbeiter, F., 2021

    Research output: Thesis › Habilitation thesis › peer-review

  32. Published

    Morphological characterization of semi-crystalline POM using nanoindentation

    Christöfl, P., Czibula, C., Seidlhofer, T., Berer, M., Macher, A., Helfer, E., Schrank, T., Oreski, G., Teichert, C. & Pinter, G., 2021, In: International journal of polymer analysis and characterization. 26.2021, 8, p. 692-706 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Neuartige Harze und Komposite mit volumetrischer Expansion während der Härtung

    Marx, P., 2021

    Research output: Thesis › Doctoral Thesis

  34. Published

    Neuartige Leichtbaumaterialien mit 100% biobasiertem Kohlenstoffanteil

    Todorovic, A., Blößl, Y. & Resch-Fauster, K., 2021, In: ACstyria newsletter .

    Research output: Contribution to journal › Article › Transfer

  35. Published

    New approaches towards stimuli-responsive polymers

    Giebler, M., 2021

    Research output: Thesis › Doctoral Thesis

  36. Published

    Nur mit Öl und Säure: Von der Zitronensäure zu biobasierten Hochleistungs-Composites

    Todorovic, A., Resch-Fauster, K., Blößl, Y. & Schledjewski, R., 2021, In: CU reports : internationales Mitgliedermagazin des Composites United. [Deutsche Ausgabe] . 2021, 2, p. 28-29 2 p.

    Research output: Contribution to journal › Article › Research

  37. Published

    On the viability of the Laser Flash method for fast and total thermal characterisation of polymers: Extending the limits through inverse problem solving

    Rapp, D., 2021

    Research output: Thesis › Master's Thesis

  38. Published

    Organic phosphate and phosphonates as efficient catalysts for thiol-click vitrimers

    Wanghofer, F., Oreski, G., Schlögl, S. & Wolfberger, A., 2021.

    Research output: Contribution to conference › Poster › Research

  39. Published

    Organic phosphate and phosphonates as efficient catalysts for thiol-click vitrimers

    Moazzen, K., Rossegger, E., Alabiso, W., Shaukat, U. & Schlögl, S., 2021.

    Research output: Contribution to conference › Poster › Research

  40. Published

    Organic Phosphates and Phosphonates as Efficient Catalysts for Thiol-Click Vitrimers

    Moazzen, K., Rossegger, E., Alabiso, W., Shaukat, U. & Schlögl, S., 2021.

    Research output: Contribution to conference › Poster › Research

  41. Published

    PermeabilityNets: Comparing Neural Network Architectures on a Sequence-to-Instance Task in CFRP Manufacturing

    Stieber, S., Schroter, N., Fauster, E., Schiendorfer, A. & Reif, W., 2021, Proceedings - 20th IEEE International Conference on Machine Learning and Applications, ICMLA 2021. Wani, M. A., Sethi, I. K., Shi, W., Qu, G., Raicu, D. S. & Jin, R. (eds.). Institute of Electrical and Electronics Engineers, p. 694-697 4 p. (Proceedings - 20th IEEE International Conference on Machine Learning and Applications, ICMLA 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Petroleum Engineer's Guide to Oil Fild Chemicals and Fluids

    Fink, J., 2021

    Research output: Book/Report › Book › Research

  43. Published

    Photolatent bases for a spatially resolved activation of dynamic transesterification in vitrimeric polymers

    Reisinger, D., Kaiser, S., Rossegger, E., Alabiso, W., Rieger, B. & Schlögl, S., 2021.

    Research output: Contribution to conference › Poster › Research

  44. Published

    Polymer fracture mechanics extended to large plastic deformation and mixed mode loading

    Gosch, A., 2021

    Research output: Thesis › Doctoral Thesis

  45. Published

    Polymers and Additives in Extreme Environments

    Fink, J., 2021

    Research output: Book/Report › Book › Research

  46. Published

    Processing of Fibre-Reinforced Polymer Composites Based on Phenomenological Models

    Fauster, E., Hergan, P. & Schledjewski, R., 2021, Polymer Meeting 14: Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Process simulation for digital light processing (DLP) based 3D printing

    Thalhammer, A., Strohmeier, L., Pishvazadeh Moghaddam, H., Wolfberger, A. & Fuchs, P., 2021.

    Research output: Contribution to conference › Poster › Research

  48. Published

    Quantification of tactile surface perception with a focus on contact area analysis via neural networks

    Ules, T., Haselmann, M., Grießer, M., Hausberger, A., Schlögl, S. & Gruber, D. P., 2021.

    Research output: Contribution to conference › Poster › Research

  49. Published

    Reinforcement of elastomers to obtain anisotropic material properties

    Beter, J., 2021

    Research output: Thesis › Doctoral Thesis

  50. Published

    Simultaneous Structural and Material Optimization

    Lang, M. C., 2021

    Research output: Thesis › Doctoral Thesis

  51. Published

    Spatially resolved photoactivation of dynamic exchange reactions in vitrimeric polymers

    Kaiser, S. J., Reisinger, D., Rossegger, E., Alabiso, W., Rieger, B. & Schlögl, S., 2021.

    Research output: Contribution to conference › Poster › Research

Previous 1...11 12 13 14 15 16 17 18 ...84 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301