Department Mineral Resources Engineering

Organisational unit: Departments and Institutes

401 - 500 out of 3,520Page size: 100

Research output

  1. 2022
  2. Published

    Eight Become One: the EURECA-PRO University Network

    Kircher, V., Feiel, S., Bongaerts, J. C., Sishchuk, J., Drebenstedt, C., Lagoudakis, M., Fragkedaki, K., García-Llamas, P., Suárez-Corona, A., Fernández-Raga, M., Baelo-Álvarez, R., Górski, M., Pawełczyk, M., Hochstein, S., Walter, S., Speck, M., Ravas, O., Van Hellemont, E. & Vancauwenbergh, S., 4 Oct 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167:2022, 10, p. 462-471 10 p.

    Research output: Contribution to journal › Article › Transfer › peer-review

  3. Published

    Potentials and limitations of using artificial intelligence to predict grouting parameters – Results of a case study in a tunnel project in Scandinavia

    Thienert, C., Ouschan, M., Wenighofer, R., Könemann, F., Klaproth, C., Gabriel, P., Villeneuve, M. C. & Pechhacker, R., 4 Oct 2022, In: Geomechanics and tunnelling = Geomechanik und Tunnelbau. 15.2022, 5, p. 525-534 10 p.

    Research output: Contribution to journal › Article › Transfer

  4. Published

    Der Aufbereiter Die Aufbereiterin 2022

    Hartig, G., Böhm, A., Prem, D., Marousek, L., Krukenfellner, P., Öfner, W., Zeismann, B., Fimbinger, E., Pölzl, C. & Flachberger, H., 3 Oct 2022, Der Aufbereiter Die Aufbereiterin 2022.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Partikelbruch in der Fördertechnik: Prüfmethodik und Simulation mittels Diskrete Elemente-Methode

    Denzel, M., Oct 2022, In: Bergbau : Zeitschrift für Rohstoffgewinnung, Energie, Umwelt. 73.2022, 10, p. 436-440 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. E-pub ahead of print

    Multi-Response Optimization of the Thermal and Thermomechanical Behavior of a Steel Ladle Lining using Grey Relational Analysis and Technique for Order Preference by Similarity to Ideal Solution

    Hou, A., Gruber, D. & Jin, S., 23 Sept 2022, (E-pub ahead of print) In: Steel research international. 94.2023, 1, 10 p., 2200407.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    A pantropical assessment of deforestation caused by industrial mining

    Giljum, S., Maus, V., Kuschnig, N., Luckeneder, S., Tost, M., Sonter, L. & Bebbington, A., 20 Sept 2022, In: Proceedings of the National Academy of Sciences of the United States of America (PNAS). 19.2022, 38, 17 p., e2118273119.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Evaluation of improvements in the separation of monolayer and multilayer films via measurements in transflection and application of machine learning approaches

    Koinig, G., Kuhn, N., Barretta, C., Friedrich, K. & Vollprecht, D., 20 Sept 2022, In: Polymers. 14.2022, 19, 28 p., 3926.

    Research output: Contribution to journal › Article › Research › peer-review

  9. E-pub ahead of print

    Exploring frame conflicts in the development of a new mineral resource policy in Austria using Q-methodology

    Kügerl, M.-T., Endl, A., Tost, M., Ammerer, G., Hartlieb, P. & Gugerell, K., 17 Sept 2022, (E-pub ahead of print) In: Ambio. 2023, 1, p. 210-228 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Addressing Energy Efficiency in Quarries – First Stage in the Development of a Holistic Approach

    Sanchez, F. & Hartlieb, P., 14 Sept 2022, p. 21-23. 3 p.

    Research output: Contribution to conference › Abstract › peer-review

  11. Published

    Influence of the Fine Fraction and Sintering on Selected Isotropic and Anisotropic Bulk Properties of Uniaxial Compacts

    Fruhstorfer, J., Wagner, M., Gruber, D. & Harmuth, H., 14 Sept 2022, In: Interceram. 71.2022, September, p. 38-47 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. E-pub ahead of print

    Effect of microporous aggregates and spinel powder on fracture behavior of magnesia-based refractories

    Yan, J., Dai, Y., Yan, W., Jin, S., Wang, X. & Li, Y., 13 Sept 2022, (E-pub ahead of print) In: Journal of the European Ceramic Society. 42.2022, 16, p. 7648-7655 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    The (R)Evolution of European Education Policy: European Higher Education Alliances

    Moser, P., Feiel, S. & Kircher, V., 12 Sept 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 10, p. 457-461 5 p.

    Research output: Contribution to journal › Article › Transfer › peer-review

  14. Published

    Die Sideritlagerstätte des Steirischen Erzberges

    Melcher, F., Pluch, H. & Galler, R., 10 Sept 2022, PANGEO Austria 2022 Abstracts and Field guides. p. 211-224 (Berichte der Geologischen Budesanstalt (Berichte der GBA)).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  15. Published

    Sekundärminerale in Pb-Zn-Lagerstätten und Ermittlung der Elementgehalte am Beispiel der Halden in Bleiberg, Kärnten

    Dollinger, S., Melcher, F., Marousek, L., Elmer, S. & Nußbacher, H., 10 Sept 2022, PANGEO Austria 2022 Abstracts and Field guides. p. 37 (Berichte der Geologischen Bundeanstalt (Berichte der GBA)).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  16. Published

    Sustainable Consumption and Production in the Extraction and Processing of Raw Materials—Measures Sets for Achieving SDG Target 12.2

    Trummer, P., Ammerer, G. & Scherz, M., 2 Sept 2022, In: Sustainability. 14.2022, 17, 18 p., 10971.

    Research output: Contribution to journal › Article › Transfer › peer-review

  17. Published

    Lifecycle Assessment for Recycling Processes of Monolayer and Multilayer Films: A Comparison

    Koinig, G., Grath, E., Barretta, C., Friedrich, K., Vollprecht, D. & Oreski, G., 1 Sept 2022, In: Polymers. 14.2022, 17, 35 p., 3620.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    A probabilistic particle replacement model to simulate bulk material degradation during conveying processes using DEM

    Denzel, M., Prenner, M. & Sifferlinger, N. A., Sept 2022, Proceedings of the XXIV International Conference MHCL 2022: International Conference on Materal Handling, Constructions and Logistics. Zrnić, N., Kartnig, G. & Bošnjak, S. (eds.). Belgrade, Serbia: Faculty of Mechanical Engineering, Belgrade University, p. 29-36 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. E-pub ahead of print

    Zirconium oxycarbides and oxycarbonitrides: A review

    Kucheryavaya, A., Lenčéš, Z., Šajgalík, P. & Harmuth, H., 30 Aug 2022, (E-pub ahead of print) In: International journal of applied ceramic technology. 20.2023, 2, p. 541-562 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. E-pub ahead of print

    Sherwood correlation for finger-test experiments

    Guarco, J., Burhanuddin, Vollmann, S. & Harmuth, H., 27 Aug 2022, (E-pub ahead of print) In: Results in Engineering. 15.2022, September, 5 p., 100610.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    The Bulk and the Properties of Interest

    Friedrich, K. & Feucht, F., 19 Aug 2022

    Research output: Other contribution › Research

  22. Published

    Image-processing-based automatic crack detection and classification for refractory evaluation

    Wang, G., Tan, F., Jin, S., Pan, L., He, Z., Wang, X., Li, Y. & Li, J., 15 Aug 2022, In: Ceramics International. 48.2022, 16, p. 23232-23240 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Creep characterization and modelling of ordinary refractory ceramics under combined compression and shear loading conditions

    Schachner, S., Jin, S., Gruber, D. & Harmuth, H., 1 Aug 2022, In: Ceramics International. 48.2022, 15, p. 21101-21109 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Containerbasierte Pilot-Rührwerkskugelmühle

    Zeismann, B. & Böhm, A., Aug 2022, In: Stein & Kies (Mitgliederzeitung - Forum mineralische Rohstoffe). 2022, 179, 7-8, p. 11 1 p.

    Research output: Contribution to journal › Article › Research

  25. Published

    Hydrothermally induced edifice destabilisation: The mechanical behaviour of rock mass surrounding a shallow intrusion in andesitic lavas, Pinnacle Ridge, Ruapehu, New Zealand

    Mordensky, S. P., Villeneuve, M., Kennedy, B. M. & Struthers, J. D., Aug 2022, In: Engineering Geology. 305.2022, August, 19 p., 106696.

    Research output: Contribution to journal › Article › Research › peer-review

  26. E-pub ahead of print

    Datenbasierte Modellierung einer nass betriebenen Rührwerkskugelmühle: Vorstellung des Dissertationsprojektes

    Zeismann, B., 29 Jul 2022, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 8, p. 390-392 3 p.

    Research output: Contribution to journal › Article › Research

  27. Published

    Formsteine – Eine technische Lösung, um kupferhaltige Rest- und Kreislaufstoffe ofengängig zu machen

    Marousek, L., Böhm, A., Tripolt, T. & Pesl, J., 29 Jul 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 8, p. 361-367 7 p.

    Research output: Contribution to journal › Article › Research

  28. E-pub ahead of print

    Implementierung eines mehrkörperdynamischen Systems an der Prallschwinge eines Prallbrechers zu dessen Berücksichtigung in der DEM-Simulation

    Fimbinger, E. & Kemper, D., 29 Jul 2022, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 8, p. 368-380 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    EMJM PROMISE—The New International Erasmus Mundus Joint Master in Sustainable Mineral and Metal Processing Engineering

    Öfner, W., Sinche-Gonzalez, M., Flachberger, H., Bedeković, G., Acuña, C. & Guerra, P., 27 Jul 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 8, p. 355-360 6 p.

    Research output: Contribution to journal › Article › Transfer

  30. Published

    Mixed-mode fracture behaviour of refractories with asymmetric wedge splitting test: Part II: Experimental case study

    Dai, Y. J., Jin, S., Zhou, R., Li, Y. W., Harmuth, H. & Tschegg, E. K., 15 Jul 2022, In: Ceramics International. 48.2022, 14, p. 19757-19766 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Mixed-mode fracture behaviour of refractories with asymmetric wedge splitting test: Part I: Numerical implementation and validation

    Dai, Y., Jin, S., Li, Y. W., Wang, Q., Zhou, W. & Harmuth, H., 15 Jul 2022, In: Ceramics International. 48.2022, 14, p. 19767-19775 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Simulation of complex-shaped particle breakage using the Discrete Element Method

    Platzer, F. & Fimbinger, E., 12 Jul 2022, irc 2022: XVI. international research conference proceedings. Stockholm, Sweden, p. 4-10 7 p. (WASET).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Simulation of Complex-Shaped Particle Breakage with a Bonded Particle Model Using the Discrete Element Method

    Platzer, F. & Fimbinger, E., 12 Jul 2022, In: International Journal of Chemical and Molecular Engineering. 2022, Vol:16, No:07

    Research output: Contribution to journal › Conference article › peer-review

  34. E-pub ahead of print

    Improving Tapping Experience — and Why to Choose a Comprehensive Approach

    Gregurek, D., Wenzl, C., Unterreiter, G., Vukovic, G. & Marschall, H. U., 8 Jul 2022, (E-pub ahead of print) In: JOM. 74.2022, 11, p. 3999–4008 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Solid state material driven turbine to reduce segregation effects in bunkers

    Denzel, M. & Prenner, M., 8 Jul 2022, 10th International Conference on Conveying and Handling of Particulate Solids.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Engineering Education 5.0: Model Curriculum for a Postgraduate Master on Circular Economy

    Woschank, M., Murphy, M. & Pacher, C., 6 Jul 2022, Proceedings of the 5th European International Conference on Industrial Engineering and Operations Management (IEOM), July 26-28, 2022, Rome, Italy. p. 1949–1959

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Corrigendum to “Asymmetric creep modeling of common refractory ceramics with high temperature wedge splitting test” [Eng. Fract. Mech. 25 (2021) 107819

    Jin, S. & Harmuth, H., Jul 2022, 1 p.

    Research output: Other contribution › Research

  38. Published

    Mobile Stoppings in Complex Subsurface Operations

    Hofer, P., Nöger, M. & Eder, M., Jul 2022. 6 p.

    Research output: Contribution to conference › Paper

  39. Published

    RasPos: Subsurface People Detection and Localization using Wi-Fi Probe Requests

    Evangelatos, A. & Wenighofer, R., Jul 2022. 6 p.

    Research output: Contribution to conference › Paper

  40. Published

    Small-scale models and tests at the “Zentrum am Berg”

    Schmidbauer, J., Heilinger, P., Hofmann, C. & Speckmoser, V., Jul 2022. 6 p.

    Research output: Contribution to conference › Paper

  41. Published

    Machbarkeitsstudie zu Transportsysteme für Kurz-Mittel-und Langdistanzen - Hoher Automatisierungsgrad

    Prenner, M., Gschwandtner, C. & Hack, P., 23 Jun 2022

    Research output: Book/Report › Commissioned report › Research

  42. Published

    Contributions to Crack Propagation in Coarse Grained Refractories

    Gruber, D. & Harmuth, H., 22 Jun 2022.

    Research output: Contribution to conference › Presentation › Research

  43. Published

    Effect of Confinement on Detonation Velocity and Plate Dent Test Results for ANFO Explosive

    Bohanek, V., Sućeska, M., Dobrilović, M. & Hartlieb, P., 16 Jun 2022, In: Energies : open-access journal of related scientific research, technology development and studies in policy and management. 15.2022, 12, 9 p., 4404.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Discrete element modelling of ordinary refractory ceramics under cold crushing testing: Influence of minimum element size

    Du, W., Jin, S., Emam, S., Gruber, D. & Harmuth, H., 15 Jun 2022, In: Ceramics International. 48.2022, 12, p. 17934-17941 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Evaluation of CLSM measurements for dissolution studies: A case study investigating alumina dissolution in a silicate slag

    Harmuth, H. & Burhanuddin, B., 14 Jun 2022, In: Ceramics International. 48.2022, 19 Part A, p. 28174-28180 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Pangea: An MLOps Tool for Automatically Generating Infrastructure and Deploying Analytic Pipelines in Edge, Fog and Cloud Layers

    Minon, R., Diaz-de-Arcayas, J., Torre-Bastidas, A. & Hartlieb, P., 11 Jun 2022, In: Sensors. 22.2022, 12, 29 p., 4425.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Adaptive and parameterised 3D BIM model for the tunnel tender and excavation phase

    Wenighofer, R., Eder, N., Speckmoser, V., Villeneuve, M., Winkler, L. & Galler, R., 3 Jun 2022, In: Geomechanics and tunnelling = Geomechanik und Tunnelbau. 15.2022, 3, p. 272-278 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    The Tunneling Information Management System: A tool for documenting the tunneling process in NATM projects

    Huymajer, M., Operta, D., Mazak-Huemer, A. & Huemer, C., 3 Jun 2022, In: Geomechanics and tunnelling = Geomechanik und Tunnelbau. 15.2022, 3, p. 259-264 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Physical and Mechanical characteristic relationships of Late-Cretaceous to Eocene reservoir rocks in the Maui, Maari and Manaia Fields, New Zealand

    Hill, S., Villeneuve, M. C. & McNamara, D., Jun 2022, In: Journal of Petroleum Science and Engineering. 213.2022, June, 16 p., 110375.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Geological potential of antimony, bauxite, fluorite, and magnesite of the Central Dinarides (Bosnia and Herzegovina): exploration and exploitation perspective

    Borojević Šoštarić, S., Markelj, A., Jašarević, E. & Haindl, A., 26 May 2022, In: Geologia Croatica. 75.2022, 2, p. 269–287 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    The Role of Pillars in Raise Caving

    Gams, P. & Ladinig, T., 18 May 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 6, p. 278-285 8 p.

    Research output: Contribution to journal › Article › Research

  52. Published

    Melting Rate Determination of Mold Powders: Continuous Casting Process Versus Laboratory Conditions

    Kölbl, N., 17 May 2022, In: Frontiers in Materials. 9.2022, May, 8 p., 881168.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    CARRIER ROLLER WITH SENSOR FOR SENSING SIGNALS BEING CHARACTERISTIC FOR TEMPERATURE AND STRAIN AT A ROLLER SHAFT

    Moser, P. (Inventor), Kern, W. (Inventor), Grießer, T. (Inventor) & Feiel, S. (Inventor), 11 May 2022, IPC No. G01B 7/ 16 A N, Patent No. EP3995418, Priority date 9 Nov 2020, Priority No. EP20200206481

    Research output: Patent

  54. Published

    Fracture energy determination of carbon containing refractories with consideration of the creep behaviour

    Gruber, D., 6 May 2022.

    Research output: Contribution to conference › Presentation › Research

  55. Published

    ROCK ANCHOR WITH SENSOR FOR MEASURING A MECHANICAL TENSION

    Feiel, S. (Inventor), Kern, W. (Inventor), Griesser, T. (Inventor) & Moser, P. (Inventor), 5 May 2022, IPC No. F16B 31/ 02 A I, Patent No. US2022136389, Priority date 6 Feb 2020, Priority No. WO2020EP53028

    Research output: Patent

  56. Published

    Method for determination of mass transfer coefficients for dissolution of dense ceramics in liquid slags

    Guarco, J., Harmuth, H. & Vollmann, S., 1 May 2022, In: International journal of heat and mass transfer. 186.2022, 1 May, 11 p., 122494.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Die vielfältigen Verwendungsmöglichkeiten von Kohlenstoff aus der Pyrolyse von Methan

    Obenaus-Emler, R., May 2022, Pyrolyse: Potenziale und Anwendungsmöglichkeiten einer klimaschonenden Wasserstofferzeugung. DVGW Deutscher Verein des Gas- und Wasserfaches e.V. (ed.). p. 16-17

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  58. Published

    Partikelbruch in der Fördertechnik – Prüfmethodik und Simulation mittels Diskrete Elemente Methode

    Denzel, M., 27 Apr 2022, Tagungsband 10. Kolloquium Fördertechnik im Bergbau. Langefeld, U.-P.D.-I. O. (ed.). Clausthal-Zellerfeld, p. 89-101 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Gedanken zur Ausbildung künftiger Rohstoffingenieurinnen und -ingenieure für nationale und globale Führungsaufgaben

    Flachberger, H., 21 Apr 2022.

    Research output: Contribution to conference › Presentation › Education

  60. Published

    Digitisation in Tunnelling – Engineering: Editorial

    Galler, R., 11 Apr 2022, In: Geomechanics and tunnelling = Geomechanik und Tunnelbau. 15.2022, 2, p. 150 1 p.

    Research output: Contribution to journal › Article › Research

  61. E-pub ahead of print

    Thermomechanical finite element modeling of steel ladle containing alumina spinel refractory lining

    Samadi, S., Jin, S., Gruber, D. & Harmuth, H., 1 Apr 2022, (E-pub ahead of print) In: Finite elements in analysis and design. 206.2022, 1 September, 10 p., 103762.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Influence of charge diameter and thickness of confinement on detonation velocity of ANFO explosives

    Bohanek, V., Dobrilović, M., Štimac, B., Hartlieb, P. & Marunic, B., Apr 2022.

    Research output: Contribution to conference › Paper

  63. Published

    Method for determination of effective binary diffusivities in dissolution of dense ceramic materials

    Guarco, J., Burhanuddin, B., Vollmann, S. & Harmuth, H., 15 Mar 2022, In: Ceramics International.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Verantwortungsvolle Beschaffung im Bereich der erneuerbaren Energien - Realität oder noch ein weiter Weg?

    Kügerl, M.-T. & Tost, M., 15 Mar 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 4, p. 140-145 6 p.

    Research output: Contribution to journal › Article › Research

  65. Published

    Nachhaltiger Bergbau 2050

    Tost, M., Streit, S., Endl, A. & Gugerell, K., 14 Mar 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 4, p. 151-157 7 p.

    Research output: Contribution to journal › Article › Research

  66. Published

    Forschungsdimension der European University on Responsible Consumption and Production – EURECA-PRO

    Kircher, V., Griebler, A., Feiel, S. & Moser, P., 11 Mar 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 4, p. 187-192 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Raise Caving—A Hybrid Mining Method Addressing Current Deep Cave Mining Challenges

    Ladinig, T., Wagner, H., Karlsson, M., Wimmer, M. & Grynienko, M., 11 Mar 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 4, p. 177-186 10 p.

    Research output: Contribution to journal › Article › Research

  68. Published

    Application of an improved testing device for the study of alumina dissolution in silicate slag

    Burhanuddin, B., Guarco, J., Harmuth, H. & Vollmann, S., 2 Mar 2022, In: Journal of the European Ceramic Society. 42.2022, 8, p. 3652-3659 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    The Usage of Challenge-based Learning in Industrial Engineering Education: Proceedings of the 24th International Conference on Interactive Collaborative Learning (ICL2021), Volume 2

    Woschank, M., Pacher, C., Miklautsch, P., Kaiblinger, A. & Murphy, M., 2 Mar 2022, Mobility for Smart Cities and Regional Development - Challenges for Higher Education. Auer, M. E., Hortsch, H., Michler, O. & Köhler, T. (eds.). Springer, p. 869–878 (Lecture Notes in Networks and Systems; vol. 390).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  70. E-pub ahead of print

    Numerical study of creep effect on purging plug performance under cyclic service

    Tan, F. G., Jin, S. L., He, Z., Liang, X., Li, Y. W. & Li, J., 25 Feb 2022, (E-pub ahead of print) In: Journal of iron and steel research international. 2022, 25 February, 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    An Interdisciplinary Systematic Review on Sustainability in Tunneling - Bibliometrics, Challenges, and Solutions

    Huymajer, M., Wögerbauer, M., Winkler, L., Mazak-Huemer, A. & Biedermann, H., 17 Feb 2022, In: Sustainability / Molecular Diversity Preservation International (MDPI) . 14.2022, 4, 33 p., 2275.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Multi-Criteria Decision Analysis for Evaluating Transitional and Post-Mining Options: An Innovative Perspective from the EIT ReviRIS Project

    Amaro, S. L., Barbosa, S., Ammerer, G., Bruno, A., Guimerà, J., Orfanoudakis, I., Ostręga, A., Mylona, E., Strydom, J. & Hitch, M., 17 Feb 2022, In: Sustainability. 14.2022, 4, 13 p., 2292.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Results of the EU H2020 project ThermoDrill – Contribution of rock mechanics to the utilization of geothermal energy

    Stoxreiter, T. & Galler, R., 17 Feb 2022, In: Geomechanics and tunnelling = Geomechanik und Tunnelbau. 15.2022, 1, p. 65-73 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    DEVICE FOR GUIDING A MATERIAL FLOW FLOWING OUT FROM A DISCHARGE END OR DELIVERY END OF A CONVEYING APPARATUS

    Prenner, M. (Inventor) & Dünnwald, W. (Inventor), 9 Feb 2022, IPC No. B65G15/08, B65G15/16, B65G15/22, Patent No. EP3947211(A1)

    Research output: Patent

  75. Published

    Polynomisches Kontaktmodell zur Abbildung pastösen Materialverhaltens in DEM-Simulationen

    Platzer, F. & Fimbinger, E., 7 Feb 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 2, p. 61-65 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Thermal impact of dykes on ignimbrite and implications for fluid flow compartmentalisation in calderas

    Kennedy, B. M., Heap, M. J., Burchardt, S., Villeneuve, M., Tuffen, H., Gilg, H. A., Davidson, J., Duncan, N., Saubin, E., Gestsson, E. B., Anjomrouz, M. & Butler, P., 4 Feb 2022, In: Volcanica. 5.2022, 1, p. 75-93 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Investigation of three-stage compressive creep of a spinel forming refractory castable containing 8% MgO

    Akbari, B., Gruber, D., Jin, S. & Harmuth, H., 1 Feb 2022, In: Ceramics International : CI. 48.2022, 3, p. 3287-3292 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    On the use of Drill Monitoring System to Assess a Blastability Index and Ore Grade Characterization for Open Pit Applications

    Navarro, J., Hartlieb, P., Cruceiro, P., Seidl, T., Sanchidrián, J. A., Segarra, P. & Schimek, P., Feb 2022, 48th annual conference on Explosives & Blasting technique.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    Abbautechnologien für zukünftige, mobile Bergbau-Roboter

    Berner, M. & Sifferlinger, N. A., 26 Jan 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 2, p. 76-83 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Monitoringsystem für Gurtbandförderer

    Prenner, M. & Müller, J., 26 Jan 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 2, p. 52-60 9 p.

    Research output: Contribution to journal › Article › Research

  81. Published

    Statusbericht – H2020-ROBOMINERS und M30 Projekttreffen

    Leitner, J., Berner, M. & Sifferlinger, N. A., 26 Jan 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 2, p. 84-86 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Evidence-based Redesign of Engineering Education Lectures: Theoretical Framework and Preliminary Empirical Evidence

    Ralph, B., Woschank, M., Pacher, C. & Murphy, M., 23 Jan 2022, In: European journal of engineering education : EJEE. 47.2002, 4, p. 636–663 28 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Stand der mechanischen Löseverfahren im Bergbau

    Sifferlinger, N. A., 22 Jan 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 2, p. 43-51 9 p.

    Research output: Contribution to journal › Article › Research

  84. E-pub ahead of print

    Automatic Detection of Slag Eye Area Based on a Hue-Saturation-Value Image Segmentation Algorithm

    Wang, G., Tan, F., Jin, S., He, Z., Li, Y. & Li, J., 7 Jan 2022, (E-pub ahead of print) In: JOM. 74.2022, 8, p. 2921-2929 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    A METHOD FOR SEPARATING A NON-HYDRAULIC PHASE FROM A HYDRAULIC PHASE IN A RECYCLABLE INDUSTRY PRODUCT

    Kamali Moaveni, A. (Inventor) & Böhm, A. (Inventor), 6 Jan 2022, IPC No. C22B 7/ 04 A I, Patent No. WO2022002845, 28 Jun 2021, Priority date 29 Jun 2020, Priority No. GB20200009869

    Research output: Patent

  86. Published

    A method for separating a non-hydraulic phase from a hydraulic phase in a recyclable industry product

    Ali, K. M. (Inventor) & Andreas, B. (Inventor), 5 Jan 2022, IPC No. C22B 7/ 04 A I, Patent No. GB2596529, Priority date 29 Jun 2020, Priority No. GB20200009869

    Research output: Patent

  87. Published

    Development of an automated single particle impact tester for iron ore sinter

    Denzel, M., Prenner, M. & Sifferlinger, N. A., 1 Jan 2022, In: Minerals engineering. 175.2022, 1 January, 11 p., 107291.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Chute Simulation MF460 – BC

    Prenner, M. & Leitner, J., Jan 2022, 11 p.

    Research output: Book/Report › Commissioned report › Research

  89. Published

    Neuromelt model for estimating mold flux melting behaviour

    Vargas Hernandez, M., Mapelli, C., Cho, J., Kölbl, N., Marschall, I., Alloni, M. & Carli, R., Jan 2022, In: Metallurgia Italiana. 2022, 1, p. 23-31 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Partikelbruchvorhersage an einem dynamischen Übergabesystem und Vergleich mit einer herkömmlichen Schurre mittels DEM

    Denzel, M. & Prenner, M., Jan 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 2, p. 66-75 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Significance of an inclined plane test for mould slag assessment

    Marschall, I., Harmuth, H. & Kircher, V., Jan 2022, In: Metallurgia Italiana. 2022, 1, p. 14-22 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    3D BIM Ausschreibungsmodell

    Eder, N., 2022

    Research output: Thesis › Master's Thesis

  93. Published

    4D optimization of intra-urban cut-and-cover method

    Mattner, K., 2022

    Research output: Thesis › Master's Thesis

  94. Published

    Abschätzung der Verwertbarkeit von Tunnelausbruchmaterial

    Lenes, J., 2022

    Research output: Thesis › Master's Thesis

  95. Published

    A contribution towards the practical implementation of stress management concepts in underground mining

    Ladinig, T., 2022

    Research output: Thesis › Doctoral Thesis

  96. Published

    A DEM Model for Complex-Shaped Particles to Simulate Breakage in Large-Scale Simulations

    Platzer, F., 2022

    Research output: Thesis › Master's Thesis

  97. Published

    Analyse und Vergleich von Wirbelstromscheidern aus dem Hause IFE Aufbereitungstechnik GmbH und Erstellung eines Leitfadens zur Konzeption innovativer Wirbelstromrotoren

    Krukenfellner, P., 2022

    Research output: Thesis › Master's Thesis

  98. Published

    Anpassung des Sicherheitskonzeptes für eine Langschmiedemaschine an die derzeit gültigen Vorschriften

    Bichler, M., 2022

    Research output: Thesis › Master's Thesis

  99. Published

    Application of Artificial Neural Network to Predict the Thermal and Thermomechanical Behavior of Refractory Linings

    Hou, A., Jin, S., Gruber, D. & Harmuth, H., 2022, 2022 International Joint Conference on Neural Networks, IJCNN 2022 - Proceedings. Institute of Electrical and Electronics Engineers, (Proceedings of the International Joint Conference on Neural Networks; vol. 2022-July).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    A predictive model to estimate swelling potential of expansive soils

    Narmandakh, D., 2022

    Research output: Thesis › Master's Thesis

  101. Published

    A simple method to model buckling slope instability using continuum numerical models

    Ridl, R., Bell, D., Villeneuve, M. & MacFarlane, D., 2022.

    Research output: Contribution to conference › Paper › peer-review

Previous 1 2 3 4 5 6 7 8 ...36 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 6601