Chair of Casting Research (330)

Organisational unit: Chair

201 - 300 out of 434Page size: 100

Research output

  1. 2015
  2. Published

    Modification of eutectic Si in Al-Si alloys with Eu addition

    Li, J. H., Wang, X. D., Ludwig, T. H., Tsunekawa, Y., Arnberg, L., Jiang, J. Z. & Schumacher, P., 1 Feb 2015, In: Acta materialia. 84, p. 153-163 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Correlative characterization of primary Al3(Sc,Zr) phase in an Al-Zn-Mg based alloy

    Li, J. H., Wiessner, M., Albu, M., Wurster, S., Sartory, B., Hofer, F. & Schumacher, P., 1 Jan 2015, In: Materials characterization. 102, p. 62-70 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Experimental investigations on energy absorption capacity of selected AlSiMg casting alloys

    Domitner, J., Bozorgi, S., Anders, K., Angermeier, C. & Schumacher, P., 1 Jan 2015, In: Materials Science and Technology (United Kingdom). 31, 1, p. 85-93 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Aspects of grain refinement in copper alloys

    Cziegler, A., 2015

    Research output: Thesis › Master's Thesis

  6. Published

    Control of precipitation during heat treatments based on DSC experiments

    Schumacher, P., Pogatscher, S., Starink, M., Keßler, O., Schick, C., Mohles, V. & Milkereit, B., 2015, International Conference on Solid-Solid Phase Transformations in Inorganic Materials. Whistler, Canada, p. 699 706 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Machbarkeitsuntersuchung zur Herstellung von CFK – Aluminium Verbundgussstrukturen im Sandgussverfahren

    Kleinhans, R., 2015

    Research output: Thesis › Master's Thesis

  8. Published

    New developments of Al-Zn cast alloys

    Krajewski, W. K., Buras, J., Krajewski, P. K., Greer, A. L., Faerber, K. & Schumacher, P., 2015.

    Research output: Contribution to conference › Abstract › peer-review

  9. Published

    Nucleation and Growth of Eutectic Si in Al-Si Alloys with Na Addition

    Li, J., BARRIRERO, J., ENGSTLER, M., ABOULFADL, H., MüCKLICH, F. & Schumacher, P., 2015, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science .

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Simultaneously refining eutectic grain and modifying eutectic Si in Al-10Si-0.3Mg alloys by Sr and CrB2 additions

    Li, J. H., Yang, Y. G., Soemmez, S., Taylor, J. A., Oberdorfer, B., Habe, D., Heugenhauser, S. & Schumacher, P., 2015, In: International journal of cast metals research. 29, 3, p. 158-173

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Solute adsorption and entrapment during eutectic Si growth in Al-Si-based alloys

    Li, J., Albu, M., Hofer, F. & schumacher, P., 2015, In: Acta materialia. 83, p. 187-202

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Thermodynamische Berechnung der Einflüsse von Spurenelementen auf der Bildung intermetallischer Phasen bei Al-Gusslegierungen

    Fasching, A., 2015

    Research output: Thesis › Master's Thesis

  13. 2014
  14. Published

    Preliminary Investigation on the Grain Refinement Behavior of ZrB2 Particles in Mg-Al Alloys

    Klösch, G., McKay, B. & Schumacher, P., 3 Mar 2014, Essential Readings in Magnesium Technology. Wiley-Blackwell, USA, Vol. 9781118858943. p. 255-261 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  15. Published

    Influence of dendritic morphology on the calculation of macrosegregation in steel ingot

    Li, J., Wu, M. H., Ludwig, A., Kharicha, A. & Schumacher, P., 1 Jan 2014, Solidification and Gravity VI. Trans Tech Publications, p. 121-126 6 p. (Materials Science Forum; vol. 790-791).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    A numerical study of the influence of pouring technique on the as-cast structure of Al-Cu ingots

    Ahmadein, M., Wu, M., Schumacher, P. & Ludwig, A., 2014, Materials Science Forum. Vol. 790-791.2014. p. 67-72 (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  17. Published

    Atomic observation on the solute adsorption and entrainment during Si growth in Al-Si based alloys

    Li, J., Albu, M., Hofer, F. & Schumacher, P., 2014, Fortschritte in der Metallographie . Werkstoff-Informationsges., p. 379-384 (Sonderbände der praktischen Metallographie; vol. 46).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  18. Published

    Aus dem Österreichischen Gießerei-Institut des Vereins für praktische Gießereiforschung in Leoben

    Schumacher, P., 2014, In: Gießerei-Rundschau. 61, 9/10, p. 321-327

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Determination of Cleanliness different special steels Comparison of different Methods

    Schützenhöfer, W., Tazreiter, A., Plank, B. & Schumacher, P., 2014, iCT2014.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Distortion and Residual Stress in High-Pressure Die Castings: Simulation and Measurements

    Hofer, P., Kaschnitz, E. & Schumacher, P., 2014, In: JOM. p. 1638-1646

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Influence of dendritic morphology on the calculation of macrosegregation in steel ingot

    Li, J., Wu, M., Ludwig, A., Kharicha, A. & Schumacher, P., 2014, Materials Science Forum Vols. 790-791. p. 121-126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Intermetallic phase selection during homogenisation for AA6082 alloy

    Li, J., Wimmer, A. C., Dehm, G. & Schumacher, P., 2014, In: Philosophical magazine. p. 830-846

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Klassifizierung und Charakterisierung von verfahrensbedingten Gussfehlern in einem innovativen Kokillen-Giessverfahren

    Tucan, K.-P., 2014, 102 p.

    Research output: Thesis › Master's Thesis

  24. Published

    Kornfeinung in AlSi-Legierungen

    Doppelhofer, B., 2014

    Research output: Thesis › Master's Thesis

  25. Published

    Modification of eutectic Si in Al-Si based alloys

    Li, J., Albu, M., Ludwig, T. H., Matsubara, Y., Arnberg, L., Tsunekawa, Y. & Schumacher, P., 2014, Materials Science Forum. Vol. 794-796.2014. p. 130-136 7 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  26. Published

    Nanoscale voxel spectroscopy by simultaneous EELS and EDS tomography

    Haberfehlner, G., Orthacker, A., Albu, M., Li, J. & Kothleitner, G., 2014, In: Nanoscale. 6, p. 14563-14569

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Non-destructive determination of the primary silicon particle size in hypereutectic aluminium-silicon

    Petkov, T., Berbic, M., Pabel, T. & Schumacher, P., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    Nucleation Kinetics of Entrained Eutectic Si in Al-5Si Alloys

    Li, J., Zarif, M. Z., Albu, M., McKay, B., Hofer, F. & Schumacher, P., 2014, In: Acta materialia. 72, p. 80-98

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Numerische Simulation und praktische Versuche zum Verbundgießen von Aluminiumlegierungen

    Heugenhauser, S., Kaschnitz, E., Langbein, F. & Schumacher, P., 2014, In: Gießerei-Rundschau. p. 295-302

    Research output: Contribution to journal › Article › Research

  30. Published

    Optimierung der Wärmebehandlungsparameter für eine AlMgSi-Gusslegierung

    Petkov, T., Künstner, D., Pabel, T., Faerber, K., Kneißl, C. & Schumacher, P., 2014, In: Metall. 68, p. 148-154

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Refinement of eutectic Si in high purity Al-5Si alloys with combined Ca and P additions

    Ludwig, T., Li, J., Schaffer, P., Schumacher, P. & Arnberg, L., 2014, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 46, p. 362-376

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Revealing the precipitation in Al-Cu based alloys with Sc addition

    Li, J., Albu, M., Hofer, F. & Schumacher, P., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Schmelzekorrosion an Formwerkstoffen für Druckgusswerkzeuge

    Eichinger, P., 2014

    Research output: Thesis › Master's Thesis

  34. Published

    Solidification microstructure control of Al alloys

    LI, J., 2014

    Research output: Thesis › Habilitation thesis › peer-review

  35. Published

    Solution Strengthened Ferritic Ductile Cast Iron Properties, Production and Application

    Stets, W., Löblich, H., Gassner, G. & Schumacher, P., 2014, In: International journal of metalcasting. 2, p. 35-40

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Thermal physical and mechanical properties of raw sands and sand cores for aluminum casting

    Wang, X., 2014

    Research output: Thesis › Master's Thesis

  37. Published

    Ultraschallbehandlung von Aluminiumschmelzen

    Cziegler, A., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Untersuchung der Wirkung der Hauptlegierungselemente bei konventionellen Druckgusslegierungen

    Tucan, K.-P., Hofer, P., Schindelbacher, G., Schumacher, P. & Gschwandtner, R., 2014, In: Gießerei-Rundschau. p. 303-310

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Untersuchung des Energieabsorptionsvermögens ausgewählter Al-Si-Mg-Gusslegierungen zur Herstellung crashbeanspruchter Automobilbauteile

    Domitner, J., 2014

    Research output: Thesis › Master's Thesis

  40. 2013
  41. Published

    Prediction of the as-cast structure of Al-4.0 Wt Pct Cu ingots

    Ahmadein, M., Wu, M., Li, J. H., Schumacher, P. & Ludwig, A., 1 Jun 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, 6, p. 2895-2903 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Heterogeneous Nucleation of αAl-Ti in Al-Ni-Si Alloys

    Mckay, B. J., Cizek, P., Schumacher, P. & O'Reilly, K. A. Q., 8 Apr 2013, Essential Readings in Light Metals. John Wiley & Sons, Großbritannien, Vol. 3. p. 375-380 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  43. Published

    Studies of the Action of Grain-Refining Particles in Aluminum Alloys

    Schumacher, P. & Greer, A. L., 8 Apr 2013, Essential Readings in Light Metals. John Wiley & Sons, Großbritannien, Vol. 3. p. 366-374 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  44. Published

    Zr-Poisoning of Grain Refiner Particles Studied in Al-Ni-Zr Amorphous Alloys

    Schumacher, P., Cizek, P. & Bunn, A. M., 8 Apr 2013, Essential Readings in Light Metals. John Wiley & Sons, Großbritannien, Vol. 3. p. 381-386 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  45. Published

    Alloy, useful for high pressure die casting of automobile and aircraft constructions, comprises a specified range of silicon, manganese, magnesium, scandium and zirconium, impurities and aluminum

    Schumacher, P. (Inventor) & Faerber, K. (Inventor), 21 Mar 2013, IPC No. B22D17/00, C22C21/06, C22C21/08, Patent No. DE102012216845 (A1), Priority date 20 Sept 2011, Priority No. AT2011000135120110920

    Research output: Patent

  46. Published

    A new multi-zone model for porosity distribution in Al-Si alloy castings: Reportnr. 7923; Auftraggeber: Acta Materialia, Richard Wagner PhD; Ms No: A-12-2046R1, Review

    Schumacher, P. (Reviewer), 2013, Elsevier.

    Research output: Other contribution › Transfer › peer-review

  47. Published

    An Investigation on the effect of structural and microstructural attributes on magnetostriction of Tb-Dy-Fe and Fe-Ga alloys: Reportnr.: 5726

    Schumacher, P. (Reviewer), 2013, Indien

    Research output: Other contribution › Transfer › peer-review

  48. Published

    As-cast high silicon ductile irons with optimised mechanical properties and remarkable fatique properties

    Schumacher, P. (Reviewer), 2013, Maney Publishing.

    Research output: Other contribution › Transfer › peer-review

  49. Published

    Atomic observation of SR in high purity melt spun Al-5wt%Si based Alloys

    Li, J. & Schumacher, P., 2013, Atomic Observation of SR in high purity melt spun Al-5wt%Si based Alloys. p. 509-512

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Determination of heat treatment parameters for an AlMgSi casting alloy

    Petkov, T., Künstner, D., Pabel, T., Kneißl, C., Faerber, K. & Schumacher, P., 2013, In: Casting plant and technology international. p. 10-17

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Effects of Yb Additions on Refinement of Eutectic Si in Al-5Si Alloys

    Li, J. & Schumacher, P., 2013, Effects of Yb Additions on Refinement of Eutectic Si in Al-5Si Alloys. p. 1017-1022

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Effects of Yb Additions on Refinement of Eutectic Si in Al-5Si Alloys

    Li, J. & Schumacher, P., 2013, Light Metals 2013. p. 1017-1022

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  53. Published

    Energieeffiziente Wärmebehandlung der Gusslegierungen AlSi7Mg0,3 und AlSi9Cu3(Fe)

    Staggl, S., 2013

    Research output: Thesis › Master's Thesis

  54. Published

    Erweiterung des Eigenschaftspotentials der Legierung Al Mg5Si2Mn durch eine gezielte Wärmebehandlung

    Petkov, T., Künstner, D., Pabel, T., Faerber, K., Kneißl, C. & Schumacher, P., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 104-112

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Evidence for an extensive, undercooling-mediated transition in growth orientation and novel dendritic seaweed microstructures in Cu-8,9wt% Ni

    Schumacher, P. (Reviewer), 2013, UK : Elsevier.

    Research output: Other contribution › Transfer › peer-review

  56. Published

    Evolution of Texture and its Correlation with Microstructure and Mechanical Property Anisotropy in AA7010 Aluminium Alloy: Reportnr.: 5703; Auftraggebern: Indian Institute of Science Bangalore 560 012, Indien, Mr. Chandan Mondal; Review

    Schumacher, P. (Reviewer), 2013

    Research output: Other contribution › Transfer › peer-review

  57. Published

    Hot cracking susceptibility of AlSi7MgCu alloys

    Pabel, T., Kneißl, C., Schumacher, P., Faerber, K. & Bozorgi, S., 2013, In: Foundry review. 5, 1, p. 4-5

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Hot cracking susceptibility of AlSi7MgCu alloys and effects of alloying elements magnesium and copper

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., 2013, In: China Foundry. 4, p. 248-253

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Modification of the eutectic Mg2Si-Phase of AlMgSi-Cast Alloys

    Pabel, T., Petkov, T., Kneißl, C. & Schumacher, P., 2013, Modification of the eutectic Mg2Si-Phase of AlMgSi-Cast Alloys. p. 303-304

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Modification of the Eutectic Mg2Si-Phase of AlMgSi-Cast Alloys

    Pabel, T., Petkov, T., Kneißl, C. & Schumacher, P., 2013, Light Metals 2013. p. 303-304

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  61. Published

    Nichtmetallische Einschlüsse in Edelstählen: Korrelation von unterschiedlichen Prüfmethoden

    Tazreiter, A., Schützenhöfer, W., Beck, R. & Schumacher, P., 2013, In: Practical metallography = Praktische Metallographie. Sonderband, p. 221-226

    Research output: Contribution to journal › Article › Research

  62. Published

    Refinement of Eutectic Si Phase in Al-5Si Alloys with Yb Additions

    Li, J., SUETSUGU, S., TSUNEKAWA, Y. & Schumacher, P., 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, p. 669-681

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Solution Strengthened Ferritic Ductile Cast Iron According DIN EN 1563: 2012-Properties, Production and Application: Reportnr. 1733, Auftraggeber: 2013 Keith Millis Sympostium, AFS Transactions, Review

    Stets, W., Löblich, H., Schumacher, P. & Gassner, G., 2013, Proceedings of the 2013 Keith Millis Symposium on Ductile Cast Iron. American Foundry Society

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Tailoring Precipitates in Mg-6Zn-2Gd based Alloy subjected to high pressure torsion

    Li, J. & Schumacher, P., 2013, Tailoring Precipitates in Mg-6Zn-2Gd based alloy subjected to high pressure torsion. p. 351-356

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Tailoring Precipitates in Mg-6Zn-2Gd based Alloy Subjected to High Pressure Torsion

    Li, J. & Schumacher, P., 2013, Magnesium Technology 2013. p. 351-356

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  66. Published

    The grain refinement mechanism of cast aluminium by zirconium

    Schumacher, P. (Reviewer), 2013, Elsevier.

    Research output: Other contribution › Transfer › peer-review

  67. Published

    The microstructure of melt-spun Al-5Ti-1B-1Re master alloy and its refining efficiency on as-cast A356 alloys

    Schumacher, P., 2013, In: Journal of alloys and compounds. D, p. 1-1

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Untersuchung der Wirkung von lokalem Nachverdichten im Druckgießverfahren und Entwicklung einer geeigneten Versuchsform zur Bestimmung optimaler Nachverdichtungsparameter

    Künstner, D., 2013

    Research output: Thesis › Master's Thesis

  69. Published

    Vergleich und Bewertung verschiedener Reinheitsgradauswertungsmethoden anhand ausgewählter Edelstähle

    Tazreiter, A., 2013

    Research output: Thesis › Master's Thesis

  70. Published

    Vliv legujicich prvků na slévárenskych slitin AlSi7MgCu ke vzniku trhlin za tepla

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., 2013, In: Slévárenství. p. 263-270

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Werkstoffe in der Fertigung

    Petkov, T., Künstner, D., Pabel, T., Faerber, K., Kneißl, C. & Schumacher, P., 2013, In: Werkstoffe in der Fertigung. p. 39-42

    Research output: Contribution to journal › Article › Research › peer-review

  72. 2012
  73. Published

    Änderung der Warmrissneigung bei AlSi7MgCu legierungen in Abhängigkeit vom Kupfer- und Magnesiumgehalt

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., Sept 2012, In: Metall. 66, 9, p. 391-396 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Einfluss der Legierungselemente auf die Heißrissneigung bei AlSi7MgCu-Gusslegierungen

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., Sept 2012, In: Giesserei. 99, 9, p. 30-37

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Änderung der Warmrissneigung bei AlS7MgCu Legierungen in Abhängigkeit vom Kupfer- und Magnesiumgehalt

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., 2012, In: Metall. p. 336-341

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Az AlSi7MgCu ötvözetek melegrepedési hajlama és az ötvözöelemek (magnézium és réz) hatásai

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., 2012, In: Bányászati és kohászati lapok = Zurnal gornogo dela i metallurgija = Zeitschrift für Berg- und Hüttenwesen / Kohászat = Metallurgija = Hüttenwesen. 145, 5, p. 19-24

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Bildanalytische Methode zur Charakterisierung des Veredelungsgrades von Aluminium-Silizium Gusslegierungen

    Heugenhauser, S., Stauder, B., Djurdjevic, M. & Schumacher, P., 2012, Fortschritte in der Metallographie : Sonderbände der praktischen Metallographie. Frankfurt: DGM, Vol. 44. p. 231-237 6 p. (Sonderbände der praktischen Metallographie; vol. 44).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  78. Published

    Charakterisierung der Heissrissempfindlichkeit von Aluminium-Gusslegierungen

    Staggl, S., Pabel, T., Bozorgi, S., Faerber, K., Kneißl, C. & Schumacher, P., 2012, In: Giesserei-Praxis. p. 192-196

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Effect of alloying Elements on hot cracking suscetibility of AlSi7MgCu-alloys

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., 2012, In: International foundry research = Giessereiforschung. p. 29-34

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Effect of SiC reinforcement particles on the grain density in a magnesium-based metal-matrix composite: Modelling and experiment

    Lelito, J., Pawel L., Z., Shirzadi, A. A., Greer, A. L., Krajewski, W. K., Suchy, J. S., Faerber, K. & Schumacher, P., 2012, In: Acta materialia. 60, p. 2950-2958

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Effect of Y addition and cooling rate on refinement of eutectic Si in Al–5 wt-%Si alloys

    Li, J. & Schumacher, P., 2012, In: International journal of cast metals research. 25, p. 347-357

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Einfluss der Legierungselemente auf die Heißrissbildung bei AlSi7MgCu-Gusslegierungen

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., 2012, In: Giesserei. 99, p. 30-37

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Einfluss von Seltenen (Erd) Metallen auf eutektische und peritektische Erstarrung in Aluminium-Legierungen

    Faerber, K., 2012, 171 p.

    Research output: Thesis › Doctoral Thesis

  84. Published

    Ermittlung der Wärmebehandlungsparameter für eine AlMgSi-Gusslegierung

    Petkov, T., Künstner, D., Pabel, T., Faerber, K., Kneißl, C. & Schumacher, P., 2012, In: Giesserei. 99, p. 26-37

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Ermittlung prozesskritischer Grenzen für Kornfeinung und Veredelung von untereutektischen Al-Si-Cu Gusslegierungen

    Heugenhauser, S., 2012, 105 p.

    Research output: Thesis › Master's Thesis

  86. Published

    Hot cracking susceptibility of AlSi7MgCu-Alloys and the effects of alloying elements (Magnesium and Copper)

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., 2012, In: Revista de turnătorie : RT ; publicaţie a Asociaţiei Tehnice de Turnătorie din România . 9-10

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Improved properties of aluminium cast parts through the use of inorganic cores

    Pabel, T., Kneißl, C., Schumacher, P., Brotzki, J. & Müller, J., 2012, In: Foundry trade journal international. 186, 3696, p. 257-261

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Improvement of the resistance of titanium aluminides to environmental embrittlement

    Masset, P. J., Bleicher, F., Bortolotto, L., Geiger, G., Kolitsch, A., Langlade, C., Paul, J., Pelic, B., Pyczak, F., Rafaja, D., Schumacher, P., Schütze, M., Wolf, G. & Yankov, R. A., 2012, In: ECS transactions. 50, 44, p. 127-141 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Messung und Simulation des Verzugs von Druckgussbauteilen

    Hofer, P., 2012, 220 p.

    Research output: Thesis › Doctoral Thesis

  90. Published

    Modification of Al-Si alloys

    Li, J., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  91. Published

    Optimierung der Sphärogussbehandlung mittels einer Drahteinspultechnik

    Sönmez, S. S., 2012

    Research output: Thesis › Master's Thesis

  92. Published

    Optimierung der Wärmebehandlung einer AlMgSi-Gusslegierung

    Petkov, T., Künstner, D., Pabel, T., Faerber, K., Kneißl, C. & Schumacher, P., 2012, In: Gießerei-Rundschau. 58, p. 194-200

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Optimierung der Wärmebehandlung einer AlMgSi-Gusslegierung

    Petkov, T., Künstner, D., Pabel, T., Faerber, K., Kneißl, C. & Schumacher, P., 2012, In: Giesserei-Praxis. p. 268-274

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Phase Selection in 6082 Al-Mg-Si Alloys

    Wimmer, A. C., Li, J. & Schumacher, P., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. p. 301-305

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Precipitation microstructure and age-hardening response of an Mg-Gd-Nd-Zn-Zr alloy

    Li, J., Sha, G., Wang, T., Jie, W. & Ringer, S., 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 534, p. 1-6

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Precipitation microstructure and their strengthening effects of an Mg-2.8Nd-0.6Zn-0.4Zr alloy with a 0.2 wt. % Y addition

    Li, J., Sha, G., Jie, W. & Ringer, S., 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 538, p. 272-280

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Simulation of distortion and residual stress in high pressure die casting - modelling and experiments

    Hofer, P., Kaschnitz, E. & Schumacher, P., 2012, In: IOP Conference Series: Materials Science and Engineering. 33.2012, p. 1-8 8 p., 012055.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Susceptibilitatea fisurării la cald a aliajelor AlSi7MgCu şi influenţa elementelor de aliere (Magneziu şi Cupru)

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., 2012, In: Revista de turnătorie : RT ; publicaţie a Asociaţiei Tehnice de Turnătorie din România . 9-10, p. 2-11

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Untersuchungsmethoden zur Charakterisierung der Heißrissempfindlichkeit von Aluminium-Gusslegierungen

    Staggl, S., Bozorgi, S., Pabel, T., Faerber, K., Kneißl, C. & Schumacher, P., 2012, In: Gießerei-Rundschau. p. 137-143

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Werkstoff- und fertigungstechnische Grundlagen der Herstellung und Anwendung von hoch siliciumhaltigem Gusseisen mit Kugelgraphit

    Gassner, G., Bauer, W., Schumacher, P., Löblich, H. & Stets, W., 2012, In: Giesserei. p. 20-23

    Research output: Contribution to journal › Article › Research › peer-review

  101. 2011
  102. Published

    Änderung der Warmrissneigung bei AlSi7MgCu-Legierungen in Abhängigkeit vom Kupfer- und Magnesiumgehalt

    Pabel, T., Bozorgi, S., Kneißl, C., Haberl, K. & Schumacher, P., 2011, In: International aluminium journal. 3, p. 61-65

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Beitrag zu Formstoffen in Hochtemperaturanwendungen

    Steiner, J., 2011

    Research output: Thesis › Master's Thesis

  104. Published

    Bestimmung technologischer Eigenschaften von Al-Legierungen – Einsatz eines neu entwickelten Kokillensets im Niederdruckkokillengießverfahren

    Kneißl, C., Pabel, T., Dambauer, G. & Schumacher, P., 2011, In: Giesserei. p. 22-28

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Correlation of porosity detected by computed tomography and fatigue strength of aluminium alloys

    Pabel, T., Geier, G., Habe, D., Rosc, J., Petkov, T. & Schumacher, P., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1 2 3 4 5 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 3301