Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

51 - 100 out of 1,629Page size: 50

Research output

  1. 2024
  2. Published

    Characterization of short fiber reinforced polymers in the very high cycle fatigue regime

    Puregger, F., 2024

    Research output: Thesis › Master's Thesis

  3. Published

    Characterization of the in-situ effect in cross-ply laminates using acoustic emission analysis and optical crack detection

    Paulczinsky, L., 2024

    Research output: Thesis › Master's Thesis

  4. Published

    Characterization of the viscoelastic material properties of FR-4 materials

    Zach, D., 2024

    Research output: Thesis › Master's Thesis

  5. Published

    Effects of Printing Direction and Multi-material on Hardness of Additively Manufactured Thermoplastic Elastomers for Comfortable Orthoses and Prostheses

    Michalec, P., Varsavas, S. D., Arbeiter, F., Weidner, R. & Faller, L.-M., 2024, Additive Manufacturing in Multidisciplinary Cooperation and Production. Drstvensek, I., Pal, S. & Ihan Hren, N. (eds.). Cham: Springer International Publishing, p. 33-41 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  6. Published

    Einfluss des Rezyklat-Anteils und des Spannungsverhältnisses auf das Risswachstumsverhalten eines HDPE Blasform Typs

    Schulhofer, B., 2024

    Research output: Thesis › Master's Thesis

  7. Published

    Einfluss von Farb-Masterbatches auf adhäsive, elektrische sowie flammhemmende Eigenschaften ausgewählter technischer Thermoplaste

    Wehinger, P., 2024

    Research output: Thesis › Master's Thesis

  8. Published

    Estimating Microscopic Defect Size from Mode I, Mode II, and Mixed Mode I/II Interlaminar Delamination Propagation in GFRP and CFRP Laminates under Quasi-static Loads

    Brunner, A. J., Gfrerrer, M., Koss, V. & Pinter, G., 2024, Proceedings of the 24th European Conference on Fracture.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Flexible und biobasierte Epoxidharzsysteme: Entwicklung, Optimierung und Anwendung in hybriden Werkstoffen

    Schwaiger, M., 2024

    Research output: Thesis › Doctoral Thesis

  10. Published

    Influence of Different Manufacturing Methods and Conditions on the Fatigue Behavior of Nitrile Butadiene Rubber

    Gehling, T., 2024

    Research output: Thesis › Doctoral Thesis

  11. Published

    Influence of Process Parameters on Interfacial Adhesion, Mechanical and Thermomechanical Properties of Glass Fiber Reinforced Epoxy Resin in Printed Circuit Boards

    Obwaller, R., 2024

    Research output: Thesis › Master's Thesis

  12. Published

    Nanoindentation of polymers

    Christöfl, P., 2024

    Research output: Thesis › Doctoral Thesis

  13. Published

    Spherulite Growth and Crystallization Kinetics of Polypropylene and its blends

    Jacobs, A., 2024

    Research output: Thesis › Master's Thesis

  14. Published

    Umgebungsbedingte Spannungsrissbildung in Polyethylen: Analyse verschiedener Testmethoden

    Ladinig, A., 2024

    Research output: Thesis › Master's Thesis

  15. 2023
  16. Published

    Maßgeschneiderte Sanierungsverfahren für die Tunnelentwässerung - "DrainRepair": Teil 2: Ergebnisbericht

    Arbeiter, F., Schachinger, T., Wenighofer, R., Rieß, G., Steiner, M., Micic Batka, V., Griebaum, M., Laufer, V. & Galler, R., 7 Dec 2023, In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 12, p. 566-571 5 p.

    Research output: Contribution to journal › Article › Research

  17. Published

    Determination of creep crack growth kinetics of ABS via the C* approach at different temperatures

    Wainstein, J., Wiener, J., Arbeiter, F. & Frontini, P. M., Dec 2023, In: Results in Engineering. 20.2023, December, 9 p., 101481.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Impact of Multiple Reprocessing on Properties of Polyhydroxybutyrate and Polypropylene

    Main, P., Petersmann, S., Wild, N., Feuchter, M., Duretek, I., Edeleva, M., Ragaert, P., Cardon, L. & Lucyshyn, T., 18 Oct 2023, In: Polymers. 15.2023, 20, 24 p., 4126.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Tension-after-impact (TAI) performance and 3D damage visualization of carbon-fiber epoxy composites with adhesively bonded patch repairs

    Röper, F., Sommacal, S., Compston, P., Tauchner, J., Wolfahrt, M. & Pinter, G. G., 15 Oct 2023, In: Composite structures. 322.2023, 15 October, 11 p., 117338.

    Research output: Contribution to journal › Article › Research › peer-review

  20. E-pub ahead of print

    Investigating the impact of manufacturing conditions on crack growth rate in nitrile butadiene rubber for enhanced service life – Part 01

    Gehling, T., Kerschbaumer, R. C., Pinter, G. G., Fasching, M. A., Schwarz, T. & Schieppati, J., 7 Oct 2023, (E-pub ahead of print) In: Results in Engineering. 20.2023, December, 8 p., 101484.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Redox cationic frontal polymerization: a new strategy towards fast and efficient curing of defect-free fiber reinforced polymer composites

    Malik, M. S., Wolfahrt, M. & Schlögl, S., 4 Oct 2023, In: RSC Advances. 13.2023, 41, p. 28993-29003 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Crack penetration versus deflection in extrusion-based additive manufacturing – Impact of nozzle temperature and morphology

    Waly, C., Petersmann, S. & Arbeiter, F., Oct 2023, In: Theoretical and Applied Fracture Mechanics. 127.2023, October, 13 p., 104032.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Statistical-based optimization of fused filament fabrication parameters for short-carbon-fiber-reinforced poly-ether-ether-ketone considering multiple loading conditions

    de Carvalho, W. S., Marzemin, F., Belei, C., Petersmann, S., Arbeiter, F. & de Traglia Amancio-Filho, S., 15 Sept 2023, In: Polymer Testing. 128.2023, November, 13 p., 108207.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    UV-stabilization of linseed oil-based epoxy resin

    Schwaiger, M., Schedler, M. & Resch-Fauster, K., 4 Sept 2023.

    Research output: Contribution to conference › Poster › Research

  25. Published

    Degradation of PET – Quantitative estimation of changes in molar mass using mechanical and thermal characterization methods

    Oreski, G., Ottersböck, B., Barretta, C., Christöfl, P., Radl, S. & Pinter, G. G., Aug 2023, In: Polymer Testing. 125.2023, August, 8 p., 108130.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Optimization and manufacture of polyetheretherketone patient specific cranial implants by material extrusion: A clinical perspective

    Smith, J. A., Petersmann, S., Arbeiter, F. & Schäfer, U., Aug 2023, In: Journal of the Mechanical Behavior of Biomedical Materials. 144.2023, August, 25 p., 105965.

    Research output: Contribution to journal › Review article › peer-review

  27. E-pub ahead of print

    Concepts towards bio-inspired multilayered polymer-composites

    Wiener, J., Arbeiter, F. & Pinter, G. G., 21 Jul 2023, (E-pub ahead of print) In: Procedia Structural Integrity. 2023, 47, p. 253-260 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. E-pub ahead of print

    Investigation of expandable fillers for reversible adhesive bonding in photovoltaic modules

    Wanghofer, F., Wolfberger, A., Oreski, G., Neumaier, L. & Schlögl, S., 20 Jul 2023, (E-pub ahead of print) In: International Journal of Adhesion and Adhesives. 126.2023, August, 10 p., 103454.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Computational modelling of the separation of molten polymer blends by a centrifugal technique

    Medvid, V., Steiner, H., Irrenfried, C., Feuchter, M. & Brenn, G., 17 Jul 2023, In: Journal of polymer research. 30.2023, 8, 308.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Personalization of Complex Vaginal Inserts of Ethylene Vinyl Acetate via 3D-Printing

    Eder, S., Kuchler, L., Katschnig, M., Brandl, B., Wolfgang, M., Koutsamanis, I., Hentschel, L., Arbeiter, F., Roblegg, E. & Spoerk, M., 13 Jul 2023, In: Advanced Materials Technologies. 8.2023, 17, 15 p., 2300237.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Fatigue Behavior of Elastomeric Components: A Review of the Key Factors of Rubber Formulation, Manufacturing, and Service Conditions

    Gehling, T., Schieppati, J., Balasooriya, W., Kerschbaumer, R. C. & Pinter, G. G., 3 Jul 2023, In: Polymer reviews. 63.2023, 3, p. 763-804 42 p.

    Research output: Contribution to journal › Review article › peer-review

  32. Published

    Bioinspired fracture toughness enhancement of a fully bio-based epoxy resin

    Schwaiger, M., Waly, C., Huszar, M., Oreski, G., Feuchter, M., Arbeiter, F. & Resch-Fauster, K., Jul 2023, In: Polymer Testing. 124.2023, July, 10 p., 108098.

    Research output: Contribution to journal › Article › Research › peer-review

  33. E-pub ahead of print

    Effect of recycled material on failure by slow crack growth in multi-layer polyethylene pipes

    Trávníček, L., Poduška, J., Messiha, M., Arbeiter, F., Pinter, G. G., Náhlík, L. & Hutař, P., 14 Jun 2023, (E-pub ahead of print) In: Engineering Fracture Mechanics. 289.2023, 1 September, 18 p., 109423.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Identifying active and degraded phenolic antioxidants in aged PE with IR-microscopy

    Bredács, M., Kanatschnig, E. E., Frank, A., Oreski, G., Pinter, G. G. & Gergely, S., Jun 2023, In: Polymer Degradation and Stability. 212.2023, June, 13 p., 110345.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Comparing crack density and dissipated energy as measures for off-axis damage in composite laminates

    Drvoderic, M., Gfrerrer, M., Wiener, J., Pinter, G. G., Pletz, M. & Schuecker, C., Apr 2023, In: International Journal of Fatigue. 169.2023, April, 10 p., 107486.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Influence of Injection Molding Parameters on the Peel Strength between Plasma-Treated Fluoropolymer Films and Polycarbonate

    Hubmann, M., Groten, J., Pletz, M., Grießer, T., Plevová, K., Nemitz, W. & Stadlober, B., 21 Mar 2023, In: Polymers. 15.2023, 6, 19 p., 1568.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Tailoring the optical and UV reflectivity of CFRP-epoxy composites: Approaches and selected results

    Haiden, L., Brunner, A. J., Pansare, A. V., Feuchter, M. & Pinter, G. G., 20 Mar 2023, In: Science and Engineering of Composite Materials. 30.2023, 1, 12 p., 20220175.

    Research output: Contribution to journal › Article › Research › peer-review

  38. E-pub ahead of print

    Chiral-based mechanical metamaterial with tunable normal-strain shear coupling effect

    Fleisch, M., Thalhamer, A., Meier, G., Huber, P., Fuchs, P., Pinter, G. G., Schlögl, S. & Berer, M., 15 Mar 2023, (E-pub ahead of print) In: Engineering Structures. 284.2023, 1 June, 15 p., 115952.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Investigation of the Mechanical Properties of Sandwich Composite Panels Made with Recyclates and Flax Fiber/Bio-Based Epoxy Processed by Liquid Composite Molding

    Ravindran, B., Feuchter, M. & Schledjewski, R., 15 Mar 2023, In: Journal of composites science. 7.2023, 3, 16 p., 122.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Effects of simulated body fluid on the mechanical properties of polycarbonate polyurethane produced via material jetting

    Petersmann, S., Huemer, M., Hentschel, L. & Arbeiter, F., 6 Mar 2023, In: Polymer Testing. 120.2023, March, 10 p., 107977.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Corrigendum to “Personalised urethra pessaries prepared by material extrusion-based additive manufacturing” [Int. J. Pharm. 608 (2021) 121112] (International Journal of Pharmaceutics (2021) 608, (S0378517321009182), (10.1016/j.ijpharm.2021.121112))

    Spörk, M., Arbeiter, F., Koutsamanis, I., Cajner, H., Katschnig, M. & Eder, S., 25 Jan 2023, In: International Journal of Pharmaceutics. 631.2023, 25 January, 1 p., 122548.

    Research output: Contribution to journal › Comment/debate › peer-review

  42. Published

    Material extrusion-based additive manufacturing of polyetheretherketone cranial implants: Mechanical performance and print quality

    Petersmann, S., Smith, J. A., Schäfer, U. & Arbeiter, F., Jan 2023, In: Journal of Materials Research and Technology. 22.2023, January-February, p. 642-657 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Batch variations of post-consumer recyclates and their influence on material properties

    Schatz, L. M., 2023

    Research output: Thesis › Master's Thesis

  44. Published

    Bio-based soft composites with knitted reinforcements

    Schwaiger, M., Bender, M., Schirmer, H., Taesler, J., Kosse, S., Feuchter, M. & Resch-Fauster, K., 2023.

    Research output: Contribution to conference › Poster › Research

  45. Published

    Bio-based soft composites with knitted reinforcements

    Schwaiger, M., Bender, M., Schirmer, H., Taesler, J., Kosse, S., Feuchter, M. & Resch-Fauster, K., 2023, 31st Leoben Conference on Polymer Engineering & Science. Leoben

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    BIOBASED STRETCH FILMS – THE FUTURE OF PACKAGING?

    Feuchter, M., 2023, Polymer Meeting 15 - Book of Abstacts. p. 93 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Biomimetic concepts for the optimization of mechanical properties in layered polymeric materials

    Wiener, J., 2023

    Research output: Thesis › Doctoral Thesis

  48. Published

    Characterization of material interactions of polymers in PV modules

    Barretta, C., 2023

    Research output: Thesis › Doctoral Thesis

  49. Published

    Comparison of different measuring methods for thermo-mechanical characterization of polymer powders

    Tröscher, T., 2023

    Research output: Thesis › Master's Thesis

  50. Published

    Correlating crack density, stiffness degradation and dissipated energy during fatigue loading of ±45° GFRP laminates

    Gfrerrer, M., Wiener, J., Drvoderic, M., Brunner, A. J. & Pinter, G., 2023.

    Research output: Contribution to conference › Paper › peer-review

  51. Published

    Delamination resistance testing of fiber reinforced polymer laminates combined with acoustic emission analysis

    Koss, V., 2023

    Research output: Thesis › Master's Thesis

  52. Published

    Development and characterisation of vitrimer-like elastomers and elastomeric composites from HXNBR rubber

    Grabmayer, T., Kaiser, S., Pilz, G., Kern, W. & Schlögl, S., 2023.

    Research output: Contribution to conference › Poster › Research

Previous 1 2 3 4 5 6 7 8 ...33 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101