Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

1001 - 1050 out of 1,629Page size: 50

Research output

  1. 2011
  2. Published

    Vergleichende optische und thermo-kalorimetrische Untersuchungen an PBT Bauteilen

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  3. Published

    Wärmeformbeständigkeitsuntersuchunen an UP-Harz-Werkstoffen

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  4. Published

    Werkstoffcharakterisierung, Materialmodellierung und Simulaton von CFK-Geflechtlaminaten

    Wolfahrt, M., Cichosz, J., Gager, J., Hinterhölzl, R., Pettermann, H. E., Frieß, S., Pinter, G. & Noisternig, J., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 101-111

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Zugprüfungen an PVC-Mischungen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  6. 2010
  7. Published

    Cyclic interlaminar crack growth in unidirectional and braided composites

    Stelzer, S., Pinter, G., Wolfahrt, M., Brunner, A. & Noisternig, J., 16 Oct 2010.

    Research output: Contribution to conference › Presentation › Research

  8. Published

    Damage Tolerance and interlaminar crack growth of braided composites

    Stelzer, S., Wolfahrt, M., Pinter, G., von Reden, T. & Noisternig, J., 7 Jun 2010.

    Research output: Contribution to conference › Presentation › Research

  9. Published

    Accelerated cyclic fracture mechanics tests to analyse molecular and morphological effects on slow crack growth in modern PE pipe grades

    Redhead, A., Pinter, G. & Frank, A., 2010, Proceedings ANTEC 2010. p. 360-364

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Accelerated cyclic fracture mechanics tests to analyze molecular and morphological effects on slow crack growth in modern PE pipe grades

    Redhead, A., Pinter, G. & Frank, A., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  11. Published

    Aging behavior and lifetime modeling for polycarbonate

    Kahlen, S., Wallner, G. & Lang, R., 2010, In: Solar energy. p. 755-762

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Aging behavior of polymeric absorber materials for solar thermal collectors

    Kahlen, S., Wallner, G. & Lang, R., 2010, Proceedings of P2010, 14th International Scientific Conference on Polymeric Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Aging behavior of polymeric solar absorber materials: Aging on the component level

    Kahlen, S., Wallner, G., Lang, R., Meir, M. & Rekstad, J., 2010, In: Solar energy. p. 459-465

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Alterungsverhalten von Polyolefinmaterialien für Wärmespeicher

    Hagauer, A., 2010

    Research output: Thesis › Master's Thesis

  15. Published

    Analyse der Morphologie und des Schaltvorgangs von thermotropen Polymeren mittels Rasterkraftmikroskopie

    Weber, A., 2010

    Research output: Thesis › Master's Thesis

  16. Published

    Bestimmung der Schweißnahtfestigkeit zweier unterschiedlicher Schweißnahtausführungen an einem PVC-Folienwerkstoff

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    Bestimmung von Kerbtiefen an grabenlos verlegten Polyethylen-Rohrleitungen

    Frank, A., Hartl, A. M., Redhead, A. & Pinter, G., 2010, proceedings of ÖGL Symposium Grabenlos 2010. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Bewertung von Oberflächendefekten und bruchmechanische Lebensdauerabschätzung von innendruckbelasteten Rohren aus Polyethylen

    Hartl, A. M., 2010

    Research output: Thesis › Master's Thesis

  19. Published

    Characterization of physical and chemical aging of polymeric solar materials by mechanical testing

    Kahlen, S., Jerabek, M., Wallner, G. & Lang, R., 2010, In: Polymer Testing. p. 72-81

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Characterization of the fracture and fatigue behavior of thermoplastic elastomer materials

    Major, Z., Isasi, M. & Schwarz, T., 2010, Key engineering materials. p. 789-792 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  21. Published

    Characterization of the fracture behavior of NBR and FKM grade elastomers for oilfield applications

    Major, Z. & Lang, R., 2010, In: Engineering Failure Analysis. p. 701-711

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Characterization of the global deformation behaviour of engineering plastics rolls

    Berer, M. & Major, Z., 2010, In: International journal of mechanics and materials in design. p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Characterization of the Orientation Parameters Around Crack Tips in Unfilled and Nanofilled Poly(propylene) Using in-situ Synchrotron Small and Wide Angle Scanning Scattering Techniques

    Feuchter, M., Maier, G., Zizak, I., Pinter, G., Kracalik, M., Laske, S. & Langecker, G. R., 2010, MODERN TRENDS IN POLYMER SCIENCE-EPF 09. Vol. 296. p. 189-196 (MACROMOLECULAR SYMPOSIA).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  24. Published

    Characterization of the Rapid Gas Decompression Behavior of HNBR Based Rubber

    Schrittesser, B. C., 2010, 94 p.

    Research output: Thesis › Master's Thesis

  25. Published

    Charakterisierung des Einflusses von variierenden Prozessparametern beim Presssintern auf die Eigenschaften von ultrahochmolekularem Polyethylen (UHMWPE)

    Haselwanter, D., 2010

    Research output: Thesis › Master's Thesis

  26. Published

    Charakterisierung des Lichtstreuverhaltens und der Morphologie von thermotropen Verglasungen auf Thermoplastbasis

    Seemann, M., 2010

    Research output: Thesis › Master's Thesis

  27. Published

    Computational and experimental investigation of delamination in L-shaped laminated composite components

    Wimmer, G., Kitzmüller, W., Pinter, G., Wettemann, T. & Pettermann, H. E., 2010, In: Engineering Fracture Mechanics. p. 2810-2820

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Cyclic bend tests for the reliability evaluation of printed circuit boards under dynamic loads

    Fuchs, P. & Major, Z., 2010, In: Frattura ed Integrità Strutturale . 15, January, p. 64-73

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Cyclic CRB Tests - A quick and reliable tool for ranking of PE pipe grades

    Pinter, G., Frank, A., Redhead, A. & Lang, R. W., 2010, proceedings of Plastic Pipes XV Conference 2010. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Cyclic interlaminar crack growth in unidirectional and braided composites

    Stelzer, S., Pinter, G., Wolfahrt, M., Brunner, A. & Noisternig, J., 2010, Proceedings of 5th International Conference on Fatigue of Composites. p. 63-75

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Damage Tolerance and interlaminar crack growth of braided composites

    Stelzer, S., Wolfahrt, M., Pinter, G., von Reden, T. & Noisternig, J., 2010, Proceedings of 14th European Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Damp heat induced physical aging of PV encapsulation

    Oreski, G. & Wallner, G., 2010, Proceedings of "ITherm 2010". p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Degradation model for an extruded polymeric solar thermal absorber

    Olivares, A., Rekstad, J., Meir, M., Kahlen, S. & Wallner, G., 2010, In: Solar energy materials and solar cells. p. 1031-1037

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Determination of solar optical properties of transparent polymer films using UV/vis spectroscopy

    Oreski, G., Tscharnuter, D. & Wallner, G., 2010, In: Solar energy materials and solar cells. p. 884-891

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Development and Characterization of polymeric thermotropic materials for overheating protectiion of solar collectors

    Resch, K., Wallner, G. & Lang, R., 2010, Society of Plastics Engineers. p. 1127-1130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Development of a comparative test methodology to characterize scratch and stickiness of PP-compounds

    Cakmak, U. D., 2010

    Research output: Thesis › Master's Thesis

  37. Published

    Development of a Test Procedure for Mode II Fatigue Delamination Resistance of Advanced Fibre-Reinforced Polymer-Matrix Laminates

    Brunner, A., Stelzer, S. & Pinter, G., 2010, Proceedings of 18th European Conference on Fracture.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Druckversuche an einem expandierten Polypropylen und 3-Punkt-Biegeversuche an einem Polypropylen

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  39. Published

    Durchstoßversuch an PP und ABS/PC-Blends

    Hinterdorfer, S. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  40. Published

    Einfluss von Bohrungen auf ausgewählte Zug- und Druckeigenschaften sowie das Ermüdungsverhalten von kohlenstofffaserverstärkten Epoxidharz- Prepreg-Laminaten

    Zechner, D. M., 2010

    Research output: Thesis › Master's Thesis

  41. Published

    Endprodukteigenschaften von PET-Verpackungsbändern in Abhängigkeit von thermischen Einflussfaktoren im Produktionsprozess

    Kremser, P., 2010

    Research output: Thesis › Master's Thesis

  42. Published

    Experimental Determination of Cohesive Zone Models for Epoxy Composites

    Fuchs, P. & Major, Z., 2010, In: Experimental mechanics. 51, 5, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Filler/matrix-debonding and micro-mechanisms of deformation in particulate filled polypropylene composites under tension

    Jerabek, M., Major, Z., Renner, K., Moczo, J., Pukanszky, B. & Lang, R., 2010, In: Polymer. p. 2040-2048

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Fracture Mechanics Based Lifetime Assessment and Long-term Failure Behavior of Polyethylene Pressure Pipes

    Frank, A., 2010, 162 p.

    Research output: Thesis › Doctoral Thesis

  45. Published

    Fracture Mechanics Lifetime Prediction of PE 80 and PE 100 Pipes under complex loading conditions

    Frank, A., Pinter, G. & Lang, R. W., 2010, proceedings of Plastic Pipes XV Conference 2010. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Herstellung und Charakterisierung thermotroper Systeme mit fixierten Domänen

    Mikl-Resch, M. J., 2010

    Research output: Thesis › Diploma Thesis

  47. Published

    Implementation of an In-Situ Constrained Test Set Up for Rapid Gas Decompression Failure Analysis

    Schrittesser, B., Major, Z., Olah, L. & Schwarz, T., 2010, Proceedings of 9th Fall Rubber Colloquium. p. 295-297

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Investigation of the slow crack growth behavior of static and cyclic loaded specimens of polyethylene by 2D and 3D optical fracture surface analysis

    Frank, A., Bruckmoser, K., Redhead, A., Gruber, D. & Pinter, G., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  49. Published

    Investigation of the slow crack growth behavior of static and cyclic loaded specimens of polyethylene by 2D and 3D optical fracture surface analysis

    Andreas, F., Bruckmoser, K., Redhead, A., Gruber, D. P. & Pinter, G., 2010, Proceedings of "Austrian-Slovenian Polymer Meeting 2010". p. 145-145

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Kerbschlagbiegeversuche an 11 PP Compounds

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Kerbschlagbiegeversuche an 15 PP Compounds

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  52. Published

    Kerbschlagprüfungen an PE Typen

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1...17 18 19 20 21 22 23 24 ...33 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101