Chair of Nonferrous Metallurgy (520)

Organisational unit: Chair

901 - 1000 out of 2,399Page size: 100

Research output

  1. 2015
  2. Published

    Werkstoffentwicklung von Cu-Basislegierungen

    Angerer, T., 12 May 2015.

    Research output: Contribution to conference › Presentation › Research

  3. Published

    Einfluss von Mikrolegierungselementen auf das Ausscheidungsverhalten von Aluminiumlegierungen

    Werinos, M. & Antrekowitsch, H., 11 May 2015.

    Research output: Contribution to conference › Presentation › Research

  4. Published

    Optimierung von Aluminiumknetlegierungen der 7xxx-Serie

    Kolb, G., 11 May 2015.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    Behandlung und Verwertung der Reststoffe aus der Kupfer-Metallurgie

    Steinacker, S., Rumpold, R. & Antrekowitsch, J., 4 May 2015. 17 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  6. Published

    Behandlung und Verwertung der Reststoffe aus der Kupfer-Metallurgie

    Steinacker, S., Rumpold, R. & Antrekowitsch, J., 4 May 2015, Mineralische Nebenprodukte und Abfälle 2: Aschen, Schlacken, Stäube und Baurestmassen. Neuruppin

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Agglomeration und Verwertung aluminiumhaltiger Reststoffe

    Zöhrer, M. & Angerer, T., May 2015.

    Research output: Contribution to conference › Poster › Transfer

  8. Published

    Aktivitäten Stefan Steinlechner NEM

    Steinlechner, S., May 2015.

    Research output: Contribution to conference › Presentation › Research

  9. Published

    Anwendung selektiver Metallbadprozesse zur Multimetallrückgewinnung aus komplexen Reststoffen

    Wegscheider, S., May 2015.

    Research output: Contribution to conference › Presentation › Research

  10. Published

    Der 2sDR Prozess - Eine zukunftsorientierte Möglichkeit zur Aufarbeitung von EAF-Stäuben

    Wegscheider, S., May 2015.

    Research output: Contribution to conference › Poster › Research

  11. Published

    Einführung in die Metallurgie

    Antrekowitsch, H., 30 Apr 2015.

    Research output: Contribution to conference › Presentation › Education › peer-review

  12. Published

    Prozessentwicklung zur metallurgischen Verwertung von Elektroaltgeräten

    Sorger, C., 25 Apr 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  13. Published

    Product upgrade of Waelz oxide using an altenative method

    Rösler, G. & Antrekowitsch, J., 9 Apr 2015. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  14. Published

    Optimierung der Eigenschaften plattierter 7xxx-Werkstoffe

    Kremmer, T. & Antrekowitsch, H., 31 Mar 2015.

    Research output: Contribution to conference › Presentation › Research

  15. Published

    Microstructural evolution and barrier layer dissolution during brazing of high strength brazing sheets

    Kremmer, T. & Antrekowitsch, H., 21 Mar 2015.

    Research output: Contribution to conference › Presentation › Research

  16. Published

    Influence of temperature on natural aging kinetics of AA6061 modified with Sn

    Werinos, M., Antrekowitsch, H., Fragner, W., Ebner, T., Uggowitzer, P. J. & Pogatscher, S., 19 Mar 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  17. Published

    Recycling von Produktionsrückständen aus der metallverarbeitenden Industrie

    Zöhrer, M., 17 Mar 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  18. Published

    Example of the Refractory Corrosion Test Work with Nickel Matte

    Gregurek, D., Ressler, A., Spanring, A. & Pichler, C., 15 Mar 2015.

    Research output: Contribution to conference › Paper › peer-review

  19. Published

    Werkstoffentwicklung bleifreier Messinglegierungen (Teil 1/3)

    Angerer, T., Hofer, S. & Antrekowitsch, H., 1 Mar 2015, In: Metall. 3, p. 82-87 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Recycling in der Automobilindustrie: Ist damit eine Rohstoffversorgung zukünftig gesichert?

    Antrekowitsch, H., 25 Feb 2015.

    Research output: Contribution to conference › Presentation › Research

  21. Published

    Quench-induced precipitates in Al-Si alloys: Calorimetric determination of solute content and characterisation of microstructure

    Schumacher, P., Pogatscher, S., Starink, M. J., Schick, C., Mohles, V. & Milkereit, B., 20 Feb 2015, In: Thermochimica Acta. 602, p. 63-73

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Aluminiumrecycling: Verfahren und ökologische sowie rechtliche Aspekte

    Bolitschek, J., 16 Feb 2015, 36 p.

    Research output: Book/Report › Other report › Research

  23. Published

    Stabilisierungsbehandlung und Verstrecken in 6xxx-Blechwerkstoffen sowie Einfluss von Mikrolegierungselementen auf das Ausscheidungsverhalten

    Werinos, M. & Antrekowitsch, H., 9 Feb 2015.

    Research output: Contribution to conference › Presentation › Research

  24. Published

    Potential of a Hydrometallurgical Recycling Process for Catalysts to Cover the Demand for Critical Metals, Like PGMs and Cerium

    Steinlechner, S., Feb 2015, In: JOM. 67, 2, p. 406-411 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Aluminiumrecycling: Verfahren und ökologische sowie rechtliche Aspekte

    Bolitschek, J., 15 Jan 2015.

    Research output: Contribution to conference › Presentation › Research

  26. Published

    AFM and KPFM investigation of high strength aluminium brazing sheets

    Huszar, M., Kremmer, T., Kratzer, M., Oberhauser, P., Antrekowitsch, H. & Teichert, C., 2015.

    Research output: Contribution to conference › Poster › Research

  27. Published

    Agglomeration und Recycling metallhaltiger Reststoffe

    Zöhrer, M., 2015.

    Research output: Contribution to conference › Presentation › Research

  28. Published

    Alkalischer Schmelzaufschluss von Leuchtstofffraktionen zur Wiedergewinnung Seltener Erden

    Gstettner, G., 2015

    Research output: Thesis › Master's Thesis

  29. Published

    Alloying Elements and Heat Treatment on Wrought 7xxx Aluminium Alloys

    Kolb, G. & Antrekowitsch, H., 2015.

    Research output: Contribution to conference › Poster › Research

  30. Published

    Atom Probe Tomography of Early Stage Clustering in Aluminum Alloys

    Pogatscher, S. & Gerstl, S. S. A., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  31. Published

    Auswirkung von Elementvariationen auf die Wärmebehandlung und Eloxierbarkeit von EN AW 7075

    Waldsam, F., 2015

    Research output: Thesis › Master's Thesis

  32. Published

    Challenges in the field of extractive metallurgy of technological metals

    Luidold, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  33. Published

    Challenges in the field of extractive metallurgy of technological metals

    Luidold, S., 2015, p. 747-758. 12 p.

    Research output: Contribution to conference › Paper › peer-review

  34. Published

    Charakterisierung der Umformbarkeit von 6xxx-Legierungen

    Bolitschek, J., 2015

    Research output: Thesis › Master's Thesis

  35. Published

    Chemische Entschichtung von Hartmetallen

    Kücher, G., 2015

    Research output: Thesis › Master's Thesis

  36. Published

    Christian Doppler Labor für Extraktive Metallurgie von Technologiemetallen

    Luidold, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  37. Published

    Comparative study of thermodynamic predictions and differential scanning calorimetry for Al-Zn-Mg-Cu alloys

    Kolb, G., Antrekowitsch, H., Uggowitzer, P. J., Pöschmann, D. & Pogatscher, S., 2015.

    Research output: Contribution to conference › Abstract › peer-review

  38. Published

    Concepts to optimize aging of Al-Mg-Si alloys

    Pogatscher, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  39. Published

    Control of precipitation during heat treatments based on DSC experiments

    Schumacher, P., Pogatscher, S., Starink, M., Keßler, O., Schick, C., Mohles, V. & Milkereit, B., 2015, International Conference on Solid-Solid Phase Transformations in Inorganic Materials. Whistler, Canada, p. 699 706 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Copper Networkingin South East Europe - Potentials and Challenges

    Antrekowitsch, J., 2015.

    Research output: Contribution to conference › Presentation › Research

  41. Published

    Editorial

    Luidold, S., 2015, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 68.2015, 1, p. 1-2 2 p.

    Research output: Contribution to journal › Editorial

  42. Published

    Einfluss von Legierungselementen auf das Eigenschaftsprofil von Aluminium-Knetlegierungen der 7xxx-Serie

    Scheiber, S., 2015

    Research output: Thesis › Master's Thesis

  43. Published

    Einfluss von Wärmebehandlungen auf das Eigenschaftsprofil von Aluminium-Knetlegierungen der 7xxx-Serie

    Alf, D., 2015

    Research output: Thesis › Master's Thesis

  44. Published

    Endbericht - Forschungsprojekt BioZInGa

    Steinlechner, S., 2015

    Research output: Book/Report › Commissioned report › Research

  45. Published

    Entwicklung eines Recyclingprozesses zur simultanen Rückgewinnung von Wertmetallen aus Reststoffen der Blei- und Zinkindustrie

    Unger, A., 2015

    Research output: Thesis › Doctoral Thesis

  46. Published

    Extraction of lanthanides from spent polishing agent

    Luidold, S., 2015, Rare Earths Industry: Technological, Economic, and Environmental Implications. 1 ed. Elsevier, p. 215 228 p. 14

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  47. Published

    FFG Endbericht - Optimierung der Eigenschaften plattierter 7xxx-Werkstoffe

    Kremmer, T. & Antrekowitsch, H., 2015

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    High Temperature Oxidation of Steel, Aluminum and Copper Alloys under the Influence of a Sustainable Energy-Efficient Combustion in Industrial Furnaces

    Sobotka, C., 2015

    Research output: Thesis › Doctoral Thesis

  49. Published

    HSC-Simulation des Peirce-Smith-Konverters

    Sorger, C., 2015

    Research output: Book/Report › Commissioned report › Research

  50. Published

    Hydrometallurgische Aufarbeitung von Elektronikschrott - erster Überblick

    Sorger, C. & Luidold, S., 2015

    Research output: Book/Report › Commissioned report › Research

  51. Published

    Identification of permanent magnets

    Benedek, L., 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  52. Published

    Impact of microstructural characteristics on the corrosion morphology of high strength brazing sheets

    Kremmer, T., Antrekowitsch, H., Oberhauser, P., Hanko, G. & Mori, G., 2015, Proceedings of EMC 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Implementation of Alternative Reducing Agents in Metallurgical Operations

    Rösler, G., 2015

    Research output: Thesis › Doctoral Thesis

  54. Published

    Influence of Alloy Production History on Natural Aging of AA6061 Modified with Sn

    Werinos, M., Antrekowitsch, H., Fragner, W., Ebner, T., Uggowitzer, P. J. & Pogatscher, S., 2015, Proceedings of EMC 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Influence of temperature on natural aging kinetics of AA6061 modified with Sn

    Werinos, M., Antrekowitsch, H., Fragner, W., Ebner, T., Uggowitzer, P. J. & Pogatscher, S., 2015, Light Metals 2015: TMS (The Minerals, Metals & Materials Society), 2015. 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Konzepte zur Optimierung der Ausscheidungsbildung in Al-Mg-Si Legierungen

    Pogatscher, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  57. Published

    Korngrößenbestimmung von unbekannten Aluminiumprofilen

    Kolb, G. & Felser, J., 2015, 11 p.

    Research output: Book/Report › Commissioned report › Transfer

  58. Published

    Legierungselemente und Wärmebehandlungen von Aluminiumknetlegierungen der 7xxx-Serie

    Kolb, G., 2015.

    Research output: Contribution to conference › Poster › Research

  59. Published

    Legierungs- und Prozessdesign von Al-Mg-Si Knetlegierungen für den Automobilbau

    Prillhofer, R., 2015

    Research output: Thesis › Doctoral Thesis

  60. Published

    Methoden der Pulvercharakterisierung Enabling & Efficient Cold Gas Spraying

    Ratschbacher, K., 2015

    Research output: Book/Report › Other report › Research

  61. Published

    New development in metal recovery from secondary resources

    Pichler, C., Antrekowitsch, H. & Rumpold, R., 2015, p. 115. 127 p.

    Research output: Contribution to conference › Paper

  62. Published

    Optimierung der Eigenschaften plattierter 7xxx-Werkstoffe (Projektabschluss)

    Kremmer, T. & Antrekowitsch, H., 2015.

    Research output: Contribution to conference › Presentation › Research

  63. Published

    Optimierung der pyrolytischen Vorbehandlung von Leiterplattenschrotten unter besonderer Betrachtung der Bromgewinnung

    Stuhlpfarrer, P., Luidold, S. & Antrekowitsch, H., 2015, Recycling und Rohstoffe. Neuruppin: TK-Verl., Vol. 8. p. 325 - 344 19 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Optimierung des Al-Recyclingprozesses von verunreinigten Schrotten

    Pirker, A., 2015

    Research output: Thesis › Doctoral Thesis

  65. Published

    Oxidation kinetics of a molybdenum-tantalum-alloy

    Ratschbacher, K. & Luidold, S., 2015, p. 771-782.

    Research output: Contribution to conference › Paper › peer-review

  66. Published

    Potential of a hydrometallurgical recycling process for catalysts to cover the demand for critical metals, like PGM and cerium

    Steinlechner, S. & Antrekowitsch, J., 2015, In: JOM. p. 1-6

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    POTENTIAL OF INDUSTRIAL WASTES RECYCLING FROM LEAD, ZINC OR COPPER INDUSTRY TO CONTRIBUTE TO THE SUPPLY OF MINOR METALS

    Steinlechner, S. & Antrekowitsch, J., 2015, SIPS2015 – Sustainable Industrial Processing Summit and Exhibition.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Potential of lead, zinc and copper containing residues to contribute to the supply of minor metals

    Steinlechner, S. & Antrekowitsch, J., 2015, Wastes Solutions Treatments Opportunities. p. 341-357

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Quantitative und qualitative Identifikation von relevanten sekundären Stoffströmen in Österreich: Industrielle Prozesse / Technologien

    Luidold, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  70. Published

    Quantitative und qualitative Identifikation von relevanten sekundären Stoffströmen in Österreich: Industrielle Prozesse / Technologien

    Luidold, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  71. Published

    Recovery of Lead in Residues from Hydrometallurgical Zinc Winning

    Antrekowitsch, J., 2015.

    Research output: Contribution to conference › Presentation › Research

  72. Published

    Recycling of aluminium powdered waste

    Zöhrer, M. & Angerer, T., 2015, European metallurgical Conference-EMC 2015. Clausthal-Zellerfeld, Vol. 2. p. 1132 1133 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Recycling of Complex Materials with Focus on Zinc-, Lead- Containing Residues

    Antrekowitsch, J., 2015.

    Research output: Contribution to conference › Presentation › Research

  74. Published

    Recycling of low grade aluminium scrap: Optimisation of the melting process by using oxyfuel technology

    Antrekowitsch, H., 2015.

    Research output: Contribution to conference › Presentation › Research

  75. Published

    Recycling of Nd2Fe14B Magnets

    Stuhlpfarrer, P., Luidold, S. & Antrekowitsch, H., 2015, p. 925-938. 13 p.

    Research output: Contribution to conference › Paper › peer-review

  76. Published

    Recycling of refractory metals

    Ratschbacher, K., 2015

    Research output: Thesis › Doctoral Thesis

  77. Published

    Recycling of Zinc Shortcourse EMC

    Antrekowitsch, J., 2015.

    Research output: Contribution to conference › Presentation › Research

  78. Published

    Recycling von Elektronikschrott unter besonderer Berücksichtigung der Sondermetalle und Seltenen Erden

    Stuhlpfarrer, P., 2015

    Research output: Thesis › Doctoral Thesis

  79. Published

    Recycling von Produktionsrückständen aus der metallverarbeitenden Industrie

    Zöhrer, M., Angerer, T., Antrekowitsch, H. & Kügele, A., 2015, Recycling und Rohstoffe. Neuruppin, Vol. 8. p. 371 384 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Recycling von sekundären Batteriesystemen

    Kaindl, M., 2015

    Research output: Thesis › Doctoral Thesis

  81. Published

    Reprint of: Characterization of bulk metallic glasses via fast differential scanning calorimetry

    Pogatscher, S., Leutenegger, D., Hagmann, A., Uggowitzer, P. J. & Löffler, J. F., 2015, In: Thermochimica Acta. 603, 10, p. 46-52

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Resources, Recycling, Claims

    Antrekowitsch, H., 2015.

    Research output: Contribution to conference › Presentation › Research

  83. Published

    Reststoffe aus der Metallurgie: Potential oder Konkurrenz für die Mineralrohstoffindustrie?

    Antrekowitsch, H., 2015.

    Research output: Contribution to conference › Presentation › Research

  84. Published

    Rückgewinnung ausgewählter kritischer Rohstoffe aus einem hydrometallurgischen Magnet-Recyclingprozess

    Alf, O., 2015

    Research output: Thesis › Master's Thesis

  85. Published

    Rückgewinnung von kritischen Metallen aus Rückständen der Leiterplatten Aufbereitung

    Benigni, C., 2015

    Research output: Thesis › Master's Thesis

  86. Published

    Solute transport in age-hardenable aluminum alloys

    Pogatscher, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  87. Published

    Stahlwerksstaubrecycling im 21. Jahrhundert, aktuelle Entwicklungen und zukünftige Herausforderungen

    Antrekowitsch, J., 2015, Berliner Recycling und Rohstoffkonferenz.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  88. Published

    Statistical and Thermodynamic Optimization of Trace-Element Modified Al-Mg-Si-Cu Alloys

    Pogatscher, S., Antrekowitsch, H., Werinos, M., Rank, G., Kaiß, A., Prillhofer, R., Löffler, J. F. & Uggowitzer, P. J., 2015, TMS Light Metals 2015. Hyland, M. (ed.).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Statistical and Thermodynamic Optimization of Trace-Element Modified Al-Mg-Si-Cu Alloys

    Pogatscher, S., Antrekowitsch, H., Werinos, M., Rank, G., Kaiß, A., Prillhofer, R., Löffler, J. F. & Uggowitzer, P. J., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  90. Published

    Steel Mill Dust Recycling in the 21st Century

    Antrekowitsch, J., 2015.

    Research output: Contribution to conference › Paper › peer-review

  91. Published

    Steel Mill Dust Recycling in the 21st Century

    Antrekowitsch, J., 2015.

    Research output: Contribution to conference › Presentation › Research

  92. Published

    Stoffliches Recycling von Elektronikschrott - eine Herausforderung für die Zukunft

    Antrekowitsch, H., 2015.

    Research output: Contribution to conference › Presentation › Research

  93. Published

    Sustainable ways to recycle metallurgical residues in the 21st century

    Pichler, C., 2015, Proceedings of Lead-Zinc Conference Pb-Zn 2015. p. 65-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Technical optimization and economic evaluation of the lead bath recycling process

    Böckl, B., 2015

    Research output: Thesis › Master's Thesis

  95. Published

    Technical presentation – Nonferrous Metallurgy

    Steinlechner, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  96. Published

    The current status of mini mill solutions for the recycling of steel mill dusts

    Antrekowitsch, J. & Steinlechner, S., 2015, SIPS2015 – Sustainable Industrial Processing Summit and Exhibition.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    The current status of mini mill solutions for the recycling of steel mill dusts - new aspects in hydrometallurgy

    Antrekowitsch, J., 2015.

    Research output: Contribution to conference › Presentation › Research

  98. Published

    TiO2-Pigmentherstellung – Technik und Wirtschaftlichkeit eines kombinierten Verfahrens

    Miedler, P., 2015

    Research output: Thesis › Master's Thesis

  99. Published

    Treatment of industrial waste

    Zöhrer, M., Angerer, T., Antrekowitsch, H. & Duspiva, F., 2015, European metallurgical Conference-EMC 2015. Clausthal-Zellerfeld, Vol. 2. p. 833 844 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Untersuchung des Einflusses von einzelnen Parametern auf die Zinnausbringung im Konverterstaub

    Kaisergruber, F., 2015

    Research output: Thesis › Master's Thesis

  101. Published

    Untersuchungen zum Verhalten von Silber und Indium in Rückständen der Zinkindustrie in einem pyrometallurgischen Aufarbeitungsschritt

    Leuchtenmüller, M., 2015

    Research output: Thesis › Master's Thesis

Previous 1...6 7 8 9 10 11 12 13 ...24 Next
View graph of relations

Contact information

Erzherzog-Johann-Straße 3/II, 8700 Leoben
  • Main phone number: +43 3842 402 5201 oder 5204