Chair of Physical Metallurgy (420)

Organisational unit: Chair

651 - 700 out of 2,174Page size: 50

Research output

  1. 2016
  2. Published

    Computertomographie und deren Anwendung in der Schadensanalytik

    Panzenböck, M., Borchert, M. & Freitag, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  3. Published

    Computertomographie und deren Anwendung in der Schadensanalytik

    Panzenböck, M., Borchert, M. & Freitag, C., 2016, Sonderband der Praktischen Metallographie: Fortschritte in der Metallographie. Vol. 48. p. 125-130 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Contribution of Free Surface and Dislocation Density to the Strength Scaling Behaviour in Ultrafine-grained BCC Chromium

    Fritz, R., Leitner, A., Maier-Kiener, V. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    Controlling microstructure, preferred orientation, and mechanical properties of Cr-Al-N by bombardment and alloying with Ta

    Hollerweger, R., Zhou, L., Holec, D., Koller, C., Rachbauer, R., Polcik, P. & Mayrhofer, P. H., 2016, In: Journal of applied physics. 119, p. 1-8 8 p., 119.

    Research output: Contribution to journal › Article › Research

  6. Published

    Correlative microscopy of a carbide-free bainitic steel

    Hofer, C., Bliznuk, V., Verdiere, A., Petrov, R., Winkelhofer, F., Clemens, H. & Primig, S., 2016, In: Micron. 81, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Correlative study of grain boundary segregation in sintered molybdenum alloys

    Lutz, D., Leitner, K., Huber, K., Lorich, A., Maier-Kiener, V. & Clemens, H., 2016.

    Research output: Contribution to conference › Presentation › Research

  8. Published

    Cross-sectional structure-property relationship in a graded nanocrystalline Ti1-xAlxN thin film

    Zalesak, J., Bartosik, M., Daniel, R., Mitterer, C., Krywka, C., Kiener, D., Mayrhofer, P. H. & Keckes, J., 2016, In: Acta materialia. 102, p. 212-219 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Deformation in the y-Mg17Al12 phase at 25-278 °C

    Mathur, H. N., Maier-Kiener, V. & Korte, S., 2016, In: Acta materialia. 113, p. 221-229 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Design of multilayer metallization to reduce mechanical loading: Effect of growth conditions on interface stability and thermo-mechanical properties of sputtered Cu films on Si with and without WTi barrier layers

    Souli, I., Terziyska, V., Keckes, J., Zechner, J. & Mitterer, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  11. Published

    Die Rolle der Metallographie bei der Charakterisierung von Hochleistungswerkstoffe

    Mayer, S., Rashkova, B., Mendez Martin, F., Primig, S., Panzenböck, M. & Clemens, H., 2016, In: Jahresmagazin Materialographie, Metallographie : Ingenieurwissenschaften ... : im Fokus. 2016, p. 82-87 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Diffusion Studies in the TiN/Cu Bilayer System and Beyond

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Greczynski, G., Lu, J., Schalk, N., Hultman, L. & Mitterer, C., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  13. Published

    Does dynamic nanoindentation testing influence the acquired mechanical properties?

    Leitner, A., Cordill, M. J., Maier-Kiener, V. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  14. Published

    Dynamic indentation testing: Is there an influence on mechanical properties?

    Leitner, A., Cordill, M. J., Maier-Kiener, V. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  15. Published

    Effect of different bainite morphologies on the formability of advanced high strength steels

    Weißensteiner, I., Hebesberger, T. & Clemens, H., 2016.

    Research output: Contribution to conference › Poster › Research

  16. Published

    Einfluss von Aluminium auf die Karbidbildung im Schnellarbeitsstahl

    Kellezi, G., Leitner, H. & Clemens, H., 2016, In: Berg- und hüttenmännische Monatshefte : BHM. 161, 3, p. 108-115 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Einfluss von Bor auf die Mikrostruktur hoch-stickstoffhaltiger Stähle

    Mangelberger, M. A., 2016, 116 p.

    Research output: Thesis › Diploma Thesis

  18. Published

    Einfluss von Kobalt auf die mechanisch-technologischen Eigenschaften in Kaltarbeitsstählen

    Neunteufel, C., 2016

    Research output: Thesis › Diploma Thesis

  19. Published

    Electro-Mechanical Behaviorof Single and Multilayer Metal Thin Films on Polymer Substrates

    Jörg, T., Cordill, M., Franz, R., Kirchlechner, C., Winkler, J. & Mitterer, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  20. Published

    Electro-Mechanical Response of Sputter-Deposited Mo Thin Films for Back Contacts in CIGS Flexible Solar Cells

    Jörg, T., Cordill, M. J., Franz, R. & Mitterer, C., 2016.

    Research output: Contribution to conference › Poster › Research

  21. Published

    Energy consumption and material fluxes in hard coating deposition processes

    Gassner, M., Rebelo De Figueiredo, M., Schalk, N., Franz, R., Weiß, C., Rudigier, H., Holzschuh, H., Bürgin, W., Pohler, M., Czettl, C. & Mitterer, C., 2016, In: Surface & coatings technology. 299, p. 49-55 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Entwicklung eines Herstellprozesses für Turbinenschaufeln aus einer intermetallischen γ-TiAl Legierung

    Huber, D., 2016

    Research output: Thesis › Doctoral Thesis

  23. Published

    Erosion behavior of composite Al-Cr cathodes in cathodic arc plasmas in inert and reactive atmospheres

    Franz, R., Mendez Martin, F., Hawranek, G. & Polcik, P., 2016, In: Journal of vacuum science & technology / A (JVST). Vol. 34, No. 2, p. 1-8 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Evolution of Microstructure and Mechanical Properties of a High Co-Ni Steel

    Gruber, M., 2016

    Research output: Thesis › Doctoral Thesis

  25. Published

    Evolution of strain-induced hafnium carbides in a molybdenum base MoeHfeC alloy studied by small-angle neutron scattering and complementary methods

    Lang, D., Karge, L., Schatte, J., Gilles, R., Dallinger, R., Weißensteiner, I., Staron, P., Knabl, W., Primig, S. & Clemens, H., 2016, In: Journal of alloys and compounds. 688, p. 619-631 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Evolution of structure, stresses and mechanical properties of a fcc/hex-AlCrN multilayer system upon thermal loading revealed by cross-sectional X-ray nanodiffraction and micromechanical testing

    Jäger, N., Klima, S., Hruby, H., Mitterer, C., Keckes, J. & Daniel, R., 2016.

    Research output: Contribution to conference › Poster › Research

  27. Published

    Evolution of texture and microstructure in multi-phase TNM sheets during hot rolling and subsequent heat treatments

    Erdely, P., Staron, P., Maawad, E., Schell, N., Güther, V., Rothe, C., Klose, J., Clemens, H. & Mayer, S., 2016. 1 p.

    Research output: Contribution to conference › Poster › Research

  28. Published

    Experimental and theoretical evidence of displacive martensite in an intermetallic Mo-containing Ƴ-TiAl based alloy

    Mayer, S., Petersmann, M., Fischer, F. D., Clemens, H., Waitz, T. & Antretter, T., 2016, In: Acta materialia. 115, p. 242-249 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Failure of Mountain-Anchors as a Consequence of Hydrogen Embrittlement

    Panzenböck, M. & Freitag, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  30. Published

    Few-layer graphene-like flakes derived by plasma treatment: A potential material for hydrogen adsorption and storage

    Kostoglou, N., Tarat, A., Walters, I., Ryzhkov, V., Tampaxis, C., Charalambopoulou, G., Steriotis, T., Mitterer, C. & Rebholz, C., 2016, In: Microporous and Mesoporous Materials. 225, p. 482-487 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Few-step synthesis, thermal purification and structural characterization of porous boron nitride nanoplatelets

    Kostoglou, N., Lukovic, J., Babic, B., Matovic, B., Photiou, D., Constantinides, G., Polychronopoulou, K., Ryzhkov, V., Großmann, B., Mitterer, C. & Rebholz, C., 2016, In: Materials & design. 110, p. 540-548 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Finite element study of the influence of hard coatings on hard metal tool loading during milling

    Krajinovic, I., Daves, W., Tkadletz, M., Teppernegg, T., Klünsner, T., Schalk, N., Mitterer, C., Tritremmel, C., Ecker, W. & Czettl, C., 2016, In: Surface & coatings technology. 304, p. 134-141 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    First principles studies on the impact of point defects on the phase stability of (AlxCr1−x)2O3 solid solutions

    Koller, C., Koutna, N., Ramm, J., Kolozsvari, S., Paulitsch, J., Holec, D. & Mayrhofer, P. H., 2016, In: AIP Advances. 6, p. 025002-2 - 025002-9 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Forged Intermetallic γ-TiAl Based Alloy Low Pressure Turbine Blade in the Geared Turbofan

    Habel, U., Heutling, D., Kunze, C., Smarsly, W., Das, G. & Clemens, H., 2016, 13th World Conference on Titanium. USA, p. 1223–1227 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Fracture and Material Behavior of Thin Film composites

    Kozic, D., Konetschnik, R., Maier-Kiener, V., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2016, 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) . Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Fracture Behavior and Delamination Toughening of Molybdenum in Charpy Impact Tests

    Leitner, K., Primig, S., Knabl, W., Lorich, A., Stickler, R. & Clemens, H., 2016, In: JOM. 68, 11, p. 2854-2863 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    High resolution imaging of martensitic all-weld metal

    Haslberger, P., Ernst, W. & Schnitzer, R., 2016.

    Research output: Contribution to conference › Presentation › Research

  38. Published

    Hydrogen adsorption properties of a nanoporous carbon cloth-like material derived by carbonization & activation of a cellulose-based polymer

    Kostoglou, N., Babic, B., Matovic, B., Tampaxis, C., Charalambopoulou, G., Steriotis, T., Hinder, S., Baker, M. A., Constantinides, G., Mitterer, C. & Rebholz, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  39. Published

    Impact of the B2 ordering behavior on the mechanical properties of a Fe Co Mo alloy

    Turk, C., Leitner, H., Kellezi, G., Clemens, H., Gan, W., Staron, P. & Primig, S., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 662, p. 511-518 8 p., 662.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Improved ductility and toughness of a Fe-Co-Mo alloy

    Turk, C., Kellezi, G., Schemmel, I., Leitner, H. & Clemens, H., 2016, 10th TOOL Conference 2016 – Tool 2016 – DoubleTree by Hilton Hotel Bratislava. p. 112-129 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Improvement of oxidation and corrosion resistance of Mo thin films by alloying with Ta

    Hofer-Roblyek, A. M., Mori, G., Fian, A., Winkler, J. & Mitterer, C., 2016, In: Thin solid films. 599, p. 1-6 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Influence of Free Surface on the Deformation Behaviour of ufg Chromium at Ambient & Elevated Temperatures

    Fritz, R., Leitner, A., Maier-Kiener, V. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  43. Published

    Influence of impurities on the fracture behavior of molybdenum-hafnium alloys

    Babinsky, K., Primig, S., Knabl, W., Lorich, A. & Clemens, H., 2016.

    Research output: Contribution to conference › Presentation › Research

  44. Published

    Influence of oxygen impurities on growth morphology, structure and mechanical properties of Ti–Al–N thin films

    Riedl, H., Munnik, F., Hutter, H., Mendez Martin, F., Kolozsvari, S., Bartosik, M., Mayrhofer, P. H., Koller, C. & Rachbauer, R., 2016, In: Thin solid films. 603, p. 39-49 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Influence of varying nitrogen partial pressures on microstructure, mechanical and optical properties of sputtered TiAlON coatings

    Schalk, N., Simonet Fotso, J., Holec, D., Jakopic, G., Fian, A., Terziyska, V., Daniel, R. & Mitterer, C., 2016, In: Acta materialia. 119, p. 26-34 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    In-situ Methods to Study the Electro-Mechanical Properties of Mo Thin Films on Polymer Substrates

    Jörg, T., Cordill, M., Franz, R., Glushko, O., Winkler, J. & Mitterer, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  47. Published

    Interface controlled microstructure evolution in nanolayered thin films

    Bartosik, M., Keckes, J., Persson, P. O. Å., Riedl, H. & Mayrhofer, P. H., 2016, In: Scripta materialia. 123, p. 13-16 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Interface dominated mechanical properties of ultra-fine grained and nanoporous Au at elevated temperatures

    Leitner, A., Maier-Kiener, V., Jeong, J., Abad, M. D., Hosemann, P., Oh, S. H. & Kiener, D., 2016, In: Acta materialia. 121.2016, December, p. 104-116 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Interface induced electronic structure toughening of nitride bilayers and superlattices

    Holec, D., Rehák, P. & Cerny, M., 2016.

    Research output: Contribution to conference › Presentation › Research

  50. Published

    Intermetallic titanium aluminides in aerospace applications – processing, microstructure and properties

    Clemens, H. & Mayer, S., 2016, In: Materials at High Temperatures. 33, p. 560-570 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Investigation of the thermal stability of metastable Ti1-xAlxN hard coatings

    Großmann, B., Schalk, N., Czettl, C., Pohler, M. & Mitterer, C., 2016.

    Research output: Contribution to conference › Poster › Research

Previous 1...10 11 12 13 14 15 16 17 ...44 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben