Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

201 - 300 out of 1,629Page size: 100

Research output

  1. 2021
  2. Published

    Fracture of layered polymers

    Arbeiter, F., Petersmann, S., Wiener, J. & Spoerk, M., 31 Aug 2021.

    Research output: Contribution to conference › Abstract

  3. Published

    Bio-based polymers for transport packaging – possibilities & limitations

    Wild, N., Feuchter, M., Schindler, P., Poczi, A., Gebeshuber, I. C., Vasiljevic, M., Pamminger, H., MacQueen , M. & Brandstätter, A., 30 Aug 2021, Polymer Meeting 14 - Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Changing morphological features in a semi-crystalline polymer in material-extrusion based additive manufacturing

    Petersmann, S., Spörk-Erdely, P., Feuchter, M., Wieme, T., Arbeiter, F. & Spoerk, M., 30 Aug 2021, Polymer Meeting 14: Book of Abstracts. Slugovec, C. & Trimmel, G. (eds.). TU Graz, p. 60 CL-A4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Curing of epoxidized plant oils with solid acid hardener

    Schwaiger, M. & Resch-Fauster, K., 30 Aug 2021, Polymer Meeting 14 : Book of Abstracts. TU Graz, p. 83 CL-A16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Bending Properties of Lightweight Copper Specimens with Different Infill Patterns Produced by Material Extrusion Additive Manufacturing, Solvent Debinding and Sintering

    Gonzalez-Gutierrez, J., Cano Cano, S., Ecker, J. V., Kitzmantel, M., Arbeiter, F., Kukla, C. & Holzer, C., 6 Aug 2021, In: Applied Sciences : open access journal. 11, 16, 7262.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Investigating the influence of surface hardness and energy on the perceived stickiness of polymer coatings.

    Griesser, M., Ules, T., Schlogl, S. & Gruber, D. P., 6 Jul 2021, 2021 IEEE World Haptics Conference, WHC 2021. Institute of Electrical and Electronics Engineers, p. 1148 1 p. (2021 IEEE World Haptics Conference, WHC 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Assessment of the chemical degradation of PFPE lubricants and greases for space applications: implications for long-term on-ground storage

    Wolfberger, A., Hausberger, A., Schlögl, S. & Hołyńska, M., Jul 2021, In: CEAS space journal. 13, 3, p. 377-388 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Characterization of crack saturation in glass fiber reinforced epoxy resins through optical methods

    Gfrerrer, M., Schneider, C., Wiener, J., Sperling, C. & Pinter, G. G., 29 Jun 2021.

    Research output: Contribution to conference › Poster › Research

  10. Published

    Effects of artificial ageing tests on EVA degradation: Influence of microclimate and methodology approach

    Barretta, C., Oreski, G., Kyranaki, N., Mansour, D. E., Betts, T. R., Bauermann, L. P. & Resch-Fauster, K., 20 Jun 2021, 2021 IEEE 48th Photovoltaic Specialists Conference, PVSC 2021. Institute of Electrical and Electronics Engineers, p. 312-315 4 p. (Conference Record of the IEEE Photovoltaic Specialists Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Crack Propagation Analysis of Compression Loaded Rolling Elements

    Dlhý, P., Poduska, J., Berer, M., Gosch, A., Slavik, O., Nahlik, L. & Hutař, P., 19 May 2021, In: Materials. 14.2021, 10, 24 p., 2656.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Klemmvorrichtung und Verfahren zur Prüfung einer Zugfestigkeit eines Objektes

    Julia, B. (Inventor), Bernd, S. (Inventor) & Franz, G. (Inventor), 15 May 2021, IPC No. G01N 3/ 04 A I, Patent No. AT523058, Priority date 10 Jan 2020, Priority No. AT20200050009

    Research output: Patent

  13. Published

    Modelling Failure Of Polymers: An Optimization Strategy Based on Genetic Algorithms and Instrumented Impact Tests

    Rueda, F., Rull, N., Quintana, C., Torres, J. P., Messiah, M., Frank, A., Arbeiter, F., Frontini, P. M. & Pinter, G., 30 Apr 2021, In: Journal of dynamic behavior of materials.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Theoretical and experimental investigations of mechanical vibrations of hot hammer forging

    Saberi, S., Fischer, J., Stockinger, M., Tikal, R. & Afsharnia, R., 20 Apr 2021, In: International Journal of Advanced Manufacturing Technology. 114.2021, 9-10, p. 3037-3045 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Electro-Thermo-Mechanical Reliability Assessment of Arbitrary Power Electronics

    Gschwandl, M., Pfost, M., Antretter, T., Fuchs, P. F., Mitev, I., Tao, Q. & Schingale, A., 19 Apr 2021, 2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021. Institute of Electrical and Electronics Engineers, 9410862. (2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Prediction of Curing Induced Residual Stresses in Polymeric Encapsulation Materials for Microelectronics

    Schipfer, C., Gschwandl, M., Fuchs, P., Antretter, T., Feuchter, M., Morak, M., Tao, Q. & Schingale, A., 19 Apr 2021, 2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021. Institute of Electrical and Electronics Engineers, 9410855. (2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Size-Induced Constraint Effects on Crack Initiation and Propagation Parameters in Ductile Polymers

    Gosch, A., Arbeiter, F. J., Agnelli, S., Berer, M. & Baldi, F., 13 Apr 2021, In: Materials. 14.2021, 8, 23 p., 1945.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Quantification Approaches for Fatigue Crack Resistance of Thermoplastic Tape Layered Composites with Multiple Delaminations

    Khudiakova, A., Brunner, A. J., Wolfahrt, M. & Pinter, G., 17 Mar 2021, In: Materials. 14.2021, 6, 23 p., 1476.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Correlation of the cyclic cracked round bar test and hydrostatic pressure test for unplasticized polyvinylchloride

    Frank, A., Messiha, M., Koch, T., Poduška, J., Hutař, P., Arbeiter, F. & Pinter, G., 19 Feb 2021, In: Polymer Testing. 95.2021, March, 7 p., 107125.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Optimization of Mechanical Properties and Damage Tolerance in Polymer-Mineral Multilayer Composites

    Wiener, J., Kaineder, H., Kolednik, O. & Arbeiter, F., 4 Feb 2021, In: Materials. 14.2021, 4, p. 1-19 19 p., 725.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Processability of Different Polymer Fractions Recovered from Mixed Wastes and Determination of Material Properties for Recycling

    Möllnitz, S., Feuchter, M., Duretek, I., Schmidt, G., Pomberger, R. & Sarc, R., 31 Jan 2021, In: Polymers. 13.2021, 3, p. 1-43 43 p., 457.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Thermal and Moisture Dependent Material Characterization and Modeling of Glass Fibre Reinforced Epoxy Laminates

    Yalagach, M., Fuchs, P., Antretter, T., Feuchter, M., Tao, Q. & Weber, M., 29 Jan 2021, In: Sensors & transducers. 248.2021, 1, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Model Calibration and Data Set Determination Considering the Local Micro-Structure for Short Fiber Reinforced Polymers

    Primetzhofer, A., Stadler, G., Pinter, G. & Grün, F., 27 Jan 2021, In: Journal of composites science. 5.2021, 2, 11 p., 40.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Quantifying matrix-fiber mechanical interactions in hyperelastic materials

    Mansouri, M. R., Beter, J., Fuchs, P. F., Schrittesser, B. & Pinter, G., 5 Jan 2021, In: International Journal of Mechanical Sciences. 195.2021, 1 April, 14 p., 106268.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Assessment of the stepped isothermal method for accelerated creep testing of high-density polyethylene

    Pilz, G., Wurzer, S., Morak, M. & Pinter, G., 2021, In: Mechanics of time-dependent materials.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Duromere Matrixsysteme aus nachwachsenden Rohstoffen für den Einsatz in naturfaserverstärkten Verbundwerkstoffen

    Todorovic, A., 2021

    Research output: Thesis › Doctoral Thesis

  27. Published

    Experimental investigation of morphological and thermomechanical properties of frontally cured carbon fibre reinforced epoxy composites

    Grasser, V., 2021

    Research output: Thesis › Master's Thesis

  28. Published

    Fully bio-based high-performance thermoset

    Todorovic, A., Blößl, Y. (Co-editor) & Resch-Fauster, K. (Co-editor), 2021.

    Research output: Contribution to conference › Poster › Research

  29. Published

    Functional hierarchical composites for structural applications

    Feuchter, M., Sieberer, M. & Kern, W., 2021, Polymer Meeting 14 - Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Investigating novel concepts to characterize the resistance against rapid crack propagation of polyamide 12 pipe grades

    Waly, C., 2021

    Research output: Thesis › Master's Thesis

  31. Published

    Investigation of mechanical anisotropy and interlayer bonding in thermoplastic composites produced by additive manufacturing

    Khudiakova, A., 2021

    Research output: Thesis › Doctoral Thesis

  32. Published

    Mechanical flexible and biodegradable thermoset with 100 % bio-based carbon content

    Schwaiger, M. & Resch-Fauster, K., 2021.

    Research output: Contribution to conference › Poster › Research

  33. Published

    Mechanical properties of layered polymers

    Arbeiter, F., 2021

    Research output: Thesis › Habilitation thesis › peer-review

  34. Published

    Morphological characterization of semi-crystalline POM using nanoindentation

    Christöfl, P., Czibula, C., Seidlhofer, T., Berer, M., Macher, A., Helfer, E., Schrank, T., Oreski, G., Teichert, C. & Pinter, G., 2021, In: International journal of polymer analysis and characterization. 26.2021, 8, p. 692-706 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Neuartige Leichtbaumaterialien mit 100% biobasiertem Kohlenstoffanteil

    Todorovic, A., Blößl, Y. & Resch-Fauster, K., 2021, In: ACstyria newsletter .

    Research output: Contribution to journal › Article › Transfer

  36. Published

    Nur mit Öl und Säure: Von der Zitronensäure zu biobasierten Hochleistungs-Composites

    Todorovic, A., Resch-Fauster, K., Blößl, Y. & Schledjewski, R., 2021, In: CU reports : internationales Mitgliedermagazin des Composites United. [Deutsche Ausgabe] . 2021, 2, p. 28-29 2 p.

    Research output: Contribution to journal › Article › Research

  37. Published

    On the viability of the Laser Flash method for fast and total thermal characterisation of polymers: Extending the limits through inverse problem solving

    Rapp, D., 2021

    Research output: Thesis › Master's Thesis

  38. Published

    Polymer fracture mechanics extended to large plastic deformation and mixed mode loading

    Gosch, A., 2021

    Research output: Thesis › Doctoral Thesis

  39. Published

    Reinforcement of elastomers to obtain anisotropic material properties

    Beter, J., 2021

    Research output: Thesis › Doctoral Thesis

  40. Published

    Viskoelastische Eigenschaften von Polyamid unter Feuchtigkeitseinfluss

    Wurzer, S., 2021

    Research output: Thesis › Master's Thesis

  41. Published

    Zerstörungsfreie in-situ-Detektion von Schädigungsprozessen bei Ermüdungsbelastung zur Charakterisierung von Faserverbundwerkstoffen

    Sperling, C., 2021

    Research output: Thesis › Master's Thesis

  42. 2020
  43. Published

    Tailored Interfaces in Fiber-Reinforced Elastomers: A Surface Treatment Study on Optimized Load Coupling via the Modified Fiber Bundle Debond Technique

    Beter, J., Maroh, B., Schrittesser, B., Mühlbacher, I., Griesser, T., Schlögl, S., Fuchs, P. F. & Pinter, G., 24 Dec 2020, In: Polymers. 13.2020, 1, p. 1-17 17 p., 36.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Fatigue characterization of polyethylene under mixed mode I/III conditions

    Gosch, A., Arbeiter, F., Berer, M., Vojtek, T., Hutař, P. & Pinter, G. G., 15 Dec 2020, In: International Journal of Fatigue. 145.2021, April, 13 p., 106084.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Development of Porous Polyurethane Implants Manufactured via Hot-Melt Extrusion

    Koutsamanis, I., Spoerk, M., Arbeiter, F., Eder, S. & Roblegg, E., 10 Dec 2020, In: Polymers. 12.2020, 12, p. 1-22 22 p., 2950.

    Research output: Contribution to journal › Article › Research › peer-review

  46. E-pub ahead of print

    Methods for automated crack length detection in fracture mechanical fatigue tests of unreinforced polymers

    Gosch, A., Geier, J., Arbeiter, F., Berer, M. & Pinter, G. G., 1 Dec 2020, (E-pub ahead of print) In: Procedia structural integrity / ESIS, European Structural Integrity Society. 28.2020, p. 1184-1192 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Damage tolerance-based methodology for fatigue lifetime estimation of a structural component produced by material extrusion-based additive manufacturing

    Arbeiter, F., Trávníček, L., Petersmann, S., Dlhý, P., Spoerk, M., Pinter, G. & Hutař, P., Dec 2020, In: Additive Manufacturing. 36, 101730.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Fully bio-based high-performance polymers

    Todorovic, A., Blößl, Y. & Resch-Fauster, K., Dec 2020.

    Research output: Contribution to conference › Poster › Research

  49. Published

    Investigation of the influence of viscoelastic behaviour on the lifetime of short fibre reinforced polymers

    Stadler, G., Primetzhofer, A., Jerabek, M., Pinter, G. & Grün, F., Dec 2020, In: Polymers. 12, 12, p. 1-13 13 p., 2874.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Comprehensive investigation of the viscoelastic properties of PMMA by nanoindentation

    Christöfl, P., Czibula, C., Berer, M., Oreski, G., Teichert, C. & Pinter, G., 27 Nov 2020, In: Polymer Testing. 93.2021, January, 9 p., 106978.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    The Tension-Twist Coupling Mechanism in Flexible Composites: A Systematic Study Based on Tailored Laminate Structures Using a Novel Test Device

    Beter, J., Schrittesser, B., Meier, G., Lechner, B., Mansouri, M., Fuchs, P. F. & Pinter, G., 24 Nov 2020, In: Polymers. 12.2020, 12, p. 1-16 16 p., 2780.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Temperature impact on the mechanical and fatigue behavior of a non-crystallizing rubber

    Schieppati, J., Schrittesser, B., Wondracek, A., Robin, S., Holzner, A. & Pinter, G., 23 Nov 2020, In: International Journal of Fatigue. 144.2021, March, 8 p., 106050.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Effect of polyethylene and polypropylene cross-contamination on slow crack growth resistance

    Messiha, M., Frank, A., Koch, T., Arbeiter, F. & Pinter, G., 16 Nov 2020, In: International journal of polymer analysis and characterization. 25, 8, p. 649-666 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    100 % bio-based high-performance epoxy resin

    Todorovic, A., Blößl, Y. & Resch-Fauster, K., 11 Nov 2020.

    Research output: Contribution to conference › Poster › Research

  55. Published

    Optimierte Polymer-Rohrwerkstoffe für effiziente Drainagesysteme in Tunnelbauwerken—PolyDrain Teil II

    Arbeiter, F., Eichinger, S., Rieß, G., Schachinger, T., Boch, R., Wenighofer, R., Galler, R., Hausberger, A., Strobl, E., Stur, M., Saliger, F., Steiner, M., Dietzel, M. & Pinter, G., 6 Nov 2020, In: Berg- und hüttenmännische Monatshefte : BHM. 165.2020, 11, p. 623-630 8 p.

    Research output: Contribution to journal › Article › Research

  56. Published

    Curing of epoxidized linseed oil: Investigation of the curing reaction with different hardener types

    Todorovic, A., Resch-Fauster, K., Mahendran, A. R., Oreski, G. & Kern, W., 4 Nov 2020, In: Journal of Applied Polymer Science. 138.2021, 16, 13 p., 50239.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Fracture of Thin-Walled Polyoxymethylene Bulk Specimens in Modes I and III

    Schrader, P., Gosch, A., Berer, M. & Marzi, S., 2 Nov 2020, In: Materials. 13, 22, p. 1-18 18 p., 5096.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Processing Conditions of a Medical Grade Poly(Methyl Methacrylate) with the Arburg Plastic Freeforming Additive Manufacturing Process

    Hentschel, L., Kynast, F., Petersmann, S., Holzer, C. & Gonzalez-Gutierrez, J., 2 Nov 2020, In: Polymers. 12, 11, p. 1-15 15 p., 2677.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Using Compliant Interlayers as Crack Arresters in 3-D-Printed Polymeric Structures

    Arbeiter, F., Petersmann, S., Wiener, J., Oesterreicher, F., Spörk, M. & Pinter, G. G., 1 Nov 2020, In: Materials Performance and Characterization. 9, 5, 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. E-pub ahead of print

    Systematic analysis of the mechanical anisotropy of fibre-reinforced polymer specimens produced by laser sintering

    Khudiakova, A., Berer, M., Niedermair, S., Plank, B., Truszkiewicz, E., Meier, G., Stepanovsky, H., Wolfahrt, M., Pinter, G. & Lackner, J., 17 Oct 2020, (E-pub ahead of print) In: Additive Manufacturing. 36.2020, December, 14 p., 101671.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Precise Correlation of Contact Area and Forces in the Unstable Friction between a Rough Fluoroelastomer Surface and Borosilicate Glass

    Wang, C., Bonyadi, S. Z., Grün, F., Pinter, G., Hausberger, A. & Dunn, A. C., 16 Oct 2020, In: Materials. 13.2020, 20, p. 1-16 16 p., 4615.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    The crucial role of external force in the estimation of the topology freezing transition temperature of vitrimers by elongational creep measurements

    Kaiser, S., Novak, P., Giebler, M., Gschwandl, M., Novak, P., Pilz, G., Morak, M. & Schlögl, S., 9 Sept 2020, In: Polymer. 204, 122804.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Investigating the influence of sample configuration on EVA degradation modes

    Barretta, C., Oreski, G., Castillon, L., Kyranaki, N., Mansour, D. E., Betts, T. R., Pitta Bauermann, L. & Resch-Fauster, K., 7 Sept 2020.

    Research output: Contribution to conference › Poster › Research

  64. Published

    J-testing of polymers via the load separation criterion based ESIS TC4 procedure: Effect of the specimen size

    Gosch, A., Arbeiter, F. J., Agnelli, S., Berer, M., Pinter, G. & Baldi, F., Sept 2020, In: Polymer Testing. 89, September, 10 p., 106637.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Review on UV-induced cationic frontal polymerization of epoxy monomers

    Malik, M. S., Schlögl, S., Wolfahrt, M. & Sangermano, M., Sept 2020, In: Polymers. 12, 9, 2146.

    Research output: Contribution to journal › Review article › peer-review

  66. Published

    Viscoelastic Behavior of Glass-Fiber-Reinforced Silicone Composites Exposed to Cyclic Loading

    Beter, J., Schrittesser, B., Lechner, B., Mansouri, M. R., Marano, C., Fuchs, P. F. & Pinter, G., 19 Aug 2020, In: Polymers. 12.2020, 9, 17 p., 1862.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Increased reliability of modified polyolefin backsheet over commonly used polyester backsheets for crystalline PV modules

    Omazic, A., Oreski, G., Edler, M., Eder, G. C., Hirschl, C., Pinter, G. & Erceg, M., 10 Aug 2020, In: Journal of Applied Polymer Science. 137.2020, 30, 8 p., 48899.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Design and characterisation of vitrimer-like elastomeric composites from HXNBR rubber

    Kaiser, S., Jandl, J., Novak, P. & Schlögl, S., 3 Aug 2020, In: Soft Matter. 16.2020, 37, p. 8577-8590 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Experimental method for creep characterization of polymeric foam materials in media immersion

    Pilz, G., Guttmann, P., Oesterreicher, F. & Pinter, G. G., 30 Jul 2020, In: Mechanics of time-dependent materials. 24.2020, December, p. 421-433 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    High-performance thermoset with 100 % bio-based carbon content

    Todorovic, A., Blößl, Y., Oreski, G. & Resch-Fauster, K., 22 Jul 2020, In: Polymer Degradation and Stability. 181.2020, November, 9 p., 109284.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Applicability of the load separation criterion in J-testing of polymers: Effect of the specimen size

    Gosch, A., Arbeiter, F., Agnelli, S., Berer, M., Pinter, G. G. & Baldi, F., 29 Jun 2020.

    Research output: Contribution to conference › Abstract

  72. Published

    Process-induced morphological features in material extrusion-based additive manufacturing of polypropylene

    Petersmann, S., Spörk-Erdely, P., Feuchter, M., Wieme, T., Arbeiter, F. & Spörk, M., 18 Jun 2020, In: Additive Manufacturing. 35.2020, October, 16 p., 101384.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Leistungsfähige Composites auf Biobasis für den Leichtbau

    Anusic, A., Blößl, Y. & Resch-Fauster, K., 2 Jun 2020, In: KC-aktuell (Informationen aus dem Kunstoff-Cluster).

    Research output: Contribution to journal › Article › Research

  74. Published

    Introduction of a new in-situ measurement system for the study of touch-feel relevant surface properties

    Ules, T., Hausberger, A., Grießer, M., Schlögl, S. & Gruber, D. P., 1 Jun 2020, In: Polymers. 12.2020, 6, 1380.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Influence of Fiber Orientation and Adhesion Properties On Tailored Fiber-reinforced Elastomers

    Beter, J., Schrittesser, B., Meier, G., Fuchs, P. F. & Pinter, G., 4 May 2020, In: Applied composite materials. 27.2020, 3, p. 149-164 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Mechanical properties of polymeric implant materials produced by extrusion-based additive manufacturing

    Petersmann, S., Spörk, M., Van De Steene, W., Üçal, M., Wiener, J., Pinter, G. G. & Arbeiter, F., 1 Apr 2020, In: Journal of the Mechanical Behavior of Biomedical Materials. 104.2020, April, 13 p., 103611.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Exploiting the Carbon and Oxa Michael Addition Reaction for the Synthesis of Yne Monomers: Towards the Conversion of Acrylates to Biocompatible Building Blocks

    Hennen, D., Hartmann, D., Rieger, P. H., Oesterreicher, A., Wiener, J., Arbeiter, F., Feuchter, M., Fröhlich, E., Pichelmayer, M., Schlögl, S. & Griesser, T., 20 Mar 2020, In: ChemPhotoChem . 4.2020, 7, p. 476-480 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Slow crack growth resistance of modern PA-U12 grades measured by cyclic cracked round bar tests and strain hardening tests

    Messiha, M., Gerets, B., Heimink, J., Frank, A., Arbeiter, F. & Engelsing, K., 3 Mar 2020, In: Polymer Testing. 86.2020, June, 11 p., 106468.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Comparison and Impact of Different Fiber Debond Techniques on Fiber Reinforced Flexible Composites

    Beter, J., Schrittesser, B., Maroh, B., Sarlin, E., Fuchs, P. F. & Pinter, G., 18 Feb 2020, In: Polymers. 12.2020, 2, 11 p., 472.

    Research output: Contribution to journal › Article › Research › peer-review

  80. E-pub ahead of print

    Flow-speed-controlled quality optimisation for one-shot-hybrid RTM parts

    Hergan, P., Fauster, E., Perkonigg, D., Pinter, G. & Schledjewski, R., 11 Feb 2020, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 6.2020, 1, p. 29-37 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Automated monitoring of the crack propagation in mode I testing of thermoplastic composites by means of digital image correlation

    Khudiakova, A., Grasser, V., Blumenthal, C., Wolfahrt, M. & Pinter, G. G., 1 Feb 2020, In: Polymer Testing. 82.2020, February, 106304.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Investigation of fibre orientation and notch support of short glass fibre lot reinforced thermoplastics

    Stadler, G., Primetzhofer, A., Pinter, G. & Grün, F., 1 Feb 2020, In: International Journal of Fatigue. 131.2020, February, 8 p., 105284.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Accelerated approaches for life-time prediction of composites under static loads

    Gloggnitzer, S., Guttmann, P. & Pinter, G., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Accelerated prediction of the long-term strength behaviour of thermoplastic materials

    Hinczica, J., 2020

    Research output: Thesis › Master's Thesis

  85. Published

    Aging Mechanism and Material Ranking of PE Pipe Grades in Aqueous Chlorine Dioxide and Hypochlorite Solutions

    Bredacs, M., 2020

    Research output: Thesis › Doctoral Thesis

  86. Published

    Bruchmechanische Untersuchungen an additiv gefertigten Bimaterial-Strukturen

    Oesterreicher, F., 2020

    Research output: Thesis › Master's Thesis

  87. Published

    Computational tools for the fatigue life modeling and prediction of composite materials and structures

    Pinter, G. G., Julia, M., Gaier, C. & Vassilopoulos, A., 2020, Fatigue Life Prediction of Composites and Composite Structures.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  88. Published

    Dynamic-mechanical Characterization of Tailor-made Elastomers for Damping Applications

    Karall, J., 2020

    Research output: Thesis › Master's Thesis

  89. Published

    Entwicklung und Optimierung eines Konzepts für die Auslegung von Schmelzrippen

    Steinschneider, S., 2020

    Research output: Thesis › Master's Thesis

  90. Published

    Influence of curing degree on the mechanical performance of polymer matrix composites

    Wolfahrt, M., Pilz, G. & Lang, R., 2020, ECCM 2018 - 18th European Conference on Composite Materials. 6 p. (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Investigation of fretting behaviors of sealing materials

    Wang, C., 2020

    Research output: Thesis › Doctoral Thesis

  92. Published

    Lifetime calculation of soil-loaded non-pressure polymer pipes

    Poduška, J., Hutař, P., Frank, A., Pinter, G. & Náhlík, L., 2020, Advances in Fracture and Damage Mechanics XVIII. Paipetis, S. A. & Aliabadi, F. M. H. (eds.). Trans Tech Publications, p. 141-146 6 p. (Key Engineering Materials; vol. 827 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Methods for automated crack length detection in fracture mechanical fatigue tests of unreinforced polymers

    Gosch, A., Geier, J., Arbeiter, F., Berer, M. & Pinter, G., 2020, In: Procedia Structural Integrity. 28, p. 1184-1192 9 p.

    Research output: Contribution to journal › Conference article › peer-review

  94. Published

    Morphology and fracture mechanical behavior of Polyoxymethylene platelets produced by injection molding under industrial-near processing conditions

    Helfer, E., 2020

    Research output: Thesis › Master's Thesis

  95. Published

    Polymers for photovoltaics: Applicability and long-term behavior

    Oreski, G., 2020

    Research output: Thesis › Habilitation thesis › peer-review

  96. Published

    Stiffness-based approach to fatigue-life prediction of composite materials

    Pinter, G. G. & Julia, M., 2020, Fatigue Life Prediction of Composites and Composite Structures.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  97. Published

    Stress intensity factors in novel specimens for crack propagation under loading conditions II+III in polymers

    Slavik, O., Hutař, P., Berer, M., Gosch, A., Vojtek, T., Arbeiter, F. & Náhlík, L., 2020, AIP Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Structural Integrity and Durability of Adhesively Bonded Joints for Composite Repair in Aircraft Applications

    Röper, F., 2020

    Research output: Thesis › Doctoral Thesis

  99. Accepted/In press

    Structural integrity of shrinkage and warpage optimized polypropylene produced by material extrusion-based additive manufacturing

    Petersmann, S., Spörk, M., Wiener, J., Pinter, G. G. & Arbeiter, F., 2020, (Accepted/In press).

    Research output: Contribution to conference › Abstract › peer-review

  100. Published

    Tailoring composite architecture to improve the toughness of pipe grade materials

    Wiener, J., Arbeiter, F., Frank, A. & Pinter, G., 2020, SPE ANTEC 2020: The Annual Technical Conference for Plastic Professionals. p. 782-786 5 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. 2019
  102. Published

    Fatigue Crack Propagation under Mixed Mode I and III in Polyoxymethelene Homopolymer

    Slavik, O., Hutař, P., Gosch, A., Berer, M., Vojtek, T., Arbeiter, F., Pinter, G. G. & Nahlik, L., 13 Dec 2019, Key Engineering Materials. 827 ed. Vol. 2019. p. 404-409 6 p. (Key Engineering Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  103. E-pub ahead of print

    Application of the material inhomogeneity effect for the improvement of fracture toughness of a brittle polymer

    Tiwari, A., Wiener, J., Arbeiter, F., Pinter, G. & Kolednik, O., 4 Dec 2019, (E-pub ahead of print) In: Engineering Fracture Mechanics. 224.2020, March, 16 p., 106776.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...17 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101