Chair of Materials Physics (430)

Organisational unit: Chair

1001 - 1100 out of 1,985Page size: 100

Research output

  1. 2016
  2. Published

    Mechanical stability of printed metallizations on polymer substrates

    Glushko, O., Cordill, M., Klug, A. & List-Kratochvil, E. J. W., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  3. Published

    Micromechanical Characterization of Self-Organized Ti1-xAlxN Nanolamellae: The Influence of Interface Coherency and Phase Alteration on Fracture Behaviour

    Meindlhumer, M., 2016

    Research output: Thesis › Master's Thesis

  4. Published

    Microstructural and mechanical investigations of thermo-mechanically loaded Cu films using a thermal laser cycling device

    Bigl, S., Wurster, S., Cordill, M. J. & Kiener, D., 2016.

    Research output: Contribution to conference › Poster › Research

  5. Published

    Microstructure and mechanical properties of a nanocrystalline AlNbTiV high-entropy alloy

    Schuh, B., Völker, B., Li, J., Maier, V., Pippan, R. & Hohenwarter, A., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  6. Published

    Miniaturized Fracture Concepts for Stressed Multi-layer Thin Film Systems

    Konetschnik, R., Kozic, D., Schöngrundner, R., Ganser, H. P., Brunner, R. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  7. Published

    Nanoindentation testing as a tool for assessing the microstructure-property relationship of ultrafine grained and single crystalline HEAs

    Maier-Kiener, V., Schuh, B., George, E., Clemens, H. & Hohenwarter, A., 2016.

    Research output: Contribution to conference › Presentation › Research

  8. Published

    Nanokristalline High-Entropy Legierungen

    Hohenwarter, A., Schuh, B., Völker, B., Pippan, R., Maier-Kiener, V., Clemens, H. & George, E. P., 2016.

    Research output: Contribution to conference › Presentation › Research

  9. Published

    Nano-machining for advanced X-ray crystal optics

    Záprazný, Z., Korytár, D., Jergel, M., Šiffalovič, P., Halahovets, Y., Keckes, J., Matko, I., Ferrari, C., Vagovič, P. & Mikloška, M., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  10. Published

    Nanoscale Investigations of Performance-critical Regions in Non-homogeneous Metallic and Ceramic Thin Films

    Todt, J., 2016

    Research output: Thesis › Doctoral Thesis

  11. Published

    Nanostructured CVD coatings and cemented carbides-A perfect match?

    Köpf, A., Keckes, J., Todt, J., Pitonak, R. & Weissenbacher, R., 2016, World PM 2016 Congress and Exhibition.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    New advances in high pressure torsion processing

    Hohenwarter, A., Martin, R. & Pippan, R., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  13. Published

    Novel TiALN coating with special nanostructure, deposited by HR MT-CVD [Neuartige TiALN-Beschichtung mit spezieller nanostruktur, abgeschieden mittels HR MT-CVD]

    Pitonak, R., Köpf, A., Weißenbacher, R., Keckes, J. & Tod, J., 2016, In: Keramische Zeitschrift. 68, 2, p. 111-117 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Relationship between mechanical damage and electrical degradation in polymer supported metal films subjected to cyclic loading

    Glushko, O., Klug, A., List-Kratochvil, E. J. W. & Cordill, M., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Review on manufacture by selective laser melting and properties of titanium based materials for biomedical applications

    Zhang, L. C., Attar, H., Calin, M. & Eckert, J., 2016, In: Materials Technology. 31, 2, p. 66-76 11 p.

    Research output: Contribution to journal › Review article › peer-review

  16. Published

    Size effects on the electro-mechanical behavior of flexible film systems

    Cordill, M., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  17. Published

    Small scale deformation behavior of Au – influence of microstructure and temperature

    Maier-Kiener, V., Leitner, T., Kiener, D. & Pippan, R., 2016.

    Research output: Contribution to conference › Presentation › Research

  18. Published

    Spatial material heterogeneity: A strategy for fracture toughness enhancement of nanostructured films

    Daniel, R., Zalesak, J., Mitterer, C., Sartory, B., Meindlhumer, M. & Keckes, J., 2016.

    Research output: Contribution to conference › Presentation › Research

  19. Published

    Specimen preparation to analyze the fracture surface of nanocrystalline pearlite

    Sackl, S. C., Leitner, T., Turk, C., Riedl, H. & Clemens, H., 2016.

    Research output: Contribution to conference › Presentation › Research

  20. Published

    Strain-induced phase transformation of a thin Co film on flexible substrates

    Marx, V. M., Kirchlechner, C., Breitbach, B., Cordill, M., Többens, D. M., Waitz, T. & Dehm, G., 2016, In: Acta materialia.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Structural changes in amorphous SiO2 films revealed by in-situ stress measurements up to 1000C

    Bigl, S. & Cordill, M., 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  22. Published

    Structure-stress relationships in nanocrystalline multi-layered AlCrN coatings studied by cross-sectional X-ray nanodiffraction

    Klima, S., Jäger, N., Hruby, H., Mitterer, C., Keckes, J. & Daniel, R., 2016.

    Research output: Contribution to conference › Poster › Research

  23. Published

    The effect of bending loading conditions on the reliability of inkjet printed and evaporated silver metallization on polymer substrates

    Glushko, O., Cordill, M., Klug, A. & List-Kratochvil, E. J. W., 2016, In: Microelectronics Reliability.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    X-ray nanodiffraction analysis of stress oscillations in a W thin film on through-silicon via

    Todt, J., Hammer, H., Sartory, B., Burghammer, M., Kraft, J., Daniel, R., Keckes, J. & Defregger, S., 2016, In: Journal of applied crystallography. 49, p. 182-187 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. 2015
  26. Published

    Deformation-induced martensitic transformation in Cu-Zr-Zn bulk metallic glass composites

    Wu, D., Song, K., Cao, C., Li, R., Wang, G., Wu, Y., Wan, F., Ding, F., Shi, Y., Bai, X., Kaban, I. & Eckert, J., 1 Dec 2015, In: Metals : open access journal . 5, 4, p. 2134-2147 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Tracking of Grain Boundary Movement Due to (Thermo-) Mechanical Deformation

    Wurster, S., Bigl, S., Renk, O., Cordill, M. J., Hohenwarter, A., Pippan, R. & Kiener, D., 24 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  28. Published

    Fatigue threshold of ultrafine-grained and nanocrystalline metals

    Leitner, T., Hohenwarter, A. & Pippan, R., 4 Nov 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  29. Published

    In-Situ Measurements of Free-Standing, Ultra-Thin Film Cracking in Bending

    Hintsala, E., Kiener, D., Jackson, J. & Gerberich, W. W., 1 Nov 2015, In: Experimental mechanics. 55, 9, p. 1681-1690 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Designed heterogeneities improve the fracture reliability of a Zr-based bulk metallic glass

    Li, B. S., Shakur Shahabi, H., Scudino, S., Eckert, J. & Kruzic, J. J., 14 Oct 2015, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 646, p. 242-248 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Fracture behavior of high strength pearlitic steel wires

    Völker, B., Kapp, M. W., Pippan, R. & Hohenwarter, A., 5 Oct 2015.

    Research output: Contribution to conference › Poster › Research

  32. Published

    Confirming the Dual Role of Etchants during the Enrichment of Semiconducting Single Wall Carbon Nanotubes by Chemical Vapor Deposition

    Ibrahim, I., Kalbacova, J., Engemaier, V., Pang, J., Rodriguez, R. D., Grimm, D., Gemming, T., Zahn, D. R. T., Schmidt, O. G., Eckert, J. & Rümmeli, M. H., 8 Sept 2015, In: Chemistry of materials. 27, 17, p. 5964-5973 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    The influence of grain size on the fatigue crack growth of ultrafine-grained and nanocrystalline metals

    Leitner, T., Hohenwarter, A. & Pippan, R., 11 Aug 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  34. Published

    Formation of nano-porous GeOx by de-alloying of an Al-Ge-Mn amorphous alloy

    Kim, K. C., Park, S. H., Na, M. Y., Chang, H. J., Kim, W. T., Mattern, N., Eckert, J., Yokoyama, Y., Kim, K. B. & Kim, D. H., 15 Jul 2015, In: Scripta Materialia. 104.2015, 15 July, p. 49-52 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Evolution of microstructure and mechanical properties of as-cast Al-50Si alloy due to heat treatment and P modifier content

    Cao, F., Jia, Y., Prashanth, K. G., Ma, P., Liu, J., Scudino, S., Huang, F., Eckert, J. & Sun, J., 5 Jun 2015, In: Materials and Design. 74.2018, 6, p. 150-156 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Influence of annealing on microstructure and magnetic properties of cobalt-based amorphous/nanocrystalline powders synthesized by mechanical alloying

    Taghvaei, A. H., Bednarčik, J. & Eckert, J., 25 May 2015, In: Journal of alloys and compounds. 632.2015, May, p. 296-302 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    In Situ TEM Microcompression of Single and Bicrystalline Samples: Insights and Limitations

    Imrich, P. J., Kirchlechner, C., Kiener, D. & Dehm, G., 19 May 2015, In: JOM. 67, 8, p. 1704 1712 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Microstructure and chemistry evolution due to heat treatments after severe plastic deformation of a CrMnFeCoNi alloy

    Völker, B., Schuh, B. & Hohenwarter, A., 7 May 2015.

    Research output: Contribution to conference › Presentation › Research

  39. Published

    Microstructure and mechanical properties of CuxNb1- x alloys prepared by ball milling and high pressure torsion compacting

    Abad, M. D., Parker, S., Kiener, D., Primorac, M. M. & Hosemann, P., 5 May 2015, In: Journal of alloys and compounds. 630, p. 117-125 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Self-Organized TiO2/CoO Nanotubes as Potential Anode Materials for Lithium Ion Batteries

    Madian, M., Giebeler, L., Klose, M., Jaumann, T., Uhlemann, M., Gebert, A., Oswald, S., Ismail, N., Eychmüller, A. & Eckert, J., 4 May 2015, In: ACS Sustainable Chemistry and Engineering. 3, 5, p. 909-919 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Experimental Characterization and Modeling of Residual Stress Grandiens across Straight and Bent Seamless Steel Tubes

    Winter, G., Klarner, J., Staron, P., Buchmayr, B. & Keckes, J., 16 Apr 2015, p. 231 - 236.

    Research output: Contribution to conference › Presentation › Research

  42. Published

    Virtual process design for cold formed components

    Schratter, S., Keckes, J., Winter, G. & Buchmayr, B., 16 Apr 2015, Material Forming ESAFORM 2015. Trans Tech Publications, p. 1279 - 1284 (Key Engineering Materials ; vol. Vol 651-653).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Internal and external stresses: In situ TEM compression of Cu bicrystals containing a twin boundary

    Imrich, P. J., Kirchlechner, C., Kiener, D. & Dehm, G., 15 Apr 2015, In: Scripta materialia. 100, p. 94-97 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Einfluss der Korngröße auf des Rissfortschrittsverhalten von Nickel

    Leitner, T., Hohenwarter, A. & Pippan, R., 9 Apr 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    Influence of Microstructure on the Deformation Behaviour of Chromium

    Fritz, R., Wimler, D., Krautgasser, C., Leitner, A., Maier, V. & Kiener, D., 9 Apr 2015.

    Research output: Contribution to conference › Poster › Research

  46. Published

    Microstructural investigations of a nanocrystalline high-entropy alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Clemens, H. & Pippan, R., 8 Apr 2015, p. 319.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Thermally activated deformation processes in body-centered cubic Cr - How microstructure influences strain-rate sensitivity

    Maier, V., Hohenwarter, A., Pippan, R. & Kiener, D., 31 Mar 2015, In: Scripta materialia. 106, p. 42-45 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Site Specific Microstructural Evolution of Thermo-mechanically Fatigued Copper Films

    Bigl, S., Wurster, S., Cordill, M. J. & Kiener, D., 18 Feb 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 5, p. 235-239 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Small scale mechanical testing of irradiated materials

    Hosemann, P., Shin, C. & Kiener, D., 27 Jan 2015, In: Journal of materials research (JMR). 30, 9, p. 1231-1245 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Electron Backscatter Diffraction – How to read this information on polycrystalline films

    Wurster, S., Bigl, S., Renk, O., Gludovatz, B., Hohenwarter, A., Motz, C., Kiener, D. & Pippan, R., 22 Jan 2015.

    Research output: Contribution to conference › Presentation › Research

  51. Published

    Correlative characterization of primary Al3(Sc,Zr) phase in an Al-Zn-Mg based alloy

    Li, J. H., Wiessner, M., Albu, M., Wurster, S., Sartory, B., Hofer, F. & Schumacher, P., 1 Jan 2015, In: Materials characterization. 102, p. 62-70 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Direct synthesis of graphene from adsorbed organic solvent molecules over copper

    Pang, J., Bachmatiuk, A., Fu, L., Mendes, R. G., Libera, M., Placha, D., Martynková, G. S., Trzebicka, B., Gemming, T., Eckert, J. & Rümmeli, M. H., 1 Jan 2015, In: RSC Advances. 5, 75, p. 60884-60891 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Bruchmechanismen in AlSiCu Gusslegierungen

    Papenberg, N. P., 2015

    Research output: Thesis › Diploma Thesis

  54. Published

    Characterization of fatigue crack growth with the configurational force concept

    Ochensberger, W., 2015

    Research output: Thesis › Doctoral Thesis

  55. Published

    Combined atomic force and electron microscopy instrumentation to study microscale plasticity

    Kreith, J., 2015, 108 p.

    Research output: Thesis › Doctoral Thesis

  56. Published

    Copper diffusion into single-crystalline TiN studied by transmission electron microscopy and atom probe tomography

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Schalk, N., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2015, In: Thin solid films. 574, p. 103-109

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Cryogenic nanoindentation of single crystalline Copper, Chromium and Tungsten

    Esterl, R., 2015, 71 p.

    Research output: Thesis › Diploma Thesis

  58. Published

    Cyclic bending experiments on free-standing Cu micron lines observed by electron backscatter diffraction

    Wimmer, A. C., Heinz, W., Detzel, T., Robl, W., Nellessen, M., Kirchlechner, C. & Dehm, G., 2015, In: Acta materialia. 83, p. 460-469

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Deformation behavior of ultra-fine porous Au

    Leitner, A., Maier-Kiener, V., Hosemann, P. & Kiener, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  60. Published

    Deformation mechanisms of single crystal Mg studied by in-situ SEM and TEM micromechanical testing

    Kiener, D., Alfreider, M., Jeong, J. & Oh, S. H., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  61. Published

    Deformation mechanisms of single crystal Mg studied by in-situ SEM and TEM micromechanical testing

    Kiener, D., Alfreider, M., Jeong, J. & Oh, S. H., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  62. Published

    Determination of residual stresses and fracture properties on a local scale

    Kiener, D., Treml, R., Kozic, D., Brunner, R., Keckes, J. & Zechner, J., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  63. Published

    Dry-blasting of CVD α-Al2O3 hard coatings: Influence of blasting media size, hardness and coating texture on the stress-depth gradients investigated by X-ray nanodiffraction

    Tkadletz, M., Schalk, N., Keckes, J., Krajinovic, I., Czettl, C. & Mitterer, C., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  64. Published

    Elevated temperature mechanical properties of novel ultra-fine grained Cu-Nb composites

    Primorac, M.-M., Abad, M. D., Hosemann, P., Kreuzeder, M., Maier, V. & Kiener, D., 2015, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 625, p. 296-302

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Evaluation of TiN diffusion barrier layers with different microstructures by transmission electron microscopy and atom probe tomography

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Chitu, L., Lu, J., Schalk, N., Keckes, J., Hultman, L. & Mitterer, C., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  66. Published

    Experimental characterization and modelling of triaxial residual stresses in straightened railway rails

    Kaiser, R., Stefenelli, M., Hatzenbichler, T., Antretter, T., Hofmann, M., Keckes, J. & Buchmayr, B., 2015, In: The Journal of Strain Analysis for Engineering Design. 50, 3, p. 190-198 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Fabrication and thermo-mechanical behavior of ultra-fine porous copper

    Kreuzeder, M., Abad, M. D., Primorac, M.-M., Hosemann, P., Maier, V. & Kiener, D., 2015, In: Journal of materials science. 50, p. 634-643

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Fracture and fracture toughness of nanopolycrystalline metals produced by SPD

    Hohenwarter, A., Völker, B., Kapp, M. & Pippan, R., 2015.

    Research output: Contribution to conference › Presentation › Research

  69. Published

    Fracture in severely plastically deformed metals - How toughness can be improved

    Hohenwarter, A., Völker, B., Leitner, T., Renk, O. & Pippan, R., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  70. Published

    Fracture resistance of pearlitic steels

    Hohenwarter, A., Völker, B., Kapp, M. & Pippan, R., 2015.

    Research output: Contribution to conference › Presentation › Research

  71. Published

    How Residual Stresses Affect the Fracture Properties of Layered Thin Films

    Kiener, D., Treml, R., Kozic, D., Zalesak, J., Zechner, J., Keckes, J., Schöngrundner, R., Gänser, H.-P. & Brunner, R., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  72. Published

    Improved electro-mechanical performance of gold films on polyimide without adhesion layers

    Putz, B., Schoeppner, R., Glushko, O., Bahr, D. F. & Cordill, M., 2015, In: Scripta materialia. p. 23-26

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Incremental high pressure torsion as a novel severe plastic deformation process: Processing features and application to copper

    Hohenwarter, A., 2015, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 626, p. 80-85

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Influence of Residual Stresses on the Fracture Properties of Multilayer Films

    Kiener, D., Treml, R., Kozic, D., Zechner, J., Maeder, X., Schöngrundner, R. & Brunner, R., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  75. Published

    Investigation of residual stress gradients in alpha-Al2O3 coatings introduced by post-deposition blasting treatments using synchrotron X-ray nanodiffraction

    Tkadletz, M., Keckes, J., Schalk, N., Krajinovic, I., Czettl, C. & Mitterer, C., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  76. Published

    Kinetics and mechanism of the biodegradation of PLA/clay nanocomposites during thermophilic phase of composting process

    Stloukal, P., Pekarova, S., Kalendova, A., Mattausch, H., Laske, S., Holzer, C., Chitu, L., Bodner, S., Maier, G., Slouf, M. & Koutny, M., 2015, In: Waste management. 42, p. 31-40 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Local Determination of Residual Stresses and Fracture Properties Using In-situ Testing in the SEM

    Kiener, D., Treml, R., Kozic, D., Schöngrundner, R. & Brunner, R., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  78. Published

    Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation

    Schuh, B., Mendez Martin, F., Völker, B., George, E. P., Clemens, H., Pippan, R. & Hohenwarter, A., 2015, In: Acta materialia. 96, p. 258-268

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Mechanical property enhancement in laminates through control of morphology and crystal orientation

    Zeilinger, A., Daniel, R., Stefenelli, M., Sartory, B., Chitu, L., Burghammer, M., Schöberl, T., Kolednik, O., Keckes, J. & Mitterer, C., 2015, In: Journal of physics / D, Applied physics. 48, p. 2953031-2953039

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Mechanische Eigenschaften hochverformter Titanlegierungen

    Jäger, N., 2015

    Research output: Thesis › Diploma Thesis

  81. Published

    Microstructural design: a successful strategy for fracture toughness enhancement of hard coatings

    Daniel, R., Zalesak, J., Mitterer, C., Sartory, B., Meindlhumer, M. & Keckes, J., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  82. Published

    Microstructure-controlled depth gradients of mechanical properties in thin nanocrystalline films: Towards structure-property gradient functionalization

    Daniel, R., Zeilinger, A., Schöberl, T., Sartory, B., Mitterer, C. & Keckes, J., 2015, In: Journal of applied physics. 117, 23, p. 235301-1-235301-12

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Nanoindentation of ultrafine grained and single crystalline Chromium and Tantalum at elevated temperatures

    Pörnbacher, J., 2015, 132 p.

    Research output: Thesis › Diploma Thesis › peer-review

  84. Published

    Nanomechanische Verformungsprozesse – In situ Erkenntnisse aus dem Transmissionselektronenmikroskop

    Kiener, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  85. Published

    Novel methods for the site specific preparation of micromechanical structures

    Wurster, S., Treml, R., Fritz, R., Kapp, M. W., Langs, E., Alfreider, M., Ruhs, C., Imrich, P. J., Felber, G. & Kiener, D., 2015, In: Practical metallography = Praktische Metallographie. 52, 3, p. 131-146 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Pencil-beam X-ray nanodiffraction on CVD α-Al2O3 hard coatings with grain sizes in the micrometer range

    Tkadletz, M., Keckes, J., Schalk, N., Czettl, C. & Mitterer, C., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  87. Published

    Phase decomposition of a nanocrystalline CoCrFeMnNi high-entropy alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Clemens, H., Völker, B., Pippan, R. & George, E. P., 2015.

    Research output: Contribution to conference › Poster › Research

  88. Published

    Phase decomposition of a nanocrystalline CoCrFeMnNi high-entropy alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Clemens, H., George, E. P., Völker, B. & Pippan, R., 2015.

    Research output: Contribution to conference › Presentation › Research

  89. Published

    Probing thermally activated properties on a local scale

    Kiener, D., Leitner, A. & Maier-Kiener, V., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  90. Published

    Quantitative testing in the electron microscope - Insights into small scale plasticity

    Kiener, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  91. Published

    Quantitative testing in the electron microscope – Insights into small scale plasticity

    Kiener, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  92. Published

    Recent developments in miniaturized fracture testing in the SEM and TEM

    Kiener, D., Treml, R., Kozic, D., Schöngrundner, R., Hintsala, E. & Gerberich, W. W., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  93. Published

    Recent progress in advanced characterization methods for the development of hard coatings: From improved composition/microstructure/property relations to insights in degradation behavior

    Mitterer, C., Mühlbacher, M., Zeilinger, A., Stefenelli, M., Daniel, R., Tkadletz, M., Schalk, N., Sartory, B. & Keckes, J., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  94. Published

    Recent Progress in Printed 2/3D Electronic Devices

    Klug, A., Popovic, K., Blümel, A., Sax, S., Lenz, M., Glushko, O., Cordill, M. & List-Kratochvil, E. J. W., 2015, Proceedings of SPIE: Printed Memory and Circuits. Vol. 9569.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  95. Published

    Recovery phenomena in severely deformed metals

    Renk, O., 2015

    Research output: Thesis › Doctoral Thesis

  96. Published

    Residual stress gradients in alpha-Al2O3 hard coatings determined by pencil-beam X-ray nanodiffraction: The influence of blasting media

    Tkadletz, M., Keckes, J., Schalk, N., Krajinovic, I., Burghammer, M., Czettl, C. & Mitterer, C., 2015, In: Surface & coatings technology. 262, p. 134-140 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Resolving depth evolution of microstructure and hardness in sputtered CrN film

    Zeilinger, A., Daniel, R., Schöberl, T., Stefenelli, M., Sartory, B., Keckes, J. & Mitterer, C., 2015, In: Thin solid films. 581.2015, April, p. 75-79

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Rissfortschritt in duktilen Stählen unter zyklischer Belastung: Einfluss des Herstellungsverfahrens und der Lastgeschichte

    Zhou, X., 2015

    Research output: Thesis › Doctoral Thesis

  99. Published

    Software Package to evaluate two-dimensional X-ray nanodiffraction data from thin films

    Keckes, J., Stefenelli, M., Todt, J., Mitterer, C., Daniel, R. & Keckes, J., 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  100. Published

    TEM investigations on interactions of dislocations with boundaries

    Imrich, P. J., 2015

    Research output: Thesis › Doctoral Thesis

  101. Published

    Temperature-dependent deformation of ufg materials and composites

    Maier-Kiener, V., Leitner, A., Kreuzeder, M., Primorac, M.-M., Hosemann, P. & Kiener, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  102. Published

    Texturentwicklung nanokristalliner W-Cu Komposite

    Rodriguez Chavez, A., 2015

    Research output: Thesis › Diploma Thesis

Previous 1...7 8 9 10 11 12 13 14 ...20 Next
View graph of relations

Contact information

Jahnstrasse 12/I, 8700 Leoben
  • Main phone number: +43 3842 804 112