Analyzing Thermal Conductivity of Polyethylene‐Based Compounds Filled with Copper
Research output: Contribution to journal › Article › Research › peer-review
Standard
In: Macromolecular materials and engineering, Vol. 304.2019, No. 4, 1800644, 09.01.2019.
Research output: Contribution to journal › Article › Research › peer-review
Harvard
APA
Vancouver
Author
Bibtex - Download
}
RIS (suitable for import to EndNote) - Download
TY - JOUR
T1 - Analyzing Thermal Conductivity of Polyethylene‐Based Compounds Filled with Copper
AU - Weingrill, Helena
AU - Hohenauer, Wolfgang
AU - Resch-Fauster, Katharina
AU - Zauner, Christoph
PY - 2019/1/9
Y1 - 2019/1/9
N2 - The thermal conductivity (TC) of different polymeric materials is measured via four commercially available testing devices: TPS2500S by Hot Disk (Hot Disk), Transient Hot Bridge (THB) by Linseis, the Laser Flash Analysis (LFA) by NETZSCH, and the DTC‐300 by TA Instruments. The investigated materials include high‐density polyethylene (HDPE) and linear low‐density polyethylene (LLDPE) which are analyzed as received and after being compounded with copper particles. The filler geometry and ratio are varied systematically. Major differences in the TC generated by the different measurement methods are revealed and analyzed in detail. Moreover, material‐induced impacts on the TC as well as technology‐induced impacts on the TC are outlined comprehensively.
AB - The thermal conductivity (TC) of different polymeric materials is measured via four commercially available testing devices: TPS2500S by Hot Disk (Hot Disk), Transient Hot Bridge (THB) by Linseis, the Laser Flash Analysis (LFA) by NETZSCH, and the DTC‐300 by TA Instruments. The investigated materials include high‐density polyethylene (HDPE) and linear low‐density polyethylene (LLDPE) which are analyzed as received and after being compounded with copper particles. The filler geometry and ratio are varied systematically. Major differences in the TC generated by the different measurement methods are revealed and analyzed in detail. Moreover, material‐induced impacts on the TC as well as technology‐induced impacts on the TC are outlined comprehensively.
UR - http://www.scopus.com/inward/record.url?scp=85059660616&partnerID=8YFLogxK
U2 - 10.1002/mame.201800644
DO - 10.1002/mame.201800644
M3 - Article
VL - 304.2019
JO - Macromolecular materials and engineering
JF - Macromolecular materials and engineering
SN - 1438-7492
IS - 4
M1 - 1800644
ER -
