Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

1001 - 1100 out of 4,192Page size: 100

Research output

  1. 2019
  2. Published

    Anhydride Cured Bio-Based Epoxy Resin: Effect of Moisture on Thermal and Mechanical Properties

    Anusic, A., Resch-Fauster, K., Mahendran, A. R. & Wuzella, G. H., 25 Apr 2019, In: Macromolecular materials and engineering. 304.2019, 7, 9 p., 1900031.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    FE-Modelle zur Vorhersage des Versagens in stahlseilverstärkten elastomeren Fördergurten

    Frankl, S. M., 25 Apr 2019.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Kombinierte Struktur- und Materialoptimierung

    Lang, M. C., 25 Apr 2019.

    Research output: Contribution to conference › Poster › Research › peer-review

  5. Published

    Study on incorrect predictions for simulations of the vacuum infusion process

    Sebastian, R. G., Obertscheider, C. & Schledjewski, R., 25 Apr 2019, 28. Leobener Kunststoff-Kolloquium 2019: Schriftenreihe Kunststofftechnik Leoben. Schuecker, C. & Fuchs, P. (eds.). Vol. 9.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Viskoelastische Charakterisierung, Modellierung und Strömungssimulation hochgefüllter Kautschukmischungen

    Stieger, S., Roman Christopher, K., Berger-Weber, G. & Friesenbichler, W., 25 Apr 2019, 28. Leobener Kunststoff-Kolloquium: Simulation in der Kunststofftechnik. Leoben: Eigenverlag, Vol. 09. p. 78-88 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Uncertainty propagation and sensitivity analysis in composite manufacturing cost estimation: ALPHA-framework and cost tool development

    Hueber, C., Schwingshandl, N. & Schledjewski, R., 19 Apr 2019, In: Advanced Manufacturing: Polymer and Composites Science. 5.2019, 2, p. 69 - 84 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Real-Time Measurement of Dynamic Wheel-Rail Contacts Using Ultrasonic Reflectometry

    Zhou, L., Brunskill, H., Pletz, M., Daves, W., Scheriau, S. & Lewis, R., 16 Apr 2019, In: Journal of Tribology. 141.2019, 6, 9 p., 061401.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    High-density polyethylene as phase-change material: Long-term stability and aging

    Weingrill, H., Resch-Fauster, K., Lucyshyn, T. & Zauner, C., 10 Apr 2019, In: Polymer Testing. 76.2019, July, p. 433-442 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Rheological behaviour of highly-filled polymers for Metal Injection Moulding

    Kukla, C., Slemenik Perše, L., Bek, M., Gonzalez-Gutierrez, J. & Holzer, C., 9 Apr 2019. 1 p.

    Research output: Contribution to conference › Poster › Research

  11. Published

    Optimisation of the interfacial bonding in polypropylene filled with different types of glass spheres produced by extrusion-based additive manufacturing

    Spörk, M. & Gonzalez-Gutierrez, J., 8 Apr 2019, p. 87-87. 1 p.

    Research output: Contribution to conference › Abstract

  12. Published

    Rheological behaviour of highly-filled polymers for Metal Injection Moulding

    Bek, M., Gonzalez-Gutierrez, J., Slemenik Perše, L., Holzer, C. & Kukla, C., 8 Apr 2019, p. 117-117. 1 p.

    Research output: Contribution to conference › Abstract

  13. Published

    Tensile properties of sintered 17-4PH stainless steel fabricated by material extrusion additive manufacturing

    Gonzalez-Gutierrez, J., Arbeiter, F., Schlauf, T., Kukla, C. & Holzer, C., 8 Apr 2019, In: Materials letters. 248.2019, 1 August, p. 165-168 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Determination of the material data for the CIM-feedstock "2"

    Duretek, I., 4 Apr 2019, 17 p.

    Research output: Book/Report › Commissioned report › Research

  15. Published

    Relation between degradation of polymeric components in crystalline silicon PV module and climatic conditions: A literature review

    Omazic, A., Oreski, G., Halwachs, M., Eder, G. C., Hirschl, C., Neumaier, L., Pinter, G. & Erceg, M., 1 Apr 2019, In: Solar energy materials and solar cells. 192.2019, April, p. 123-133 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Bestimmung der thermodynamischen und rheologischen Stoffdaten für ein gefülltes Polypropylen

    Duretek, I., 28 Mar 2019, 10 p.

    Research output: Book/Report › Commissioned report › Research

  17. Published

    Filament-extrusion 3D printing of hardmetal and cermet parts

    Lengauer, W., Duretek, I., Fürst, M., Gonzalez-Gutierrez, J., Schuschnigg, S. & Kukla, C., 25 Mar 2019, p. 77-78. 2 p.

    Research output: Contribution to conference › Paper › peer-review

  18. Published

    Bestimmung der thermodynamischen und rheologischen Stoffdaten für ein ungefülltes Polypropylen

    Duretek, I., 14 Mar 2019, 11 p.

    Research output: Book/Report › Commissioned report › Research

  19. Published

    Vergleichende MFR Messungen an 6 PP Proben mit unterschiedlicher thermomechanischer Vorgeschichte

    Duretek, I. & Wallner, A., 14 Mar 2019, 4 p.

    Research output: Book/Report › Commissioned report › Research

  20. Published

    Custom OpenFOAM solver for modelling Liquid Composite Moulding processes

    Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 13 Mar 2019.

    Research output: Contribution to conference › Abstract

  21. Published

    Efficient cooling of hot spots in injection molding. A biomimetic cooling channel versus a heat‐conductive mold material and a heat conductive plastics

    Berger-Weber, G., Zorn, D., Friesenbichler, W., Bevc, F. & Bodor, C. J., 9 Mar 2019, In: Polymer engineering and science. 59.2019, s2, p. E180-E188 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Spatially Resolved Cross-Linking Characterization by Imaging Low-Coherence Interferometry

    Taudt, C., Nelsen, B., Rossegger, E., Schlögl, S., Koch, E. & Hartmann, P., 7 Mar 2019, In: Sensors (Basel, Switzerland). 19.2019, 5, 12 p., 1152.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Evaluation of Digital Image Correlation Techniques for the Determination of Coefficients of Thermal Expansion for Thin Reinforced Polymers

    Gschwandl, M., Frewein, M., Fuchs, P. F., Antretter, T., Pinter, G. & Novak, P., 5 Mar 2019, EMAP 2018 - 2018 20th International Conference on Electronic Materials and Packaging. Institute of Electrical and Electronics Engineers, 8660763. (EMAP 2018 - 2018 20th International Conference on Electronic Materials and Packaging).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Additive manufacturing of zirconia parts by fused filament fabrication and solvent debinding: Selection of binder formulation

    Cano Cano, S., Gonzalez-Gutierrez, J., Sapkota, J., Spörk, M., Arbeiter, F., Schuschnigg, S., Holzer, C. & Kukla, C., 1 Mar 2019, In: Additive Manufacturing. 26.2019, March, p. 117–128 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Lifetime assessment of anisotropic materials by the example short fibre reinforced plastic

    Primetzhofer, A., Stadler, G., Pinter, G. & Grün, F., 1 Mar 2019, In: International Journal of Fatigue. 120.2019, March, p. 294-302 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Stepped Isothermal Method And Stress Rate Accelerated Creep Rupture Tests For Efficient Creep Investigaton Of Engineering Thermoplastics

    Pilz, G., Guttmann, P., Gloggnitzer, S. & Pinter, G. G., Mar 2019.

    Research output: Contribution to conference › Paper › peer-review

  27. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten für ein PBT-Compound

    Duretek, I., 18 Feb 2019, 19 p.

    Research output: Book/Report › Commissioned report › Research

  28. Published

    Copper/Epoxy Joints in Printed Circuit Boards: Manufacturing and Interfacial Failure Mechanisms

    Nothdurft, P., Rieß, G. & Kern, W., 12 Feb 2019, In: Materials. 12.2019, 3, 18 p., 550.

    Research output: Contribution to journal › Review article › peer-review

  29. Published

    Bestimmung der Viskosität an zwei Polyvinylidenfluoriden

    Duretek, I., 6 Feb 2019, 5 p.

    Research output: Book/Report › Commissioned report › Research

  30. Published

    Crosslinked polyolefins using a modified filler

    Kaltenegger-Uray, A., Rieß, G., Lucyshyn, T., Holzer, C. & Kern, W., 6 Feb 2019, In: AIP Conference Proceedings. 2019, 2065, 5 p., 030051.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Thermal Conductivity Measurement of Industrial Rubber Compounds using Laser Flash Analysis: Applicability, Comparison and Evaluation.

    Gschwandl, M., Kerschbaumer, R. C., Schrittesser, B., Fuchs, P. F., Stieger, S. & Meinhart, L., 6 Feb 2019, In: AIP Conference Proceedings. 2065, 030041 (2019)

    Research output: Contribution to journal › Conference article › peer-review

  32. Published

    Bestimmung der Materialdaten an einem PA6

    Duretek, I., 4 Feb 2019, 20 p.

    Research output: Book/Report › Commissioned report › Research

  33. Published

    Fracture Mechanics Lifetime Prediction of Polyethylene Pipes

    Frank, A., Arbeiter, F. J., Berger, I. J., Hutar, P., Náhlík, L. & Pinter, G., 1 Feb 2019, In: Journal of Pipeline Systems Engineering and Practice. 10.2019, 1, 04018030.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Die rheologischen Stoffdatenbestimmung für zwei thermoplastischen Compounds (PPS- und PA12-Blends)

    Duretek, I., 27 Jan 2019

    Research output: Book/Report › Commissioned report › Research

  35. Published

    Simulative and experimental investigation of rapid heat cycle molding for rubbers

    Hutterer, T., Berger-Weber, G., Mager, C., Fasching, M. A., Pacher, G. A. & Friesenbichler, W., 22 Jan 2019, AIP Conference Proceedings. Vol. 2055. p. 080003-1 - 080003-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Preparation of a water-based photoreactive azosulphonate-doped poly(vinyl alcohol) and the investigation of its UV response

    Nothdurft, P., Schauberger, J. G., Riess, G. & Kern, W., 18 Jan 2019, In: Polymers. 11, 1, 169.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Minimum invasive production-related SLS specimen manufacturing for interface characterization of hybrid materials made by RTM

    Hergan, P., Lechner, C., Fauster, E., Pilz, G. & Schledjewski, R., 15 Jan 2019, In: International Journal of Advanced Manufacturing Technology. 102.2019, 5-8, p. 1963-1972 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    UV-Induced reduction of graphene oxide in cellulose nanofibril composites

    Pottathara, Y. B., Thomas, S., Kalarikkal, N., Griesser, T., Grohens, Y., Bobnar, V., Finšgar, M., Kokol, V. & Kargl, R., 14 Jan 2019, In: New Journal of Chemistry. 43.2019, 2, p. 681-688 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Fused Filament Fabrication (FFF) of Metal-Ceramic Components

    Abel, J., Scheithauer, U., Janics, T., Hampel, S., Cano Cano, S., Müller-Köhn, A., Günther, A., Kukla, C. & Moritz, T., 11 Jan 2019, In: JoVE. 2019, 143, p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Analyzing Thermal Conductivity of Polyethylene‐Based Compounds Filled with Copper

    Weingrill, H., Hohenauer, W., Resch-Fauster, K. & Zauner, C., 9 Jan 2019, In: Macromolecular materials and engineering. 304.2019, 4, 1800644.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    VERFAHREN ZUM HERSTELLEN EINES PROPHYLAXEARTIKELS

    Holzner, A. (Inventor), Kern, W. (Inventor), Manhart, J. C. (Inventor), Sahin, M. (Inventor), Schaller, R. (Inventor) & Schlögl, S. (Inventor), 9 Jan 2019, IPC No. C08J 5/ 02 A I, Patent No. EP3423514, Priority date 2 Mar 2017, Priority No. WO2017AT60052

    Research output: Patent

  42. Published

    The Effect of the Surface Area of Carbon Black Grades on HNBR in Harsh Environments

    Balasooriya, W., Schrittesser, B., Pinter, G., Schwarz, T. & Conzatti, L., 4 Jan 2019, In: Polymers. 11.2019, 1, 61.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Controlling moisture content of natural fibres in RTM-process

    Salzmann, M. & Schledjewski, R., 1 Jan 2019, 22nd Symposium on Composites. Hausmann, J. M. (ed.). Trans Tech Publications, p. 610-614 5 p. (Key Engineering Materials; vol. 809 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Data set determination for lifetime assessment of short fibre reinforced polymers

    Primetzhofer, A., Stadler, G., Pinter, G. G. & Grun, F., 1 Jan 2019, In: Zeitschrift Kunststofftechnik : Journal of plastics technology. 15.2019, 1, 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Datensatzermittlung zur lebensdauervorhersage kurzfaserverstärkter kunststoffe

    Primetzhofer, A., Stadler, G., Grün, F. & Pinter, G., 1 Jan 2019, In: Zeitschrift Kunststofftechnik/Journal of Plastics Technology. 15.2019, 1, 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Fatigue characterization of embedded layers in CFR Composites: Fatigue Design 2019, International Conference on Fatigue Design, 8th Edition

    Schneider, C., Drvoderic, M., Pinter, G., Schuecker, C. & Gaier, C., 1 Jan 2019, In: Procedia Structural Integrity. 19, p. 370-379 10 p.

    Research output: Contribution to journal › Conference article › peer-review

  47. Published

    Flash and inductive thermography for CFRP inspection

    Oswald-Tranta, B., Tuschl, C. & Schledjewski, R., 1 Jan 2019, Thermosense: Thermal Infrared Applications XLI. de Vries, J. & Oswald-Tranta, B. (eds.). SPIE, 110040L. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11004).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Incremental finite element delamination model for fibre pull-out tests of elastomer-matrix composites

    Frankl, S., Pletz, M. & Schuecker, C., 1 Jan 2019, In: Procedia Structural Integrity. 17, p. 51-57 7 p.

    Research output: Contribution to journal › Conference article › peer-review

  49. Published

    Influence of polyolefin cross-contamination on the slow crack growth resistance of polyethylene pipe grade

    Frank, A., Berger, I. J., Messiha, M. & Pinter, G., 1 Jan 2019.

    Research output: Contribution to conference › Paper › peer-review

  50. Published

    Novel approach for the lifetime prediction of composite materials under static loads

    Gloggnitzer, S., Pilz, G., Schneider, C. & Pinter, G., 1 Jan 2019, 22nd Symposium on Composites. Hausmann, J. M. (ed.). Trans Tech Publications, p. 620-624 5 p. (Key Engineering Materials; vol. 809 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Study of notch effect and fibre orientation on fatigue strength of short glass fibre reinforced polyamide

    Stadler, G., Primetzhofer, A., Pinter, G. & Grün, F., 1 Jan 2019, ECCM 2018 - 18th European Conference on Composite Materials. (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Thermal Degradation Kinetics of Polypropylene/Clay Nanocomposites Prepared by Injection Molding Compounder

    Kannan Vimalathithan, P., Barile, C., Casavola, C., Arunachalam, S., Battisti, M., Friesenbichler, W. & Vijayakumar, C. T., 1 Jan 2019, In: Polymer Composites. 2019, p. 1-10 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    A methodology for determining preform compaction in bladder-assisted resin transfer molding with elastomeric bladders for tubular composite parts

    Schillfahrt, C., Fauster, E. & Schledjewski, R., Jan 2019, In: International journal of material forming. 12.2019, 1, p. 1-15 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    3D Industrial Printing with Polymers

    Fink, J., 2019, Beverly, MA Hoboken, New Jersey. 326 p.

    Research output: Book/Report › Book › Research

  55. Published

    Abschätzung der Schaumeigenschaften durch Messung der rheologischen Materialeigenschaften und gezielte Beeinflussung der Schaummorphologie durch Anpassung der Materialformulierungen und Düsengeometrie in der Schaumextrusion

    Walluch, M., 2019

    Research output: Thesis › Doctoral Thesis

  56. Published

    Additive analysis in encapsulant materials and correlation to encapsulant degradation modes

    Barretta, C., Oreski, G. & Resch-Fauster, K., 2019.

    Research output: Contribution to conference › Poster › Research

  57. Published

    Additive manufacturing of tailored lightweight mechanical metamaterials for industrial applications

    Truszkiewicz, E., Meier, G., Vetter, M., Rossegger, M., Schlögl, S. & Fuchs, P. F., 2019, Tagungsband First European Conference on Structural Integrity of Additively Manufactured Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Aging and long-term performance of elastomers for utilization in harsh environments

    Balasooriya Arachchige, W. N., 2019

    Research output: Thesis › Doctoral Thesis

  59. Published

    An investigation on parameters influencing the properties of machine direction oriented polyethylene films

    Klobasa, J., 2019

    Research output: Thesis › Master's Thesis

  60. Published

    Anwendung von Holz-Kunststoff-Verbundwerkstoffen für die additive Fertigung

    Krainer, M., 2019

    Research output: Thesis › Master's Thesis

  61. Published

    Beschleunigte Prüfmethoden zur Charakterisierung des langfristigen Materialverhaltens kontinuierlich glasfaserverstärkter Verbundwerkstoffe unter statischer Last

    Gloggnitzer, S., 2019

    Research output: Thesis › Doctoral Thesis

  62. Published

    Biofunktionelle Kunststoffimplantate durch additive Fertigung für die kraniomaxillofaziale Chirurgie

    Katschnig, M., 2019

    Research output: Thesis › Doctoral Thesis

  63. Published

    Charakterisierung alterungsbedingter Verfärbungsmechanismen von PMMA-Compounds im Automobil-Exterieur

    Friedrichsen, L., 2019

    Research output: Thesis › Master's Thesis

  64. Published

    Comparison of the photolytic versus the hydrolytic degradation of dual-responsive polydimethylsiloxane networks

    Giebler, M., Radl, S., Ast, M., Grießer, T. & Schlögl, S., 2019.

    Research output: Contribution to conference › Poster › Research

  65. Published

    Damage and Failure in Layered Composite Structures

    Pettermann, H. E. & Schuecker, C., 2019, Altenbach H., Öchsner A. (eds) Encyclopedia of Continuum Mechanics. Springer Berlin

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer › peer-review

  66. Published

    Detection of Local Anomalies on Patterned Surfaces

    Haselmann, M., 2019

    Research output: Thesis › Doctoral Thesis

  67. Published

    Development of abrasion-resistant coatings for industrial pump systems

    Tockner, M., 2019

    Research output: Thesis › Master's Thesis

  68. Published

    Development of feedstocks for extrusion based additive manufacturing for catalytic debinding

    Hentschel, L., 2019

    Research output: Thesis › Master's Thesis

  69. Published

    Development of pressure sensitive adhesive tapes for temporary applications at high temperatures

    Bandl, C., 2019

    Research output: Thesis › Doctoral Thesis

  70. Published

    Directed motion of water droplets on multi-gradient photopolymer surfaces

    Rossegger, E., Hennen, D., Roppolo, I., Grießer, T. & Schlögl, S., 2019, In: Polymer Chemistry. 2019, 10, p. 1882 – 1893 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Directed motion of water droplets on multi-gradient photopolymer surfaces

    Rossegger, E., Hennen, D., Grießer, T., Roppolo, I. & Schlögl, S., 2019.

    Research output: Contribution to conference › Poster › Research

  72. Published

    Effect of compatibilizers on blends of immiscible polymers containing polyolefins

    Schuster, F., 2019

    Research output: Thesis › Master's Thesis

  73. Published

    Entwicklung einer modellbasierten Fertigungstechnik zur intrinsischen Herstellung von hybriden Verbundwerkstoffen

    Hergan, P., 2019

    Research output: Thesis › Doctoral Thesis

  74. Published

    Entwicklung eines FEM Modellierungsansatzes zur Beschreibung des Verformungsverhaltens von geflochtenen Kunststoffseilen

    Fimbinger, N., 2019

    Research output: Thesis › Master's Thesis

  75. Published

    Evaluation of crack initiation from pores in layered materials using a coupled stress-energy criterion

    Schuecker, C., Shevchuk, M., Drvoderic, M. & Pletz, M., 2019.

    Research output: Contribution to conference › Abstract › peer-review

  76. Published

    Evaluation of the influence of material, manufacturing and testing parameters on the leakage of PTFE and PEEK based sealing materials in reciprocating compressors

    Humpel, M., 2019

    Research output: Thesis › Master's Thesis

  77. Published

    Evaluierung mikromechanischer Methoden hinsichtlich praktischer Anwendbarkeit für faserverstärkte Kunststoffe

    Schipfer, C., 2019

    Research output: Thesis › Master's Thesis

  78. Published

    Evaluierung von Thiol-Alkin-Methacrylat-Systemen für die Additive Fertigung von keramischen Komposit-Strukturen

    Sommer, K., 2019

    Research output: Thesis › Master's Thesis

  79. Published

    Experimental and numerical investigation of special flow phenomena in powder injection molding

    Schwaiger, M., 2019

    Research output: Thesis › Master's Thesis

  80. Published

    Exploring photo-curable thiol-yne resins for the 3D printing of orthodontic clear aligners

    Schwarz, R. & Griesser, T. (Co-editor), 2019.

    Research output: Contribution to conference › Poster › Research › peer-review

  81. Published

    Fast Cross-Linking-Characterization of Waveguide-Polymers on Wafers by Imaging Low-Coherence Interferometry

    Taudt, C., Nelsen, B., Schlögl, S., Koch, E. & Hartmann, P., 2019, In: Proceedings / MDPI AG . 2.2018, 13, 1046.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Fault detection in rubber injection molding with multivariate statistics

    Hutterer, T., Berger-Weber, G. & Friesenbichler, W., 2019, In: Rubber world. 2019, December, p. 40-44 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Finite element model for predicting the initiation of subsurface damage in railway crossings—A parametric study

    Wiedorn, J., Daves, W., Ossberger, U., Ossberger, H. & Pletz, M., 2019, In: Proceedings of the Institution of Mechanical Engineers. Part F, Journal of rail and rapid transit. 2019, 6, p. Pages 614-628

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Functional Synthetic Polymers

    Fink, J., 2019, Wiley-Blackwell, USA.

    Research output: Book/Report › Book › Research

  85. Published

    Funktionalisierung polymerer Phasenwechselmaterialien

    Strommer, B., 2019

    Research output: Thesis › Master's Thesis

  86. Published

    Funtionelle hierarchische Verbundwerkstoffe für Strukturanwendungen

    Feuchter, M., 2019, In: Carbon-Composites-Magazin : die Mitgliederzeitschrift des CCeV. p. 50 1 p.

    Research output: Contribution to journal › Article › Research

  87. Published

    High-Density Polyethylene as Phase-Change Material: Long-Term Stability

    Weingrill, H., Resch-Fauster, K., Lucyshyn, T. & Zauner, C., 2019.

    Research output: Contribution to conference › Poster › Research

  88. Published

    Holistic Concept for Efficient Composite Manufacturing

    Hueber, C., 2019

    Research output: Thesis › Doctoral Thesis

  89. Published

    Impact response of sandwich panels with polyurethane and polystyrene core and composite facesheets

    Mocian, O. A., Constantinescu, D. M., Sandu, M., Sorohan, Ş., Roşu, D. & Feuchter, M., 2019, In: Materials Today: Proceedings. 12, p. 192-199 8 p.

    Research output: Contribution to journal › Conference article › peer-review

  90. Published

    Inkjet Printing: A Versatile Method for The Fabrication of Functional Patterns

    Samusjew, A., 2019

    Research output: Thesis › Doctoral Thesis

  91. Published

    Interactions between polymers and surfaces in extrusion processes

    Zitzenbacher, G., 2019

    Research output: Thesis › Habilitation thesis › peer-review

  92. Published

    Liquid Silicone Rubber

    Fink, J., 2019, Wiley-Blackwell, USA.

    Research output: Book/Report › Book › Research

  93. Published

    Mechanical Characterization of High Performance Thermal Decoupling Units for Building Envelops

    Pilz, G., Gloggnitzer, S. & Schneider, C., 2019.

    Research output: Contribution to conference › Poster › Research

  94. Published

    MECHANICAL CHARACTERIZATION OF HIGH PERFORMANCE THERMAL DECOUPLING UNITS IN BUILDING ENVELOPS

    Pilz, G., Gloggnitzer, S., Schneider, C., Pinter, G. G. & Röper, F., 2019.

    Research output: Contribution to conference › Paper › peer-review

  95. Published

    Mechanical Characterization of PMMA Produced by Fused Filament Fabrication as a Potential Material for Cranial Bone Reconstruction

    Petersmann, S., Spörk, M., Lang, M. C., Moser, C., Pinter, G. G. & Arbeiter, F., 2019, Abstract Book of the First European Conference on Structural Integrity of Additively Manufactured Materials. 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Methods for automated crack length detection in fracture mechanical fatigue tests of unreinforced polymers

    Geier, J., 2019

    Research output: Thesis › Master's Thesis

  97. Published

    Model Based Processing of Hybrid RTM Parts

    Hergan, P., Fauster, E. & Schledjewski, R., 2019.

    Research output: Contribution to conference › Paper › peer-review

  98. Published

    Oberflächenfunktionalisiertes Talkum zur Optimierung der Vernetzungsstruktur und der Schaummorphologie von Polyethylen

    Kaltenegger-Uray, A., 2019

    Research output: Thesis › Doctoral Thesis

  99. Published

    On the formulation and numerical implementation of anisotropic elasto-plasticity with application to fibre-reinforced composites

    Gaddikere Nagaraja, S., 2019

    Research output: Thesis › Doctoral Thesis

  100. Published

    On the formulation of anisotropic plasticity for polymeric composites - rate-dependent models with non-linear isotropic/kinematic hardening.

    Gaddikere Nagaraja, S. & Schuecker, C., 2019, Proceedings in Applied Mathematics and Mechanics 2019.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Polyethylene Nanocomposites for Power Cable Insulations

    Plesa, G.-I., Schlögl, S., Noţingher, P., Stancu, C. & Wiesbrock, F., 2019, In: Polymers. 11.2019, 1

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...7 8 9 10 11 12 13 14 ...42 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301