Department Physics, Mechanics and Electrical Engineering

Organisational unit: Departments and Institutes

351 - 400 out of 2,058Page size: 50

Research output

  1. 2019
  2. Published

    Wear of dry-running piston rod sealing rings: modelling and experiments

    Kaufmann, A., 2019

    Research output: Thesis › Doctoral Thesis

  3. 2018
  4. Published

    Crack arrest in thin metallic film stacks due to material- and residual stress inhomogeneities

    Kozic, D., Gänser, H.-P., Brunner, R., Kiener, D., Antretter, T. & Kolednik, O., 31 Dec 2018, In: Thin solid films. p. 14-22 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Growth morphologies and thermalization pathways of nitrogen based oligoacene derivatives on (0001) sapphire

    Cicek, A., Matkovic, A., Kratzer, M. & Teichert, C., 18 Dec 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  6. Published

    Salt concentration and charging velocity determine ion charge storage mechanism in nanoporous supercapacitors

    Prehal, C., Koczwara, C., Amenitsch, H., Presser, V. & Paris, O., 1 Dec 2018, In: Nature Communications. 9, 1, 4145.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Uniaxially Oriented Semi-Crystalline PET Films and their Deformation Depending on Tensile Direction

    Fritz-Popovski, G., Feuchter, M. & Maier, G., 11 Oct 2018.

    Research output: Contribution to conference › Poster › Research

  8. Published

    Combining In Situ SAXS and Atomistic Simulations to Study Ion Charge Storage in Nanoporous Carbon Electrodes

    Koczwara, C., Prehal, C., Jäckel, N., Amenitsch, H., Freunberger , S. A., Presser, V. & Paris, O., 9 Oct 2018.

    Research output: Contribution to conference › Poster › Research

  9. Published

    Salt concentration and charging velocity determine ion charge storage mechanism in nanoporous supercapacitors: The original version of this Article contained an error in the Acknowledgements, which was incorrectly omitted from the end of the following: ‘The research leading to these results has received funding from the European Community’s Horizon 2020 Framework Programme under grant agreement nº 730872.’ This has been corrected in both the PDF and HTML versions of the Article.

    Prehal, C., Koczwara, C., Amenitsch, H., Presser, V. & Paris, O., 8 Oct 2018, In: Nature Communications. 9.2018, 1, 256.

    Research output: Contribution to journal › Comment/debate › peer-review

  10. Published

    Kinetics of interaction of impurity interstitials with dislocations revisited

    Svoboda, J., Ecker, W., Razumovskiy, V. I., Zickler, G. A. & Fischer, F.-D., Oct 2018, In: Progress in materials science. 101.2019, April, p. 172-206 35 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    The effect of loading during martensitic transformation of a maraging steel after prior austenite grain size refinement by thermal cycling

    Petersmann, M., Antretter, T. & Sannikov, A., 19 Sept 2018, Sonderbände der Praktischen Metallographie Band 52. p. 207-212 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Sucker Rod String Design Optimization Using an Innovative Finite Element Simulation Approach

    Langbauer, C., Antretter, T. & Hofstätter, H., 1 Sept 2018, In: Oil gas European magazine. 44.2018, III, p. 126-132 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Recent developments in surface science and engineering, thin films, nanoscience, biomaterials, plasma science, and vacuum technology

    Mozetic, M., Vesel, A., Primc, G., Eisenmenger-Sittner, C., Bauer, J., Eder, A., Schmid, G. H. S., Ruzic, D. N., Ahmed, Z., Barker, D., Douglass, K. O., Eckel, S., Fedchak, J. A., Hendricks, J., Klimov, N., Ricker, J., Scherschligt, J., Stone, J., Strouse, G. & Capan, I. & 31 others, Buljan, M., Milosevic, S., Teichert, C., Cohen, S. R., Silva, A. G., Lehocky, M., Humpolicek, P., Rodriguez, C., Hernandez-Montelongo, J., Mercier, D., Manso-Silvan, M., Ceccone, G., Galtayries, A., Stana-Kleinschek, K., Petrov, I., Greene, J. E., Avila, J., Chen, C. Y., Caja-Munoz, B., Yi, H., Boury, A., Lorcy, S., Asensio, M. C., Bredin, J., Gans, T., O'Connell, D., Brendin, J., Reniers, F., Vincze, A., Anderle, M. & Montelius, L., 30 Aug 2018, In: Thin solid films. 660, p. 120-160

    Research output: Contribution to journal › Review article › peer-review

  14. Published

    A Shape-Induced Orientation Phase within 3D Nanocrystal Solids

    Burian, M., Karner, C., Yarema, M., Heiss, W., Amenitsch, H., Dellago, C. & Lechner, R. T., 9 Aug 2018, In: Advanced materials. 30.2018, 32

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Effect of the Polymer Chain Arrangement on Exciton and Polaron Dynamics in P3HT and P3HT:PCBM Films

    Dimitriev, O. P., Blank, D. A., Ganser, C. & Teichert, C., 2 Aug 2018, In: Journal of physical chemistry C (C, Nanomaterials and interfaces). 122, 30, p. 17096-17109

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Colloidal Bismuth Nanocrystals as a Model Anode Material for Rechargeable Mg-Ion Batteries: Atomistic and Mesoscale Insights

    Kravchyk, K. V., Piveteau, L., Caputo, R., He, M., Stadie, N. P., Bodnarchuk, M. I., Lechner, R. T. & Kovalenko, M. V., Aug 2018, In: ACS nano. 12.2018, 8, p. 8297-8307

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    CdS Nanosize Single Crystals Growth and Morphology, Piezoelectric Properties and Prospects for Piezotronics

    Grynko, D. O., Bortchagovsky, E., Doroshenko, T., Rachkov, A., Styopkin, V., Hesser, G., Kratzer, M. & Teichert, C., 18 Jul 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    3D Printing of Hierarchical Porous Silica and alpha-Quartz

    Putz, F., Scherer, S., Ober, M., Morak, R., Paris, O. & Huesing, N., Jul 2018, In: Advanced Materials Technologies. 3, 7, p. 1800060-1 - 1800060-5 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Fabrication of ion bombardment induced rippled TiO2 surfaces to influence subsequent organic thin film growth

    Kratzer, M., Szajna, K., Wrana, D., Belza, W., Krok, F. & Teichert, C., 18 Jun 2018, In: Journal of Physics Condensed Matter. 30, 28, 283001.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Molecules on rails: friction anisotropy and preferential sliding directions of organic nanocrystallites on two-dimensional materials

    Vasić, B., Stankovic, I., Matkovic, A., Ganser, C., Kratzer, M., Gajic, R. & Teichert, C., 14 Jun 2018, In: Nanoscale. 2018, 10, p. 18835 18845 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Modelling blast fragmentation of cylinders of mortar and rock

    Iravani, A., Kukolj, I., Ouchterlony, F., Antretter, T. & Åström, J., Jun 2018, Fragblast 12: 12th International Symposium on Rock Fragmentation by Blasting. Schunnesson, H. & Johansson, D. (eds.). Luleå: Luleå Univ. of Technology, p. 597-610 15 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Simulation von EUV-Spiegeln

    Meisels, R., 17 May 2018.

    Research output: Contribution to conference › Poster › Transfer

  23. Published

    Sucker Rod String Design Optimization using an Innovative Finite Elements Simulation Approach

    Langbauer, C., Hofstätter, H. & Antretter, T., 24 Apr 2018, NAFEMS Nordic Tagungsband 2018. p. 71-73

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Sucker Rod String Design Optimization using an Innovative Finite Elements Simulation Approach

    Langbauer, C., Hofstätter, H. & Antretter, T., 19 Apr 2018, DGMK Tagungsbericht 2018. p. 227 237 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Frequency elastic drive system operation of sucker rod pumping system

    Langbauer, C. & Winkler, T., 18 Apr 2018, Proceedings - 2018 17th International Ural Conference on AC Electric Drives, ACED 2018. Institute of Electrical and Electronics Engineers, Vol. 2018-April. p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Industrial application of a linear drive system in a pump testing facility

    Langbauer, C. & Kaserer, G., 18 Apr 2018, Proceedings - 2018 17th International Ural Conference on AC Electric Drives, ACED 2018. Institute of Electrical and Electronics Engineers, Vol. 2018-April. p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Three phase flux switching machine with hybrid excitation - Design and implementation

    Krenn, J. & Weiss, H., 18 Apr 2018, Proceedings - 2018 17th International Ural Conference on AC Electric Drives, ACED 2018. Institute of Electrical and Electronics Engineers, Vol. 2018-April. p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Comment on “Experimental Evidence for Sign Reversal of the Hall Coefficient in Three-Dimensional Metamaterials”

    Oswald, J., 5 Apr 2018, In: Physical review letters. 120, 14, p. 149701 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Stress–strain analysis of the antiplane shear problem for an infinite cylindrical inclusion with eigenstrain: an addendum to Arch. Appl. Mech. 2018

    Fischer, F.-D., Zickler, G. A. & Svoboda, J., 2 Apr 2018, In: Archive of applied mechanics. 88.2018, 7, p. 1209-1211 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Influence of accounting for translational motion of grains on grain growth kinetics and size distribution

    Svoboda, J. & Fischer, F.-D., 15 Mar 2018, In: Scripta Materialia. 146.2018, 15 March, p. 255-259 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    A new device for high-temperature in situ GISAXS measurements

    Fritz-Popovski, G., Bodner, S. C., Sosada-Ludwikowska, F., Maier, G. A., Morak, R., Chitu, L., Bruegemann, L., Lange, J., Krane, H. G. & Paris, O., 5 Mar 2018, In: Review of scientific instruments. 89.2018, 3, 035103.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Controllable formation of nanoscale molecular structures on rutileTiO2(110): From highly anisotropic nanoneedles to dendritic islands

    Wrana, D., Szajna, K., Kratzer, M., Belza, W., Jany, B. R., Teichert, C. & Krok, F., 25 Feb 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Growth of ultra-thin para-hexaphenyl layers on atomically-flat TiO2(110) surfaces

    Belza, W., Szajna, K., Wrana, D., Kratzer, M., Teichert, C. & Krok, F., 25 Feb 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  34. Published

    Low temperature heat capacities and thermodynamic functions described by Debye–Einstein integrals

    Gamsjäger, E. & Wießner, M., 25 Jan 2018, In: Monatshefte für Chemie = Chemical monthly. 149, p. 357-368 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Reconstruction of the domain orientation distribution function of polycrystalline PZT ceramics using vector piezoresponse force microscopy

    Kratzer, M., Lasnik, M., Röhrig, S., Teichert, C. & Deluca, M., 11 Jan 2018, In: Scientific reports (London : Nature Publishing Group). 8

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Enhanced terahertz response of diluted magnetic semiconductor Zn1-xMnxTe crystals

    Dong, J., Xu, Y., Ji, L. L., Xiao, B., Zhang, B. B., Guo, L., Zhang, C., Teichert, C. & Jie, W., 1 Jan 2018, In: Optical Materials Express. 8, 1, p. 157-164 309070.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Photonic superlattice multilayers for EUV lithography infrastructure

    Kuchar, F. & Meisels, R., 1 Jan 2018, 34th European Mask and Lithography Conference. SPIE, Vol. 10775. 1077503

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Reaction of different rock types to low-power (3.2 kW) microwave irradiation in a multimode cavity

    Hartlieb, P., Kuchar, F., Moser, P., Kargl, H. & Restner, U., Jan 2018, In: Minerals engineering. 118

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Activated Carbon Cloth: a versatile material for energy storage applications

    Koczwara, C., Prehal, C. & Paris, O., 2018

    Research output: Other contribution › Research

  40. Published

    An innovative concept for interstitial diffusion in stressed crystals

    Svoboda, J., Zickler, G. A. & Fischer, F.-D., 2018, In: International journal of solids and structures. p. 173-180

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    An In-Situ LSCM Study on Bainite Formation in a Fe-0.2C-1.5Mn-2.0Cr Alloy

    Sainis, S., Farahani, H., Gamsjäger, E. & van der Zwaag, S., 2018, In: Metals : open access journal . 8, 498, p. 1-22 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Anisotropy of Interstitial Diffusion in bcc-crystals due to Stress-Induced Unequal Occupancies of Different Types of Sites

    Svoboda, J. & Fischer, F.-D., 2018, In: International journal of solids and structures. 152-153, p. 66-70

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Carbons with hierarchical porosity: structural and electrochemical characterisation & electrosorption induced swelling

    Koczwara, C., Prehal, C. & Paris, O., 2018

    Research output: Other contribution › Research

  44. Published

    Combining adhesive contact mechanics with a viscoelastic material model to probe local material properties by AFM

    Ganser, C., Czibula, C., Tscharnuter, D., Schöberl, T., Teichert, C. & Hirn, U., 2018, In: Soft Matter. 14, 1, p. 140-150 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Crystallography-microstructure-relations of hierarchical lath martensite from a micromechanical point of view

    Petersmann, M., 2018

    Research output: Thesis › Doctoral Thesis

  46. Published

    Deep drawing of press hardening steels

    Tomasch, M., Ecker, W., Kaiser, R. & Antretter, T., 2018, Journal of Physics: Conference Series. IOP Publishing Ltd., Vol. 1063. 012038

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Designing nanoindentation simulation studies by appropriate indenter choices: Case study on single crystal tungsten

    Goel, S., Cross, G., Stukowski, A., Gamsjäger, E., Beake, B. & Agrawal, A., 2018, In: Computational materials science. 152, p. 196-210 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Development of an automated preprocessor for the micromechanical modeling of foundry sands

    Ralph, B., 2018

    Research output: Thesis › Master's Thesis

  49. Published

    Elastic stress-strain analysis of an infinite cylindrical inclusion with eigenstrain

    Fischer, F.-D., Zickler, G. & Svoboda, J., 2018, In: Archive of applied mechanics. 88, p. 453-460

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Elektrolok mit 2000 kg Re-Use-Lithium- Ionen-Batterien – Realisierung, Erfahrungen, Weiterarbeit

    Winkler, T. & Weiß, H., 2018, p. 161-166. 6 p.

    Research output: Contribution to conference › Poster › Research

  51. Published

    Evaluation of Digital Image Correlation Techniques for the Determination of Coefficients of Thermal Expansion for Thin Reinforced Polymers

    Gschwandl, M., Frewein, M., Fuchs, P. F., Antretter, T., Pinter, G. G. & Novàk, P., 2018.

    Research output: Contribution to conference › Poster › Research

  52. Published

    Evaluation of Digital Image Correlation Techniques for the Determination of Coefficients of Thermal Expansion for Thin Reinforced Polymers

    Gschwandl, M., Frewein, M., Fuchs, P. F., Antretter, T., Pinter, G. G. & Novàk, P., 2018, EMAP 2018 Conference Proceedings. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...4 5 6 7 8 9 10 11 ...42 Next
View graph of relations