Department Materials Science

Organisational unit: Departments and Institutes

1301 - 1400 out of 5,456Page size: 100

Research output

  1. 2019
  2. Published

    Nanostructured metallic materials and composites: Processes, properties and microstructures

    Bachmaier, A., Hohenwarter, A., Höppel, H. W. & Ivanisenko, J., Jan 2019, In: Advanced engineering materials. 21.2019, 1, 2 p., 1801073.

    Research output: Contribution to journal › Editorial › peer-review

  3. Published

    Additive manufacturing of a low-alloyed engineering steel

    Aumayr, C., Platl, J., Zunko, H. & Turk, C., 2019, Metal Additive Manufacturing Conference - Industrial perspectives in Additive Technologies_Ebook. p. 251-258

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    An ab initio study of thermodynamic and mechanical stability of stoichiometric Fe2CoAl polymorphs

    Friák, M., Oweisová, S., Pavlu, J., Holec, D. & Šob, M., 2019.

    Research output: Contribution to conference › Poster › Research

  5. Published

    Anisotropy of fracture toughness in nanostructured ceramics controlled by grain boundary design

    Daniel, R., Meindlhumer, M., Baumegger, W., Todt, J., Zalesak, J., Ziegelwanger, T., Mitterer, C. & Keckes, J., 2019, In: Materials and Design. 161.2019, January, p. 80-85 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    A tailored TiAl alloy for the powder bed based laser additive manufacturing

    Schimbäck, D., 2019

    Research output: Thesis › Master's Thesis

  7. Published

    Atomsondentomographie der Oxidschicht von korrosionsbeständigen austenitischen Stählen

    Monschein, S., 2019

    Research output: Thesis › Master's Thesis

  8. Published

    Ausgewählte Methoden der quantitativen Phasenanalyse einer additiv gefertigten TNM-Titanaluminid-Legierung

    Wartbichler, R., Bürstmayr, R., Clemens, H. & Mayer, S., 2019, In: Practical metallography = Praktische Metallographie. 56.2019, 4, p. 220-229 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Austenite decomposition and carbon partitioning during quenching and partitioning heat treatments studied via in-situ X-ray diffraction

    Ebner, S., Suppan, C., Stark, A., Schnitzer, R. & Hofer, C., 2019, In: Materials and Design. 178.2019, September, 107862.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Austenite memory and spontaneous recrystallization and its influence on the martensitic substructure of a PH 15-5 steel during solution annealing

    Brandl, D. C., 2019

    Research output: Thesis › Doctoral Thesis

  11. Published

    Auswirkung fertigungsbedingter Eigenspannungen bei der Schraubenherstellung auf die Festigkeit und die Relaxationsbeständigkeit

    Mayer, M., 2019

    Research output: Thesis › Master's Thesis

  12. Published

    Bainitic reaction under continuous cooling conditions and tempering behaviour of a bainitic microstructure in a low alloyed steel

    Reisinger, S., 2019

    Research output: Thesis › Doctoral Thesis

  13. Published

    Beryllium – A challenge for preparation and mechanical characterization

    Siller, M., Kappacher, J., Rolli, R., Clemens, H. & Maier-Kiener, V., 2019, In: Practical metallography = Praktische Metallographie. 56.2019, 10, p. 624-633 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Characterization of gas sensitive metal-oxide thin films by Raman Spectroscopy

    Holzer, M. S., 2019

    Research output: Thesis › Master's Thesis

  15. Published

    Charakterisierung von additiv gefertigtem Aluminiumoxid

    Schlacher, J. C., 2019

    Research output: Thesis › Master's Thesis

  16. Published

    Chemnical Bonding Effects on the Brittle-to-Ductile Transition in Metallic Glasses

    Moitzi, F., Sopu, D. (Co-editor) & Eckert, J. (Co-editor), 2019.

    Research output: Contribution to conference › Poster › Research

  17. Published

    Copper adsorption by chemically modified pine needles

    Solomi, A., Philippou, K., Kostoglou, N., Pashhalidis, I. & Rebholz, C., 2019.

    Research output: Contribution to conference › Poster › Research

  18. Published

    Correlations of microstructural and mechanical anisotropy of ultra-high strength steels

    Esterl, R., 2019

    Research output: Thesis › Doctoral Thesis

  19. Published

    Crystallographic orientation dependent maximum layer thickness of cubic AlN in CrN / AlN multilayers

    Chen, Z., Holec, D., Bartosik, M., Mayrhofer, P. H. & Zhang, Z., 2019, In: Acta materialia. 168.2019, 15 April, p. 190-202 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Das Institut für Struktur- und Funktionskeramik

    Danzer, R., 2019, 3 p. Leoben

    Research output: Other contribution › Transfer

  21. Published

    Deformation and Crystallization Kinetics of a Softmagnetic Iron Based Bulk Metallic Glass

    Eckert, J., Antoni, M., Chawake, N., Sarac, B., Bachmaier, A., Polak, C., Spieckermann, F., Pippan, R., Zehetbauer, M. J. & Grössinger, R., 2019.

    Research output: Contribution to conference › Poster › Research

  22. Published

    Deformation Mechanisms in Metallic Glasses: An Atomistic Study

    Moitzi, F., 2019

    Research output: Thesis › Master's Thesis

  23. Published

    Design and fabrication of various MEMS-based structures for investigating thermo-mechanical and fatigue behavior of thin metal films and metal barriers

    Saghaeian, F., 2019

    Research output: Thesis › Doctoral Thesis

  24. Published

    Effects of alloying and fluxing treatment on thermal, magnetic and structural properties of Fe-(Ni,Co)-P-C metallic glass ribbons

    Yüce, E., 2019

    Research output: Thesis › Master's Thesis

  25. Published

    Einfluss von Inhibitorlösungen auf das Korrosions- und Schwingfestigkeitsverhalten von legierten und unlegierten Stählen

    Freitag, C., 2019

    Research output: Thesis › Master's Thesis

  26. Published

    Evolution of structure and residual stress of a fcc/hex-AlCrN multi-layered system upon thermal loading revealed by cross-sectional X-ray nano-diffraction

    Jäger, N., Klima, S., Hruby, H., Julin, J., Burghammer, M., Keckes, J., Mitterer, C. & Daniel, R., 2019, In: Acta materialia. 162.2019, 1, p. 55-66 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Exploring the mechanical character of molybdenum grain boundaries via nanoindentation and three-point-bending

    Jakob, S., Leitner, A., Hohenwarter, A., Lorich, A., Knabl, W., Clemens, H., Pippan, R. & Maier-Kiener, V., 2019.

    Research output: Contribution to conference › Poster › Research

  28. Published

    Formation of an orthorhombic transition phase in a Ti-Al-3Mo alloy: in situ synchrotron diffraction and TEM studies

    Rashkova, B., Musi, M., Erdely, P., Stark, A., Staron, P., Schell, N., Clemens, H. & Mayer, S., 2019.

    Research output: Contribution to conference › Poster › Research

  29. Published

    Fracture toughness of Silicon Nitride Measured by the Surface Crack in Flexure (SCF) Test Method

    Nindhia, T. G. T. & Lube, T., 2019, In: IOP Conference Series: Materials Science and Engineering. 622, 012001.

    Research output: Contribution to journal › Article › Transfer › peer-review

  30. Published

    Franz Jeglitsch: Leoben, Politik und Gefüge

    Danzer, R., 2019, 3 p. Leoben

    Research output: Other contribution › Transfer

  31. Published

    Frühere Stadien der Ausscheidungsbildung eines dualhärtenden Stahls

    Hofinger, M., Ognianov, M., Turk, C., Leitner, H. & Schnitzer, R., 2019, ASMET Werkstofftechniktagung 2019 & 31. Härtereitagung. p. 102-106

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    High pressure torsion deformation of nanocarbon-reinforced metal matrix composites

    Katzensteiner, A., 2019

    Research output: Thesis › Doctoral Thesis

  33. Published

    High-Resolution characterization of intermetallic TiAI-Powder for additive Manufacturing

    Wimler, D., Gammer, C., Eckert, J., Mendez Martin, F., Lindemann, J., Clemens, H. & Mayer, S., 2019, Euro PM2019 - Powders for AM - Powder Production. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Hochauflösende Mikrostrukturuntersuchungen zum Einfluss von Vorauslagerung und Kaltverformung auf die Warmauslagerungskinetik von AlMgSi-Legierungen (EN AW-6016)

    Bergmann, J., 2019

    Research output: Thesis › Master's Thesis

  35. Published

    Implementation of femtosecond laser processing for materials testing and research

    Pfeifenberger, M., 2019

    Research output: Thesis › Doctoral Thesis

  36. Published

    Influence of V and Nb Micro-Alloying on Direct Quenched and Tempered Ultra-High Strength Steels

    Esterl, R., Schnitzer, R., Sonnleitner, M. & Gschöpf, B., 2019, In: Steel research international. 90.2019, 9 p., 800640.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Kriechverhalten verschiedener Siliziumnitrid-Keramiken

    Prackwieser, R., 2019

    Research output: Thesis › Master's Thesis

  38. Published

    Materialographie intermetallischer Titanaluminide - die (additive) Fertigung macht den Unterschied

    Mayer, S., Schimbäck, D., Wartbichler, R., Wimler, D. & Clemens, H., 2019, Praktische Metallographie Sonderband 53. p. 21-30

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Mechanical, Physical and Structural Investigation of Severe Plastically Deformed CuZr-Based Metallic Glasses

    Rezvan, A., 2019

    Research output: Thesis › Master's Thesis

  40. Published

    Mikrostrukturelle Charakterisierung einer pulvermetallurgisch hergestellten mehrphasigen TiAl-Legierung

    Burtscher, M., Pürstl, F., Schloffer, M., Mayer, S. & Clemens, H., 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 5, p. 210 - 214 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Mikrostrukturelle Charakterisierung von Titanblechen zum Personenschutz

    Janda, A., 2019

    Research output: Thesis › Master's Thesis

  42. Published

    Mikrostruktur- und Phasenanalyse einer additiv gefertigten intermetallischen TiAl Legierung mittels metallographischer Methoden und hochenergetischer Röntgenstrahlung

    Jop, M., Wartbichler, R., Staron, P., Maawad, E., Mayer, S. & Clemens, H., 2019, Praktische Metallographie Sonderband 53. p. 155-162

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Nanoindentation response of single crystal copper films on sapphire

    Sträußnigg, J. M., 2019

    Research output: Thesis › Master's Thesis

  44. Published

    Nanoporous activated carbon cloth for H2 storage, selective CO2/CH4 separation and supercapacitor energy storage

    Kostoglou, N., Koczwara, C., Prehal, C., Babic, B., Tampaxis, C., Charalambopoulou, G., Steriotis, T., Polychronopouloe, K., Constantinides, G., Paris, O., Rebholz, C. & Mitterer, C., 2019.

    Research output: Contribution to conference › Poster › Research

  45. Published

    Optimierung von intermetallischen TiAl Legierungen in Hinblick auf die Erhöhung der Anwendungstemperatur

    Burtscher, M., 2019

    Research output: Thesis › Doctoral Thesis

  46. Published

    Oxidation behavior of TiAlN-based coatings

    Guo, F., Holec, D., Wang, J., Chen, L. & Du, Y., 2019.

    Research output: Contribution to conference › Poster › Research

  47. Published

    Plasma-Assisted Surface Engineering: Application for Displays and Leather

    Hofer-Roblyek, A. M., 2019

    Research output: Thesis › Doctoral Thesis

  48. Published

    Pulsed Cathodic Arcs from Nb-Al Cathodes

    Zöhrer, S., 2019

    Research output: Thesis › Doctoral Thesis

  49. Published

    Scale-bridging methodology for thermal transport characterization of microelectronic devices

    Mitterhuber, L. M., 2019

    Research output: Thesis › Doctoral Thesis

  50. Published

    Single Edge Precrack V-Notched Beam (SEPVNB) Fracture Toughness Testing on Silicon Nitride

    Nindhia, T. G. T. & Lube, T., 2019, Materials science forum. Trans Tech Publications, Vol. 962. p. 205-209 5 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  51. Published

    Sputter Deposition of Multifunctional Thin Films

    Rausch, M., 2019

    Research output: Thesis › Doctoral Thesis

  52. Published

    Structure and surface energies of nanoparticles

    Holec, D., Fischer, F.-D. & Vollath, D., 2019.

    Research output: Contribution to conference › Presentation › Research › peer-review

  53. Published

    Struktur - Eigenschaftsbeziehungen eines Ti - legierten PH 13-8 Mo Maraging Stahls

    Zivkovic, J., 2019

    Research output: Thesis › Master's Thesis

  54. Published

    Surface modifications on cathode during cathodic arc deposition: phase evaluation

    Golizadeh Najafabadi, M., Mendez Martin, F., Wurster, S., Kolozsvári, S. & Franz, R., 2019.

    Research output: Contribution to conference › Poster › Research

  55. Published

    Teilchenkontrolliertes Kornwachstum in γ-TiAl Hochtemperaturlegierungen für die Additive Fertigung

    Graf, G., 2019

    Research output: Thesis › Master's Thesis

  56. Published

    The Effect of Zirconium on Titanium Aluminides

    Schulz, B., 2019

    Research output: Thesis › Master's Thesis

  57. Published

    Thermally activated deformation mechanisms – High temperature nanoindentation on W-Re alloys

    Kappacher, J., Wurmshuber, M., Leitner, A., Kiener, D., Clemens, H. & Maier-Kiener, V., 2019.

    Research output: Contribution to conference › Poster › Research

  58. Published

    Thermally activated deformation processes in various materials studied by advanced nanoindentation experiments

    Maier-Kiener, V., 2019

    Research output: Thesis › Habilitation thesis › peer-review

  59. Published

    Thermal stability of nanolamellar fcc-Ti1-xAlxN grown by chemical vapor deposition

    Tkadletz, M., Hofer, C., Wüstefeld, C., Schalk, N., Motylenko, M., Rafaja, D., Holzschuh, H., Bürgin, W., Sartory, B., Mitterer, C. & Czettl, C., 2019, In: Acta Materialia. 174.2019, August, p. 195-205 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Thermo-mechanical fatigue testing of dual hardening tool steels

    Hofinger, M., Seisenbacher, B., Ognianov, M., Leitner, H., Turk, C., Kapp, M. & Schnitzer, R., 2019.

    Research output: Contribution to conference › Abstract

  61. Published

    The role of adhesion layers on the interfacial reliability of multilayer insulators

    Paulitsch, M., 2019

    Research output: Thesis › Master's Thesis

  62. Published

    The sputter performance of an industrial-scale planar Mo-target over ist lifetime: Target erosion and film properties

    Rausch, M., Sabag, A., Pichler, K.-H., Gruber, G., Köstenbauer, J., Köstenbauer, H., Kreiml, P., Cordill, M. J., Winkler, J. & Mitterer, C., 2019, In: Surface & coatings technology. 381.2020, 15 January, 14 p., 125174.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Three-Dimensional Integration of Power Electronic Devices Using Wafer Level Deposited Copper Sinter Paste

    Karner, S., 2019

    Research output: Thesis › Master's Thesis

  64. Published

    Tribological testing of leather surface coated with sputter-deposited Ti-Ag-O films

    Hofer-Roblyek, A., Rebelo de Figueiredo, M., Carvalho, I., Carvalho, S., Gaidau, C., Mitterer, C. & Franz, R., 2019, In: Tribology International. 137.2019, September, p. 59-65 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Ultrafine-grained Tungsten by High-Pressure Torsion – Bulk precursor versus powder processing route

    Wurmshuber, M., Doppermann, S., Wurster, S. & Kiener, D., 2019, IOP Conference Series: Materials Science and Engineering. Vol. 580. 012051

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Wear of WC/Co Cemented Carbides during Percussive Demolition

    Freisinger, M., 2019

    Research output: Thesis › Master's Thesis

  67. Published

    Werkstoffcharakterisierung additiv gefertigter Ti-6Al-4V Bauteile und Einfluss der Pulverherstellung

    Fleißner-Rieger, C., 2019

    Research output: Thesis › Master's Thesis

  68. Published

    Zyklisches Risswachstum in Hartmetallen: das Verhalten von natürlichen Defekten und langen Rissen

    Gettinger, C., 2019

    Research output: Thesis › Master's Thesis

  69. 2018
  70. Published

    Crack arrest in thin metallic film stacks due to material- and residual stress inhomogeneities

    Kozic, D., Gänser, H.-P., Brunner, R., Kiener, D., Antretter, T. & Kolednik, O., 31 Dec 2018, In: Thin solid films. p. 14-22 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. E-pub ahead of print

    Strengthening Effects in Nano-/Ultrafine-Grained Carbon Nanotube Reinforced-Titanium Composites Investigated by Finite Element Modeling

    Li, F., Hao, P., Yi, J., Prashanth, K. G., Maity, T. & Eckert, J., 23 Dec 2018, (E-pub ahead of print) In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 49.2018, 12, p. 6469-6478 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Impact of Nano-Scale distribution of atoms on electronic and magnetic properties of phases in Fe-Al nanocomposites: An ab initio study

    Mihalikova, I., Friák, M., Jiraskova, Y., Holec, D., Koutná, N. & Šob, M., 16 Dec 2018, In: Nanomaterials. 8.2018, 12, p. 1-15 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  73. E-pub ahead of print

    Quantum-mechanical study of nanocomposites with low and ultra-low interface energies

    Friák, M., Holec, D. & Šob, M., 15 Dec 2018, (E-pub ahead of print) In: Nanomaterials. 8.2018, 12, 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    An Ab Initio Study of Pressure-Induced Reversal of Elastically Stiff and Soft Directions in YN and ScN and Its Effect in Nanocomposites Containing These Nitrides

    Friák, M., Kroupa, P., Holec, D. & Šob, M., 14 Dec 2018, In: Nanomaterials. 8.2018, 12, 14 p., 1049.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Darstellung und Verifizierung einer elektrolytischen Ätzmethode zur Bestimmung ehemaliger Austenitkorngrenzen eines PH15-5 Stahls

    Brandl, D. C., Höfler, L., Stockinger, M., Ploberger, S., Marsoner, S. M. & Ressel, G., 14 Dec 2018, In: Praktische Metallographie/Practical Metallography. 55.2018, 12, p. 800-812 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. E-pub ahead of print

    Evolution of microstructure and mechanical properties of a grades TiAlON thin film investigated by cross-sectional characterization techniques

    Schalk, N., Tkadletz, M., Terziyska, V., Deluca, M., Letofsky-Papst, I., Keckes, J. & Mitterer, C., 14 Dec 2018, (E-pub ahead of print) In: Surface & coatings technology. 315.2019, February, p. 155-161 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Tuning structure and mechanical properties of Ta-C coatings by N-alloying and vacancy population

    Glechner, T., Mayrhofer, P. H., Holec, D., Fritze, S., Lewin, E., Paneta, V., Primetzhofer, D., Kolozsvári, S. & Riedl, H., 5 Dec 2018, In: Scientific reports (London : Nature Publishing Group). 8.2018, 11 p., 17669.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Ductile bulk metallic glass by controlling structural heterogeneities

    Scudino, S., Bian, J. J., Shakur Shahabi, H., Şopu, D., Sort, J., Eckert, J. & Liu, G., 1 Dec 2018, In: Scientific reports (e-only). 8.2018, 1, 12 p., 9174.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Factors controlling shale microstructure and porosity: A case study on Upper Visean Rudov Beds from the Ukrainian Dniepr-Donets Basin: A case study on upper visean rudov beds from the Ukrainian Dneiper-Donets Basin

    Misch, D., Klaver, J., Gross, D., Mayer-Kiener, V., Mendez-Martin, F., Schmatz, J. & Sachsenhofer, R. F., 1 Dec 2018, In: AAPG bulletin. 102, 12, p. 2629-2654 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Origin of large plasticity and multiscale effects in iron-based metallic glasses

    Sarac, B., Ivanov, Y. P., Chuvilin, A., Schöberl, T., Stoica, M., Zhang, Z. & Eckert, J., 1 Dec 2018, In: Nature Communications. 9.2018, 1, 10 p., 1333.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Co-Cr-Mo-C-B metallic glasses with wide supercooled liquid region obtained by systematic adjustment of the metalloid ratio

    Kim, J. T., Hong, S. H., Kim, Y. S., Park, H. J., Maity, T., Chawake, N. M., Prashanth, K. G., Park, J. M., Song, K. K., Wang, W. M., Eckert, J. & Kim, K. B., 24 Nov 2018, In: Journal of non-crystalline solids. 505.2019, 1 February, p. 310-319 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Removing the oxide layer in a nanostructured aluminum alloy by local shear deformation between nanoscale phases

    Wang, Z., Prashanth, K. G., Zhang, W. W., Scudino, S. & Eckert, J., 24 Nov 2018, In: Powder Technology. 343.2019, 1 February, p. 733-737 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Structural evolution of oxygen on the surface of TiAlN: Ab initio molecular dynamics simulations

    Guo, F., Wang, J., Du, Y., Holec, D., Ou, P., Zhou, H., Chen, L. & Kong, Y., 22 Nov 2018, In: Applied surface science. 470.2019, March, p. 520-525 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Sample Size and Strain-Rate-Sensitivity Effects on the Homogeneity of High-Pressure Torsion Deformed Disks

    Hohenwarter, A. & Pippan, R., 21 Nov 2018, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 50.2019, 2, p. 601-608 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Mechanical properties of the magnetocaloric intermetallic LaFe11.2Si1.8 alloy at different length scales

    Glushko, O., Funk, A., Maier-Kiener, V., Kraker, P., Krautz, M., Eckert, J. & Waske, A., 20 Nov 2018, In: Acta materialia. 165.2019, February, p. 40-50 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    An ab initio study of connections between tensorial elastic properties and chemical bonds in ∑5(210) grain boundaries in Ni3Si

    Friák, M., Zeleny, M., Všianská, M., Holec, D. & Šob, M., 13 Nov 2018, In: Materials letters. 11.2018, 11, 17 p., 2263.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Self-structuring in Zr1−xAlxN films as a function of composition and growth temperature

    Ghafoor, N., Petrov, I., Holec, D., Greczynski, G., Palisaitis, J., Persson, P. O. Å., Hultman, L. & Birch, J., 5 Nov 2018, In: Scientific reports (London : Nature Publishing Group). 8.2018, 17 p., 16327.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Synthesis, characterization and thermodynamic stability of nanostructured epsilon-iron carbonitride powder prepared by a solid-state mechanochemical route

    Rounaghi, S. A., Vanpoucke, D. E. P., Esmaeili, E., Scudino, S. & Eckert, J., 3 Nov 2018, In: Journal of alloys and compounds. 778.2019, 25 March, p. 327-336 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. E-pub ahead of print

    Impact of interfaces on the radiation response and underlying defect recovery mechanisms in nanostructured Cu-Fe-Ag

    Wurmshuber, M., Frazer, D., Bachmaier, A., Wang, Y., Hosemann, P. & Kiener, D., 1 Nov 2018, (E-pub ahead of print) In: Materials and Design. 160.2018, 15 December, p. 1148-1157 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Salt concentration and charging velocity determine ion charge storage mechanism in nanoporous supercapacitors: The original version of this Article contained an error in the Acknowledgements, which was incorrectly omitted from the end of the following: ‘The research leading to these results has received funding from the European Community’s Horizon 2020 Framework Programme under grant agreement nº 730872.’ This has been corrected in both the PDF and HTML versions of the Article.

    Prehal, C., Koczwara, C., Amenitsch, H., Presser, V. & Paris, O., 8 Oct 2018, In: Nature Communications. 9.2018, 1, 256.

    Research output: Contribution to journal › Comment/debate › peer-review

  91. Published

    Pressure-assisted sintering of Al-Gd-Ni-Co amorphous alloy powders

    Wang, Z., Prashanth, K. G. P., Surreddi, K. B., Suryanarayana, C., Eckert, J. & Scudino, S., 1 Oct 2018, In: Acta materialia. 2.2018, October, p. 157-166 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Understanding the tensile strength of ceramics in the presence of small critical flaws

    Martin, E., Leguillon, D., Sevecek, O. & Bermejo, R., 1 Oct 2018, In: Engineering Fracture Mechanics. 201, p. 167-175 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. E-pub ahead of print

    Metallurgical processing of titanium aluminides on industrial scale

    Güther, V., Allen, M., Klose, J. & Clemens, H., 26 Sept 2018, (E-pub ahead of print) In: Intermetallics. 103.2018, December, p. 12-22 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Mechanical properties of coal macerals: A nanoindentation study

    Vranjes-Wessely, S., Misch, D., Schöberl, T., Kiener, D., Groß, D. & Sachsenhofer, R., 25 Sept 2018.

    Research output: Contribution to conference › Abstract › peer-review

  95. Published

    Die Grenzen der Austenitrückkonstruktion eines mehrphasigen Stahles in unterschiedlichen Gefügemodifikationen

    Weißensteiner, I., Thomas, H., Clemens, H. & Maier-Kiener, V., 19 Sept 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 301-306 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. E-pub ahead of print

    Origin of the Low Magnetic Moment in Fe₂AlTi: An Ab Initio Study

    Friák, M., Slávik, A., Miháliková, I., Holec, D., Všianská, M., Šob, M., Palm, M. & Neugebauer, J., 14 Sept 2018, (E-pub ahead of print) In: Materials. 11.2018, 9, 10 p., 1732.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Author Correction: Origin of large plasticity and multiscale effects in iron-based metallic glasses: Erratum: Origin of large plasticity and multiscale effects in iron-based metallic glasses (Nature Communications, (2018), 9, 1, (1333), 10.1038/s41467-018-03744-5)

    Sarac, B., Ivanov, Y. P., Chuvilin, A., Schöberl, T., Stoica, M., Zhang, Z. & Eckert, J., 11 Sept 2018, In: Nature Communications. 9.2018, 1, 1 p., 3761.

    Research output: Contribution to journal › Comment/debate › peer-review

  98. Published

    Fracture mechanics of micro samples: Fundamental considerations

    Pippan, R., Wurster, S. & Kiener, D., 5 Sept 2018, In: Materials and Design. 159.2018, 5 December, p. 252-267

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Incipient plasticity and surface damage in LiTaO3 and LiNbO3 single crystals

    Gruber, M., Leitner, A., Kiener, D., Supancic, P. & Bermejo, R., 5 Sept 2018, In: Materials and Design. 153, p. 221-231 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Influence of secondary phase on intrinsic threshold and path of shear-mode fatigue cracks in metals

    Vojtek, T., Hohenwarter, A., Pippan, R. & Pokluda, J., 1 Sept 2018, In: Acta Physica Polonica A. 134.2018, 3, p. 699-702 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Effect of Deformation on a Composite of Cu and the Soft Magnetic Metallic Glass Fe73.9Cu1Nb3Si15.5B6.6

    Antoni, M., Pippan, R., Sarac, B., Ketov, S. V., Bachmaier, A., Polak, C., Spieckermann, F., Grössinger, R. & Eckert, J., Sept 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  102. E-pub ahead of print

    Structural and mechanical characterization of heterogeneities in a CuZr-based bulk metallic glass processed by high pressure torsion

    Ebner, C., Escher, B., Gammer, C., Eckert, J., Pauly, S. & Rentenberger, C., 30 Aug 2018, (E-pub ahead of print) In: Acta Materialia. 160.2018, November, p. 147-157 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...10 11 12 13 14 15 16 17 ...55 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9/1.UG, 8700 Leoben