Department Materials Science

Organisational unit: Departments and Institutes

601 - 700 out of 5,453Page size: 100

Research output

  1. 2022
  2. Published

    Prospects of enhancing the understanding of material-hydrogen interaction by novel in-situ and in-operando methods

    Massone, A. & Kiener, D., 26 Feb 2022, In: International Journal of Hydrogen Energy . 47.2022, 17, p. 10097-10111 15 p.

    Research output: Contribution to journal › Review article › peer-review

  3. Published

    Microstructural and micro-mechanical investigation of cathodic arc evaporated ZrN/TiN multilayer coatings with varying bilayer thickness

    Frank, F., Kainz, C., Tkadletz, M., Czettl, C., Pohler, M. & Schalk, N., 25 Feb 2022, In: Surface & coatings technology. 432.2022, 25 February, 9 p., 128070.

    Research output: Contribution to journal › Article › Research › peer-review

  4. E-pub ahead of print

    Ab initio -guided X-ray photoelectron spectroscopy quantification of Ti vacancies in Ti1−δOxN1−x thin films

    Ondračka, P., Hans, M., Holzapfel, D. M., Primetzhofer, D., Holec, D. & Schneider, J. M., 24 Feb 2022, (E-pub ahead of print) In: Acta materialia. 230.2022, 15 May, 7 p., 117778.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Relaxation and Strain-Hardening Relationships in Highly Rejuvenated Metallic Glasses

    Yuan, X., Şopu, D., Song, K. & Eckert, J., 24 Feb 2022, In: Materials. 15.2022, 5, 10 p., 1702.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Impact of Si on the high-temperature oxidation of AlCr(Si)N coatings

    Jäger, N., Meindlhumer, M., Zitek, M., Spor, S., Hruby, H., Nahif, F., Julin, J., Rosenthal, M., Keckes, J., Mitterer, C. & Daniel, R., 20 Feb 2022, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 100.2022, 20 February, p. 91-100 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. E-pub ahead of print

    Nanomaterials by severe plastic deformation: review of historical developments and recent advances

    Edalati, K., Bachmaier, A., Beloshenko, V. A., Beygelzimer, Y., Blank, V. D., Botta, W. J., Bryła, K., Čížek, J., Divinski, S., Enikeev, N. A., Estrin, Y., Faraji, G., Figueiredo, R. B., Fuji, M., Furuta, T., Grosdidier, T., Gubicza, J., Hohenwarter, A., Horita, Z. & Huot, J. & 29 others, Ikoma, Y., Janeček, M., Kawasaki, M., Král, P., Kuramoto, S., Langdon, T. G., Leiva, D. R., Levitas, V. I., Mazilkin, A., Mito, M., Miyamoto, H., Nishizaki, T., Pippan, R., Popov, V. V., Popova, E. N., Purcek, G., Renk, O., Révész, Á., Sauvage, X., Sklenicka, V., Skrotzki, W., Straumal, B. B., Suwas, S., Toth, L. S., Tsuji, N., Valiev, R. Z., Wilde, G., Zehetbauer, M. J. & Zhu, X., 17 Feb 2022, (E-pub ahead of print) In: Materials Research Letters. 10.2022, 4, p. 163-256 94 p.

    Research output: Contribution to journal › Review article › peer-review

  8. Published

    Cracking mechanism in a laser powder bed fused cold-work tool steel: The role of residual stresses, microstructure and local elemental concentrations

    Platl, J., Bodner, S. C., Hofer, C., Landefeld, A., Leitner, H., Turk, C., Nielsen, M.-A., Demir, A. G., Previtali, B., Keckes, J. & Schnitzer, R., 15 Feb 2022, In: Acta materialia. 225.2022, 15 February, 16 p., 117570.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Fracture of severely plastically deformed titanium

    Völker, B., Wurster, S., Pippan, R. & Hohenwarter, A., 15 Feb 2022, In: Materials letters. 309.2022, 15 February, 4 p., 131382.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Synthesis, thermodynamic analysis and magnetic study of novel ball- milled Co50Fe25Ta5Si5C15 glassy powders with high thermal stability

    Taghvaei, A. H., Nickjeh, H. S., Ramasamy, P. & Eckert, J., 15 Feb 2022, In: Journal of alloys and compounds. 894.2022, 15 February, 12 p., 162509.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Energies and structures of Cu/Nb and Cu/W interfaces from density functional theory and semi-empirical calculations

    Bodlos, R., Fotopoulos, V., Spitaler, J., Shluger, A. L. & Romaner, L., 13 Feb 2022, In: Materialia. 21.2022, March, 15 p., 101362.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Microstructural, chemical, and crystallographic investigations of dynamic strain‐induced ferrite in a microalloyed QT steel

    Monschein, S., Ragger, K., Fasching, J., Zügner, D. & Schnitzer, R., 10 Feb 2022, In: Materials. 12.2022, 2, 14 p., 313.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Multilayer crystal-amorphous Pd-based nanosheets on Si/SiO2 with interface-controlled ion transport for efficient hydrogen storage

    Sarac, B., Ivanov, Y. P., Karazehir, T., Mühlbacher, M., Sarac, A. S., Greer, A. L. & Eckert, J., 1 Feb 2022, In: International Journal of Hydrogen Energy . 47.2022, 10, p. 6777-6788 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Prediction of grain boundary chemistry in multicomponent Mo alloys with coupled precipitation and segregation kinetics simulations

    Scheiber, D., Povoden-Karadeniz, E., Kozeschnik, E. & Romaner, L., 1 Feb 2022, In: Acta materialia. 224.2022, 1 February, 8 p., 117482.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Solute drag assessment of grain boundary migration in Au

    Suhane, A., Scheiber, D., Popov, M., Razumovskiy, V. I., Romaner, L. & Militzer, M., 1 Feb 2022, In: Acta materialia. 224.2022, 1 February, 9 p., 117473.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Strain-stabilized Al-containing high-entropy sublattice nitrides

    Kretschmer, A., Holec, D., Yalamanchili, K., Rudigier, H., Hans, M., Schneider, J. M. & Mayrhofer, P. H., 1 Feb 2022, In: Acta materialia. 224.2022, 1 February, 14 p., 117483.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Nanoindentation creep behavior of an Fe–Cr–Mo–B–C amorphous coating via atmospheric plasma spraying

    Dong, Q., Tan, J., Huang, R., Wang, H., Song, P., Li, C. J., Feng, Z. X., Calin, M. & Eckert, J., Feb 2022, In: Intermetallics. 141.2022, February, 9 p., 107411.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Effect of supporting electrolyte on capacitance and morphology of electrodeposited poly(3,4-propylenedioxythiophene) derivatives bearing reactive functional groups

    Sarac, B., Karazehir, T., Gilsing, H. D., Eckert, J. & Sarac, A. S., 31 Jan 2022, In: Molecular Systems Design and Engineering. 7.2022, 5, p. 460-479 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Biocompatibility and antibacterial properties of TiCu(Ag) thin films produced by physical vapor deposition magnetron sputtering

    Rashid, S., Vita, G. M., Persichetti, L., Iucci, G., Battocchio, C., Daniel, R., Visaggio, D., Marsotto, M., Visca, P., Bemporad, E., Ascenzi, P., Capellini, G., Sebastiani, M. & di Masi, A., 30 Jan 2022, In: Applied surface science. 573.2022, 30 January, 12 p., 151604.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Optimization of the post-process heat treatment strategy for a Near-α Titanium base alloy produced by laser powder bed fusion

    Fleißner-Rieger, C., Pfeifer, T., Turk, C. & Clemens, H., 28 Jan 2022, In: Materials. 15.2022, 3, p. 1-14 14 p., 1032.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Precipitation behavior of a Co-free Fe-Ni-Cr-Mo-Ti-Al maraging steel after severe plastic deformation

    Zeisl, S., Lassnig, A., Hohenwarter, A. & Mendez Martin, F., 26 Jan 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 833.2022, 26 January, 9 p., 142416.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Materials Engineering for Flexible Metallic Thin Film Applications

    Cordill, M. J., Kreiml, P. & Mitterer, C., 25 Jan 2022, In: Materials. 15.2022, 3, 25 p., 926.

    Research output: Contribution to journal › Review article › peer-review

  23. E-pub ahead of print

    Stabilization of Al 3 Zr allotropes in dilute aluminum alloys via the addition of ternary elements

    Schmid, F., Gehringer, D., Kremmer, T., Cattini, L., Uggowitzer, P., Holec, D. & Pogatscher, S., 25 Jan 2022, (E-pub ahead of print) In: Materialia. 21.2022, March, 11 p., 101321.

    Research output: Contribution to journal › Article › Research › peer-review

  24. E-pub ahead of print

    Stability and ordering of bcc and hcp TiAl+Mo phases: An ab initio study

    Dehghani, M., Ruban, A. V., Abdoshahi, N., Holec, D. & Spitaler, J., 18 Jan 2022, (E-pub ahead of print) In: Computational materials science. 205.2022, 1 April, 11 p., 111163.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Alloy design strategy for microstructural-tailored scandium-modified aluminium alloys for additive manufacturing

    Schimbäck, D., Mair, P., Bärtl, M., Palm, F., Leichtfried, G., Mayer, S., Uggowitzer, P. J. & Pogatscher, S., 15 Jan 2022, In: Scripta Materialia. 207.2022, 15 January, 6 p., 114277.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Hard coatings for cutting applications: Physical vs. chemical vapor deposition and future challenges for the coatings community

    Schalk, N., Tkadletz, M. & Mitterer, C., 15 Jan 2022, In: Surface & coatings technology. 429.2022, 15 January, 30 p., 127949.

    Research output: Contribution to journal › Review article › peer-review

  27. Published

    Microstructure-dependent phase stability and precipitation kinetics in equiatomic CrMnFeCoNi high-entropy alloy: Role of grain boundaries

    Daniel, R., Zalesak, J., Matko, I., Baumegger, W., Hohenwarter, A., George, E. P. & Keckes, J., 15 Jan 2022, In: Acta materialia. 223.2022, 15 January, 8 p., 117470.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Thermodynamic and kinetic interpretation of the glass-forming ability of Y-containing Cu-Zr-Al bulk metallic glasses

    Malekan, M., Rashidi, R., Shabestari, S. G. & Eckert, J., 15 Jan 2022, In: Journal of non-crystalline solids. 576.2022, 15 January, 8 p., 121266.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Effect of a Solute Ta on Grain Refinement of Al-7Si-0.3Mg Based Alloys

    Spacil, I., Holec, D., Schumacher, P. & LI, J., 10 Jan 2022, Solid State Phenomena. Vol. 327.2022. p. 54-64 (Solid State Phenomena).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  30. Published

    Influence of B content on microstructure, phase composition and mechanical properties of CVD Ti(B,N) coatings

    Tkadletz, M., Schalk, N., Lechner, A., Hatzenbichler, L., Holec, D., Hofer, C., Deluca, M., Sartory, B., Lyapin, A., Julin, J. & Czettl, C., 10 Jan 2022, In: Materialia. 21.2022, March, 9 p., 101323.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Structure-dynamics relationships in cryogenically deformed bulk metallic glass

    Spieckermann, F., Şopu, D., Soprunyuk, V., Kerber, M. B., Bednarčík, J., Schökel, A., Rezvan, A., Ketov, S., Sarac, B., Schafler, E. & Eckert, J., 10 Jan 2022, In: Nature Communications. 13.2022, 1, 9 p., 127.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Annealing metallic glasses above Tg in order to accelerate the relaxation process in molecular dynamics simulations

    Sopu, D., Yuan, X. & Eckert, J., 6 Jan 2022, In: Applied physics letters. 120.2022, 1, 011904.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Morphology and properties of foamed high crystallinity PEEK prepared by high temperature thermally induced phase separation

    Rusakov, D., Menner, A., Spieckermann, F., Wilhelm, H. & Bismarck, A., 5 Jan 2022, In: Journal of applied polymer science. 139, 1, 51423.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Significant interlayer coupling in bilayer graphene and double-walled carbon nanotubes: A refinement of obtaining strain in low-dimensional materials

    Sun, Y., Gehringer, D., Holec, D., Papageorgiou, D. G., Fenwick, O., Qureshi, S. M., Humphreys, C. J. & Dunstan, D. J., 5 Jan 2022, In: Physical review : B, Condensed matter and materials physics. 105.2022, 2, 7 p., 024103.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Bond strength between TiN coating and microstructural constituents of a high speed steel determined by first principle calculations

    Gsellmann, M., Scheiber, D., Klünsner, T., Zalesak, J., Zhang, Z., Leitner, H., Mitterer, C., Ressel, G. & Romaner, L., 1 Jan 2022, In: Acta materialia. 222.2022, 1 January, 9 p., 117439.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Effect of binder system on the thermophysical properties of 3D-printed zirconia ceramics

    Hofer, A. K., Rabitsch, J., Jutrzenka-Trzebiatowska, D., Hofstetter, C., Gavalda-Velasco, I., Schlacher, J., Schwentenwein, M. & Bermejo, R., 1 Jan 2022, In: International journal of applied ceramic technology. 19, 1, p. 174-180 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    In-situ observation of the phase evolution during an electromagnetic-assisted sintering experiment of an intermetallic γ -TiAl based alloy

    Musi, M., Galy, B., Monchoux, J.-P., Couret, A., Clemens, H. & Mayer, S., 1 Jan 2022, In: Scripta materialia. 206.2022, 1 January, 4 p., 114233.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Nanoporous polymer-derived activated carbon for hydrogen adsorption and electrochemical energy storage

    Kostoglou, N., Koczwara, C., Stock, S., Tampaxis, C., Charalambopoulou, G., Steriotis, T., Paris, O., Rebholz, C. & Mitterer, C., 1 Jan 2022, In: Chemical Engineering Journal. 427.2021, 1 January, 10 p., 131730.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Additive Fertigung von Nickelbasissuperlegierungen: Rissbildung, Gefügeanalyse und Prozessoptimierung

    Käfer, N., 2022

    Research output: Thesis › Master's Thesis

  40. Published

    Applications of Data Driven Methods in Computational Materials Design

    Dösinger, C. A., Spitaler, T., Reichmann, A., Scheiber, D. & Romaner, L., 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167-2022, 1, p. 29-35 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    A simple and effective way to evaluate the accuracy of digital image correlation combined with scanning electron microscopy (SEM-DIC)

    Glushko, O., 2022, In: Results in Materials. 14.2022, June, 3 p., 100276.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Atomic-Scale Study on Dopant- and Strain-Effects in Bismuth-Ferrite Thin Films

    Haselmann, U., 2022

    Research output: Thesis › Doctoral Thesis

  43. Published

    Bulk diffusion of impurities in TiN: An ab initio study

    Nayak, G. K., Popov, M. N. & Holec, D., 2022.

    Research output: Contribution to conference › Poster › Research

  44. Published

    Combined electro-mechanical and tribological behavior of MoN films deposited on thin polyimide foils

    Rebelo de Figueiredo, M., Kirchmair, M., Kobierska, E., Kreiml, P., Franz, R. & Cordill, M., 2022.

    Research output: Contribution to conference › Poster › Research

  45. Published

    Consideration of critical aspects concerning large-scale production and use in automotive applications based on an optimized alloying concept for a batch-annealed medium-Mn780 grade

    Steineder, K., Krizan, D., Stadler, M., Ritsche, S., Berger, E., Holtmann, N., Schnitzer, R. & Schneider, R., 2022, Proceedings of the 5th Int. High Manganese Steel Conf.. p. 79-82

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Critical aspects concerning large-scale production of a batch-annealed medium-Mn 780 MPa grade for automotive applications

    Steineder, K., Krizan, D., Stadler, M., Ritsche, S., Berger, E., Holtmann, N., Schnitzer, R. & Schneider, R., 2022, 5th International High Manganese Steel Conference. p. 79-82

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Data-driven design guidelines for ceramic superlattices with enhanced fracture resistance

    Koutná, N., Holec, D., Brenner, A. & Mayrhofer, P. H., 2022.

    Research output: Contribution to conference › Poster › Research

  48. Published

    Data-driven Thermodynamic Modelling and Uncertainty Quantification of the Binary Iron-Carbon System

    Bechter, J., 2022

    Research output: Thesis › Master's Thesis

  49. Published

    Defects and their influence on mechanical properties in nitrides: an atomistic study

    Löfler, L., 2022

    Research output: Thesis › Doctoral Thesis

  50. Published

    Deformation behaviour of hexagonal closed packed zinc and magnesium with reference to size-effect and c/a-ratio

    Buchebner, N., 2022

    Research output: Thesis › Master's Thesis

  51. Published

    Development of a semi-automated molecular dynamics workflow for testing interatomic potentials against ab-initio data

    Halkali, C., 2022

    Research output: Thesis › Master's Thesis

  52. Published

    Development of Ceramic Electrodes for Spark Plugs: Materials Selection

    Harrer, W., Tilz, A., Engelmayer, M., Gruber, M., Danzer, R. & Fimml, W., 2022, In: Ceramic forum international (CFI). 99, 6, p. E1-E6

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Development of TiAlN based hard coatings applying advanced characterization methods

    Waldl, H., 2022

    Research output: Thesis › Doctoral Thesis

  54. Published

    Effect of airborne-particle abrasion of yttria-containing zirconia dental ceramics on mechanical properties before and after regeneration firing

    Mirt, T., Abram, A., van del Velde, N., Jerman, I., Bermejo, R., Kocjan, A. & Jevnikar, P., 2022, In: Journal of the European Ceramic Society. p. 5035-5044

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Effect of crystal orientation on the hardness and strength of piezoelectric LiNbO3 substrates for microelectronic applications

    Gruber, M., Leitner, A., Kiener, D., Supancic, P. & Bermejo, R., 2022, In: Materials and Design. 213, 110306.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Effect of Solute Ta on Grain Refinement of Al-7Si-0.3Mg Based Alloys

    Spacil, I., Holec, D., Schumacher, P. & Li, J., 2022, Semi-Solid of Alloys and Composites XVI - Selected peer-reviewed full text papers from the 16th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2021. Li, J. & Rassili, A. (eds.). Trans Tech Publications, p. 54-64 11 p. (Solid State Phenomena; vol. 327 SSP).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Effect of the wire and arc additive manufacturing process on microstructure and aging behavior of a magnesium alloy studied by HEXRD

    Graf, G., Klein, T., Maawad, E., Burtscher, M., Kiener, D., Clemens, H. & Spörk-Erdely, P., 2022.

    Research output: Contribution to conference › Poster › Research

  58. Published

    Einfluss der Prozessparameter auf die Gefügeentwicklung von Kaltfließpressstählen bei thermomechanischer Umformung

    Käsznar, K., 2022

    Research output: Thesis › Master's Thesis

  59. Published

    Einfluss von Legierungselementen auf die Eigenschaften von niedriglegiertem, warmfestem CrMoV-Schweißgut

    Schrittwieser, D., 2022

    Research output: Thesis › Master's Thesis

  60. Published

    Enhanced mechanical performance of nanostructured metals through systematically modified interfaces

    Wurmshuber, M., 2022

    Research output: Thesis › Doctoral Thesis

  61. Published

    Entwicklung einer verschleißbeständigen Stahlgusslegierung für Warmarbeitswalzen mit erhöhter Warmfestigkeit

    Reiter, M., 2022

    Research output: Thesis › Master's Thesis

  62. Published

    Entwicklung hochfester Quenching & Partitioning Stähle

    Kickinger, C., 2022

    Research output: Thesis › Doctoral Thesis

  63. Published

    Evaluation of the high cycle fatigue behaviour of high-strength MoRe alloys by means of rotary bending tests

    Lichtenegger, H., 2022

    Research output: Thesis › Master's Thesis

  64. Accepted/In press

    Experimental and theoretical studies on two-dimensional vanadium carbide hybrid nanomaterials derived from V4AlC3 as excellent catalyst for MgH2

    Lan, Z., Liang, H., Wen, X., Hu, J., Ning, H., Zeng, L., Liu, H., Tan, J., Eckert, J. & Guo, J., 2022, (Accepted/In press) In: Journal of magnesium and alloys. ???, ??? Stand:13.Februar2023

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Exploring phase transformations and phase stabilities in titanium aluminide based alloys

    Musi, M., 2022

    Research output: Thesis › Doctoral Thesis

  66. Published

    Film thickness and architecture effects in biaxially strained polymer supported Al/Mo bilayers

    Cordill, M., Kreiml, P., Putz, B., Trost, C. O. W., Lassnig, A., Mitterer, C., Faurie, D. & Renault, P.-O., 2022, In: Materials Today Communications. 31.2022, June, 11 p., 103455.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    High-resolution characterization of precipitates in multi-layer submerged-arc welded 2.25Cr-1Mo-0.25V steel

    Fleißner-Rieger, H., Kremmer, T., Brabetz, M., Krein, R., Pahr, H., Peruzzi, M. & Schnitzer, R., 2022, In: Materials Today Communications. 31.2022, June, 11 p., 103299.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    High-strength lithography-based additive manufacturing of ceramic components with rapid sintering

    Hofer, A.-K., Kocjan, A. & Bermejo Moratinos, R., 2022, In: Additive Manufacturing. 103141.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    High-temperature micromechanical testing of silicon

    Schaffar, G. J. K. & Tscharnuter, D., 2022.

    Research output: Contribution to conference › Poster › Research

  70. Published

    How to increase scrap recycling

    Häuselmann, M., Rieger, J., Schenk, J., Schnitzer, R., Sakic, A., Michelic, S. K. & Cejka, J., 2022, In: Steel times international. 46.2022, 8*December, p. 34-38

    Research output: Contribution to journal › Article › Research

  71. Published

    Indentation unloading phase transformations in silicon: A new perspective

    Schaffar, G. J. K., Tscharnuter, D. & Maier-Kiener, V., 2022.

    Research output: Contribution to conference › Poster › Research

  72. Published

    Influence of interlayers on the interfacial behavior of Ag films on polymer substrates

    Cordill, M., Paulitsch, M., Katsarelis, C., Putz, B., Lassnig, A. & Kennedy, M. S., 2022, In: Thin solid films. 742, 139051.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Influence of microalloying elements and deformation parameters on the recrystallization behavior and microstructural evolution of HSLA steels

    Monschein, S., 2022

    Research output: Thesis › Doctoral Thesis

  74. Published

    In-situ thermo-mechanical cycling of Si-TiW-Cu thin film structures

    Seligmann, B., 2022

    Research output: Thesis › Master's Thesis

  75. Published

    Intricacies involving the evaluation of fracture toughness obtained by the surface‐crack‐in‐flexure method

    Lubauer, J., Lohbauer, U., Henrich, M., Munz, M., Lube, T. & Belli, R., 2022, In: Journal of the American Ceramic Society. p. 7582-7599

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Investigation of MoNbTaW-X(X=Ti, V, Cr, Mn, Hf) refractory high entropy alloy thin films deposited by high power impulse magnetron sputtering

    Gruber, G., Žák, S., Lassnig, A., Gammer, C., Cordill, M. J. & Franz, R., 2022.

    Research output: Contribution to conference › Poster › Research

  77. Published

    Investigation of the crystallization behavior of iron-based metallic glasses for electrical devices

    Römer, F. J., 2022

    Research output: Thesis › Master's Thesis

  78. Published

    Investigation of the influence of alternative spark plug electrode material on ignition behaviour

    Tilz, A., Gruber, M., Harrer, W., Engelmayer, M., Fimml, W., Klawitter, M. & Wimmer, A., 2022, Proc. of Internal Combustion Engine Division Fall Technical Conference - ICEF2022.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    Kornwachstum und Rekristallisationsverhalten von HSLA-Stählen

    Eschelbeck, J., 2022

    Research output: Thesis › Master's Thesis

  80. Published

    Legierungs- und Prozessentwicklung von (α+β)-Titanlegierungen für ballistische Schutzanwendungen

    Janda, A., 2022

    Research output: Thesis › Doctoral Thesis

  81. Published

    Lithography-based additive manufacturing of porosity graded alumina

    Nohut, S., Geier, S., Kraleva, I. R., Schwentenwein, M. & Bermejo Moratinos, R., 2022, In: Additive Manufacturing Letters. 3, 100060.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Magnetoresistive behavior of nanocrystalline materials processed by high-pressure torsion

    Kasalo, M., 2022

    Research output: Thesis › Master's Thesis

  83. Published

    Magnetron Sputtered Non-Toxic and Precious Element-Free Ti-Zr-Ge Metallic Glass Nanofilms with Enhanced Biocorrosion Resistance

    Sarac, B., Micusik, M., Putz, B., Wurster, S., Sharifikolouei, E., Xi, L., Omastova, M., Spieckermann, F., Mitterer, C. & Eckert, J., 2022, In: Advanced Materials Interfaces. 2201223.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Materialanalyse von medizinischen Kanülen

    Zeitlhofer, T., 2022

    Research output: Thesis › Master's Thesis

  85. Published

    Methodik zur mechanischen Charakterisierung additiv gefertig-ter Bauteile als Funktion der Ausrichtung während des Bauprozesses und den daraus resultierenden Oberflächeneigenschaften (CharAM)

    Scheithauer, U., Brouczek, D., Lorenz, N., Lube, T., Reichel, M., Schmid, H., Scholz, S., Schwarzer-Fisher, E., Schwentenwein, M. & Staudacher, M., 2022, Werkstoffe und Bauteile auf dem Prüfstand: Prüftechnik – Kennwertermittlung – Schadensvermeidung: 40. Vortrags- und Diskussionstagung Werkstoffprüfung 2022.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Microstructural adjustment of hot-rolled Ti–6Al–4V based on a CCT diagram

    Janda, A., Ebenbauer, S., Prestl, A., Siller, I. & Clemens, H., 2022, In: Materials science and technology. 38.2022, 13, p. 957-964 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Microstructure and mechanical properties of TiN/CrN multilayer coatings deposited in an industrial-scale HiPIMS system

    Sala Bascompte, N., Abad, M. D., Rebelo de Figueiredo, M., Franz, R., Kainz, C. & Colominas, C., 2022.

    Research output: Contribution to conference › Poster › Research

  88. Published

    Microstructure, mechanical properties and thermal stability of arc evaporated Cr0.69Ta0.20B0.11N coatings

    Kainz, C., Pohler, M., Tkadletz, M., Czettl, C. & Schalk, N., 2022.

    Research output: Contribution to conference › Poster › Research

  89. Published

    Microstructure-property relationships of creep-resistant 2.25Cr-1Mo-0.25V submerged-arc weld metal

    Schönmaier, H., 2022

    Research output: Thesis › Doctoral Thesis

  90. Published

    Mikrostrukturelle und hochauflösende Charakterisierung thermomechanisch gewalzter Bleche

    Kostwein, N., 2022

    Research output: Thesis › Master's Thesis

  91. Published

    Multifunctional performance of Ti2AlC MAX phase/2D braided alumina fiber laminates

    Gonzales-Julian, J., Kraleva, I. R., Belmonte, M., Jung, F., Gries, T. & Bermejo Moratinos, R., 2022, In: Journal of the American Ceramic Society. 105, p. 102-130

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Nanobeam electron diffraction strain mapping in monocrystalline silicon of modern trench power MOSFETs

    Karner, S., Blank, O., Rösch, M., Zalesak, J., Keckes, J. & Gammer, C., 2022, In: Microelectronic engineering. 264.2022, 15 August, 111870.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Nanoscale Metafoils with Enhanced Mechano-Optical Properties for Solar Radiation Isolation

    Xomalis, A., Putz, B., Zheng, X., Groetsch, A., Vandenbosch, G. A. E., Michler, J. & Schwiedrzik, J., 2022, In: ACS Applied Nano Materials. 2022, p. 16164-16171

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Neuartige Stahl-Schutzbleche für automobile Anwendungen

    Göbl, M., 2022

    Research output: Thesis › Doctoral Thesis

  95. Published

    On the preparation of W-Re conversion layers for highresolution electron microscopy based studies

    Sommerauer, M., Siller, M., Gottlieb, H., Clemens, H. & Maier-Kiener, V., 2022.

    Research output: Contribution to conference › Poster › Research

  96. Published

    On the transition of failure control from material-intrinsic defects to defects forming during monotonically increasing and cyclic mechanical loading in WC-Co hard metal at elevated temperature

    Klünsner, T., Lube, T., Pichler, P., Krobath, M., Walch, L., Maier, K., Ecker, W., Marsoner, S., Czettl, C. & Pippan, R., 2022, In: Acta materialia. 235, 118087.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Oxidation mechanism of TiSiN and TiAlSiN coatings investigated by in-situ X-ray diffraction

    Moritz, Y., Saringer, C., Tkadletz, M., Stark, A., Schell, N., Czettl, C., Pohler, M. & Schalk, N., 2022.

    Research output: Contribution to conference › Poster › Research

  98. Published

    Oxidation resistance of arc-evaporated Cr0.74Ta0.26N coatings

    Kainz, C., Saringer, C., Burtscher, M., Tkadletz, M., Stark, A., Schell, N., Pohler, M., Czettl, C., Kiener, D. & Schalk, N., 2022.

    Research output: Contribution to conference › Poster › Research

  99. Published

    Polycrystal diffraction elastic constants of advanced γ-TiAl based sheets

    Obersteiner, D., Staron, P., Maawad, E., Ambig, A., Hatzenbichler, L., Holec, D. & Spörk-Erdely, P., 2022.

    Research output: Contribution to conference › Poster › Research

  100. Published

    Prediciting Phase Stability of TiAl-based High Entropy Alloys from First-Principles

    Hatzenbichler, L., 2022

    Research output: Thesis › Master's Thesis

  101. Published

    Probing local atomic strain of metallic glasses with nanometer resolution using TEM diffraction mapping

    Keckes, J., 2022

    Research output: Thesis › Master's Thesis

Previous 1...3 4 5 6 7 8 9 10 ...55 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9/1.UG, 8700 Leoben