Analyzing Thermal Conductivity of Polyethylene‐Based Compounds Filled with Copper

Research output: Contribution to journalArticleResearchpeer-review

Authors

External Organisational units

  • Austrian Institute of Technology GmbH (AIT), Vienna, Austria

Abstract

The thermal conductivity (TC) of different polymeric materials is measured via four commercially available testing devices: TPS2500S by Hot Disk (Hot Disk), Transient Hot Bridge (THB) by Linseis, the Laser Flash Analysis (LFA) by NETZSCH, and the DTC‐300 by TA Instruments. The investigated materials include high‐density polyethylene (HDPE) and linear low‐density polyethylene (LLDPE) which are analyzed as received and after being compounded with copper particles. The filler geometry and ratio are varied systematically. Major differences in the TC generated by the different measurement methods are revealed and analyzed in detail. Moreover, material‐induced impacts on the TC as well as technology‐induced impacts on the TC are outlined comprehensively.

Details

Original languageEnglish
Article number1800644
JournalMacromolecular materials and engineering
Volume304.2019
Issue number4
DOIs
Publication statusPublished - 9 Jan 2019