Chair of Physical Metallurgy (420)

Organisational unit: Chair

1 - 100 out of 2,174Page size: 100

Research output

  1. 2025
  2. Published

    Metastable AlB2 structured TM-Si-B2±z (TM = Ti, Zr, Hf) solid solutions from first-principles

    Gutschka, C., Zauner, L., Glechner, T., Holec, D. & Riedl, H., 4 Mar 2025, In: Acta materialia. 289.2025, 1 May, 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Precipitation and growth behavior of β0 phase in the α2/γ lamellar colonies of an intermetallic Ti-43.5Al-4Nb-1Mo-0.1B alloy

    Zhang, W., Li, H., Hu, Z., Liang, Y., Yang, J., Si, Z., Clemens, H., Scheu, C., Dehm, G. & Cha, L., 1 Mar 2025, In: Journal of alloys and compounds. 1020.2025, 15 March, 10 p., 179381.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Correlating grain boundary character and composition in 3-dimensions using 4D-scanning precession electron diffraction and atom probe tomography

    Das, S. M., Harrison, P., Srikakulapu, K., Zhou, X., Ludwig, W., Rauch, E. F., Herbig, M. & Liebscher, C., 28 Feb 2025, In: Small Methods. 2025, 10 p., 2401650.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Extrinsic and intrinsic strength of amorphous olivine films

    Jarnot, J., Dohmen, R., Trost, C. O. W., Mitterer, C., Cordier, P. & Glushko, O., 25 Feb 2025, In: European journal of mineralogy. 37.2025, 1, p. 91-99 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Effect of tramp elements on the microstructural evolution of a ferritic-pearlitic steel

    Hatzenbichler, L., Vincely, C., Haslberger, P., Galler, M., Glushko, O., Holec, D., Clemens, H. & Schnitzer, R., 21 Feb 2025, In: Practical metallography = Praktische Metallographie. 62.2025, 3, p. 148-175 28 p.

    Research output: Contribution to journal › Article › Research

  7. Published

    Harvesting superior intrinsic plasticity in nitride ceramics with negative stacking fault energy

    Huang, Y., Chen, Z., Meindlhumer, M., Hahn, R., Holec, D., Leiner, T., Maier-Kiener, V., Zheng, Y., Zhang, Z., Hatzenbichler, L., Riedl, H., Mitterer, C. & Zhang, Z., 23 Jan 2025, In: Acta Materialia. 286.2025, 1 March, 15 p., 120774.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Ab-initio grain boundary thermodynamics beyond the dilute limit

    Spitaler, T., Scheiber, D., Dösinger, C. A., Hodapp, M. & Romaner, L., 14 Jan 2025, In: Acta materialia. 286.2025, 1 March, 13 p., 120725.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Synergistic precipitation reactions in a novel high-temperature Ti-alloy

    Farabi, E., He, X., Obersteiner, D., Musi, M., Neves, J., Klein, T. & Primig, S., 9 Jan 2025, In: Scripta materialia. 259.2025, 1 April, 7 p., 116543.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Accurate prediction of structural and mechanical properties on amorphous materials enabled through machine-learning potentials: A case study of silicon nitride

    Nayak, G. K., Srinivasan, P., Todt, J., Daniel, R., Nicolini, P. & Holec, D., 6 Jan 2025, In: Computational materials science. 249.2025, 5 February, 11 p., 113629.

    Research output: Contribution to journal › Article › Research › peer-review

  11. 2024
  12. Published

    Influence of increasing chromium content on additively manufactured tool steels: Microstructural and mechanical evolution before and after heat treatment

    Ofner, N., Bodner, S., Kunnas, P., Asci, A., Kutlesa, K., Stark, A., Höbenreich, P., Aumayr, C., Wu, L., Turk, C., Keckes, J. & Meindlhumer, M., 21 Dec 2024, In: Journal of Materials Research and Technology. 34.2025, January-February, p. 2715-2727 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Microstructural insights into the coarse‑grained heat‑affected zone of a high‑strength all‑weld metal: Development of a continuous cooling transformation diagram

    Schrittwieser, D., Marin Morales, D., Pahr, H., Lumper-Wimler, L., Glushko, O. & Schnitzer, R., 18 Dec 2024, In: Welding in the world. 69.2025, March, p. 813-823 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    On the impact of nitrogen and aluminum doping on silicon carbide polytype stability: Insights from first principle calculations

    Rajabzadeh, Z., Hammer, R. & Romaner, L., 10 Dec 2024, In: Journal of the American Ceramic Society. 108.2024, 4, 9 p., e20284.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Site-specific femtosecond laser ablation: The pathway to high-throughput atom probe tomography characterization

    Tang, J., Renk, O. & Tkadletz, M., 6 Dec 2024, In: Materials characterization. 219.2025, January, 8 p., 114618.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Magnetic moments in CrN-based systems are robust: An ab initio study of alloys and superlattices

    Matas, M., Mayrhofer, P. H. & Holec, D., 23 Nov 2024, In: Surface & coatings technology. 496.2025, 15 January, 8 p., 131540.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Descriptors based on the density of states for efficient machine learning of grain-boundary segregation energies

    Dösinger, C. A., Hammerschmidt, T., Peil, O. E., Scheiber, D. & Romaner, L., 13 Nov 2024, In: Computational materials science. 247.2025, 31 January 2025, 10 p., 113493.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Revealing the embrittlement phenomena after post-weld heat treatment of high-strength weld metal using high-resolution microscopy

    Schrittwieser, D., Pahr, H., Musi, M., Landefeld, A., Glushko, O. & Schnitzer, R., 21 Oct 2024, In: Journal of Materials Research and Technology. 33.2024, November-December, p. 5289-5298 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Strong high-density composites from wheat straw

    Neudecker, F., Veigel, S., Bodner, S., Keckes, J., Duchoslav, J., Stifter, D. & Gindl-Altmutter, W., 18 Oct 2024, In: Composites Part A: Applied Science and Manufacturing. 188.2025, January, 11 p., 108533.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Severe plastic deformation for producing superfunctional ultrafine-grained and heterostructured materials: An interdisciplinary review

    Edalati, K., Ahmed, A. Q., Akrami, S., Ameyama, K., Aptukov, V., Asfandiyarov, R. N., Ashida, M., Astanin, V., Bachmaier, A., Beloshenko, V. A., Bobruk, E. V., Bryła, K., Cabrera, J. M., Carvalho, A. P., Chinh, N. Q., Choi, I.-C., Chulist, R., Cubero-Sesin, J. M., Davidan, G. & Demirtas, M. & 102 others, Divinski, S., Durst, K., Dvorak, J., Edalati, P., Emura, S., Enikeev, N. A., Faraji, G., Figueiredo, R. B., Floriano, R., Fouladvind, M., Fruchart, D., Fuji, M., Fujiwara, H., Gajdics, M., Gheorghe, D., Gondek, L., González-Hernández, J. E., Gornakova, A., Grosdidier, T., Gubicza, J., Gunderov, D., He, L., Higuera, O. F., Hirosawa, S., Hohenwarter, A., Horita, Z., Horky, J., Huang, Y., Huot, J., Ikoma, Y., Ishihara, T., Ivanisenko, J., Jang, J.-I., Jorge Jr, A. M., Kawabata-Ota, M., Kawasaki, M., Khelfa, T., Kobayashi, J., Kommel, L., Korneva, A., Král, P., Kudriashova, N., Kuramoto, S., Langdon, T. G., Lee, D.-H., Levitas, V. I., Li, C., Li, H.-W., Li, Y., Li, Z., Lin, H.-J., Liss, K.-D., Liu, Y., Cardona, D. M., Matsuda, K., Mazilkin, A., Mine, Y., Miyamoto, H., Moon, S.-C., Müller, T., Munoz, J. A., Murashkin, M. Y., Naeem, M., Novelli, M., Olasz, D., Pippan, R., Popov, V. V., Popova, E. N., Purcek, G., de Rango, P., Renk, O., Retraint, D., Révész, Á., Roche, V., Rodriguez-Calvillo, P., Romero-Resendiz, L., Sauvage, X., Sawaguchi, T., Sena, H., Shahmir, H., Shi, X., Sklenicka, V., Skrotzki, W., Skryabina, N., Staab, F., Straumal, B. B., Sun, Z., Szczerba, M., Takizawa, Y., Tang, Y., Valiev, R. Z., Vozniak, A., Voznyak, A., Wang, B., Wang, J. T., Wilde, G., Zhang, F., Zhang, M., Zhang, P., Zhou, J., Zhu, X. & Zhu, Y. T., 15 Oct 2024, In: Journal of alloys and compounds. 1002.2024, 15 October, 150 p., 174667.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Enhanced thermomechanical fatigue resistance in W10Re alloys: Microstructural and surface engineering approaches

    Sommerauer, M., Seligmann, B., Gottlieb, H., Hohenwarter, A., You, J.-H., Bostrom, N., Pippan, R., Siller, M. & Maier-Kiener, V., 11 Oct 2024, In: Nuclear Materials and Energy. 41.2024, December, 11 p., 101769.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Machine learning assisted calibration of PVT simulations for SiC crystal growth

    Taucher, L., Ramadan, Z., Hammer, R., Obermüller, T., Auer, P. & Romaner, L., 10 Oct 2024, In: CrystEngComm. 44.2024, 26, p. 6322-6335 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Linear volumetric additive manufacturing of zirconia from a transparent photopolymerizable ceramic slurry via Xolography

    Sänger, J. C., König, N. F., De Marzi, A., Zocca, A., Franchin, G., Bermejo, R., Colombo, P. & Günster, J., Sept 2024, In: Open ceramics. 19, 100655.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Tensile strength prediction of steel sheets: An insight into data-driven models, dimensionality reduction, and feature importance

    Millner, G., Mücke, M., Romaner, L. & Scheiber, D., 24 Aug 2024, In: Modelling and simulation in materials science and engineering. 32.2024, 7, 23 p., 075004.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Microstructure evolution and mechanical properties of a lamellar AlCoCrFeNi2.1 eutectic high-entropy alloy processed by high-pressure torsion

    Zhang, Z., Fellner, S., Hohenwarter, A., Renk, O., Huang, Y., Chen, Z., Song, K., Li, C., Gammer, C. & Eckert, J., 23 Aug 2024, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 914.2024, November, 12 p., 147139.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Novel Fe-Mo intermetallic composite synthesized via diffusional-displacive mixed-mode transformation

    Varanasi, R. S., Srikakulapu, K., Utsumi, R., Saitoh, H., Schnitzer, R., Akiyama, E. & Koyama, M., 18 Aug 2024, In: Materials characterization. 216.2024, October, 10 p., 114287.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Grain boundary segregation for the Fe-P system: Insights from atomistic modeling and Bayesian inference

    Reichmann, A., Tuchinda, N., Dösinger, C. A., Scheiber, D., Razumovskiy, V. I., Peil, O. E., Matson, T. P., Schuh, C. A. & Romaner, L., 26 Jul 2024, In: Acta materialia. 279.2024, 15 October, 11 p., 120215.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    State-of-the-art and future directions of fs-laser assisted specimen preparation techniques for atom probe tomography measurements

    Tkadletz, M., Schiester, M., Renk, O. & Schalk, N., 24 Jul 2024, In: Microscopy and microanalysis. 30.2024, Supplement 1, p. 89-90 2 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Hydrogen penetration into the NiTi superelastic alloy investigated in-situ by synchrotron diffraction experiments

    Weiser, A., Todt, J., Holcova, J., Zalezak, T., Paulik, A., Holec, D., Jary, M., Zobac, O., Mrazek, J., Frenzel, J., Keckes, J. & Dlouhý, A., 23 Jul 2024, In: Acta materialia. 277.2024, 15 September, 11 p., 120217.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Ab initio framework for deciphering trade-off relationships in multicomponent alloys

    Moitzi, F., Romaner, L., Ruban, A. V., Hodapp, M. & Peil, O. E., 16 Jul 2024, In: npj computational materials. 2024, 10, 16 p., 152.

    Research output: Contribution to journal › Article › Research › peer-review

  31. E-pub ahead of print

    Comparative analysis of experimental techniques for microstructural characterization of novel nanostructured aluminium alloys

    Willenshofer, P., Santa Rosa Coradini, D., Renk, O., Uggowitzer, P., Tunes, M. A. & Pogatscher, S., 11 Jul 2024, (E-pub ahead of print) In: Materials characterization. 215.2024, September, 8 p., 114154.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    How to catch a shear band and explain plasticity of metallic glasses with continuum mechanics

    Glushko, O., Pippan, R., Şopu, D., Mitterer, C. & Eckert, J., 3 Jul 2024, In: Nature Communications. 2024, 15, 11 p., 5601.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Possible charge ordering and anomalous transport in graphene/graphene quantum dot heterostructure

    Roy, R., Holec, D., Michal, L., Hemzal, D., Sarkar, S., Kumar, G. S., Nečas, D., Dhankhar, M., Kaushik, P., Gómez, I. J. & Zajíčková, L., 3 Jul 2024, In: Journal of physics (Condensed matter). 2024, 36, 12 p., 265601.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Unveiling the mechanism of deformation‑induced supersaturation

    Kormout, K. S., Romaner, L., Scheiber, D., Zeiler, S., Pippan, R. & Bachmaier, A., 2 Jul 2024, In: Scientific reports. 2024, 14, 7 p., 15247.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Refined cyclic R-curve determination through residual crack tip stress reduction by annealing

    Walch, L., Klünsner, T., Ressel, G., Marsoner, S. M., Pippan, R., Hackl, A., Leitner, H. & Hohenwarter, A., 27 Jun 2024, In: International Journal of Fatigue. 187.2024, October, 108480.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    High-Throughput First-Principles Calculations and Machine Learning of Grain Boundary Segregation in Metals

    Scheiber, D., Razumovskiy, V. I., Peil, O. E. & Romaner, L., 21 Jun 2024, In: Advanced engineering materials. 26.2024, 19, 18 p., 2400269.

    Research output: Contribution to journal › Article › Research › peer-review

  37. E-pub ahead of print

    A new approach for in situ electrochemical nanoindentation: Side charging as a promising alternative

    Zeiler, S., Jelinek, A., Terziyska, V., Schwaiger, R., Mitterer, C., Brinckmann, S. & Maier-Kiener, V., 14 Jun 2024, (E-pub ahead of print) In: Acta materialia. 276.2024, 1 September, 9 p., 120113.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Saturation of grain fragmentation upon severe plastic Deformation: Fact or fiction?

    Renk, O., Hohenwarter, A., Edalati, K. & Kapp, M. W., 14 Jun 2024, In: Advanced engineering materials. 26.2024, 19, 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Materials science-based guidelines to develop robust hard thin film materials

    Mayrhofer, P. H., Clemens, H. & Fischer, F.-D., 3 Jun 2024, In: Progress in materials science. 146.2024, December, 57 p., 101323.

    Research output: Contribution to journal › Review article › peer-review

  40. Published

    Ab initio study of oxygen vacancy filament formation at Ta/HfO2 interface

    Zhang, D., Wang, J., Wu, Q., Du, Y. & Holec, D., Jun 2024, In: Surfaces and Interfaces. 49.2024, June, 11 p., 104418.

    Research output: Contribution to journal › Article › Research › peer-review

  41. E-pub ahead of print

    Nanocomposite versus solid solution formation in the TiSiN system

    Schalk, N., Moritz, Y., Nayak, G. K., Holec, D., Hugenschmidt, C., Burwitz, V. V., Mathes, L., Schiester, M., Saringer, C., Czettl, C., Pohler, M., Mitterer, C. & Tkadletz, M., 30 May 2024, (E-pub ahead of print) In: Acta materialia. 275.2024, 15 August, 10 p., 120063.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Interplay between alloying and tramp element effects on temper embrittlement in bcc iron: DFT and thermodynamic insights

    Reiners-Sakic, A., Schnitzer, R. & Holec, D., 27 May 2024, In: Acta materialia. 275.2024, 15 August, 12 p., 120044.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Predictive Model for Catalytic Methane Pyrolysis

    Pototschnig, U., Matas, M., Scheiblehner, D., Neuschitzer, D., Obenaus-Emler, R., Antrekowitsch, H. & Holec, D., 25 May 2024, In: Journal of physical chemistry C (C, Nanomaterials and interfaces). 128.2024, 22, p. 9034-9040 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Design and characterization of novel Zr-Al-Fe-Y metallic glasses with nanoscale phase separation

    Singh, D., Parthiban, R., Jelinek, A., Bhattacharya, R., Chen, Z., Fellner, S., Gammer, C., Zhang, Z. & Eckert, J., May 2024, In: Materialia. 34.2024, May, 7 p., 102104.

    Research output: Contribution to journal › Article › Research › peer-review

  45. E-pub ahead of print

    Peculiarity of hydrogen absorption in duplex steels: Phase-selective lattice swelling and stress evolution

    Pogrielz, T., Eichinger, M., Weiser, A., Todt, J., Hohenwarter, A., Ascii, A., Sarac, B., Brandl, D., Ressel, G., Jary, M., Dlouhý, A., Mori, G. K. & Keckes, J., 27 Apr 2024, (E-pub ahead of print) In: Scripta Materialia. 248.2024, 15 July, 7 p., 116142.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Effect of Nb incorporation in Mo2BC coatings on structural and mechanical properties—Ab initio modelling and experiment

    Zenisek, J., Soucek, P., Ondračka, P., Czigány, Z., Buršíková, V., Holec, D., Balazsi, K. & Vasina, P., 15 Apr 2024, In: Acta materialia. 268.2024, 15 April, 12 p., 119741.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Structure–Property Relations in Pb-Supersaturated Metastable Sn-Rich Pb-Sn Alloys

    Friák, M., Cipek, P., Pavlu, J., Zobac, O., Roupcova, P., Miháliková, I., Holec, D., Msallamova, S. & Michalcova, A., 4 Apr 2024, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 55.2024, June, p. 1867-1877 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Elucidating effects of Eu and P on solidification and precipitation of Al-7Si-0.3Mg based alloys refined by Ta and TiB2

    Spáčil, I., Gehringer, D., Holec, D., Albu, M. & LI, J., 25 Mar 2024, In: Journal of alloys and compounds. 978.2024, 25 March, 16 p., 173343.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Effect of intercritical annealing on the microstructure and mechanical properties of a PH 13-8 Mo maraging steel

    Rosenauer, A., Teusl, S., Landefeld, A., Brandl, D., Ressel, G., Hönigmann, T., Stadler, M., Turk, C., Maawad, E., Stockinger, M. & Schnitzer, R., Mar 2024, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 895.2024, March, 13 p., 146220.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Hydrogen trapping in mixed carbonitrides

    Hammer, P., Romaner, L. & Razumovskiy, V. I., 10 Feb 2024, In: Acta materialia. 268.2024, 15 April, 18 p., 119754.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Multiscale in-situ observations of the micro- and nanostructure of a PH 13-8 Mo maraging steel during austenitization

    Rosenauer, A., Brandl, D., Ressel, G., Hönigmann, T., Stadler, M., Turk, C., Gammer, C., Wiessner, M., Gamsjäger, E., Stockinger, M. & Schnitzer, R., Feb 2024, In: Materials characterization. 208.2024, February, 13 p., 113554.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    A model for catalytic methane pyrolysis - A DFT study

    Matas, M., Pototschnig, U. & Holec, D., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  53. Published

    Atomistic investigations of SiC polytypes and creation of machine learning interatomic potential

    Reichmann, A., Rajabzadeh, Z., Halkali, C., Hammer, R. & Romaner, L., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  54. Published

    Automatic etch pit detection and characterization in KOH etch images of 4H-SiC using deep learning

    Holub, G., Hofer, S., Obermüller, T. & Romaner, L., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  55. Published

    Characterization of phase transformations and precipitation behavior in a novel Cu-enhanced near-α Ti alloy for additive manufacturing

    Obersteiner, D., Klein, T., Primig, S. & Musi, M., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  56. Published

    Charakterisierung der Mikro- und Nanostruktur eines hochlegierten, martensitischen Cr-Stahls

    Pferschy, M., 2024

    Research output: Thesis › Master's Thesis

  57. Published

    Comparison of omega particle size and interface in Ti-15Mo: APT vs. XRD

    Kozlik, J., Holý, V., Smilauerova, J. & Jelinek, A., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  58. Published

    Development of a machine learning-based interatomic potential for silicon carbide (SiC) using atomic cluster expansion (ACE)

    Halkali, C., Holub, G., Rajabzadeh, Z. & Romaner, L., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  59. Published

    Effect of Cu on the Carbide and Nitride Formation in Steels for High-Power Density Gears

    Böhle, S. I., 2024

    Research output: Thesis › Doctoral Thesis

  60. Published

    Einfluss von Ausforming auf die Mikrostruktur von PH13-8 Mo Maraging Stählen

    Krammer, K., 2024

    Research output: Thesis › Master's Thesis

  61. Published

    Hochauflösende Untersuchung der Nb-Löslichkeit in mikrolegierten Stählen

    Luger, T., 2024

    Research output: Thesis › Master's Thesis

  62. Published

    Hydrogen embrittlement in steels: state-of-the-art in theory and practice

    Graf, M., 2024

    Research output: Thesis › Master's Thesis

  63. Published

    Impact of measurement errors on machine learning models in steel production

    Rechberger, A., 2024

    Research output: Thesis › Master's Thesis

  64. Published

    Impact of the Wire Arc Additive Manufacturing (WAAM) process on the distortion and residual stress state of rapidly rotating components in solid/liquid separation

    Ruess, L., 2024

    Research output: Thesis › Master's Thesis

  65. Published

    Influence of Sc, Y, Ti, Zr, Hf, V, Nb, and Ta on structural and mechanical properties of Cr-Al-N coatings

    Mayrhofer, P., Zhou, L. & Holec, D., 2024, In: Berg- und hüttenmännische Monatshefte : BHM. 169.2024, 7, p. 375-380 6 p.

    Research output: Contribution to journal › Article › Research

  66. Published

    Integrated approach to SiC crystal growth: Multiphysics modeling and chemistry assessment in PVT furnaces

    Ramadan, Z., Obermüller, T., Hammer, R. & Romaner, L., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  67. Published

    Interface engineering at the nanoscale: Synthesis of low-energy boundaries

    Kapp, M., Eckert, J. & Renk, O., 2024, In: Advanced engineering materials. 26.2024, 19, 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Mechanical and electronic properties of monolayer TMDCs: A DFT study

    Ziegler, M., 2024

    Research output: Thesis › Master's Thesis

  69. Published

    Microstructural influences on bending resonance fatigue in nickel-based superalloy Rene'88DT

    Taurer, G., 2024

    Research output: Thesis › Master's Thesis

  70. Published

    Multiphysics simulations of PVT process for SiC growth

    Moya Merino, C., 2024

    Research output: Thesis › Master's Thesis

  71. Published

    NbC-Ausscheidungen in einem PH 15-5 Stahl

    Kaufmann, M., 2024

    Research output: Thesis › Master's Thesis

  72. Published

    Phase fraction and morphology of retained austenite in high-strength weld metal

    Rinnhofer, N., 2024

    Research output: Thesis › Master's Thesis

  73. Published

    Processing-structure-properties relationships of PH 13-8 Mo maraging steels

    Rosenauer, A., 2024

    Research output: Thesis › Doctoral Thesis

  74. Published

    Segregation analysis of a temper embrittled 51CrV4 with elevated trace element content for green steel production

    Teuschl, H., 2024

    Research output: Thesis › Master's Thesis

  75. Published

    Structure-property relationship of high-strength weld metal

    Schrittwieser, D., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  76. Published

    Untersuchung möglicher Anlassversprödung in perlitischen Stählen mit erhöhten Gehalten an Spurenelementen

    Stockinger, L.-M., 2024

    Research output: Thesis › Master's Thesis

  77. Published

    Using lab-XRD to verify successful electrochemical hydrogen charging for in-situ nanoindentation

    Jelinek, A., Zeiler, S. & Maier-Kiener, V., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  78. 2023
  79. Published

    Influence of MnS inclusion characteristics on generation of white etching cracks in 100Cr6 bearing steel

    Srikakulapu, K., Morsdorf, L., Gonzalez, I., Kölling, M., Broß, C., Ponge, D., Herbig, M. & Mayweg, D., 15 Dec 2023, In: Wear. 534-535.2023, 15 December, 16 p., 205129.

    Research output: Contribution to journal › Article › Research › peer-review

  80. E-pub ahead of print

    W18O49 Nanowhiskers Decorating SiO2 Nanofibers: Lessons from in situ SEM/TEM growth to large scale synthesis and fundamental structural understanding

    Kundrat, V., Bukvisova, K., Novak, L., Prucha, L., Houben, L., Zalesak, J., Vukusic, A., Holec, D., Tenne, R. & Pinkas, J., 5 Dec 2023, (E-pub ahead of print) In: Crystal growth & design. 24.2024, 1, p. 378-390 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Rejuvenation engineering in metallic glasses by complementary stress and structure modulation

    Şopu, D., Spieckermann, F., Bian, X., Fellner, S., Wright, J., Cordill, M., Gammer, C., Wang, G., Stoica, M. & Eckert, J., 24 Nov 2023, In: NPG Asia Materials. 2023, 15, 9 p., 61.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    sqsgenerator

    Holec, D. (Producer), Gehringer, D. (Producer) & Friák, M. (Producer), 21 Nov 2023

    Research output: Non-textual form › Software › Transfer

  83. Published

    Precipitation behaviour in AlMgZnCuAg crossover alloy with coarse and ultrafine grains

    Willenshofer, P., Tunes, M. A., Kainz, C., Renk, O., Kremmer, T., Gneiger, S., Uggowitzer, P. & Pogatscher, S., 15 Nov 2023, In: Materials Research Letters. 11.2023, 12, p. 1063-1072 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Emissivity measurements conducted on intermetallic γ-TiAl-based alloys for aeronautical applications

    Usategui, L., López-Ferreno, I., Echániz, T., Sainz-Menchón, M., Musi, M., Clemens, H. & López, G. A., 1 Nov 2023, In: Journal of Materials Research and Technology. 27.2023, November-December, p. 3170-3179 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. E-pub ahead of print

    Fabrication of bulk delta-phase Zirconium Hydride from Zircaloy-4 for use as moderators in microreactors

    Parkison, D., Tunes, M., Nizolek, T. J., Saleh, T. A., Hosemann, P. M. & Kohnert, C., 10 Oct 2023, (E-pub ahead of print) In: Scripta Materialia. 239.2024, 15 January, 7 p., 115771.

    Research output: Contribution to journal › Article › Research › peer-review

  86. E-pub ahead of print

    High-temperature microstructure evolution of an advanced intermetallic nano-lamellar γ-TiAl-based alloy and associated diffusion processes

    Nó, M. L., Klein, T., Clemens, H. & San Juan, J. M., 4 Oct 2023, (E-pub ahead of print) In: Acta materialia. 261.2023, 1 December, 13 p., 119380.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Precipitation behavior of hexagonal carbides in a C containing intermetallic γ-TiAl based alloy

    Burtscher, M., Weißensteiner, I., Wartbichler, R., Kirchheimer, K., Bernhard, C., Kiener, D. & Clemens, H., 4 Oct 2023, In: Journal of alloys and compounds. 969.2023, 25 December, 7 p., 172400.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Microstructural refinement by spontaneous recrystallization without prior deformation of a 15-5 PH steel alloy and its mechanism

    Ressel, G., Brandl, D., Hönigmann, T., Lukas, M., Stark, A., Gruber, C., Lukas, S., Stockinger, M. & Kozeschnik, E., 27 Sept 2023, In: Materials and Design. 234.2023, October, 11 p., 112370.

    Research output: Contribution to journal › Article › Research › peer-review

  89. E-pub ahead of print

    Assessment of different processing strategies to fabricate bulk Mg-Fe nanocomposites

    Roostaei, M., Uggowitzer, P., Pippan, R. & Renk, O., 12 Sept 2023, (E-pub ahead of print) In: Journal of Alloys and Metallurgical Systems. 4.2023, December, 9 p., 100034.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Machine learning mechanical properties of steel sheets from an industrial production route

    Millner, G., Mücke, M., Romaner, L. & Scheiber, D., Aug 2023, In: Materials. 30.2023, August, 11 p., 101810.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Revealing effects of solute Ta on solidification and precipitation of Al-7Si-0.3Mg based alloys

    Spacil, I., Holec, D., Albu, M. & LI, J., Aug 2023, In: Materialia. 30.2023, August, 17 p., 101846.

    Research output: Contribution to journal › Article › Research › peer-review

  92. E-pub ahead of print

    γ0.625pt′-size effect on the deformation microstructure and texture in a Ni-based superalloy using in-situ neutron diffraction

    Yan, Z., Srikakulapu, K., Gao, Y., Qin, H., Rong, Y., Bi, Z., Xie, Q., An, K., Wang, Y. & Tan, Q., 12 Jul 2023, (E-pub ahead of print) In: Scripta materialia. 236.2023, November, 5 p., 115665.

    Research output: Contribution to journal › Article › Research › peer-review

  93. E-pub ahead of print

    Alloying elements in intermetallic γ-TiAl based alloys – A review on their influence on phase equilibria and phase transformations

    Musi, M., Graf, G., Clemens, H. & Spörk-Erdely, P., 9 Jul 2023, (E-pub ahead of print) In: Advanced engineering materials. 26.2024, 4, 26 p., 2300610.

    Research output: Contribution to journal › Review article › peer-review

  94. Published

    Deformation and fatigue behaviour of additively manufactured Scalmalloy® with bimodal microstructure

    Schimbäck, D., Kaserer, L., Mair, P., Palm, F., Leichtfried, G. J., Pogatscher, S. & Hohenwarter, A., Jul 2023, In: International Journal of Fatigue. 172.2023, July, 14 p., 107592.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Effect of wire-arc directed energy deposition on the microstructural formation and age-hardening response of the Mg-9Al-1Zn (AZ91) alloy

    Graf, G., Spörk-Erdely, P., Maawad, E., Burtscher, M., Kiener, D., Clemens, H. & Klein, T., 30 Jun 2023, In: Journal of magnesium and alloys. 11.2023, 6, p. 1944-1958 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. E-pub ahead of print

    On energetics of allotrope transformations in transition-metal diborides via plane-by-plane shearing

    Leiner, T., Koutná, N., Janovec, J., Zelený, M., Mayrhofer, P. H. & Holec, D., 29 Jun 2023, (E-pub ahead of print) In: Vacuum. 215.2023, September, 9 p., 112329.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Segregation to α2/γ interfaces in TiAl alloys: A multiscale QM/MM study

    Gehringer, D., Huber, L., Neugebauer, J. & Holec, D., 23 Jun 2023, In: Physical review materials . 7.2023, 6, 14 p., 063604.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Precious metal amorphous AgAuSi: Alloy design by swapping gold for silver

    Weniger, L.-M., Gammer, C., Niewczas, M., Cordill, M. J., Spieckermann, F., Djemia, P., Faurie, D., Li, C.-H., Lassnig, A., Terziyska, V., Mitterer, C., Eckert, J. & Glushko, O., 17 Jun 2023, In: Materials and Design. 232.2023, August, 11 p., 112099.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Fatigue life assessment of metal foils in multifunctional composites via combined experiments and simulations

    Trost, C. O. W., Žák, S., Ruderes, K., Hammer, R., Rosc, J., Krivec, T., Schell, N., Gänser, H.-P., Hohenwarter, A. & Cordill, M. J., 15 Jun 2023, In: Composites Part B: Engineering. 259.2023, 15 June, 110715.

    Research output: Contribution to journal › Article › Research › peer-review

  100. E-pub ahead of print

    On the stability of Ti(Mn,Al)2 C14 Laves phase in an intermetallic Ti–42Al–5Mn alloy

    Graf, G., Seyffertitz, M., Spörk-Erdely, P., Clemens, H., Stark, A., Hatzenbichler, L., Holec, D., Burtscher, M., Kiener, D., Li, X. & Liu, K., 11 Jun 2023, (E-pub ahead of print) In: Intermetallics. 161.2023, October, 9 p., 107962.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Corrigendum to “Stabilization of Al3Zr allotropes in dilute aluminum alloys via the addition of ternary elements” [Materialia 21 (2022) 101321]

    Schmid, F., Gehringer, D., Kremmer, T., Cattini, L., Uggowitzer, P., Holec, D. & Pogatscher, S., Jun 2023, In: Materialia. 29.2023, June, 1 p., 101733.

    Research output: Contribution to journal › Comment/debate › peer-review

  102. Published

    In Situ Observations of the Microstructural Evolution during Heat Treatment of a PH 13-8 Mo Maraging Steel

    Rosenauer, A., Brandl, D., Ressel, G., Lukas, S., Gruber, C., Stockinger, M. & Schnitzer, R., Jun 2023, In: Advanced engineering materials. 25.2023, 12, 12 p., 2300410.

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Severe plastic deformation close to the melting point enables Mg-Fe nanocomposites with exceptional strength

    Roostaei, M., Uggowitzer, P., Pippan, R. & Renk, O., Jun 2023, In: Scripta materialia. 230.2023, June, 5 p., 115428.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...22 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben