Chair of Process Technology and Industrial Environmental Protection (500)
Organisational unit: Chair
Research output
- 2024
- Published
Optimizing the tunnel ventilation design related to respirable dust in tunnelling by using CFD
Wei, R., Galler, R. & Weiß, C., 29 May 2024.Research output: Contribution to conference › Paper › peer-review
- E-pub ahead of print
A sequential lumped kinetic modelling approach for the co-pyrolysis of plastic mixtures with a heavy refinery intermediate product in a tubular reactor
Lorbach, S-M., Lechleitner, A., Schubert, T. & Lehner, M., 10 Apr 2024, (E-pub ahead of print) In: Reaction chemistry & engineering.Research output: Contribution to journal › Article › Research › peer-review
- Published
High-capacity CO/CO2 methanation reactor design strategy based on 1D PFR modelling and experimental investigation
Krammer, A., Salbrechter, K. & Lehner, M., Feb 2024, In: Journal of CO2 utilization. 80.2024, February, 21 p., 102661.Research output: Contribution to journal › Article › Research › peer-review
- Published
Anreicherung von aus Trübwasser rückgewonnenem Ammonium zur Gewinnung eines ammoniakhaltigen Treibstoffs für Brennstoffzellen
Schobesberger, C., 2024Research output: Thesis › Master's Thesis
- Published
Entwicklung eines Kalkulationsmodells zur Berechnung des CO2-Fußabdrucks eines Betonzusatzstoffes
Butter, P., 2024Research output: Thesis › Master's Thesis
- Published
Entwicklung eines Teststandes zur Bestimmung der Permeabilität poröser Materialien in Protonenaustauschmembran-Elektrolyseuren
Rubasch, S., 2024Research output: Thesis › Master's Thesis
- Published
Experimentelle Untersuchung des Fluidisierungsverhaltens einer Glockendüse in einer Wirbelschichtversuchsanlage
Schlemmer, N., 2024Research output: Thesis › Master's Thesis
- Published
Modeling and simulation of the copper recycling from wastewater in AT&S
Notter, S., 2024Research output: Thesis › Master's Thesis
- 2023
- E-pub ahead of print
Feasibility of a Plasma Furnace for Methane Pyrolysis: Hydrogen and Carbon Production
Daghagheleh, O., Schenk, J., Zarl, M. A., Lehner, M., Farkas, M. & Zheng, H., 26 Dec 2023, (E-pub ahead of print) In: Energies. 17.2024, 1, 16 p., 167.Research output: Contribution to journal › Article › Research › peer-review
- Published
SUJECO - Sustainable Jetfuel from CO2
Ellersdorfer, M., 8 Nov 2023.Research output: Contribution to conference › Poster › Transfer
- Published
DEVELOPMENT OF AN ASSESSMENT METHOD FOR UNAMBIGUOUS VALIDATION OF MACHINE PERFORMANCE
Lasch, T., Khodier, K., Feyerer, C. & Sarc, R., Oct 2023, Proceedings SARDINIA 2023.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Possibilities for indirect measurement of throughput performance in solid waste shredding
Feyerer, C., Khodier, K., Lasch, T. & Sarc, R., Oct 2023, Proceedings SARDINIA 2023.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- E-pub ahead of print
Comparison and techno-economic evaluation of process routes for lower olefin production via Fischer–Tropsch and methanol synthesis
Markowitsch, C., Lehner, M. & Maly, M., 22 Sept 2023, (E-pub ahead of print) In: International Journal of Greenhouse Gas Control. 129.2023, October, 17 p., 103985.Research output: Contribution to journal › Article › Research › peer-review
- Published
Method development for characterisation of pre-shredding machines performance in waste treatment
Lasch, T. & Sarc, R., Sept 2023, Proceedings of the 18th Conference on Sustainable Development of Energy, Water and Environment Systems.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
The shredder as part of a Smart Waste Factory - The development of shredder technology
Lasch, T., Feyerer, C. & Sarc, R., Sept 2023.Research output: Contribution to conference › Poster › Transfer
- Published
Hydrogen intensified synthesis processes to valorise process off-gases in integrated steelworks
Matino, I., Dettori, S., Conde, A. S., Colla, V., Petrucciani, A., Zaccara, A., Iannino, V., Mocci, C., Hauser, A., Kolb, S., Karl, J., Wolf-Zöllner, P., Haag, S., Bampaou, M., Panopoulos, K., Heracleous, E., Kieberger, N., Rechberger, K., Rog, L. & Rompalski, P., 28 Aug 2023, In: Matériaux et techniques. 111.2023, 2, 14 p., 204.Research output: Contribution to journal › Article › Research › peer-review
- Published
Reactor and process design for hydrogen production in liquid metal bubble columns
Weiss, H., 10 Jul 2023.Research output: Contribution to conference › Poster › Research
- Published
Influence of various sorts of coke breeze on the off-gas composition during iron ore sintering
Eisbacher-Lubensky, J., Weiß, C., Wegscheider, S. & Brus, C., 14 Jun 2023. 8 p.Research output: Contribution to conference › Paper
- Published
Automated detection of loading and flooding points in packed columns
Haushofer, G., Schlager, M., Wolf-Zöllner, V. M. & Lehner, M., 8 Jun 2023, In: Transactions of the Institution of Chemical Engineers / A, Chemical engineering research and design . 196.2023, August, p. 61-70 10 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Direct ex-situ carbonation of minerals and secondary materials without the use of additives
Schinnerl, F., 13 Apr 2023.Research output: Contribution to conference › Paper › peer-review
- Published
Evaluation and Comparison of the Conventional and Renewable-based Polyolefin Production based on Greenhouse Gas Reduction
Markowitsch, C. & Lehner, M., 13 Apr 2023.Research output: Contribution to conference › Paper
- Published
Einfluss der Betriebsbedingungen auf die reverse Wasser Gas Shift Reaktion
Markowitsch, C. & Lehner, M., 12 Apr 2023.Research output: Contribution to conference › Poster › Research
- Published
Der Zerkleinerer als Teil einer Smart Waste Factory - Experimentelle Weiterentwicklung der Zerkleinerertechnologie
Lasch, T., Feyerer, C., Khodier, K. & Sarc, R., Apr 2023.Research output: Contribution to conference › Poster › Transfer
- Published
Evaluation of Process Structures and Reactor Technologies of an integrated Power-to-Liquid Plant at a Cement Factory
Markowitsch, C., Lehner, M. & Maly, M., Apr 2023, In: Journal of CO2 utilization. 70.2023, April, 14 p., 102449.Research output: Contribution to journal › Article › Research › peer-review
- E-pub ahead of print
Mass transfer model of packed seawater scrubbers for marine exhaust gas cleaning
Schlager, M., Baumfrisch, M., Haushofer, G., Wolf-Zöllner, V. & Lehner, M., 20 Feb 2023, (E-pub ahead of print) In: Chemical Engineering Research and Design. 192.2023, April, p. 128-140 13 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Critical comparison of experimental and computational fluid dynamic results for a sample introduction system in plasma spectrometry
Fasch, E., Maier, H., Landertshamer, F., Weiß, C., Prohaska, T. & Wegscheider, W., 1 Feb 2023.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Betrachtung von Aufbereitungsverfahren für das chemische Recycling von Kunststoffen
Kodon, E., 2023Research output: Thesis › Master's Thesis
- Published
Co-solid oxide electrolysis and methanation
Krammer, A. & Lehner, M., 2023, High-Temperature Electrolysis: From fundamentals to applications. IOP Publishing Ltd., p. 15-1 to 15-26 (2053-2563).Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
- Published
Elektromagnetische Feuchtemessung für mineralische Schüttgüter
Seidl, M., 2023Research output: Thesis › Master's Thesis
- Published
Experimentelle Untersuchung der Agglomeratbildung von Kupferpulver bei der Reduktion mit Wasserstoff
Recheis, R., 2023Research output: Thesis › Master's Thesis
- Published
Implementierung einer Regelung mit automatisierter Staupunktserkennung für eine Absorptionskolonne
Stocker, R., 2023Research output: Thesis › Master's Thesis
- Published
Inbetriebnahme und Optimierung einer Direkt-Membrandestillationsanlage im galvanischen Goldbeschichtungsprozess von Leiterplatten
Köck, P. A., 2023Research output: Thesis › Master's Thesis
- Published
Influence of coating parameters and calcination temperature on monolithic alumina supported nickel catalysts for methanation
Reiter, S., 2023Research output: Thesis › Master's Thesis
- Published
Lumped Kinetic Modeling of a Polyolefin Co-Pyrolysis Process
Lechleitner, A., 2023Research output: Thesis › Doctoral Thesis
- Published
Optimierung von Prozessparametern einer Brikettierpresse
Pop, A., 2023Research output: Thesis › Master's Thesis
- Published
Optimization and application of an analytic system for Al4C3 quantification in recycling material
Niedermayer, S. R., 2023Research output: Thesis › Doctoral Thesis
- Published
Vergleich impedanzspektroskopischer Methoden zur Leitfähigkeitsmessung an Schlackeschmelzen
Moll, S., 2023Research output: Thesis › Master's Thesis
- 2022
- Published
Experimental and numerical investigations of arc plasma expansion in an industrial vacuum arc remelting (VAR) process
Karimi-Sibaki, E., Peyha, M., Vakhrushev, A., Wu, M., Ludwig, A., Bohacek, J., Preiss, B. & Kharicha, A., Dec 2022, In: Scientific reports (e-only). 2022, 12, 14 p., 20405.Research output: Contribution to journal › Article › Research › peer-review
- Published
Recy & DepoTech 2022: Poster-Konferenzband zur 16. Recy & DepoTech-Konferenz
Pomberger, R. (ed.), Trieb, T., Adam, J. (ed.), Altendorfer, M. (ed.), Kandlbauer, L. (ed.), Nigl, T. (ed.), Sarc, R. (ed.), Sattler, T. M. (ed.), Viczek, S. A. (ed.), Bouvier-Schwarz, T. (ed.), Haslauer, P. (ed.), Khodier, K. (ed.), Koinig, G. (ed.), Kuhn, N. E. (ed.), Lasch, T., Mhaddolkar, N. (ed.), Rutrecht, B. (ed.), Schlögl, S. (ed.), Stipanovic, H. (ed.) & Tischberger-Aldrian, A. (ed.), 30 Oct 2022, 300 ed. Leoben. 464 p.Research output: Book/Report › Book › Transfer
- Published
Recy & DepoTech 2022: Vorträge-Konferenzband zur 16. Recy & DepoTech-Konferenz
Pomberger, R. (ed.), Trieb, T., Adam, J. (ed.), Altendorfer, M. (ed.), Kandlbauer, L. (ed.), Nigl, T. (ed.), Sarc, R. (ed.), Sattler, T. M. (ed.), Viczek, S. A. (ed.), Bouvier-Schwarz, T. (ed.), Haslauer, P. (ed.), Khodier, K. (ed.), Koinig, G. (ed.), Kuhn, N. E. (ed.), Lasch, T., Mhaddolkar, N. (ed.), Rutrecht, B. (ed.), Schlögl, S. (ed.), Stipanovic, H. (ed.) & Tischberger-Aldrian, A. (ed.), 30 Oct 2022, 300 ed. Leoben. 880 p.Research output: Book/Report › Book › Transfer
- Published
Tri-Reforming of Methane: Thermodynamics, Operating Conditions, Reactor Technology and Efficiency Evaluation—A Review
Soleimani, S. & Lehner, M., 28 Sept 2022, In: Energies : open-access journal of related scientific research, technology development and studies in policy and management. 15.2022, 19, 42 p., 7159.Research output: Contribution to journal › Article › Research › peer-review
- Published
Further Development of the Guideline for Standardized Characterization Measurements of Packed Columns
Triebl, A., Schlager, M., Haushofer, G., Wolf-Zoellner, V. & Lehner, M., 19 Sept 2022.Research output: Contribution to conference › Poster › Research
- Published
CHARACTERISATION OF A SAMPLE INTRODUCTION SYSTEM FOR PLASMA SPECTROMETRY BY COMPUTATIONAL FLUID DYNAMICS
Fasch, E., Maier, H., Landertshamer, F., Weiß, C., Prohaska, T. & Wegscheider, W., Sept 2022, ICP-MS AWT2022 LEOBEN-BOOK OF ABSTRACTS.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Application-based catalytic methanation of steelworks gases under dynamic operating conditions
Wolf-Zöllner, P., Lehner, M. & Kieberger, N., 14 Aug 2022, In: Journal of Cleaner Production. 371.2022, 15 October, 11 p., 133570.Research output: Contribution to journal › Article › Research › peer-review
- E-pub ahead of print
Determination of volumetric mass transfer coefficients of structured packings at two different column diameters
Schlager, M., Haushofer, G., Triebl, A. M., Wolf-Zoellner, V. & Lehner, M., 5 Aug 2022, (E-pub ahead of print) In: Chemical Engineering Research and Design. 186.2022, October, p. 462-472 21 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Economic Evaluation of Renewable Hydrogen Integration into Steelworks for the Production of Methanol and Methane
Bampaou, M., Panopoulos, K., Seferlis, P., Sasiain, A., Haag, S., Wolf-Zöllner, P., Lehner, M., Rog, L., Rompalski, P., Kolb, S., Kieberger, N., Dettori, S., Matino, I. & Colla, V., 24 Jun 2022, In: Energies. 15.2022, 13, 26 p., 4650.Research output: Contribution to journal › Article › Research › peer-review
- Published
Sektorübergreifende Nutzung von Zementwerks-CO2 zur produktion von Polyolefinen
Lehner, M. & Markowitsch, C., 23 Jun 2022, Energie aus Abfall. Thiel, S., Thomé-Kozmiensky, E., Quicker, P. & Gosten, A. (eds.). Neuruppin, Vol. 19. p. 266-279Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Valorizing Steelworks Gases by Coupling Novel Methane and Methanol Synthesis Reactors with an Economic Hybrid Model Predictive Controller
Hauser, A., Wolf-Zöllner, P., Haag, S., Dettori, S., Tang, X., Mighani, M., Matino, I., Mocci, C., Colla, V., Kolb, S., Bampaou, M., Panopoulos, K., Kieberger, N., Rechberger, K. & Karl, J., 16 Jun 2022, In: Metals. 12.2022, 6, 31 p., 1023.Research output: Contribution to journal › Article › Research › peer-review
- Published
2D heterogeneous model of a polytropic methanation reactor
Krammer, A., Peham, M. & Lehner, M., 27 May 2022, In: Journal of CO2 utilization. 62.2022, August, 17 p., 102059.Research output: Contribution to journal › Article › Research › peer-review
- Published
Optimizing methane and methanol production from integrated steelworks process off-gases through economic hybrid model predictive control
Dettori, S., Matino, I., Iannino, V., Colla, V., Hauser, A., Wolf-Zöllner, P. & Haag, S., 5 May 2022.Research output: Contribution to conference › Paper
