New-generation biocompatible Ti-based metallic glass ribbons for flexible implants

Yüce, E., Zarazúa-Villalobos, L., Ter-Ovanessian, B., Sharifikolouei, E., Najmi, Z., Spieckermann, F., Eckert, J. & Sarac, B., 13 Sept 2022, In: Materials and Design. 223.2022, November, 13 p., 111139.

Research output: Contribution to journal › Article › Research › peer-review

Prior β grain evolution and phase transformation of selective laser melted Ti6Al4V alloy during heat treatment

Lu, S. L., Zhang, Z. F., Liu, R., Qu, Z., Wang, B., Zhou, X. H., Eckert, J. & Zhang, Z., 5 Sept 2022, In: Journal of alloys and compounds. 914.2022, 5 September, 13 p., 165235.

Research output: Contribution to journal › Article › Research › peer-review

Carbon nanotube-polybutadiene-poly(ethylene oxide)-based composite fibers: Role of cryogenic treatment on intrinsic properties

Gürbüz, R., Sarac, B., Soprunyuk, V., Rezvan, A., Yüce, E., Schranz, W., Eckert, J., Ozcan, A. & Sarac, A. S., 4 Sept 2022, In: Polymers for Advanced Technologies. 33.2022, 12, p. 3966-3976 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Combining hardness measurements of a heat-treated crankshaft bearing with cross-sectional residual stress and retained austenite distributions measured by HEXRD

Mevec, D. G., Jászfi, V., Prevedel, P., Todt, J., Maawad, E., Keckes, J. & Raninger, P., 19 Aug 2022, (E-pub ahead of print) In: Materials Today Communications. 33.2022, December, 8 p., 104267.

Research output: Contribution to journal › Article › Research › peer-review

High-Entropy Alloy-Induced Metallic Glass Transformation: Challenges Posed by in situ Alloying via Additive Manufacturing

Hadibeik Neishaboori, S., Spieckermann, F., Nosko, M., Khodabakhshi, F., Heydarzadeh Sohi, M. & Eckert, J., 18 Aug 2022, (E-pub ahead of print) In: Advanced engineering materials. 24.2022, 2200764.

Research output: Contribution to journal › Article › Research › peer-review

Antibacterial activity, cytocompatibility, and thermomechanical stability of Ti₄₀Zr₁₀Cu₃₆Pd₁₄ bulk metallic glass

Rezvan, A., Sharifikolouei, E., Lassnig, A., Soprunyuk, V., Gammer, C., Spieckermann, F., Schranz, W., Najmi, Z., Cochis, A., Scalia, A. C., Rimondini, L., Manfredi, M., Eckert, J. & Sarac, B., 3 Aug 2022, In: Materials today bio. 16.2022, December, 13 p., 100378.

Research output: Contribution to journal › Article › Research › peer-review

Influence of Hatch Strategy on Crystallographic Texture Evolution, Mechanical Anisotropy of Laserbeam Powder Bed Fused S316L Steel

Bodner, S., Hlushko, K., Kutleša, K., Todt, J., Renk, O., Meindlhumer, M., Resch, F., Nielsen, M.-A., Keckes, J. & Eckert, J., 2 Aug 2022, In: Advanced engineering materials. 2022, 25 p., 2200524.

Research output: Contribution to journal › Article › Research › peer-review

100 years after Griffith: From brittle bulk fracture to failure in 2D materials

Kiener, D. & Han, S. M., Aug 2022, In: MRS Bulletin. 47.2022, August, p. 792-799 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Achieving 1 GPa fatigue strength in nanocrystalline 316L steel through recovery annealing

Renk, O., Hohenwarter, A., Gammer, C., Eckert, J. & Pippan, R., Aug 2022, In: Scripta Materialia. 217.2022, August, 5 p., 114773.

Research output: Contribution to journal › Article › Research › peer-review

Crack propagation resistance of TiAl alloys

Pippan, R. & Hohenwarter, A., Aug 2022, In: MRS Bulletin. 47.2022, 8, p. 824-831 8 p.

Research output: Contribution to journal › Review article › peer-review

In situ micromechanical analysis of a nano-crystalline W-Cu composite

Burtscher, M., Alfreider, M., Kainz, C., Schmuck, K. S. & Kiener, D., Aug 2022, In: Materials and Design. 220.2022, August, 9 p., 110848.

Research output: Contribution to journal › Article › Research › peer-review

FIB and Wedge Polishing Sample Preparation for TEM Analysis of Sol-Gel Derived Perovskite Thin Films

Sanz-Mateo, J., Deluca, M., Sartory, B., Benes, F. & Kiener, D., 20 Jul 2022, In: Ceramics. 5.2022, 3, p. 288-300 13 p.

Research output: Contribution to journal › Article › Research › peer-review

Residual stress distribution of a locally and inductively quenched and tempered 50CrMo4 steel analysed by synchrotron transmission techniques

Jászfi, V., Prevedel, P., Raninger, P., Todt, J., Mevec, D., Godai, Y., Maawad, E. & Ebner, R., 16 Jul 2022, (E-pub ahead of print) In: Materials & design. 221.2022, September, 9 p., 110936.

Research output: Contribution to journal › Article › Research › peer-review

Enhanced Oxygen Evolution Reaction of Zr-Cu-Ni-Al Metallic Glass with an Oxide Layer in Alkaline Media

Sarac, B., Ivanov, Y. P., Micusik, M., Omastova, M., Sarac, A. S., Bazlov, A. I., Zadorozhnyy, V., Greer, A. L. & Eckert, J., 14 Jul 2022, In: ACS Catalysis. 12.20220, 15, p. 9190-9200 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Mechanical behavior and deformation mechanism of shape memory bulk metallic glass composites synthesized by powder metallurgy

He, T., Lu, T., Şopu, D., Han, X., Lu, H., Nielsch, K., Eckert, J., Ciftci, N., Uhlenwinkel, V., Kosiba, K. & Scudino, S., 1 Jul 2022, In: Journal of Materials Science and Technology. 114.2022, 1 July, p. 42-54 13 p.

Research output: Contribution to journal › Article › Research › peer-review

Interaction of metallic magnesium with ammonia: Mechanochemical synthesis of Mg(NH₂)₂ for hydrogen storage

Hu, M., Sun, X., Li, B., Li, P., Xiong, M., Tan, J., Ye, Z., Eckert, J., Liang, C. & Pan, H., 25 Jun 2022, In: Journal of alloys and compounds. 907.2022, 25 June, 6 p., 164397.

Research output: Contribution to journal › Article › Research › peer-review

Fabrication of stainless-steel microfibers with amorphous-nanosized microstructure with enhanced mechanical properties

Sharifikolouei, E., Sarac, B., Zheng, Y., Bala, P. & Eckert, J., 24 Jun 2022, In: Scientific reports. 12.2022, 12 p., 10784.

Research output: Contribution to journal › Article › Research › peer-review

Influence of the 1% Ti content on microstructure, friction coefficient and contribution to the strengthening mechanisms in the Al20Sn1Cu alloy

Lucchetta, M. C., Ramasamy, P., Saporiti, F., Eckert, J. & Audebert, F. E., 22 Jun 2022, (E-pub ahead of print) In: Results in Engineering. 15.2022, September, 8 p., 100506.

Research output: Contribution to journal › Article › Research › peer-review

X-ray nanodiffraction analysis of residual stresses in polysilicon electrodes of vertical power transistors

Karner, S., Blank, O., Rösch, M., Burghammer, M., Zalesak, J., Keckes, J. & Todt, J., 20 Jun 2022, (E-pub ahead of print) In: Materialia. 24.2022, August, 6 p., 101484.

Research output: Contribution to journal › Article › Research › peer-review

Mapping Shear Bands in Metallic Glasses: From Atomic Structure to Bulk Dynamics

Sheng, H., Şopu, D., Fellner, S., Eckert, J. & Gammer, C., 16 Jun 2022, In: Physical review letters. 128.2022, 24, 6 p., 245501.

Research output: Contribution to journal › Article › Research › peer-review

Mitigating the detrimental effects of galvanic corrosion by nanoscale composite architecture design

Renk, O., Weißensteiner, I., Cihova, M., Steyskal, E.-M., Sommer, N., Tkadletz, M., Pogatscher, S., Schmutz, P., Eckert, J., Uggowitzer, P., Pippan, R. & Weinberg, A. M., 16 Jun 2022, In: npj Materials degradation. 47.2022, 6, 9 p.

Research output: Contribution to journal › Article › Research › peer-review

The importance of lamellar architecture to obtain ductility in heavily cold-worked pearlitic steels revealed by microbending experiments

Kapp, M. W., Renk, O., Eckert, J. & Pippan, R., 15 Jun 2022, In: Acta Materialia. 232.2022, 15 June, 8 p., 117935.

Research output: Contribution to journal › Article › Research › peer-review

Thermoplasticity of metallic glasses: Processing and applications

Sarac, B. & Eckert, J., Jun 2022, In: Progress in materials science. 127.2022, June, 57 p., 100941.

Research output: Contribution to journal › Review article › peer-review

Axially and radially inhomogeneous swelling in commercial 18650 Li-ion battery cells

Blazek, P., Westenberger, P., Erker, S., Brinek, A., Zikmund, T., Rettenwander, D., Wagner, N. P., Keckes, J., Kaiser, J., Kazda, T., Vyroubal, P., Macak, M. & Todt, J., 27 May 2022, (E-pub ahead of print) In: Journal of energy storage. 52.2022, 15 August, 10 p., 104563.

Research output: Contribution to journal › Article › Research › peer-review

The influence of chemistry on the interface toughness in a WTi-Cu system

Alfreider, M., Bodlos, R., Romaner, L. & Kiener, D., 15 May 2022, In: Acta Materialia. 230.2022, 15 May, 13 p., 117813.

Research output: Contribution to journal › Article › Research › peer-review

Helium-induced swelling and mechanical property degradation in ultrafine-grained W and W-Cu nanocomposites for fusion applications

Wurmshuber, M., Balooch, M., Huang, X., Hosemann, P. & Kiener, D., May 2022, In: Scripta materialia. 213.2022, May, 5 p., 114641.

Research output: Contribution to journal › Article › Research › peer-review

Additive Manufacturing of CoCrFeMnNi High-Entropy Alloy/AISI 316L Stainless Steel Bimetallic Structures

Sokkalingam, R., Chao, Z., Sivaprasad, K., Muthupandi, V., Jayaraj, J., Ramasamy, P., Eckert, J. & Prashanth, K. G., 27 Apr 2022, (E-pub ahead of print) In: Advanced engineering materials. 25.2023, 7, 9 p., 2200341.

Research output: Contribution to journal › Article › Research › peer-review

Composition design, synthesis and hydrogen storage ability of multi-principal-component alloy TiVZrNbTa

Zadorozhnyy, V., Tomilin, I., Berdonosova, E., Gammer, C., Zadorozhnyy, M., Savvotin, I., Shchetinin, I., Zheleznyi, M., Novikov, A., Bazlov, A., Serov, M., Milovzorov, G., Korol, A., Kato, H., Eckert, J., Kaloshkin, S. & Klyamkin, S., 25 Apr 2022, In: Journal of alloys and compounds. 901.2022, 25 April, 10 p., 163638.

Research output: Contribution to journal › Article › Research › peer-review

Deformation-induced medium-range order changes in bulk metallic glasses

Nomoto, K., Li, B., Gammer, C., Ceguerra, A. V., Bilal, H., Hohenwarter, A., Eckert, J., Gludovatz, B., Ringer, S. P. & Kruzic, J. J., 25 Apr 2022, In: Physical review materials . 6.2022, 4, 043603.

Research output: Contribution to journal › Article › Research › peer-review

Ca solubility in a BiFeO3‑based system with a secondary Bi2O3 phase on a nanoscale

Haselmann, U., Radlinger, T., Pei, W., Popov, M. N., Spitaler, T., Romaner, L., Ivanov, Y. P., Chen, J., He, Y., Kothleitner, G. & Zhang, Z., 21 Apr 2022, In: Journal of physical chemistry C (C, Nanomaterials and interfaces). 126.2022, 17, p. 7696-7703 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Microstructural Impact on Fatigue Crack Growth Behavior of Alloy 718

Gruber, C., Raninger, P., Maierhofer, J., Gänser, H. P., Stanojevic, A., Hohenwarter, A. & Pippan, R., 21 Apr 2022, In: Metals. 12.2022, 5, 14 p., 710.

Research output: Contribution to journal › Article › Research › peer-review

Tuning mechanical properties of ultrafine-grained tungsten by manipulating grain boundary chemistry

Wurmshuber, M., Jakob, S., Doppermann, S., Wurster, S., Bodlos, R., Romaner, L., Maier-Kiener, V. & Kiener, D., 19 Apr 2022, (E-pub ahead of print) In: Acta materialia. 232.2022, 15 June, 13 p., 117939.

Research output: Contribution to journal › Article › Research › peer-review

Maximizing the degree of rejuvenation in metallic glasses

Yuan, X., Şopu, D., Spieckermann, F., Song, K. K., Ketov, S. V., Prashanth, K. G. & Eckert, J., 15 Apr 2022, In: Scripta Materialia. 212.2022, 15 April, 5 p., 114575.

Research output: Contribution to journal › Article › Research › peer-review

Thermal stress analysis and structural optimization of ladle nozzle based on finite element simulation

Rong, Z., Yi, J., Li, F., Liu, Y. & Eckert, J., 14 Apr 2022, In: Materials Research Express. 9.2022, 4, 15 p., 045601.

Research output: Contribution to journal › Article › Research › peer-review

Oxidation resistance of cathodic arc evaporated Cr0.74Ta0.26N coatings

Kainz, C., Saringer, C., Burtscher, M., Tkadletz, M., Stark, A., Schell, N., Pohler, M., Czettl, C., Kiener, D. & Schalk, N., 1 Apr 2022, In: Scripta materialia. 211.2022, 1 April, 5 p., 114492.

Research output: Contribution to journal › Article › Research › peer-review

Influence of grain aspect-ratio on the fracture properties of ultrafine-grained tantalum

Hohenwarter, A., Rockenschaub, M. & Renk, O., Apr 2022, In: Materials and Design. 216.2022, April, 11 p., 110545.

Research output: Contribution to journal › Article › Research › peer-review

The beneficial effect of rolling on the fracture toughness and R-curve behavior of pure tungsten

Firneis, D., Wurster, S., Nikolić, V., Pippan, R. & Hohenwarter, A., 24 Mar 2022, In: Materials Science and Engineering A. 838.2022, 24 March, 8 p., 142756.

Research output: Contribution to journal › Article › Research › peer-review

Manufacturing of Textured Bulk Fe-SmCo5 Magnets by Severe Plastic Deformation

Weissitsch, L., Stückler, M., Wurster, S., Todt, J., Knoll, P., Krenn, H., Pippan, R. & Bachmaier, A., 22 Mar 2022, In: Nanomaterials. 12.2022, 6, 10 p., 963.

Research output: Contribution to journal › Article › Research › peer-review

Reactive interdiffusion of an Al film and a CoCrFeNi high-entropy alloy

Zhang, Z., Ketov, S. V., Fellner, S., Sheng, H., Mitterer, C., Song, K. K., Gammer, C. & Eckert, J., 10 Mar 2022, In: Materials and Design. 216.2022, April, 8 p., 110530.

Research output: Contribution to journal › Article › Research › peer-review

Prospects of enhancing the understanding of material-hydrogen interaction by novel in-situ and in-operando methods

Massone, A. & Kiener, D., 26 Feb 2022, In: International Journal of Hydrogen Energy . 47.2022, 17, p. 10097-10111 15 p.

Research output: Contribution to journal › Review article › peer-review

Relaxation and Strain-Hardening Relationships in Highly Rejuvenated Metallic Glasses

Yuan, X., Şopu, D., Song, K. & Eckert, J., 24 Feb 2022, In: Materials. 15.2022, 5, 10 p., 1702.

Research output: Contribution to journal › Article › Research › peer-review

Impact of Si on the high-temperature oxidation of AlCr(Si)N coatings

Jäger, N., Meindlhumer, M., Zitek, M., Spor, S., Hruby, H., Nahif, F., Julin, J., Rosenthal, M., Keckes, J., Mitterer, C. & Daniel, R., 20 Feb 2022, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 100.2022, 20 February, p. 91-100 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Nanomaterials by severe plastic deformation: review of historical developments and recent advances

Edalati, K., Bachmaier, A., Beloshenko, V. A., Beygelzimer, Y., Blank, V. D., Botta, W. J., Bryła, K., Čížek, J., Divinski, S., Enikeev, N. A., Estrin, Y., Faraji, G., Figueiredo, R. B., Fuji, M., Furuta, T., Grosdidier, T., Gubicza, J., Hohenwarter, A., Horita, Z. & Huot, J. & 29 others, Ikoma, Y., Janeček, M., Kawasaki, M., Král, P., Kuramoto, S., Langdon, T. G., Leiva, D. R., Levitas, V. I., Mazilkin, A., Mito, M., Miyamoto, H., Nishizaki, T., Pippan, R., Popov, V. V., Popova, E. N., Purcek, G., Renk, O., Révész, Á., Sauvage, X., Sklenicka, V., Skrotzki, W., Straumal, B. B., Suwas, S., Toth, L. S., Tsuji, N., Valiev, R. Z., Wilde, G., Zehetbauer, M. J. & Zhu, X., 17 Feb 2022, (E-pub ahead of print) In: Materials Research Letters. 10.2022, 4, p. 163-256 94 p.

Research output: Contribution to journal › Review article › peer-review

Cracking mechanism in a laser powder bed fused cold-work tool steel: The role of residual stresses, microstructure and local elemental concentrations

Platl, J., Bodner, S. C., Hofer, C., Landefeld, A., Leitner, H., Turk, C., Nielsen, M.-A., Demir, A. G., Previtali, B., Keckes, J. & Schnitzer, R., 15 Feb 2022, In: Acta materialia. 225.2022, 15 February, 16 p., 117570.

Research output: Contribution to journal › Article › Research › peer-review

Fracture of severely plastically deformed titanium

Völker, B., Wurster, S., Pippan, R. & Hohenwarter, A., 15 Feb 2022, In: Materials letters. 309.2022, 15 February, 4 p., 131382.

Research output: Contribution to journal › Article › Research › peer-review

Synthesis, thermodynamic analysis and magnetic study of novel ball- milled Co₅₀Fe₂₅Ta₅Si₅C₁₅ glassy powders with high thermal stability

Taghvaei, A. H., Nickjeh, H. S., Ramasamy, P. & Eckert, J., 15 Feb 2022, In: Journal of alloys and compounds. 894.2022, 15 February, 12 p., 162509.

Research output: Contribution to journal › Article › Research › peer-review

Multilayer crystal-amorphous Pd-based nanosheets on Si/SiO₂ with interface-controlled ion transport for efficient hydrogen storage

Sarac, B., Ivanov, Y. P., Karazehir, T., Mühlbacher, M., Sarac, A. S., Greer, A. L. & Eckert, J., 1 Feb 2022, In: International Journal of Hydrogen Energy . 47.2022, 10, p. 6777-6788 12 p.

Research output: Contribution to journal › Article › Research › peer-review

Nanoindentation creep behavior of an Fe–Cr–Mo–B–C amorphous coating via atmospheric plasma spraying

Dong, Q., Tan, J., Huang, R., Wang, H., Song, P., Li, C. J., Feng, Z. X., Calin, M. & Eckert, J., Feb 2022, In: Intermetallics. 141.2022, February, 9 p., 107411.

Research output: Contribution to journal › Article › Research › peer-review

Effect of supporting electrolyte on capacitance and morphology of electrodeposited poly(3,4-propylenedioxythiophene) derivatives bearing reactive functional groups

Sarac, B., Karazehir, T., Gilsing, H. D., Eckert, J. & Sarac, A. S., 31 Jan 2022, In: Molecular Systems Design and Engineering. 7.2022, 5, p. 460-479 20 p.

Research output: Contribution to journal › Article › Research › peer-review

Precipitation behavior of a Co-free Fe-Ni-Cr-Mo-Ti-Al maraging steel after severe plastic deformation

Zeisl, S., Lassnig, A., Hohenwarter, A. & Mendez Martin, F., 26 Jan 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 833.2022, 26 January, 9 p., 142416.

Research output: Contribution to journal › Article › Research › peer-review

Microstructure-dependent phase stability and precipitation kinetics in equiatomic CrMnFeCoNi high-entropy alloy: Role of grain boundaries

Daniel, R., Zalesak, J., Matko, I., Baumegger, W., Hohenwarter, A., George, E. P. & Keckes, J., 15 Jan 2022, In: Acta materialia. 223.2022, 15 January, 8 p., 117470.

Research output: Contribution to journal › Article › Research › peer-review

Thermodynamic and kinetic interpretation of the glass-forming ability of Y-containing Cu-Zr-Al bulk metallic glasses

Malekan, M., Rashidi, R., Shabestari, S. G. & Eckert, J., 15 Jan 2022, In: Journal of non-crystalline solids. 576.2022, 15 January, 8 p., 121266.

Research output: Contribution to journal › Article › Research › peer-review

Structure-dynamics relationships in cryogenically deformed bulk metallic glass

Spieckermann, F., Şopu, D., Soprunyuk, V., Kerber, M. B., Bednarčík, J., Schökel, A., Rezvan, A., Ketov, S., Sarac, B., Schafler, E. & Eckert, J., 10 Jan 2022, In: Nature Communications. 13.2022, 1, 9 p., 127.

Research output: Contribution to journal › Article › Research › peer-review

Annealing metallic glasses above T_g in order to accelerate the relaxation process in molecular dynamics simulations

Sopu, D., Yuan, X. & Eckert, J., 6 Jan 2022, In: Applied physics letters. 120.2022, 1, 011904.

Research output: Contribution to journal › Article › Research › peer-review

Morphology and properties of foamed high crystallinity PEEK prepared by high temperature thermally induced phase separation

Rusakov, D., Menner, A., Spieckermann, F., Wilhelm, H. & Bismarck, A., 5 Jan 2022, In: Journal of applied polymer science. 139, 1, 51423.

Research output: Contribution to journal › Article › Research › peer-review

Bond strength between TiN coating and microstructural constituents of a high speed steel determined by first principle calculations

Gsellmann, M., Scheiber, D., Klünsner, T., Zalesak, J., Zhang, Z., Leitner, H., Mitterer, C., Ressel, G. & Romaner, L., 1 Jan 2022, In: Acta materialia. 222.2022, 1 January, 9 p., 117439.

Research output: Contribution to journal › Article › Research › peer-review

Effect of crystal orientation on the hardness and strength of piezoelectric LiNbO3 substrates for microelectronic applications

Gruber, M., Leitner, A., Kiener, D., Supancic, P. & Bermejo, R., 2022, In: Materials and Design. 213, 110306.

Research output: Contribution to journal › Article › Research › peer-review

Film thickness and architecture effects in biaxially strained polymer supported Al/Mo bilayers

Cordill, M., Kreiml, P., Putz, B., Trost, C. O. W., Lassnig, A., Mitterer, C., Faurie, D. & Renault, P.-O., 2022, In: Materials Today Communications. 31.2022, June, 11 p., 103455.

Research output: Contribution to journal › Article › Research › peer-review

Influence of interlayers on the interfacial behavior of Ag films on polymer substrates

Cordill, M., Paulitsch, M., Katsarelis, C., Putz, B., Lassnig, A. & Kennedy, M. S., 2022, In: Thin solid films. 742, 139051.

Research output: Contribution to journal › Article › Research › peer-review

Nanobeam electron diffraction strain mapping in monocrystalline silicon of modern trench power MOSFETs

Karner, S., Blank, O., Rösch, M., Zalesak, J., Keckes, J. & Gammer, C., 2022, In: Microelectronic engineering. 264.2022, 15 August, 111870.

Research output: Contribution to journal › Article › Research › peer-review

Soft Magnetic Properties of Ultra-Strong and Nanocrystalline Pearlitic Wires

Wurster, S., Stückler, M., Weissitsch, L., Krenn, H., Hohenwarter, A., Pippan, R. & Bachmaier, A., 22 Dec 2021, In: Nanomaterials. 12.2022, 1, 11 p., 23.

Research output: Contribution to journal › Article › Research › peer-review

How electron beam melting tailors the Al-sensitive microstructure and mechanical response of a novel process-adapted y-TiAl based alloy

Wimler, D., Käsznar, K., Musi, M., Breuning, C., Markl, M., Keckes, J., Clemens, H., Körner, C. & Mayer, S., 15 Dec 2021, In: Materials and Design. 212.2021, 15 December, 13 p., 110187.

Research output: Contribution to journal › Article › Research › peer-review

A Perspective to Control Laser-Induced Periodic Surface Structure Formation at Glancing-Incident Femtosecond Laser-Processed Surfaces

Jelinek, A., Pfeifenberger, M. J., Pippan, R. & Kiener, D., Dec 2021, In: JOM. 73, 12, p. 4248–4257 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Effect of cold rolling on the pressure coefficient of glass transition temperature in bulk metallic glasses

Jana, P. P., Eckert, J. & Das, J., Dec 2021, In: Thermochimica Acta. 706.2021, December, 8 p., 179071.

Research output: Contribution to journal › Article › Research › peer-review

Quasi-static and dynamic fracture toughness of a γ-TiAl alloy: Measurement techniques, fractography and interpretation

Lintner, A., Pippan, R., Schloffer, M. & Hohenwarter, A., Dec 2021, In: Engineering Fracture Mechanics. 258.2021, December, 14 p., 108081.

Research output: Contribution to journal › Article › Research › peer-review

Transition metal-based high entropy alloy microfiber electrodes: Corrosion behavior and hydrogen activity

Sarac, B., Zadorozhnyy, V., Ivanov, Y. P., Spieckermann, F., Klyamkin, S., Berdonosova, E., Serov, M., Kaloshkin, S., Greer, A. L., Sarac, A. S. & Eckert, J., Dec 2021, In: Corrosion science. 193.2021, December, 10 p., 109880.

Research output: Contribution to journal › Article › Research › peer-review

Stainless steel reveals an anomaly in thermal expansion behavior of severely deformed materials

Renk, O., Enzinger, R. J., Gammer, C., Scheiber, D., Oberdorfer, B., Tkadletz, M., Stark, A., Sprengel, W., Pippan, R., Eckert, J., Romaner, L. & Ruban, A., 30 Nov 2021, In: Physical review materials . 5.2021, 11, 113609.

Research output: Contribution to journal › Article › Research › peer-review

Role of effective strain on the deformability of brittle Hf-based bulk metallic glass

Kim, S. Y., Park, E. S., Eckert, J. & Lee, M. H., 20 Nov 2021, (E-pub ahead of print) In: Journal of Materials Research and Technology. 15.2021, November-December, p. 6713-6720 8 p.

Research output: Contribution to journal › Article › Research › peer-review

The transverse and longitudinal elastic constants of pulp fibers in paper sheets

Czibula, C., Brandberg, A., Cordill, M. J., Matković, A., Glushko, O., Czibula, C., Kulachenko, A., Teichert, C. & Hirn, U., 17 Nov 2021, In: Scientific reports. 2021, 11, 22411.

Research output: Contribution to journal › Article › Research › peer-review

Mechanical Behavior and In Vitro Corrosion of Cubic Scaffolds of Pure Magnesium Processed by Severe Plastic Deformation

Silva, C. L. P., Camara, M. A., Hohenwarter, A. & Figueiredo, R. B., 8 Nov 2021, In: Metals. 11.2021, 11, 11 p., 1791.

Research output: Contribution to journal › Article › Research › peer-review

High-Temperature Nanoindentation of an Advanced Nano-Crystalline W/Cu Composite

Burtscher, M., Zhao, M., Kappacher, J., Leitner, A., Wurmshuber, M., Pfeifenberger, M. J., Maier-Kiener, V. & Kiener, D., 3 Nov 2021, In: Nanomaterials. 11, 11, 14 p., 2951.

Research output: Contribution to journal › Article › Research › peer-review

High-speed nanoindentation mapping of organic matter-rich rocks: A critical evaluation by correlative imaging and machine learning data analysis

Vranjes-Wessely, S., Misch, D., Kiener, D., Cordill, M. J., Frese, N., Beyer, A., Horsfield, B., Wang, C. & Sachsenhofer, R. F., 1 Nov 2021, In: International journal of coal geology. 247.2021, 1 November, 19 p., 103847.

Research output: Contribution to journal › Article › Research › peer-review

Wear Behavior of a Heat-Treatable Al-3.5Cu-1.5Mg-1Si Alloy Manufactured by Selective Laser Melting

Wang, P., Lei, Y., Qi, J. F., Yu, S.-J., Setchi, R., Wu, M. W., Eckert, J., Li, H. C. & Scudino, S., 1 Nov 2021, In: Materials. 14.2021, 22, 11 p., 7048.

Research output: Contribution to journal › Article › Research › peer-review

In Situ Synchrotron X-Ray Diffraction during High-Pressure Torsion Deformation of Ni and NiTi

Kerber, M. B., Spieckermann, F., Schuster, R., von Baeckmann, C., Fischer, T., Schell, N., Waitz, T. & Schafler, E., Nov 2021, In: Advanced engineering materials. 23, 11, 9 p., 2100159.

Research output: Contribution to journal › Article › Research › peer-review

Development of segregations in a Mg–Mn–Nd alloy during HPT processing

de Oliveira, P. C., Montoro, L. A., Perez-Prado, M. T., Hohenwarter, A., Figueiredo, R. B. & Isaac, A., 23 Oct 2021, (E-pub ahead of print) In: Materials Science and Engineering A. 802.2021, 20 January, 140423.

Research output: Contribution to journal › Article › Research › peer-review

Grain refinement effect on the Ti-45Nb alloy electrochemical behavior in simulated physiological solution

Cvijović-Alagić, I., Laketić, S., Bajat, J., Hohenwarter, A. & Rakin, M., 15 Oct 2021, In: Surface and Coatings Technology. 423.2021, 15 October, 9 p., 127609.

Research output: Contribution to journal › Article › Research › peer-review

Enhancement of Interfacial Hydrogen Interactions with Nanoporous Gold-Containing Metallic Glass

Sarac, B., Ivanov, Y. P., Micusik, M., Karazehir, T., Putz, B., Dancette, S., Omastova, M., Greer, A. L., Sarac, A. S. & Eckert, J., 15 Sept 2021, In: ACS Applied Materials and Interfaces. 13.2021, 36, p. 42613-42623 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Porosity and thickness effect of Pd–Cu–Si metallic glasses on electrocatalytic hydrogen production and storage

Sarac, B., Karazehir, T., Yüce, E., Mühlbacher, M., Sarac, A. S. & Eckert, J., 7 Sept 2021, In: Materials and Design. 210.2021, 15 November, 9 p., 110099.

Research output: Contribution to journal › Article › Research › peer-review

Effect of nanoparticles on morphology and size of primary silicon and property of selective laser melted Al-high Si content alloys

Xi, L., Guo, S., Ding, K., Prashanth, K. G., Sarac, B. & Eckert, J., Sept 2021, In: Vacuum. 191, September, 10 p., 110405.

Research output: Contribution to journal › Article › Research › peer-review

In-situ TEM investigation of toughening in Silicon at small scales

Issa, I., Gammer, C., Kolitsch, S., Hohenwarter, A., Imrich, P. J., Pippan, R. & Kiener, D., Sept 2021, In: Materials today. 48, 48, p. 29-37 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Morphology of cracks and shear bands in polymer-supported thin film metallic glasses

Glushko, O., Gammer, C., Weniger, L.-M., Sheng, H., Mitterer, C. & Eckert, J., Sept 2021, In: Materials Today Communications. 28.2021, September, 11 p., 102547.

Research output: Contribution to journal › Article › Research › peer-review

The Role of Phase Hardness Differential on the Non-uniform Elongation of a Ferrite-Martensite Dual Phase Steel

Basu, S., Jaya, B. N., Patra, A., Ganguly, S., Dutta, M., Hohenwarter, A. & Samajdar, I., Sept 2021, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 52.2021, 9, p. 4018-4032 15 p.

Research output: Contribution to journal › Article › Research › peer-review