Chair of Automation and Measurement (530)

Organisational unit: Chair

501 - 615 out of 615Page size: 500

Research output

  1. 2007
  2. Published

    Rissprüfung an Sägeblättern

    Oswald-Tranta, B. & Sorger, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  3. Published

    Rissprüfung von Gussteilen

    Oswald-Tranta, B., Sorger, M., Reindl, I. & O'Leary, P., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  4. Published

    Study of the Horizontal Cutting Boom Motion with Electronic Control

    Rath, G., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  5. Published

    The influence of crack shapes and geometries on the result of the thermo-inductive crack detection

    Wally, G. & Oswald-Tranta, B., 2007, The influence of crack shapes and geometries on the result of the thermo-inductive crack detection. p. 6541111-6541118

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Thermo-inductive crack detection

    Oswald-Tranta, B., 2007, In: Journal of non-destructive testing & evaluation (Journal of non-destructive testing and evaluation). 22, p. 137-153

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Zusammenfassung der Messergebnisse vom 18.Oktober 2007

    Wally, G. & Oswald-Tranta, B., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  8. Published

    Zwischenbericht Projekt THIRDE

    Wally, G. & Oswald-Tranta, B., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. 2006
  10. Published

    Analysis System: Combined Thermographic and Geometric Inspection

    O'Leary, P. (Inventor), Oswald-Tranta, B. (Inventor) & Wally, G. (Inventor), 12 Dec 2006, Patent No. PCT/EP2006/011949

    Research output: Patent

  11. Published

    A capacitance ultrasonic transducer with micromachined backplate for fast flow measurements in hot pulsating gases

    Schröder, A., Kupnik, M., O'Leary, P., Benes, E. & Gröschl, M., 1 Aug 2006, In: IEEE sensors journal. 6, 4, p. 898-905 8 p., 1661569.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Adaptive pulse repetition frequency technique for an ultrasonic transit-time gas flowmeter for hot pulsating gases

    Kupnik, M., Schröder, A., O'Leary, P., Benes, E. & Gröschl, M., 1 Aug 2006, In: IEEE sensors journal. 6, 4, p. 906-915 10 p., 1661570.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    A Capacitance Ultrasonic Transducer with Micromaschined Backplate for Fast Flow-Measurements in Hot Pulsating Gases

    Schröder, A., Kupnik, M., O'Leary, P., Benes, E. & Gröschl, M., 2006, In: IEEE sensors journal. VOL. 6, p. 898-905

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Adaptive pulse repetition frequency for an ultrasonic transit-time gas flowmeter for hot pulsating gases

    Kupnik, M., Schröder, A., O'Leary, P., Benes, E. & Gröschl, M., 2006, In: IEEE sensors journal. VOL. 6, p. 906-915

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Auswahl von optischen Komponenten für die Verfolgung glühenden Materials

    Schalk, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Auswerteergebnisse: Durchmessermessanlage VATubulars TBK Testmessungen

    Schalk, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    Auswertung und Vergleich von Kreis- und Keil-Kalibrationsdaten

    Schalk, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Automatic Positioning of a Robot

    O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Böhler Schopfvermessung-Ergebnisse der Abnahmemessungen

    Schalk, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Chancen und Risken für die Sicherheit von Berg- und Tunnelbaumaschinen durch Automation

    Sifferlinger, N. A., 2006, 240 p.

    Research output: Thesis › Doctoral Thesis

  21. Published

    Direct Estimation of Homogeneous Vectors: An Ill-Solved Problem in Computer Vision

    Harker, M. & O'Leary, P., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  22. Published

    Direct Estimation of Homogeneous Vectors: An Ill-Solved Problem in Computer Vision

    Harker, M. & O'Leary, P., 2006, Indian Conference on Computer Vision, Graphics and Image Processing. Springer, p. 919-930

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Durchmessermessung an Kupferstäben

    Ofner, R. & Reindl, I., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Entgraten von Küppel und Schienen

    Ofner, R. & Probst, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Erkennung, Vermessung und Verfolgung von Grobblechtafeln auf Basis optischer Sensoren auf der Grobblechstraße der voestalpine Grobblech GmbH

    Tratnig, M., Reisinger, J., Ackerl, R., Hlobil, H., Degelsegger, R., O'Leary, P. & Harker, M., 2006, XXV. Verformungskundliches Kolloquium. p. 19-36

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    First Order Geometric Distance (The Myth of Sampsonus)

    Harker, M. & O'Leary, P., 2006, British Machine Vision Conference 2006. BMVA-Pr., p. 87-96

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Fitting Specific Conics to Scattered Data via Explicit Polynomials

    Harker, M. & O'Leary, P., 2006, International Conference on Signal and Image Processing. MacMillan, p. 489-494

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Instrumentation and Analysis-Methods for the Measurement of Profiles using Light Sectioning

    O'Leary, P., Schalk, P., Ofner, R. & Gfrerrer, A., 2006, IMTC/06 Proceeding of the 23rd IEEE Instrumentation and Measurement Technology Conference. Inst. of Electrical and Electronics Engineers, p. 1108-1113

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Labormessungen zur Erkennung von Schweißnahtfehlern an Vierkantrohren der voestalpine Krems mittels Lichtschnittverfahren

    Schalk, P., O'Leary, P. & Ofner, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    Magneto-thermische Rissprüfung an Gussteilen

    Oswald-Tranta, B. & Wally, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    Measuring the Straightness and Cross-Sections of Rolled Seamless-Pipes

    O'Leary, P., Schalk, P., Ofner, R. & Gfrerrer, A., 2006, XXV. Verformungskundliches Kolloquium. p. 37-50

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Messung der Oberflächengeometrie von Knüppelproben für Fa. Rumpler

    Reindl, I. & O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  33. Published

    Messungen zur Rissdetektion an Schopfstirnflächen mittels Lichtschnittverfahren

    Ofner, R. & Schalk, P., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  34. Published

    Metric Tracking of Steel Plates

    Harker, M. & O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    Montanwerke Brixlegg, Indentifizieren von Projekten

    Ofner, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  36. Published

    Monte Carlo-Simulation zur Sensorkalibierung mit rechtwinkeligen Targets

    Schalk, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  37. Published

    Optical Configurations, Methods and Algorithms for the Automatic Inspection on Metallic Surfaces

    Reindl, I. M., 2006, 191 p.

    Research output: Thesis › Doctoral Thesis

  38. Published

    Optical Detection of Surface Defects and Cracks

    O'Leary, P., 2006, Optical Detection of Surface Defects and Cracks. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Optical Inspection of Steel Bars for Automatic Grinding of Surface Defects

    Fauster, E., Koller, N., Ofner, R. & O'Leary, P., 2006, XXV.Verformungskundliches Kolloguium. p. 5-17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Optical Servoing for Industrial Surface Machining

    Koller, N., Ofner, R., O'Leary, P. & Fauster, E., 2006, Proceeding of Electronic Imaging, Machine Vision Applications in Industrial Inspection XIV. p. 607001-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Optimale Schließmechanismen für Umformwerkzeuge

    Sharifi, D., 2006, 108 p.

    Research output: Thesis › Diploma Thesis

  42. Published

    Optische Profilvermessung

    Schalk, P., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Preliminary Investigation of the Measurement of Copper Plates

    O'Leary, P. & Ofner, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Risikobewertung Advanced Coulour Measurement System ACMS

    Rath, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  45. Published

    Rißdetektion mit thermo-induktiver Methode

    Oswald-Tranta, B., Wally, G. & O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. Published

    Thermographische Untersuchung an Schmiedeteilen

    Oswald-Tranta, B., Wally, G. & O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Thermoinduktive Drahtinspektion für Oberflächenrisse

    Oswald-Tranta, B., Wally, G. & O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Thermoinduktive Drahtinspektion für Oberflächenrisse 2

    Oswald-Tranta, B., Wally, G. & O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Thermo-induktive Inspektion

    Oswald-Tranta, B. & Wally, G., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Thermoinduktive Messungen für Saarstahl AG

    Wally, G., Oswald-Tranta, B. & O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Validierung der Kategorie 4 für Temperaturwechselprüfstand des MCL Leoben

    Rath, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  52. Published

    Vermessung von geschälten Rundproben für Saarstahl AG

    Reindl, I. & O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  53. Published

    Zwischenbericht - Projekt THIRDE

    Wally, G. & Oswald-Tranta, B., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  54. 2005
  55. Published

    Positional and orientational referencing of multiple light sectioning systems for precision profile measurement

    Tratnig, M., Hlobil, H., Reisinger, J. & O'Leary, P., 21 Jul 2005, In: Proceedings of SPIE - The International Society for Optical Engineering. 5679, p. 74-85 12 p., 10.

    Research output: Contribution to journal › Conference article › peer-review

  56. Published

    Berührungsloses Magneto-Thermal Inspektionsverfahren

    O' Leary, P., Oswald-Tranta, B. & Wally, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  57. Published

    Calibration and registration approaches for light-sectioning setups featuring small fields of view

    Tratnig, M., 2005

    Research output: Thesis › Doctoral Thesis

  58. Published

    Computation of Homographies

    Harker, M. & O'Leary, P., 2005, British Machine Vision Conference 2005. BMVA-Pr., p. 310-319

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Computation of Homographies

    Harker, M. & O'Leary, P., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  60. Published

    Detection of Surface Cracks on Steel Wire using Thermo-inductive Method

    Oswald-Tranta, B., Wally, G. & O' Leary, P., 2005, Proceedings of 7th International Conference on Quality Control by Artifical Vision. p. 69-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Development and implementation of a video extensometer system

    Fauster, E., Steinberger, R. & Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  62. Published

    Development and implementation of non-contact strain and deformation test methods for polymeric materials and components

    Fauster, E., Steinberger, R., Major, Z., O'Leary, P. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  63. Published

    Direct and least square fitting of coupled geometric objects for metric vision

    O' Leary, P., Harker, M. & Zsombor-Murray, P. J., 2005, In: IEE proceedings / Vision, image and signal processing. Volume 152, p. 687-694

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Evaluation and Calibration Methods for the Application of a Video-Extensometer to Tensile Testing of Polymer Materials

    Fauster, E., Schalk, P. & O'Leary, P., 2005, Machine Vision Applications in Industrial Inspection XIII. p. 187-198

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Fast flow measurements in hot pulsating gases with capacitance ultrasonic transducers

    Schröder, A., Kupnik, M., O'Leary, P., Benes, E. & Gröschl, M., 2005, Proceeding 2st Congress of Alps Adria Acoustics Association. p. 375-380

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    First Test of Photometric Stereo for the detection of Open Cracks in Steel Blocks

    O' Leary, P., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  67. Published

    High-temperature video-extensometry for material testing of refractories

    Schalk, P., Fauster, E. & O' Leary, P., 2005, Machine Vision Applications in Industrial Inspection XIII, Electronic Imaging, Science and Technology. p. 129-139

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Incremental Matrix Orthogonalization with an Application to Curve Fitting

    Harker, M., O' Leary, P. & Zsombor-Murray, P. J., 2005, Electronic Imaging Science and Technology: Computational Imaging III. p. 354-361

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Kunststoffreflektor und Reflektorfolie als Kalibriermarkierung

    Tratnig, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  70. Published

    Machine Vision for feedback control in a steel rolling mill

    O' Leary, P., 2005, In: Computers in industry. 56, p. 997-1004

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Measurement of rotating "RHI-Schieber" part with the TBK light sectioning measurement head

    Schalk, P., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  72. Published

    Non-Destructive material and component testing

    Fauster, E., Steinberger, R. & Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  73. Published

    Optische Risserkennung an der Brammenoberfläche

    O' Leary, P. & Reindl, I., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  74. Published

    Oszillierung der Reflektormarken durch Schwingungen am Walzgerüst

    Tratnig, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  75. Published

    Panoramic Optical Servoing - A New Dimension in the Inspection and Repair of Refractories Using a Telerobot

    Sallinger, C., 2005

    Research output: Book/Report › Book › Research

  76. Published

    Positional and Orientational Referencing of Multiple Light Sectioning for Precision Profile Measurement

    Tratnig, M., Hlobil, H., Reisinger, J. & O' Leary, P., 2005, Machine Vision Applications in Industrial Inspection XIII, Electronic Imaging, Science and Technology. p. 74-85

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Proben von April 2005

    Reindl, I. & O'Leary, P., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  78. Published

    Real Time Cutter Path Generation and Control of a Hydraulically Actuated Tunnelling Robot

    Rath, G., Zsombor-Murray, P. & O'Leary, P., 2005, ISR2005 - 36th International Symposion on Robotics. p. 139-139

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    Reconstruction of the Tube Form for VA Tublars

    O' Leary, P., Schalk, P. & Ofner, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  80. Published

    Registrierung horizontal aneinandergereihte Lichtschnittmessköpfe

    Tratnig, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  81. Published

    Retroreflektoren und Reflektorfolien als Kalibriermarkierungen

    Tratnig, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  82. Published

    Risserkennung auf Brammen

    Reindl, I. & O'Leary, P., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  83. Published

    Scaled Images of Cracks on Steel Slabs

    O' Leary, P. & Reindl, I., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  84. Published

    Simulation of Calibration and Mesaurement for Material Tracking

    Harker, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  85. Published

    Simulation of Measurement Over Concatenated View Fields

    Harker, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  86. Published

    System Design Framework for Real-Time Distributed Industrial Vision Systems

    Al-Madani, B., 2005

    Research output: Thesis › Doctoral Thesis

  87. Published

    Thermographische Untersuchungen an Schmiedeteilen

    Oswald-Tranta, B. & Wally, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  88. Published

    Thermo-inductive investigations of steel wires

    Wally, G. & Oswald-Tranta, B., 2005, XXIV. Verformungskundliches Kolloquium. p. 31-40

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Thermo-inductive investigations of steel wires for surface cracks

    Oswald-Tranta, B. & Wally, G., 2005, Thermosense XXVII, Proceedings of SPIE. p. 245-254

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Thermoinduktiver Prüfstand zur Detektion von Oberflächenfehlern in ferromagnetischen Werkstoffen

    Wally, G., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  91. Published

    Tool Path Generation for 3D Laser Cladding

    Kerschbaumer, M., 2005

    Research output: Thesis › Doctoral Thesis

  92. Published

    Tool Path Generation for 3D Laser Cladding Using Adaptive Slicing Technology

    Kerschbaumer, M., Ernst, G. & O'Leary, P., 2005, Congress Proceeding Laser Materials Processing Conference. p. 310-319

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Versuchsmessungen an "Schieber" der Firma RHI

    Schalk, P., Ofner, R. & O'Leary, P., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  94. Published

    Zwischenbericht Hydraulikkreis für präzise Positionsregelung

    Rath, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  95. 2004
  96. Published

    Camera calibration, data segmentation, and fitting approaches for a visual edge inspection system

    Tratnig, M., O'Leary, P., Hlobil, H. & Reisinger, J., 1 Dec 2004, In: Proceedings of SPIE - The International Society for Optical Engineering. 5303, p. 42-51 10 p.

    Research output: Contribution to journal › Conference article › peer-review

  97. Published

    Comparison of CMOS and CCD cameras for laser profiling

    Koller, N., O'Leary, P. & Lee, P., 1 Dec 2004, In: Proceedings of SPIE - The International Society for Optical Engineering. 5303, p. 108-115 8 p.

    Research output: Contribution to journal › Conference article › peer-review

  98. Published

    Panoramic optical-servoing for industrial inspection and repair

    Sallinger, C., O'Leary, P., Retschnig, A. & Kammerhofer, M., 1 Dec 2004, In: Proceedings of SPIE - The International Society for Optical Engineering. 5303, p. 73-80 8 p.

    Research output: Contribution to journal › Conference article › peer-review

  99. Published

    Framework for automatic quality control in industrial environments using distributed image processing

    Schalk, P., Fauster, E., O'Leary, P. & Weiss, M., Jul 2004, In: Journal of electronic imaging. 13, 3, p. 504-514

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Geometrische Inspektion kleiner Walzprofile

    Tratnig, M., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  101. Published

    Geregelte Schnittsteuerung

    Rath, G., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  102. Published

    Hot Material Tracking

    Schalk, P., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  103. Published

    Lichtschnittverfahren

    Reindl, I., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  104. Published

    Schneidwegvermessung

    Ofner, R., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  105. Published

    Thermografische Inspektion

    Oswald-Tranta, B., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  106. Published

    Thermoinductive investigations of magnetic materials for surface cracks

    Oswald-Tranta, B., 2004, In: Quantitative infra red thermography (QIRT Journal). Vol.1, p. 33-46

    Research output: Contribution to journal › Article › Research › peer-review

  107. Published

    Videoextensometrie

    Schalk, P., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  108. 2003
  109. Published

    Development of a Distributed Vision System for Industrial Conditions

    Weiss, M., Schiller, A., O'Leary, P., Fauster, E. & Schalk, P., 1 Dec 2003, In: Proceedings of SPIE - The International Society for Optical Engineering. 5132, p. 91-102 12 p.

    Research output: Contribution to journal › Conference article › peer-review

  110. Published

    Calibration verification of a mining machine using image processing

    Ofner, R., Rath, G. & O'Leary, P., 1 Jan 2003, In: Proceedings of SPIE - The International Society for Optical Engineering. 5011, p. 59-65 7 p.

    Research output: Contribution to journal › Conference article › peer-review

  111. 2002
  112. Published

    Analogue realizations of fractional-order controllers

    Podlubny, I., Petráš, I., Vinagre, B. M., O'Leary, P. & Dorčák, L., 1 Jul 2002, In: Nonlinear dynamics : an international journal of nonlinear dynamics and chaos in engineering systems. 29, 1-4, p. 281-296 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  113. Published

    Fitting geometric models in image processing using grassmann manifolds

    O'Leary, P., 1 Jan 2002, In: Proceedings of SPIE - The International Society for Optical Engineering. 4664, p. 22-33 12 p.

    Research output: Contribution to journal › Conference article › peer-review

  114. 2001
  115. Published

    Schwingungsmonitoring von Gurtförderanlagen für die zustandsorientierte Instandhaltung

    Kessler, F., Haase, S., Trondl, R. & Luftensteiner, R., 2001, In: Schüttgut. p. 423-427

    Research output: Contribution to journal › Article › Research › peer-review

  116. 1999
  117. Published

    Technisch/wirtschaftliche Optimierung sowie Gleichlaufregelung eines Pocketlift-Vertikalförderers

    Kessler, F., O´Leary, P. & Grabner, K., 1999, In: Forschungsinformationen aus der Montanuniversität Leoben. 01.10.1999, p. x-y

    Research output: Contribution to journal › Article › Research › peer-review

  118. 1998
  119. Published

    Low-cost, high-precision measurement system for capacitive sensors

    Kolle, C. & O'Leary, P., 1 Jan 1998, In: Measurement science and technology. 9, 3, p. 510-517 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  120. Published

    Optical oxygen sensor instrumentation based on the detection of luminescence lifetime

    Trettnak, W., Kolle, C., Reininger, F., Dolezal, C., O'Leary, P. & Binot, R. A., 1 Jan 1998, In: Advances in Space Research. 22, 10, p. 1465-1474 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  121. 1997
  122. Published

    Fast optochemical sensor for continuous monitoring of oxygen in breath-gas analysis

    Kolle, C., Gruber, W., Trettnak, W., Biebernik, K., Dolezal, C., Reininger, F. & O'Leary, P., 1 Jan 1997, In: Sensors and Actuators, B: Chemical. 38, 1-3, p. 141-149 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  123. 1996
  124. Published

    Miniaturized luminescence lifetime-based oxygen sensor instrumentation utilizing a phase modulation technique

    Trettnak, W., Kolle, C., Reininger, F., Dolezal, C. & O'Leary, P., 1 Jan 1996, In: Sensors and Actuators, B: Chemical. 36, 1-3, p. 506-512 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  125. 1995
  126. Published

    Fiber optic and non-fiber optic double-beam pH sensors for use in a flow-through cell

    Holobar, A., Benes, R., Weigl, B. H., O'Leary, P., Raspor, P. & Wolfbeis, O. S., 1 Jan 1995, In: Analytical methods and instrumentation : AMI ; the international journal of new techniques and applications. 2, 2, p. 92-100 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  127. 1991
  128. Published

    A Direct-Digital Synthesizer with Improved Spectral Performance

    O'Leary, P. & Maloberti, F., 1 Jan 1991, In: IEEE Transactions on Communications. 39, 7, p. 1046-1048 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 Next
View graph of relations

Contact information

Peter-Tunner-Straße 25/II, 8700 Leoben
  • Main phone number: +43 3842 402 5301