Chair of Ceramics (320)

Organisational unit: Chair

1 - 100 out of 534Page size: 100

Research output

  1. 2025
  2. Published

    Application of coupled CFD-DEM modelling in erosion study of cohesive materials: A case study of rotating finger test

    Rahimilarki, M., Burhanuddin, B., Vollmann, S., Jin, S. & Harmuth, H., 23 Jan 2025, In: Results in Engineering. 25.2025, March, 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2024
  4. Published

    Artificial neural network model for estimating mold flux melting temperature

    Mapelli, C., Mombelli, D., Dall'osto, G., Cho, J., Gruber, N., Marschall, I., Cornille, M., Alloni, M. & Carli, R., 15 Dec 2024, In: ISIJ international. 64.2014, 14, p. 2008-2019 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Erosion Behavior of Coarse-Grained Alumina in Corrosive Melts: Experimental and Computational Studies with CAS and CASM Slags

    Guarco, J., Vollmann, S., Harmuth, H. & Burhanuddin, B., 19 Nov 2024.

    Research output: Contribution to conference › Paper › peer-review

  6. Published

    Fracture process zone modelling of a magnesia spinel refractory using phase field fracture model

    Ali, Z., Jin, S. & Gruber, D., 15 Nov 2024, In: Finite elements in analysis and design. 242.2024, December, 12 p., 104279.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Utilization of recovered refractory material as slag additive and experimental determination of liquid slag properties

    Moll, S., Marschall, I., Schlemmer, N., Halwax, A., Kek, F. W., Weiß, C. & Eisbacher-Lubensky, J., 30 Oct 2024.

    Research output: Contribution to conference › Presentation › Research

  8. Published

    Design of a new ceramic castable for investment casting of turbine blades

    Smedes, M., Gruber, D. & Zhang, W., 15 Oct 2024.

    Research output: Contribution to conference › Presentation › Research

  9. Published

    Creep strain recovery of a refractory castable under loading/unloading conditions

    Gruber, D., Akbari, B. & Harmuth, H., 18 Sept 2024, Proceedings of International Colloquium on Refractories: ICR 2024.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Microstructural changes in high alumina refractory due to hydrogen exposure

    Bohorquez Moreno, C. & Gruber, D., 18 Sept 2024, Proceedings of International Colloquium on Refractories: ICR 2024.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Coupled CFD-DEM Simulation of Flow-Induced Erosion in Cohesive Materials

    Vollmann, S., Rahimilarki, M. & Jin, S., Sept 2024.

    Research output: Contribution to conference › Abstract › peer-review

  12. Published

    Flow-induced erosion modelling of cohesive material with coupled CFD-DEM approach

    Rahimilarki, M., Vollmann, S. & Jin, S., 27 Aug 2024, In: Minerals engineering. 217.024, October, 15 p., 108947.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Finite Element modelling of refractories fracture process zone with gradient enhanced damage models

    Ali, Z. & Gruber, D., 26 Aug 2024.

    Research output: Contribution to conference › Presentation › Research

  14. Published

    Experimental, analytical, and numerical quantification of the Marangoni effect in static refractory finger test

    Vollmann, S., Guarco, J. & Burhanuddin, B., 28 Jun 2024, In: Ceramics International : CI. 50.2024, 18, Part B, p. 33953-33967 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Effect of Slag Basicity on Alumina Dissolution and Diffusivity: A High-temperature Confocal Laser Scanning Microscopy Study

    Burhanuddin, B. & Harmuth, H., 15 Jun 2024, In: China's refractories. 33.2024, 2, p. 27-34 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Brittleness reduction of low-carbon Al2O3-C refractories with in-situ formation MgAl2O4/CNTs layer between aggregate and matrix

    Luo, J., Jin, S., Chong, X., Ding, D. & Xiao, G., Apr 2024, In: Journal of the European Ceramic Society. 44.2024, 4, p. 2620-2629 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Determination of the influence of particle spatial distribution and interface heterogeneity on tensile fracture of ordinary refractory ceramics by applying discrete element modelling

    Du, W., Jin, S. & Gruber, D., 21 Mar 2024, In: Computational particle mechanics. 11.2024, 5, p. 1887-1901 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Finite element modelling of refractories fracture process zone with gradient enhanced damage models

    Ali, Z., Jin, S. & Gruber, D., 21 Mar 2024, In: Finite elements in analysis and design. 234.2024, July, 15 p., 104151.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Steel Ladle Slag Zone Lining Optimization Considering Irreversible Material Behavior

    Klopf, M., Hou, A., Jin, S. & Gruber, D., 13 Mar 2024, In: Steel research international. 95.2024, 7, 10 p., 2300557.

    Research output: Contribution to journal › Article › Research › peer-review

  20. E-pub ahead of print

    Determining the critical Reynolds number for suppressing Marangoni convection of alumina in silicate melt

    Burhanuddin, B., Harmuth, H. & Vollmann, S., 29 Feb 2024, (E-pub ahead of print) In: Ceramics International : CI. 50.2024, 11 Part A, p. 18323-18328 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    A Modified Rotating-Finger Test Aiming to Quantify Refractory Wear Based on Fundamental Equations Governing Refractory Dissolution and Erosion

    Burhanuddin, B. & Harmuth, H., 6 Feb 2024, Advances in Pyrometallurgy: Furnace Containment. Springer, p. 119-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Creep and creep strain recovery of a spinel forming refractory castable - measurement and simulation

    Akbari, B., 2024

    Research output: Thesis › Doctoral Thesis

  23. Published

    Dynamic wetting phenomena of CaO-SiO2-Al2O3-Li2O slag on magnesia

    Ijaz, M. U., 2024

    Research output: Thesis › Master's Thesis

  24. Published

    Effect of liquefaction controlling components in carbon-free mould powder for the continuous casting of ultra-low carbon steels

    Gruber, N., 2024, MOLTEN 2024 Conference Proceedings: 12th International Conference on Molten Slags, Fluxes and Salts. Hayes, P. & Jak, E. (eds.). Carlton Victoria, Australia, Vol. 3/2024. p. 979-996 18 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Ein mineralisches Bindemittel auf Basis Olivin

    Lackner, L., 2024

    Research output: Thesis › Master's Thesis

  26. Published

    Thermomechanische Charakterisierung eines feuerfesten Alumina Carbon Materials

    Bleidt, M., 2024

    Research output: Thesis › Master's Thesis

  27. 2023
  28. Published

    Large mechanical properties enhancement in ceramics through vacancy-mediated unit cell disturbance

    Chen, Z., Huang, Y., Koutná, N., Gao, Z., Sangiovanni, D., Fellner, S., Haberfehlner, G., Jin, S., Mayrhofer, P. H., Kothleitner, G. & Zhang, Z., 16 Dec 2023, In: Nature Communications. 14.2023, 1, 11 p., 8387.

    Research output: Contribution to journal › Article › Research › peer-review

  29. E-pub ahead of print

    Untersuchung der Performance eines fluorfreien Gießpulvers auf einer Pilotanlage

    Riedler, S., Gruber, N., Marschall, I., Ilie, V.-S. & Klösch, G., 27 Oct 2023, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 11, p. pages 515–520 6 p.

    Research output: Contribution to journal › Article › Research

  30. Published

    Einfluss von Kohlenstoff auf das Aufschmelzverhalten eines Gießpulvers bei hohen Heizraten

    Gruber, N., 25 Oct 2023, In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 10, p. 521–526 6 p.

    Research output: Contribution to journal › Article › Research

  31. Published

    Analyzing crack deflection behavior of refractories by digital image correlation

    Fruhstorfer, J., Gruber, D. & Harmuth, H., 12 Sept 2023, In: AIP Conference Proceedings. 2894, 1, 020002.

    Research output: Contribution to journal › Conference article › peer-review

  32. Published

    Liquefaction Controlling Components and Their Effect on Carbon-Free Mold Powders

    Gruber, N., 30 Aug 2023, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 54.2023, December, p. pages 3092–3100 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Dissolution of Magnesia in Silicate Melts and Diffusivity Determination from CLSM Studies

    Burhanuddin, B. & Harmuth, H., 21 Jul 2023, In: Applied Sciences : open access journal. 13.2023, 14, p. 8458 8 p., 8458.

    Research output: Contribution to journal › Article › Research › peer-review

  34. E-pub ahead of print

    Morphology characterization for refractory aggregates

    Wu, M. & Jin, S., 14 Jul 2023, (E-pub ahead of print) In: Open ceramics. 15.2023, September, 7 p., 100408.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Calculation of mass transfer for rotating finger test equipment

    Burhanuddin, B., Harmuth, H. & Guarco, J., 4 Jul 2023.

    Research output: Contribution to conference › Presentation › Research

  36. Published

    Evaluation of Slag Foaming Behavior Using Renewable Carbon Sources in Electric Arc Furnace-Based Steel Production

    Kieush, L., Schenk, J., Koveria, A., Hrubiak, A., Hopfinger, H. & Zheng, H., 12 Jun 2023, In: Energies. 16.2023, 12, 25 p., 4673.

    Research output: Contribution to journal › Article › Research › peer-review

  37. E-pub ahead of print

    Nanoscale toughening of low carbon Al2O3-C refractories by means of SiCnw/Al2O3 composite reinforcement

    Chong, X., Luo, J., Ding, D., Jin, S. & Xiao, G., 9 Jun 2023, (E-pub ahead of print) In: Journal of the American Ceramic Society. 106.2023, 11, p. 6891-6910 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. E-pub ahead of print

    A methodology for performing and evaluating miniaturized wedge splitting tests accompanied by digital image correlation

    Fruhstorfer, J. & Gruber, D., 30 May 2023, (E-pub ahead of print) In: Engineering Fracture Mechanics. 288.2023, 4 August, 15 p., 109357.

    Research output: Contribution to journal › Article › Research › peer-review

  39. E-pub ahead of print

    Creep strain recovery of an in situ spinel-forming refractory castable under loading/unloading compressive creep conditions

    Akbari, B., Gruber, D., Jin, S. & Harmuth, H., 17 May 2023, (E-pub ahead of print) In: Ceramics International. 49.2023, 15, p. 25225-25231 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. E-pub ahead of print

    Determination of cohesion and friction angle of a MgO-C refractory at room and elevated temperatures

    Klopf, M. & Gruber, D., 9 May 2023, (E-pub ahead of print) In: Open ceramics. 14.2023, June, 6 p., 100369.

    Research output: Contribution to journal › Article › Research › peer-review

  41. E-pub ahead of print

    Anisotropy of fracture mechanical properties of carbon-containing refractories and its impact on cracking in a steel ladle lining

    Gruber, D., Schachner, S. & Harmuth, H., 2 May 2023, (E-pub ahead of print) In: Open ceramics. 14.2023, June, 5 p., 100363.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Utilization of Renewable Carbon in Electric Arc Furnace-Based Steel Production: Comparative Evaluation of Properties of Conventional and Non-Conventional Carbon-Bearing Sources

    Kieush, L., Schenk, J., Koveria, A., Rantitsch, G., Hrubiak, A. & Hopfinger, H., 6 Apr 2023, In: Metals. 13.2023, 4, 16 p., 722.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Auswirkung der Reduktion des SiC-Gehalts eines Gießpulvers auf dessen Aufschmelzverhalten

    Lintner, K., 2023

    Research output: Thesis › Master's Thesis

  44. Published

    Implementierung einer klinkerärmeren Zementsorte CEM II/B-M 42,5N mit getrennter Mahlung von Kalkstein

    Erlacher, T., 2023

    Research output: Thesis › Master's Thesis

  45. Published

    Optimization of Operation Conditions for Refractory Corrosion Tests in a High Frequency Induction Furnace

    Wagner, M., 2023

    Research output: Thesis › Master's Thesis

  46. Published

    Preparation of Al2O3-SiO2-SiC Castable for KR Stirring Head and Multiphase Flow Numerical Simulation of Desulfurization Process

    Li, Z., 2023

    Research output: Thesis › Master's Thesis

  47. Published

    Simulation and Post-mortem Studies: The Holistic Approach for Optimized and Engineered Lining Concepts

    Gregurek, D., Unterreiter, G., Lind, C. & Spanring, A., 2023, The Minerals, Metals & Materials Series.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  48. Published

    Synthesis of Yttrium Ferrite Near Infrared Reflective Materials

    Li, Y., 2023

    Research output: Thesis › Master's Thesis

  49. Published

    Untersuchung zur Klärung der Struktur von nichtmetallischen Einschlüssen im Stahl

    Theussl, O., 2023

    Research output: Thesis › Master's Thesis

  50. 2022
  51. Published

    Quantification of Magnesia Dissolution in Silicate Melts and Diffusivity Determination Using Rotating Finger Test

    Burhanuddin, B., Harmuth, H. & Vollmann, S., 13 Dec 2022, In: Applied Sciences : open access journal. 12.2022, 24, 13 p., 12791.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Effect of carbon on the melting behavior of a mold powder under high heating rates

    Gruber, N., Dec 2022.

    Research output: Contribution to conference › Presentation › Research

  53. Published

    Method for inverse calculation of erosion parameters in slag-refractory systems

    Guarco, J., Vollmann, S., Harmuth, H. & Burhanuddin, B., Dec 2022, In: Materials Today Communications. 33.2022, December, 10 p., 104736.

    Research output: Contribution to journal › Article › Research › peer-review

  54. E-pub ahead of print

    Thermal expansion and Young's modulus evolution of fused silica and crystalline silica-containing materials

    Yin, Y., Jin, S., Zhu, Q., Dai, Y., Li, Y. & Xia, Z., 30 Nov 2022, (E-pub ahead of print) In: International journal of applied ceramic technology. 20.2023, 3, p. 1875-1886 12 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  55. Published

    Discrete Element Modelling of Cold Crushing Tests Considering Various Interface Property Distributions in Ordinary Refractory Ceramics

    Du, W. & Jin, S., 31 Oct 2022, In: Materials. 15.2022, 21, 18 p., 7650.

    Research output: Contribution to journal › Article › Research › peer-review

  56. E-pub ahead of print

    Multi-Response Optimization of the Thermal and Thermomechanical Behavior of a Steel Ladle Lining using Grey Relational Analysis and Technique for Order Preference by Similarity to Ideal Solution

    Hou, A., Gruber, D. & Jin, S., 23 Sept 2022, (E-pub ahead of print) In: Steel research international. 94.2023, 1, 10 p., 2200407.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Influence of the Fine Fraction and Sintering on Selected Isotropic and Anisotropic Bulk Properties of Uniaxial Compacts

    Fruhstorfer, J., Wagner, M., Gruber, D. & Harmuth, H., 14 Sept 2022, In: Interceram. 71.2022, September, p. 38-47 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. E-pub ahead of print

    Effect of microporous aggregates and spinel powder on fracture behavior of magnesia-based refractories

    Yan, J., Dai, Y., Yan, W., Jin, S., Wang, X. & Li, Y., 13 Sept 2022, (E-pub ahead of print) In: Journal of the European Ceramic Society. 42.2022, 16, p. 7648-7655 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  59. E-pub ahead of print

    Zirconium oxycarbides and oxycarbonitrides: A review

    Kucheryavaya, A., Lenčéš, Z., Šajgalík, P. & Harmuth, H., 30 Aug 2022, (E-pub ahead of print) In: International journal of applied ceramic technology. 20.2023, 2, p. 541-562 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. E-pub ahead of print

    Sherwood correlation for finger-test experiments

    Guarco, J., Burhanuddin, Vollmann, S. & Harmuth, H., 27 Aug 2022, (E-pub ahead of print) In: Results in Engineering. 15.2022, September, 5 p., 100610.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Image-processing-based automatic crack detection and classification for refractory evaluation

    Wang, G., Tan, F., Jin, S., Pan, L., He, Z., Wang, X., Li, Y. & Li, J., 15 Aug 2022, In: Ceramics International. 48.2022, 16, p. 23232-23240 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Creep characterization and modelling of ordinary refractory ceramics under combined compression and shear loading conditions

    Schachner, S., Jin, S., Gruber, D. & Harmuth, H., 1 Aug 2022, In: Ceramics International. 48.2022, 15, p. 21101-21109 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Mixed-mode fracture behaviour of refractories with asymmetric wedge splitting test: Part II: Experimental case study

    Dai, Y. J., Jin, S., Zhou, R., Li, Y. W., Harmuth, H. & Tschegg, E. K., 15 Jul 2022, In: Ceramics International. 48.2022, 14, p. 19757-19766 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Mixed-mode fracture behaviour of refractories with asymmetric wedge splitting test: Part I: Numerical implementation and validation

    Dai, Y., Jin, S., Li, Y. W., Wang, Q., Zhou, W. & Harmuth, H., 15 Jul 2022, In: Ceramics International. 48.2022, 14, p. 19767-19775 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. E-pub ahead of print

    Improving Tapping Experience — and Why to Choose a Comprehensive Approach

    Gregurek, D., Wenzl, C., Unterreiter, G., Vukovic, G. & Marschall, H. U., 8 Jul 2022, (E-pub ahead of print) In: JOM. 74.2022, 11, p. 3999–4008 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Corrigendum to “Asymmetric creep modeling of common refractory ceramics with high temperature wedge splitting test” [Eng. Fract. Mech. 25 (2021) 107819

    Jin, S. & Harmuth, H., Jul 2022, 1 p.

    Research output: Other contribution › Research

  67. Published

    Contributions to Crack Propagation in Coarse Grained Refractories

    Gruber, D. & Harmuth, H., 22 Jun 2022.

    Research output: Contribution to conference › Presentation › Research

  68. Published

    Discrete element modelling of ordinary refractory ceramics under cold crushing testing: Influence of minimum element size

    Du, W., Jin, S., Emam, S., Gruber, D. & Harmuth, H., 15 Jun 2022, In: Ceramics International. 48.2022, 12, p. 17934-17941 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Evaluation of CLSM measurements for dissolution studies: A case study investigating alumina dissolution in a silicate slag

    Harmuth, H. & Burhanuddin, B., 14 Jun 2022, In: Ceramics International. 48.2022, 19 Part A, p. 28174-28180 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Melting Rate Determination of Mold Powders: Continuous Casting Process Versus Laboratory Conditions

    Kölbl, N., 17 May 2022, In: Frontiers in Materials. 9.2022, May, 8 p., 881168.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Fracture energy determination of carbon containing refractories with consideration of the creep behaviour

    Gruber, D., 6 May 2022.

    Research output: Contribution to conference › Presentation › Research

  72. Published

    Method for determination of mass transfer coefficients for dissolution of dense ceramics in liquid slags

    Guarco, J., Harmuth, H. & Vollmann, S., 1 May 2022, In: International journal of heat and mass transfer. 186.2022, 1 May, 11 p., 122494.

    Research output: Contribution to journal › Article › Research › peer-review

  73. E-pub ahead of print

    Thermomechanical finite element modeling of steel ladle containing alumina spinel refractory lining

    Samadi, S., Jin, S., Gruber, D. & Harmuth, H., 1 Apr 2022, (E-pub ahead of print) In: Finite elements in analysis and design. 206.2022, 1 September, 10 p., 103762.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Method for determination of effective binary diffusivities in dissolution of dense ceramic materials

    Guarco, J., Burhanuddin, B., Vollmann, S. & Harmuth, H., 15 Mar 2022, In: Ceramics International.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Application of an improved testing device for the study of alumina dissolution in silicate slag

    Burhanuddin, B., Guarco, J., Harmuth, H. & Vollmann, S., 2 Mar 2022, In: Journal of the European Ceramic Society. 42.2022, 8, p. 3652-3659 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. E-pub ahead of print

    Numerical study of creep effect on purging plug performance under cyclic service

    Tan, F. G., Jin, S. L., He, Z., Liang, X., Li, Y. W. & Li, J., 25 Feb 2022, (E-pub ahead of print) In: Journal of iron and steel research international. 2022, 25 February, 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Investigation of three-stage compressive creep of a spinel forming refractory castable containing 8% MgO

    Akbari, B., Gruber, D., Jin, S. & Harmuth, H., 1 Feb 2022, In: Ceramics International : CI. 48.2022, 3, p. 3287-3292 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. E-pub ahead of print

    Automatic Detection of Slag Eye Area Based on a Hue-Saturation-Value Image Segmentation Algorithm

    Wang, G., Tan, F., Jin, S., He, Z., Li, Y. & Li, J., 7 Jan 2022, (E-pub ahead of print) In: JOM. 74.2022, 8, p. 2921-2929 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Neuromelt model for estimating mold flux melting behaviour

    Vargas Hernandez, M., Mapelli, C., Cho, J., Kölbl, N., Marschall, I., Alloni, M. & Carli, R., Jan 2022, In: Metallurgia Italiana. 2022, 1, p. 23-31 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Significance of an inclined plane test for mould slag assessment

    Marschall, I., Harmuth, H. & Kircher, V., Jan 2022, In: Metallurgia Italiana. 2022, 1, p. 14-22 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Application of Artificial Neural Network to Predict the Thermal and Thermomechanical Behavior of Refractory Linings

    Hou, A., Jin, S., Gruber, D. & Harmuth, H., 2022, 2022 International Joint Conference on Neural Networks, IJCNN 2022 - Proceedings. Institute of Electrical and Electronics Engineers, (Proceedings of the International Joint Conference on Neural Networks; vol. 2022-July).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    DETERMINATION OF SECONDARY CREEP STAGE PARAMETERS OF SHAPED ALUMINA SPINEL REFRACTORY WITH AID OF GENETIC ALGORITHM

    Samadi, S., Jin, S., Gruber, D. & Harmuth, H., 2022.

    Research output: Contribution to conference › Paper › peer-review

  83. Published

    Digital Image Analysis of oxide particle dissolution in slags observed by HT-LSCM

    Lenzhofer, F., 2022

    Research output: Thesis › Master's Thesis

  84. Published

    Experimental studies of alumina and magnesia dissolution in silicate and aluminate melts

    Burhanuddin, B., 2022, 103 p.

    Research output: Thesis › Doctoral Thesis

  85. Published

    Finite Elemente Simulationen als Beitrag zur Optimierung einer Pfannenzustellung

    Kasper, R., 2022

    Research output: Thesis › Master's Thesis

  86. Published

    Investigation of the performance of a fluorine free mold powder at a pilot plant

    Riedler, S., Gruber, N., Marschall, I., Klösch, G. & Ilie, S., 2022.

    Research output: Contribution to conference › Abstract

  87. Published

    Prüfung der Eignung von Gießpfannenschlacken für den Einsatz als Substitut für Hüttensand in Zementen

    Bjelic, M., 2022

    Research output: Thesis › Master's Thesis

  88. Published

    Simulation of refractory wear by melts and calculation of wear parameters

    Guarco, J., 2022

    Research output: Thesis › Doctoral Thesis

  89. Published

    Thermomechanische Simulation eines zylinderförmigen Laborofens mittels Einheitszellen-Ansatz

    Haller, J., 2022

    Research output: Thesis › Master's Thesis

  90. Published

    Untersuchung des Einflusses von Silikat/Borat-Additiven auf die Eigenschaften und Phasenzusammensetzung von feuerfesten MgO-C Baustoffen

    Glanzer, M., 2022

    Research output: Thesis › Master's Thesis

  91. 2021
  92. Published

    Graphene-Reinforced Carbon-Bonded Coarse-Grained Refractories

    Storti, E., Fruhstorfer, J., Luchini, B., Jiříčková, A., Jankovský, O. & Aneziris, C., 27 Dec 2021, In: Materials. 15.2022, 1, 19 p., 186.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Significance of an inclined plane test for mould slag assessment

    Marschall, I., Harmuth, H. & Kircher, V., 20 Oct 2021, Proceedings of the 10th European Conference on Continuous Casting. Mailand: Associazione Italiana di Metallurgia, 9 p. CC_017

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Significance of an inclined plane test for mould slag assessment

    Marschall, I. & Harmuth, H., 20 Oct 2021.

    Research output: Contribution to conference › Presentation › Research

  95. Published

    Neuromelt model for estimating mold flux melting behaviour

    Vargas Hermandez, M., Mapelli, C., Cho, J., Kölbl, N., Marschall, I., Alloni, M. & Carli, R., 14 Oct 2021, Proceedings of the 10th European Conference on Continuous Casting. Associazione Italiana di Metallurgia, 039

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Application of liquid-liquid mass transfer for a steel ladle

    Doletschek, M., Vollmann, S. & Harmuth, H., 6 Oct 2021, STEELSIM 2021, 9th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking-STEELSIM2021. p. 8 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Break Temperature Measurement and an Automated Evaluation Method

    Kölbl, N., Oct 2021, Proceedings of the 10th European Continuous Casting Conference. Mailand: Associazione Italiana di Metallurgia, 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Combined damaged elasticity and creep modeling of ceramics with wedge splitting tests

    Samadi, S., Jin, S. & Harmuth, H., 15 Sept 2021, In: Ceramics International. 47.2021, 18, p. 25846-25853 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Phase formation in MgO-C refractories with different antioxidants

    Atzenhofer, C. & Harmuth, H., 27 Aug 2021, In: Journal of the European Ceramic Society. 41.2021, 14, p. 7330-7338 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Numerical Analysis of the Irreversible Behavior of Corundum Castable Purging Plugs During Service

    Tan, F., Jin, S., He, Z. & Li, Y., 17 Aug 2021, In: JOM. 73.2021, 10, p. 2911-2919 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    ParSD — Tool to design and analyze particle size distributions

    Fruhstorfer, J., 7 Jul 2021, In: SoftwareX. 15.2021, July, 5 p., 100753.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Asymmetric creep modeling of common refractory ceramics with high temperature wedge splitting test

    Jin, S. & Harmuth, H., Jul 2021, In: Engineering Fracture Mechanics. 252.2021, July, 12 p., 107819.

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Influence of the particle size distribution of coarse-grained refractories on the thermal shock performance

    Fruhstorfer, J., Jul 2021, In: Journal of the Australian Ceramic Society. 57.2021, 3, p. 899-909 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Investigation of calcium-aluminate-based mold flux of different compositions

    Marschall, I. & Harmuth, H., 10 Jun 2021, In: Steel research international. 93.2022, 3, 8 p., 2100187.

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    A comparison of two damage models for inverse identification of mode I fracture parameters: Case study of a refractory ceramic

    Samadi, S., Jin, S., Gruber, D. & Harmuth, H., 1 May 2021, In: International Journal of Mechanical Sciences. 197, 1 May, 9 p., 106345.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 Next
View graph of relations

Contact information

Peter-Tunner-Straße 5, 8700 Leoben
  • Main phone number: +43 3842 402 3201