Chair of Mechanics (400)

Organisational unit: Chair

251 - 300 out of 809Page size: 50

Research output

  1. 2016
  2. Published

    Numerical study of the influence of irradiation parameters on the microwave-induced stresses in granite for industrial applications

    Toifl, M., Hartlieb, P., Meisels, R., Antretter, T. & Kuchar, F., 11 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  3. Published

    Numerical study of the influence of irradiation parameters on the microwave-induced stresses in granite for industrial applications

    Toifl, M., Hartlieb, P., Meisels, R., Antretter, T. & Kuchar, F., 11 Apr 2016, Comminution '16 - Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Size-dependent surface energies of Au nanoparticles

    Holec, D., Dumitraschkewitz, P., Fischer, F. D. & Vollath, D., 11 Apr 2016, p. 1-13. 13 p.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    In-situ Observation of Cross- Sectional Microstructural Changes and Stress Distributions in Fracturing TiN Thin Film during Nanoindentation

    Zeilinger, A., Todt, J., Krywka, C., Müller, M., Ecker, W., Sartory, B., Meindlhumer, M., Stefenelli, M., Daniel, R., Mitterer, C. & Keckes, J., 7 Mar 2016, In: Scientific reports (London : Nature Publishing Group). 6:22670, p. 1-14 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Eigenspannungsoptimiertes Richtkonzept: Anwendung auf Langprodukte

    Kaiser, R., Antretter, T. & Buchmayr, B., 5 Mar 2016, Tagungsgband XXXV. Verformungskundliches Kolloquium 2016: Tagungsband. Buchmayr, B. (ed.). Leoben: Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 153-159 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. E-pub ahead of print

    3D numerical study on microwave induced stresses in inhomogeneous hard rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 18 Jan 2016, (E-pub ahead of print) In: Minerals engineering. 90.2016, May, p. 29-42 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Analyse eines Wälzlagerprüfstands hinsichtlich Steifigkeit und dynamischer Belastung

    Zellhofer, M., 2016

    Research output: Thesis › Diploma Thesis

  9. Published

    A new Treatment of transient grain growth

    Svoboda, J., Fratzl, P., Zickler, G. & Fischer, F. D., 2016, In: Acta materialia. 115, p. 442-447

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    A Self-Consistent Model for Thermodynamics of Multicomponent Solid Solutions

    Svoboda, J. & Fischer, F. D., 2016, In: Scripta materialia. p. 154-157

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    A thermokinetic model for Mg-Si couple Formation in Al-Mg-Si alloys

    Svoboda, J., Shan, Y. V., Kozeschnik, E. & Fischer, F. D., 2016, In: Modelling and simulation in materials science and engineering. 24, p. 035021-1-16 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Calculation of crack driving Forces of surface cracks subjected to rolling/sliding contact

    Krácalik, M., Daves, W. & Antretter, T., 2016, In: Engineering Fracture Mechanics. 152, 2, p. 10-25

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Experimental and theoretical evidence of displacive martensite in an intermetallic Mo-containing Ƴ-TiAl based alloy

    Mayer, S., Petersmann, M., Fischer, F. D., Clemens, H., Waitz, T. & Antretter, T., 2016, In: Acta materialia. 115, p. 242-249 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Finite element analysis of arbitrarily complex electronics devices

    Gschwandl, M., Fuchs, P., Fellner, K., Antretter, T., Krivec, T. & Tao, Q., 2016, Proceedings of the 18th Electronics Packaging Technology Conference EPTC2016. p. 497-500

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Fracture and Material Behavior of Thin Film composites

    Kozic, D., Konetschnik, R., Maier-Kiener, V., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2016, 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) . Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Free edges at bilayered compounds - a short analytical and numerical reconsideration

    Antretter, T., Fischer, F. D., Rammerstorfer, F. G. & Zickler, G. A., 2016, In: Archive of applied mechanics. 86, p. 2053-2061

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Improved thermodynamic Treatment of vacancy-mediated diffusion

    Fischer, F. D., Hackl, K. & Svoboda, J., 2016, In: Acta materialia. 108, p. 347-354

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Influence of the levelling process on the mechanical properties of heavy steel plates

    Kaltenbrunner, T., Antretter, T., Ecker, W., Kaiser, R., Gänser, H.-P. & Parteder, E., 2016, Proceedings of Rolling '16.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Modeling Concepts for Intermetallic Titanium Aluminides

    Appel, F., Clemens, H. & Fischer, F. D., 2016, In: Progress in materials science. 81, p. 55-124

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Modeling of variant-interaction during bainitic phase transformation

    Ehlenbröker, U., Mahnken, R., Petersmann, M. & Antretter, T., 2016, IOP Conference Series Materials Science and Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Numerical simulation of the electrical performance of printed circuit boards under cyclic thermal loads

    Fellner, K., Antretter, T., Fuchs, P. F. & Tao, Q., 2016, In: Microelectronics Reliability. p. 148-155

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Numerical study of microwave induced stress and damage formation in heterogeneous rocks

    Toifl, M., 2016

    Research output: Thesis › Doctoral Thesis

  23. Published

    Precipitate growth in multi-component systems with stress relaxation by diffusion and creep

    Svoboda, J., Fischer, F. D., Riedel, H. & Kozeschnik, E., 2016, In: International journal of plasticity. 82, p. 112 126 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Simulation and optimization of the in-service behavior of coated inserts for turning and milling

    Krajinovic, I., 2016

    Research output: Thesis › Doctoral Thesis

  25. Published

    Simulation des Freiformbiegens von Profilrohren im Automobilbau

    Beulich, N. V., 2016

    Research output: Thesis › Master's Thesis

  26. Published

    Stress Relaxation by Power-Law Creep During Growth of a Misfitting Precipitate

    Fischer, F. D., Svoboda, J., Antretter, T. & Kozeschnik, E., 2016, In: International journal of solids and structures. 96, p. 74-80

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    The Mechanics of Tessellations - Bioinspired Strategies for Fracture Resistance

    Fratzl, P., Kolednik, O., Fischer, F. D. & Dean, M. N., 2016, In: Chemical Society Reviews. 45, 2, p. 252-267

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Thermomechanische Simulation des Härteprozesses von wärmebehandelten Grobblechen

    Bacher, B., 2016

    Research output: Thesis › Master's Thesis

  29. Published

    Thermo-physical properties of selected hard rocks and their relation to microwave-assisted comminution

    Hartlieb, P., Toifl, M., Kuchar, F., Meisels, R. & Antretter, T., 2016, In: Minerals engineering. 91.2016, p. 34 - 41 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. 2015
  31. E-pub ahead of print

    Cyclic mechanical behavior of thin layers of copper: A theoretical and numerical study

    Fellner, K., Antretter, T., Fuchs, P. & Pelisset, T. M. A., 8 Dec 2015, (E-pub ahead of print) In: The Journal of Strain Analysis for Engineering Design. 51.2016, 2, p. 1-9 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Special cases of martensite compatibility: A near single-variant habit-plane and the martensite of nanocrystalline NiTi

    Petersmann, M. & Antretter, T., 1 Dec 2015, MATEC Web of Conferences : ESOMAT 2015 – 10th European Symposium on Martensitic Transformations . Schryvers, N. & Van Humbeeck, J. (eds.). 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Calculating entropies of alkaline earth metal molybdates

    Gamsjäger, E., Morishita, M. & Gamsjäger, H., 18 Nov 2015, In: Monatshefte für Chemie = Chemical monthly.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Crystallographic aspects of phase transformations in intermetallics and steels

    Petersmann, M., Antretter, T. & Ehlenbröcker, U., 4 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  35. Published

    Modeling of variant-interaction during bainitic phase transformation

    Ehlenbröcker, U. & Petersmann, M., 10 Oct 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  36. E-pub ahead of print

    Analysis of the mobility of migrating austenite–ferrite interfaces

    Gamsjäger, E., Wiessner, M., Schider, S., Chen, H. & van der Zwaag, S., 11 Sept 2015, (E-pub ahead of print) In: Philosophical magazine. 95.2015, 26, p. 2899-2917 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Modelling of Precipitation in High Strength Creep Resistant Steels

    Antretter, T., Fischer, F. D., Kozeschnik, E. & Svoboda, J., 10 Aug 2015.

    Research output: Contribution to conference › Presentation › Research

  38. Published

    An inverse finite element approach to calculate full-field forming strains

    Ritt, R., Machado, M., Fischlschweiger, M., Major, Z. & Antretter, T., Jul 2015, Key engineering materials. Vol. 651-653.2015. p. 363-368 6 p. (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  39. Published

    Evolution of reverted austenite and martensite during thermal processing of chromium stainless steels

    Gamsjäger, E., Wiessner, M., Gruber, M. & van der Zwaag, S., 30 Jun 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  40. Published

    The kinetics of diffusive phase transformations in the light of trans-interface diffusion

    Gamsjäger, E. & Rettenmayr, M., 28 Jun 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  41. E-pub ahead of print

    A New Self-Consistent Model for Thermodynamics of Binary Solutions

    Svoboda, J., Shan, Y. V. & Fischer, F. D., 15 Jun 2015, (E-pub ahead of print) In: Scripta materialia. 108.2015, November, p. 27-30 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    The relation of temperature, microwave absorbing properties and thermo - dynamic behavior of selected hard rocks

    Hartlieb, P., Toifl, M., Meisels, R., Antretter, T. & Kuchar, F., 11 Jun 2015, Physical Separation 15 - Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    The relation of temperature, microwave absorbing properties and thermo-dynamic properties of selected hard rocks

    Hartlieb, P., Toifl, M., Meisels, R., Antretter, T. & Kuchar, F., 11 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  44. Published

    Tissue growth controlled by geometric boundary conditions: A simple model recapitulating aspects of callus formation and bone healing

    Fischer, F.-D., Zickler, G., Dunlop, J. W. C. & Fratzl, P., 6 Jun 2015, In: Journal of the Royal Society Interface. 12.2015, 107, 8 p., 20150108.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    NUMERICAL ANALYSIS OF THE ROCK CUTTING PROCESS BASED ON A TWO PARAMETER DESCRIPTION OF TENSILE STRENGTH USING THE WEIBULL THEORY

    Mikl-Resch, M. J., Tichy, R., Antretter, T., Pittino, G., Galler, R., Ecker, W., Gimpel, M. & Kargl, H., 13 May 2015. 5 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  46. Published

    NUMERICAL ANALYSIS OF THE ROCK CUTTING PROCESS BASED ON A TWO PARAMETER DESCRIPTION OF TENSILE STRENGTH USING THE WEIBULL THEORY

    Mikl-Resch, M. J., Antretter, T., Tichy, R., Pittino, G., Galler, R., Ecker, W., Gimpel, M. & Kargl, H., 10 May 2015, ISRM 2015_PROCEEDINGS. 5 p. 724

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    NUMERICAL ANALYSIS OF THE ROCK CUTTING PROCESS BASED ON A TWO PARAMETER DESCRIPTION OF TENSILE STRENGTH USING THE WEIBULL THEORY

    Mikl-Resch, M. J., Antretter, T., Tichy, R., Pittino, G., Galler, R., Ecker, W., Gimpel, M. & Kargl, H., 10 May 2015. 5 p.

    Research output: Contribution to conference › Poster › Research

  48. Published

    Fracture mechanics of thin film systems on the sub-micron scale

    Kozic, D., Treml, R., Schongrundner, R., Brunner, R., Kiener, D., Zechner, J., Antretter, T. & Ganser, H. P., 6 May 2015, 2015 16th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2015. Institute of Electrical and Electronics Engineers, 7103088

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Characterization of stainless steels by means of high temperature X-­ray diffraction

    Gamsjäger, E., Wiessner, M. & Angerer, P., 30 Apr 2015, Stainless Steel Conference 2015-Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Comparison of Different Methods for Stress and Deflection Analysis in Embedded die Packages during the Assembly Process

    Macurova, K., Bermejo, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 1 Apr 2015, In: Journal of Microelectronics and Electronic Packaging. 12.2015, 2, p. 80-85 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Stress, deformation and diffusion interactions in solids - A simulation study

    Fischer, F. D. & Svoboda, J., 26 Feb 2015, In: Journal of the mechanics and physics of solids. 78, p. 427-442 16 p., 2612.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    3D numerical study on microwave induced stresses in inhomogeneous hard rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015.

    Research output: Contribution to conference › Presentation › Research

Previous 12 3 4 5 6 7 8 9 ...17 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18/III, 8700 Leoben
  • Main phone number: +43 3842 402 4001