Chair of Casting Research (330)

Organisational unit: Chair

301 - 400 out of 434Page size: 100

Research output

  1. 2011
  2. Published

    Correlation of porosity detected by computed tomography and fatigue strength of aluminium alloys

    Pabel, T., Geier, G., Habe, D., Rosc, J., Schumacher, P. & Petkov, T., 2011, TMS Conference-Supplemental Proceedings, General Paper Selections. p. 803-805

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Correlation of porosity detected by computed tomography and fatigue strength of aluminium alloys

    Pabel, T., Geier, G., Habe, D., Rosc, J., Schumacher, P. & Petkov, T., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Deutliche Einsparungen bei der Wärmebehandlung von untereutektischen Aluminium-Silizium Legierungen durch modifizierte Parameter

    Dambauer, G., Pabel, T., Kneißl, C. & Schumacher, P., 2011, In: Metall. p. 24-30

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    DSC and TA characteristics of the inoculated Al-Zn20 alloy

    Krajewski, W. K., Buras, J., Piwowarski, G., Haberl, K. & Tsivoulas, D., 2011, In: Archives of Foundry Engineering (AFE ; quarterly). Vol. 11, p. 65-68

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    EFFECT OF ALLOYING ELEMENTS (MAGNESIUM AND COPPER) ON HOT CRACKING SUSCEPTIBILITY OF AlSi7MgCu-ALLOYS

    Bozorgi, S., Haberl, K., Kneißl, C., Pabel, T. & Schumacher, P., 2011, Shape Casting: The 4th International Symposium. p. 113-120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Einfluss des Kupfer- und Magnesiumgehaltes auf die Warmrissempfindlichkeit von AlSi7MgCu-Gusslegierungen

    Pabel, T., Bozorgi, S., Kneißl, C., Haberl, K. & Schumacher, P., 2011, In: Gießerei-Rundschau. 58, p. 50-56

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Einfluss von Kupfer- und Magnesiumgehalt auf die Warmrissempfindlichkeit von AlSi7MgCu-Legierungen

    Pabel, T., Bozorgi, S., Kneißl, C., Haberl, K. & Schumacher, P., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  9. Published

    Einfluss von Kupfer- und Magnesiumgehalt auf die Warmrissneigung bei AlSi7MgCu-Legierungen

    Pabel, T., Bozorgi, S., Kneißl, C., Haberl, K. & Schumacher, P., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  10. Published

    Entwicklung von Fachwerkknoten im Feingussverfahren

    Einödhofer, G., 2011

    Research output: Thesis › Master's Thesis

  11. Published

    Evaluation of a mixed columnar-equiaxed solidification model with laboratory castings

    Wu, M., Nunner, G., Ludwig, A., Li, J. & Schumacher, P., 2011, IOP Conf. Series: Mater. Sci. Eng., vol. 27. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Improved properties of aluminium cast parts through the use of inorganic cores

    Pabel, T., Kneißl, C., Schumacher, P., Brotzki, J. & Müller, J., 2011, In: International foundry research = Giessereiforschung. p. 10-16

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Influence of SiC particles size and undercooling on AZ91 based composite heterogeneous nucleation model parameters

    Zak, P. L., Lelito, J., Suchy, J. S., Krajewski, W. K., Haberl, K. & Schumacher, P., 2011, In: World journal of engineering. 8, 3, p. 269-274

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Influence of the homogenization treatment on the precipitation and dissolution of intermetallic phases and effects on extrudability in direct chilled Al-Mg-Si alloys

    Wimmer, A. C., 2011, 112 p.

    Research output: Thesis › Diploma Thesis

  15. Published

    Kaltaushärtende AlZnMg(Cu)-Gusslegierungen

    Bozorgi, S., 2011, 255 p.

    Research output: Thesis › Doctoral Thesis

  16. Published

    Methoden und Ergebnisse zur Optimierung der Wärmebehandlung von aushärtbaren Aluminium-Gusslegierungen

    Pabel, T., Dambauer, G., Geier, G. F., Rockenschaub, H., Gschwandtner, R. & Schumacher, P., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. p. 269-274

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Modification of Al-Si and Al-Mg2Si eutectic

    Zarif, M. Z., 2011, 206 p.

    Research output: Thesis › Doctoral Thesis

  18. Published

    PRECIPITATION PROCESS IN Mg-Nd-Zn-Zr-Gd/Y ALLOY

    Li, J., Sha, G., Schumacher, P. & Ringer, S., 2011, Magnesium Technology 2011. p. 255-259

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Simulation von Verzug und Eigenspannung im Druckguss

    Hofer, P., Kaschnitz, E. & Schumacher, P., 2011, In: Giesserei. 98, p. 16-21

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Solidification and age hardening behaviour of Mg-Zn-Gd Alloys

    Li, J. & Schumacher, P., 2011, IOP Conf. Series: Materials Science and Engineering. p. 012021-012027

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Study of Heterogeneous Nucleation of Eutectic Si in High-Purity Al-Si Alloys with Sr Addition

    Zarif, M. Z., McKay, B. & Schumacher, P., 2011, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 42A, p. 1684-1691

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    The Effect of Ti on High-Zinc Al Cast Alloys Structure and Properties

    Krajewski, W. K. & Haberl, K., 2011, In: Acta metallurgica Slovaca. Vol. 17, p. 123-128

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Untersuchung zur Kühlwirkung in Druckgussformen

    Gössl, W., 2011

    Research output: Thesis › Master's Thesis

  24. Published

    Wärmebehandlung von untereutektischen Aluminium-Silicium-Legierungen

    Dambauer, G., Pabel, T., Schumacher, P. & Kneißl, C., 2011, In: Giesserei. p. 26-33

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Warmrisse in Aluminium-Gusslegierungen

    Pabel, T., Staggl, S., Faerber, K., Bozorgi, S. & Schumacher, P., 2011, Tagungsband. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Warmrissempfindlichkeit von Aluminium-Gusslegierungen

    Staggl, S., Bozorgi, S., Haberl, K., Pabel, T., Kneißl, C. & Schumacher, P., 2011, Internations Student´s Day of Metallurgy 2011. p. 178-186

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Warmrissneigung bei Aluminiumgusslegierungen in Abhängigkeit der Legierungszusammensetzung

    Pabel, T., Bozorgi, S., Kneißl, C., Haberl, K. & Schumacher, P., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. p. 261-268

    Research output: Contribution to journal › Article › Research › peer-review

  28. 2010
  29. Published

    Charakterisierung der Schmelzequalität einer AlSi7Mg0,5(Cu,Fe)-Legierung (Typ LM25)

    Haberl, K., Schumacher, P., Geier, G. F. & Stauder, B., 2010, In: Gießerei-Rundschau. 58, 7/8, p. 131-136

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Computertomographie

    Wenzl, B., Schumacher, P. & Geier, G., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    Correlation of Porosity Detected by Computed Tomography and Fatigue Strength of aluminium Alloys

    Pabel, T., Geier, G., Habe, D., Rosc, J., Petkov, T. & Schumacher, P., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Correlation of Porosity Detected by Computed Tomography and Fatigue Strength of Aluminium Alloys

    Pabel, T., Geier, G., Habe, D., Rosc, J., Schumacher, P. & Petkov, T., 2010, Correlation of Porosity Detected by Computed Tomography and Fatigue Strength of Aluminium Alloys. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Development of environmentally friendly cast alloys and composites, high zinc Al-base cast alloys

    Krajewski, W., Buras, J., Haberl, K. & Schumacher, P., 2010, In: Archives of Foundry Engineering (AFE ; quarterly). Volume 10, p. 431-434

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Development of environmentally friendly cast alloys and composites, high zinc Al-base cast alloys

    Haberl, K., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  35. Published

    Development of environmentally friendly cast alloys. High-zinc Al alloys

    Krajewski, W. K., Buras, J., Zurakowski, M., Greer, A. L., Mancheva, M. N., Haberl, K. & Schumacher, P., 2010, In: Archives of Materials Science and Engineering. Volume 45, p. 120-124

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Einfluss von Kupfer- und Magnesiumgehalt auf die Warmrissneigung bei AlSi7MgCu-Legierungen

    Pabel, T., Bozorgi, S., Kneißl, C., Haberl, K. & Schumacher, P., 2010, In: Giesserei-Praxis. p. 388-394

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Experimentelle Untersuchung der Mitführung der Schmelze an der Kokilleninnenwand bei einem horizontalen Schleudergießprozess

    Lackner, R., 2010

    Research output: Thesis › Master's Thesis

  38. Published

    Formenkonzept und Ergebnisse gießtechnologischer Versuche zur Entwicklung neuer Aluminiumlegierungen

    Kneißl, C., Pabel, T., Dambauer, G. & Schumacher, P., 2010, In: Druckguss-Praxis. p. 85-90

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Gefügeuntersuchungen von metallischen Proben mittels Computertomographie

    Rosc, J., Geier, G., Pabel, T., Habe, D. & Schumacher, P., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  40. Published

    Hardening and microstructure reactions in high-temperature Equal-Channel Angular Pressed Mg-Nd-Gd-Zn-Zr alloy

    Li, J., Sha, G., Xu, W., Xia, K., Jie, W. & Simon, R., 2010, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, p. 5092-5099

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Hochfeste Al-Mg2Si-Gusslegierungen

    Dambauer, G., 2010, 257 p.

    Research output: Thesis › Doctoral Thesis

  42. Published

    Impurities in Al-5Ti-1B (WT.%) grain refiner rod

    McKay, B., Nunner, G., Geier, G. & Schumacher, P., 2010, Light Metals 2010. p. 613-618

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Methode für die Bewertung von Porositätsanalysen von CT Daten

    Rosc, J., Geier, G. F., Habe, D., Pabel, T. & Schumacher, P., 2010, Proceedings - Industrielle Computertomographie - Fachtagung. p. 85-92

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Methode für die Bewertung von Porositätsanalysen von CT-Daten

    Rosc, J., Habe, D., Pabel, T., Geier, G. F. & Schumacher, P., 2010, In: Gießerei-Rundschau. 57, 11/12, p. 244-246

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Microstructural features of the grain-refined sand cast AlZn20 alloy

    Haberl, K., Krajewski, W. K. & Schumacher, P., 2010, In: Archives of Metallurgy and Materials. 55, 3, p. 837-841 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Modelling the effect of SiC mass fraction on crystallization of magnesium metal matrix composite, AZ91/SiC

    Lelito, J., Zak, P., Suchy, J., Krajewski, W., Krawiec, H., Greer, L., Shirzadi, A., Schumacher, P., Haberl, K. & Darlak, P., 2010, In: Inzynieria Materialowa. 3, p. 703-707

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Modelling the effect of SiC particle size on crystallization of magnesium metal matrix composite, AZ91/SiC

    Zak, P., Lelito, J., Suchy, J., Krajewski, W., Krawiec, H., Haberl, K., Schumacher, P., Greer, L., Shirzadi, A. & Gracz, B., 2010, In: Inzynieria Materialowa. p. 699-702

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Modifizierung der eutektischen Mg2Si-Phase von AlMgSi-Gusslegierungen

    Pabel, T., 2010, 230 p.

    Research output: Thesis › Doctoral Thesis

  49. Published

    Möglichkeiten einer modifizierten Wärmebehandlung für untereutektische Aluminium-Silizium Legierungen

    Schumacher, P., Pabel, T. & Dambauer, G., 2010, In: Der Wärmebehandlungsmarkt. 17, 3, p. 5-10

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    PROPERTIES VS. FINENESS OF STRUCTURE OF SAND CAST AI-Zn20 ALLOY

    Krajewski, W., Buras, J. & Haberl, K., 2010, In: TECHNOLOG. April, p. 123-126

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Schmelzequalität

    Haberl, K., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  52. Published

    Schmelzequalität von Al-Legierungen - Charakterisierung als Basis für Verbesserungen

    Haberl, K., Schumacher, P. & Stauder, B., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 493-498

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Simulation von Verzug und Eigenspannung im Druckguss - ein Vergleich zwischen Simulation und Experiment

    Hofer, P., Kaschnitz, E. & Schumacher, P., 2010, In: Gießerei-Rundschau. p. 182-186

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Study of heterogeneous nucleation in high purity Al-Si alloys with Sr addition

    Schumacher, P., Zarif, M. Z. & McKay, B., 2010, Supplemental Proceedings: Volume 2: Materials Characterization, Computation, Modeling and Energy. p. 381-388

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Study of the effect of Strontium (Sr) on the nucleation of eutectic Silicon (Si) in high purity hypoeutectic Al-5Si alloys

    Li, J., Zarif, M. Z. & Schumacher, P., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 506-511

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Study on Mechanical Properties and Microstructures of Mg-6Zn-2Gd-0.6Zr New Sand-Casting Magnesium Alloy

    Yang, G., Li, J., Jie, W. & Yu, Z., 2010, Materials Science Forum.. p. 651-654

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    TEM and APT characterization of solute clustering and precipitation process in a novel Mg-Nd-Gd-Zn-Zr alloy

    Li, J., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  58. Published

    TEM investigation of a novel Fe containing phase in high purity Al-Si-Fe alloys

    Zarif, M. Z., McKay, B., Li, J. & Schumacher, P., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 499-505

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Untersuchung der Legierung THX 540 (AlMg5Si2Mn) in Abhängigkeit von verwendeten Thixoparametern

    Bozorgi, S., Schumacher, P. & Eder, C., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 512-517

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Untersuchung der Modifikation von Graphit in Gusseisen mit Vermiculargraphit

    Geier, G. F., 2010

    Research output: Thesis › Doctoral Thesis

  61. Published

    Vergleich der Graphitmodifikation

    Geier, G., Bauer, W. & Schumacher, P., 2010, In: Giesserei-Praxis. p. 10-15

    Research output: Contribution to journal › Article › Research › peer-review

  62. 2009
  63. Published

    Higher strength magnesium alloy and processing

    Yang, G. (Inventor), Li, J. (Inventor), Jie, W. (Inventor), Yu, Z. (Inventor) & Zhang, R. (Inventor), 10 Jul 2009, Patent No. 200910023290.0

    Research output: Patent

  64. Published

    Casting magnesium alloy and processing

    Yang, G. (Inventor), Li, J. (Inventor), Jie, W. (Inventor), Yu, Z. (Inventor) & Cao, L. (Inventor), 9 Mar 2009, Patent No. 200910021445.7

    Research output: Patent

  65. Published

    2nd International Conference on Advances in Solidification Processes ICASP-2, 17-20 June 2008, Seggau Castle, Graz, Austria Preface

    Schumacher, P., McKay, B., Eck, S. & Ludwig, A., 2009, In: International journal of cast metals research. 22, p. 1-1

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Assessing Casting Quality using Computed Tomography with advanced Visualization Techniques

    Geier, G., Rosc, J., Hadwiger, M., Fritz, L., Habe, D., Pabel, T. & Schumacher, P., 2009, Shape Casting: The 3rd International Symposium. Campbell, J., Crepean, P. N. & Tiryakioglu, M. (eds.). p. 131-139

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Atom Probe Tomography Characterization of Early-stage Precipitates in an Mg-Gd-Nd-Zn Alloy

    Sha, G., Li, J., Jie, W. & Ringer, S., 2009, Magnesium Alloys and their Application. p. 40-45

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Characterization of the melt quality and impurity content of an LM25 alloy

    Haberl, K., Schumacher, P., Geier, G. & Stauder, B., 2009, Shape casting: Third International Symposium, TMS 2009. p. 181-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Characterization of the Melt Quality and Impurity Content of an Lm25 Alloy

    Haberl, K., Schumacher, P., Geier, G. F. & Stauder, B., 2009, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 40B, p. 812-821

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Computed Tomography - A new tool in structural examinations of castings

    Krajewski, W. K., Lelito, J., Suchy, J. S. & Schumacher, P., 2009, In: Archives of metallurgy and materials. 54, 2, p. 335-338 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Einsparpotentiale durch eine modifizierte Wärmebehandlung für untereutektische Aluminium-Silizium Legierungen

    Dambauer, G., Pabel, T. & Schumacher, P., 2009, In: Giesserei-Praxis. p. 294-300

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Entwicklung eines Kokillensets zur Bestimmung technologischer Eigenschaften von Al-Legierungen im Niederdruckkokillenguss

    Kneißl, C., Pabel, T., Dambauer, G. & Schumacher, P., 2009, In: Giesserei-Praxis. p. 320-324

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Formenkonzept und Ergebnisse gießtechnologischer Versuche zur Legierungsentwicklung im Niederdruckkokillenguss

    Kneißl, C., Pabel, T., Dambauer, G. & Schumacher, P., 2009, In: Gießerei-Rundschau. 56, p. 120-125

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Gusseisen mit Vermiculargraphit - Modifikationsverhalten von Mg, Ce, und La bei unterschiedlichen Impfzuständen

    Geier, G. F., Bauer, W. & Schumacher, P., 2009, In: Gießerei-Rundschau. p. 201-205

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Impurities in Al-5Ti-1B grain refiner rod

    McKay, B. J., Nunner, G., Geier, G. F. & Schumacher, P., 2009, In: International journal of cast metals research. 22, 1-4, p. 212-215 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Niederdruckkokillenguss - Entwicklung eines Kokillensets zur Bestimmung technologischer Eigenschaften von Al-Legierungen im Niederdruckkokillenguss

    Pabel, T., Kneißl, C., Dambauer, G. & Schumacher, P., 2009, In: Giesserei-Praxis. p. 320-324

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Schmelzequalität einer Al-Legierung

    Haberl, K., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  78. Published

    Untersuchung der Wechselwirkung zwischen nichtmetallischen Einschlüssen und dynamischer Beanspruchung in Vergütungsstählen

    Rauch, J. A. F., 2009

    Research output: Thesis › Master's Thesis

  79. Published

    Wärmebehandlungsparameter - Einsparpotentiale durch eine modifizierte Wärmebehandlung für untereutektische Aluminium-Silizium Legierungen

    Dambauer, G., Pabel, T. & Schumacher, P., 2009, In: Giesserei-Praxis. p. 294-300

    Research output: Contribution to journal › Article › Research › peer-review

  80. 2008
  81. Published

    Bestimmung der Aufnahmegrenzen bei Computertomographieuntersuchungen

    Wenzl, B., 2008

    Research output: Thesis › Master's Thesis

  82. Published

    Characterization of Nano-precipitates in Mg-2.8Nd-0.6Gd-0.2Zn-0.4Zr (wt %) Alloy

    Li, J., Sha, G., Wang, T., Jie, W. & Ringer, S., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  83. Published

    Characterization of Nano-precipitates in Mg-6Zn-2Cu-0.4Mn (wt %) Alloy

    Li, J., Sha, G., Jie, W. & Ringer, S., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  84. Published

    Die Eignung des Unterdruckdichtetests zur Bestimmung der Schmelzereinheit von Al-Legierungen

    Haberl, K., Schumacher, P., Geier, G. F. & Stauder, B., 2008, In: Giesserei. 95, 10, p. 48-54

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Die Eignung des Unterdruckdichtetests zur Bestimmung der Schmelzereinheit von Aluminiumlegierungen

    Haberl, K., Schumacher, P. & Geier, G. F., 2008, In: Gießerei-Rundschau. 55, 5/6, p. 100-104

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Effect of gadolinium on the aging hardening behaviour, solidification microstructure and mechanical properties of Mg-Nd-Zn-Zr cast magnesium alloys

    Li, J., Jie, W. & Yang, G., 2008, In: Transactions of Nonferrous Metals Society of China. 18, p. 27-32

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Microstructural evolution of Mg-6Zn-1.5Gd-0.4Zr alloy by semi-solid isothermal heat treatment

    Cao, L., Hao, Q. T., Yang, G. Y. & LI, J., 2008, In: Zhuzao = Foundry. 3

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Semi-solid Processing of Al-Si7-Mg Alloys

    Kamran, M., 2008

    Research output: Thesis › Doctoral Thesis

  89. Published

    Untersuchung der Legierung THX 540 (AlMg5Si2Mn) in Abhängigkeit von verwendeten Thixoparametern

    Bozorgi, S., 2008

    Research output: Thesis › Master's Thesis

  90. Published

    Untersuchung zur Wirkung von Kokillenkühlsystemen im Dauerformguss von Aluminium-Zylinderköpfen

    Krammerbauer, J., 2008, 108 p.

    Research output: Thesis › Master's Thesis

  91. 2007
  92. Published

    Simulation of degassing and purification process of molten aluminum alloys by rotary impeller

    Li, J., Hao, Q. & Yang, G., Feb 2007, In: Tezhong-zhuzao-ji-youse-hejin = Special casting and nonferrous alloys. 27, 2, p. 100-103 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Chemische Beständigkeit von unterschiedlichen Warmarbeitsstählen in Aluminiumschmelzen

    Rechberger, C., 2007

    Research output: Thesis › Diploma Thesis

  94. Published

    Comparison of results for numerical simulations of castings with x-ray computed tomography reconstructions

    Geier, G. F., Kaschnitz, E., Pabel, T., schindelbacher, G. & Schumacher, P., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  95. Published

    Comparison of results of numerical simulations of castings with x-ray computed tomography reconstructions

    Geier, G., Kaschnitz, E., Pabel, T., Schindelbacher, G. & Schumacher, P., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  96. Published

    Preliminary investigation on the Grain Refinement Behavior of ZrB2 Particles in Mg-Al Alloys

    Klösch, G., McKay, B. & Schumacher, P., 2007, Magnesium Technology.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  97. Published

    Schmelzen von Magnesium - Optimierung der Strömungsverhältnisse in einem Magnesiumofen

    Rockenschaub, H., Pabel, T., Sigmund, A., Wohlmuth, P. & Schumacher, P., 2007

    Research output: Non-textual form › Web publication/site › Research

  98. Published

    Schmelzequalität einer Al-Gusslegierung am Beispiel AlSi7MgCu0,5 und LM25

    Faerber, K., 2007

    Research output: Thesis › Master's Thesis

  99. Published

    Simulation and research of degassing and purification process of molten aluminium alloys by rotary impeller: Special Casting and Nonferrous alloys

    Li, J., Yang, G. & Qitang, H., 2007

    Research output: Non-textual form › Web publication/site › Transfer

  100. Published

    Spannungs/Dehnungs-Verhalten und Schwingfestigkeit von Gusseisen mit Lamellengraphit

    Willidal, T., 2007, 265 p.

    Research output: Thesis › Doctoral Thesis

  101. Published

    Study on the Process of Magnesium Alloys Investment Casting

    Yang, G., Jie, W., Qitang, H. & Li, J., 2007, Materials Science Forum.. p. 1019-1021

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. 2006
  103. Published

    57-Fe Mössbauer spectroscopy on cementite Fe3C of steel and nanotube origin - a comparison

    Lichtenberger, A., Geier, G. F., Weber, S., Schifferl, H., Schumacher, P., Kolb, G., Lottermoser, W. & Amthauer, G., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  104. Published

    Aspects of modern casting engineering

    Schumacher, P., Pabel, T., Rockenschaub, H., Kaschnitz, E. & Geier, G. F., 2006, International Foundry Conference Portoroz 2006. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  105. Published

    Comparison of results for numerical simulations of castings with x-ray computed tomography reconstructions

    Geier, G. F., Kaschnitz, E., Pabel, T., Schindelbacher, G. & Schumacher, P., 2006, Comparison of results for numerical simulations of castings with x-ray computed tomography reconstructions. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  106. Published

    Comparison of results for numerical simulations of castings with x-ray computed tomography reconstructions

    Geier, G. F., Kaschnitz, E., Pabel, T., Schindelbacher, G. & Schumacher, P., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1 2 3 4 5 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 3301