New-generation biocompatible Ti-based metallic glass ribbons for flexible implants

Yüce, E., Zarazúa-Villalobos, L., Ter-Ovanessian, B., Sharifikolouei, E., Najmi, Z., Spieckermann, F., Eckert, J. & Sarac, B., 13 Sept. 2022, in: Materials and Design. 223.2022, November, 13 S., 111139.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Prior β grain evolution and phase transformation of selective laser melted Ti6Al4V alloy during heat treatment

Lu, S. L., Zhang, Z. F., Liu, R., Qu, Z., Wang, B., Zhou, X. H., Eckert, J. & Zhang, Z., 5 Sept. 2022, in: Journal of alloys and compounds. 914.2022, 5 September, 13 S., 165235.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Carbon nanotube-polybutadiene-poly(ethylene oxide)-based composite fibers: Role of cryogenic treatment on intrinsic properties

Gürbüz, R., Sarac, B., Soprunyuk, V., Rezvan, A., Yüce, E., Schranz, W., Eckert, J., Ozcan, A. & Sarac, A. S., 4 Sept. 2022, in: Polymers for Advanced Technologies. 33.2022, 12, S. 3966-3976 11 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Combining hardness measurements of a heat-treated crankshaft bearing with cross-sectional residual stress and retained austenite distributions measured by HEXRD

Mevec, D. G., Jászfi, V., Prevedel, P., Todt, J., Maawad, E., Keckes, J. & Raninger, P., 19 Aug. 2022, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials Today Communications. 33.2022, December, 8 S., 104267.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

High-Entropy Alloy-Induced Metallic Glass Transformation: Challenges Posed by in situ Alloying via Additive Manufacturing

Hadibeik Neishaboori, S., Spieckermann, F., Nosko, M., Khodabakhshi, F., Heydarzadeh Sohi, M. & Eckert, J., 18 Aug. 2022, (Elektronische Veröffentlichung vor Drucklegung.) in: Advanced engineering materials. 24.2022, 2200764.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Antibacterial activity, cytocompatibility, and thermomechanical stability of Ti₄₀Zr₁₀Cu₃₆Pd₁₄ bulk metallic glass

Rezvan, A., Sharifikolouei, E., Lassnig, A., Soprunyuk, V., Gammer, C., Spieckermann, F., Schranz, W., Najmi, Z., Cochis, A., Scalia, A. C., Rimondini, L., Manfredi, M., Eckert, J. & Sarac, B., 3 Aug. 2022, in: Materials today bio. 16.2022, December, 13 S., 100378.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of Hatch Strategy on Crystallographic Texture Evolution, Mechanical Anisotropy of Laserbeam Powder Bed Fused S316L Steel

Bodner, S., Hlushko, K., Kutleša, K., Todt, J., Renk, O., Meindlhumer, M., Resch, F., Nielsen, M.-A., Keckes, J. & Eckert, J., 2 Aug. 2022, in: Advanced engineering materials. 2022, 25 S., 2200524.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

100 years after Griffith: From brittle bulk fracture to failure in 2D materials

Kiener, D. & Han, S. M., Aug. 2022, in: MRS Bulletin. 47.2022, August, S. 792-799 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Achieving 1 GPa fatigue strength in nanocrystalline 316L steel through recovery annealing

Renk, O., Hohenwarter, A., Gammer, C., Eckert, J. & Pippan, R., Aug. 2022, in: Scripta Materialia. 217.2022, August, 5 S., 114773.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Crack propagation resistance of TiAl alloys

Pippan, R. & Hohenwarter, A., Aug. 2022, in: MRS Bulletin. 47.2022, 8, S. 824-831 8 S.

Publikationen: Beitrag in Fachzeitschrift › Übersichtsartikel › (peer-reviewed)

In situ micromechanical analysis of a nano-crystalline W-Cu composite

Burtscher, M., Alfreider, M., Kainz, C., Schmuck, K. S. & Kiener, D., Aug. 2022, in: Materials and Design. 220.2022, August, 9 S., 110848.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

FIB and Wedge Polishing Sample Preparation for TEM Analysis of Sol-Gel Derived Perovskite Thin Films

Sanz-Mateo, J., Deluca, M., Sartory, B., Benes, F. & Kiener, D., 20 Juli 2022, in: Ceramics. 5.2022, 3, S. 288-300 13 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Residual stress distribution of a locally and inductively quenched and tempered 50CrMo4 steel analysed by synchrotron transmission techniques

Jászfi, V., Prevedel, P., Raninger, P., Todt, J., Mevec, D., Godai, Y., Maawad, E. & Ebner, R., 16 Juli 2022, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials & design. 221.2022, September, 9 S., 110936.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Enhanced Oxygen Evolution Reaction of Zr-Cu-Ni-Al Metallic Glass with an Oxide Layer in Alkaline Media

Sarac, B., Ivanov, Y. P., Micusik, M., Omastova, M., Sarac, A. S., Bazlov, A. I., Zadorozhnyy, V., Greer, A. L. & Eckert, J., 14 Juli 2022, in: ACS Catalysis. 12.20220, 15, S. 9190-9200 11 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Mechanical behavior and deformation mechanism of shape memory bulk metallic glass composites synthesized by powder metallurgy

He, T., Lu, T., Şopu, D., Han, X., Lu, H., Nielsch, K., Eckert, J., Ciftci, N., Uhlenwinkel, V., Kosiba, K. & Scudino, S., 1 Juli 2022, in: Journal of Materials Science and Technology. 114.2022, 1 July, S. 42-54 13 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Interaction of metallic magnesium with ammonia: Mechanochemical synthesis of Mg(NH₂)₂ for hydrogen storage

Hu, M., Sun, X., Li, B., Li, P., Xiong, M., Tan, J., Ye, Z., Eckert, J., Liang, C. & Pan, H., 25 Juni 2022, in: Journal of alloys and compounds. 907.2022, 25 June, 6 S., 164397.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Fabrication of stainless-steel microfibers with amorphous-nanosized microstructure with enhanced mechanical properties

Sharifikolouei, E., Sarac, B., Zheng, Y., Bala, P. & Eckert, J., 24 Juni 2022, in: Scientific reports. 12.2022, 12 S., 10784.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of the 1% Ti content on microstructure, friction coefficient and contribution to the strengthening mechanisms in the Al20Sn1Cu alloy

Lucchetta, M. C., Ramasamy, P., Saporiti, F., Eckert, J. & Audebert, F. E., 22 Juni 2022, (Elektronische Veröffentlichung vor Drucklegung.) in: Results in Engineering. 15.2022, September, 8 S., 100506.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

X-ray nanodiffraction analysis of residual stresses in polysilicon electrodes of vertical power transistors

Karner, S., Blank, O., Rösch, M., Burghammer, M., Zalesak, J., Keckes, J. & Todt, J., 20 Juni 2022, (Elektronische Veröffentlichung vor Drucklegung.) in: Materialia. 24.2022, August, 6 S., 101484.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Mapping Shear Bands in Metallic Glasses: From Atomic Structure to Bulk Dynamics

Sheng, H., Şopu, D., Fellner, S., Eckert, J. & Gammer, C., 16 Juni 2022, in: Physical review letters. 128.2022, 24, 6 S., 245501.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Mitigating the detrimental effects of galvanic corrosion by nanoscale composite architecture design

Renk, O., Weißensteiner, I., Cihova, M., Steyskal, E.-M., Sommer, N., Tkadletz, M., Pogatscher, S., Schmutz, P., Eckert, J., Uggowitzer, P., Pippan, R. & Weinberg, A. M., 16 Juni 2022, in: npj Materials degradation. 47.2022, 6, 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The importance of lamellar architecture to obtain ductility in heavily cold-worked pearlitic steels revealed by microbending experiments

Kapp, M. W., Renk, O., Eckert, J. & Pippan, R., 15 Juni 2022, in: Acta Materialia. 232.2022, 15 June, 8 S., 117935.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Thermoplasticity of metallic glasses: Processing and applications

Sarac, B. & Eckert, J., Juni 2022, in: Progress in materials science. 127.2022, June, 57 S., 100941.

Publikationen: Beitrag in Fachzeitschrift › Übersichtsartikel › (peer-reviewed)

Axially and radially inhomogeneous swelling in commercial 18650 Li-ion battery cells

Blazek, P., Westenberger, P., Erker, S., Brinek, A., Zikmund, T., Rettenwander, D., Wagner, N. P., Keckes, J., Kaiser, J., Kazda, T., Vyroubal, P., Macak, M. & Todt, J., 27 Mai 2022, (Elektronische Veröffentlichung vor Drucklegung.) in: Journal of energy storage. 52.2022, 15 August, 10 S., 104563.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The influence of chemistry on the interface toughness in a WTi-Cu system

Alfreider, M., Bodlos, R., Romaner, L. & Kiener, D., 15 Mai 2022, in: Acta Materialia. 230.2022, 15 May, 13 S., 117813.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Helium-induced swelling and mechanical property degradation in ultrafine-grained W and W-Cu nanocomposites for fusion applications

Wurmshuber, M., Balooch, M., Huang, X., Hosemann, P. & Kiener, D., Mai 2022, in: Scripta materialia. 213.2022, May, 5 S., 114641.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Additive Manufacturing of CoCrFeMnNi High-Entropy Alloy/AISI 316L Stainless Steel Bimetallic Structures

Sokkalingam, R., Chao, Z., Sivaprasad, K., Muthupandi, V., Jayaraj, J., Ramasamy, P., Eckert, J. & Prashanth, K. G., 27 Apr. 2022, (Elektronische Veröffentlichung vor Drucklegung.) in: Advanced engineering materials. 25.2023, 7, 9 S., 2200341.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Composition design, synthesis and hydrogen storage ability of multi-principal-component alloy TiVZrNbTa

Zadorozhnyy, V., Tomilin, I., Berdonosova, E., Gammer, C., Zadorozhnyy, M., Savvotin, I., Shchetinin, I., Zheleznyi, M., Novikov, A., Bazlov, A., Serov, M., Milovzorov, G., Korol, A., Kato, H., Eckert, J., Kaloshkin, S. & Klyamkin, S., 25 Apr. 2022, in: Journal of alloys and compounds. 901.2022, 25 April, 10 S., 163638.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Deformation-induced medium-range order changes in bulk metallic glasses

Nomoto, K., Li, B., Gammer, C., Ceguerra, A. V., Bilal, H., Hohenwarter, A., Eckert, J., Gludovatz, B., Ringer, S. P. & Kruzic, J. J., 25 Apr. 2022, in: Physical review materials . 6.2022, 4, 043603.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Ca solubility in a BiFeO3‑based system with a secondary Bi2O3 phase on a nanoscale

Haselmann, U., Radlinger, T., Pei, W., Popov, M. N., Spitaler, T., Romaner, L., Ivanov, Y. P., Chen, J., He, Y., Kothleitner, G. & Zhang, Z., 21 Apr. 2022, in: Journal of physical chemistry C (C, Nanomaterials and interfaces). 126.2022, 17, S. 7696-7703 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructural Impact on Fatigue Crack Growth Behavior of Alloy 718

Gruber, C., Raninger, P., Maierhofer, J., Gänser, H. P., Stanojevic, A., Hohenwarter, A. & Pippan, R., 21 Apr. 2022, in: Metals. 12.2022, 5, 14 S., 710.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Tuning mechanical properties of ultrafine-grained tungsten by manipulating grain boundary chemistry

Wurmshuber, M., Jakob, S., Doppermann, S., Wurster, S., Bodlos, R., Romaner, L., Maier-Kiener, V. & Kiener, D., 19 Apr. 2022, (Elektronische Veröffentlichung vor Drucklegung.) in: Acta materialia. 232.2022, 15 June, 13 S., 117939.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Maximizing the degree of rejuvenation in metallic glasses

Yuan, X., Şopu, D., Spieckermann, F., Song, K. K., Ketov, S. V., Prashanth, K. G. & Eckert, J., 15 Apr. 2022, in: Scripta Materialia. 212.2022, 15 April, 5 S., 114575.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Thermal stress analysis and structural optimization of ladle nozzle based on finite element simulation

Rong, Z., Yi, J., Li, F., Liu, Y. & Eckert, J., 14 Apr. 2022, in: Materials Research Express. 9.2022, 4, 15 S., 045601.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Oxidation resistance of cathodic arc evaporated Cr0.74Ta0.26N coatings

Kainz, C., Saringer, C., Burtscher, M., Tkadletz, M., Stark, A., Schell, N., Pohler, M., Czettl, C., Kiener, D. & Schalk, N., 1 Apr. 2022, in: Scripta materialia. 211.2022, 1 April, 5 S., 114492.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of grain aspect-ratio on the fracture properties of ultrafine-grained tantalum

Hohenwarter, A., Rockenschaub, M. & Renk, O., Apr. 2022, in: Materials and Design. 216.2022, April, 11 S., 110545.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The beneficial effect of rolling on the fracture toughness and R-curve behavior of pure tungsten

Firneis, D., Wurster, S., Nikolić, V., Pippan, R. & Hohenwarter, A., 24 März 2022, in: Materials Science and Engineering A. 838.2022, 24 March, 8 S., 142756.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Manufacturing of Textured Bulk Fe-SmCo5 Magnets by Severe Plastic Deformation

Weissitsch, L., Stückler, M., Wurster, S., Todt, J., Knoll, P., Krenn, H., Pippan, R. & Bachmaier, A., 22 März 2022, in: Nanomaterials. 12.2022, 6, 10 S., 963.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Reactive interdiffusion of an Al film and a CoCrFeNi high-entropy alloy

Zhang, Z., Ketov, S. V., Fellner, S., Sheng, H., Mitterer, C., Song, K. K., Gammer, C. & Eckert, J., 10 März 2022, in: Materials and Design. 216.2022, April, 8 S., 110530.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Prospects of enhancing the understanding of material-hydrogen interaction by novel in-situ and in-operando methods

Massone, A. & Kiener, D., 26 Feb. 2022, in: International Journal of Hydrogen Energy . 47.2022, 17, S. 10097-10111 15 S.

Publikationen: Beitrag in Fachzeitschrift › Übersichtsartikel › (peer-reviewed)

Relaxation and Strain-Hardening Relationships in Highly Rejuvenated Metallic Glasses

Yuan, X., Şopu, D., Song, K. & Eckert, J., 24 Feb. 2022, in: Materials. 15.2022, 5, 10 S., 1702.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Impact of Si on the high-temperature oxidation of AlCr(Si)N coatings

Jäger, N., Meindlhumer, M., Zitek, M., Spor, S., Hruby, H., Nahif, F., Julin, J., Rosenthal, M., Keckes, J., Mitterer, C. & Daniel, R., 20 Feb. 2022, in: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 100.2022, 20 February, S. 91-100 10 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Nanomaterials by severe plastic deformation: review of historical developments and recent advances

Edalati, K., Bachmaier, A., Beloshenko, V. A., Beygelzimer, Y., Blank, V. D., Botta, W. J., Bryła, K., Čížek, J., Divinski, S., Enikeev, N. A., Estrin, Y., Faraji, G., Figueiredo, R. B., Fuji, M., Furuta, T., Grosdidier, T., Gubicza, J., Hohenwarter, A., Horita, Z. & Huot, J. &29 mehr, Ikoma, Y., Janeček, M., Kawasaki, M., Král, P., Kuramoto, S., Langdon, T. G., Leiva, D. R., Levitas, V. I., Mazilkin, A., Mito, M., Miyamoto, H., Nishizaki, T., Pippan, R., Popov, V. V., Popova, E. N., Purcek, G., Renk, O., Révész, Á., Sauvage, X., Sklenicka, V., Skrotzki, W., Straumal, B. B., Suwas, S., Toth, L. S., Tsuji, N., Valiev, R. Z., Wilde, G., Zehetbauer, M. J. & Zhu, X., 17 Feb. 2022, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials Research Letters. 10.2022, 4, S. 163-256 94 S.

Publikationen: Beitrag in Fachzeitschrift › Übersichtsartikel › (peer-reviewed)

Cracking mechanism in a laser powder bed fused cold-work tool steel: The role of residual stresses, microstructure and local elemental concentrations

Platl, J., Bodner, S. C., Hofer, C., Landefeld, A., Leitner, H., Turk, C., Nielsen, M.-A., Demir, A. G., Previtali, B., Keckes, J. & Schnitzer, R., 15 Feb. 2022, in: Acta materialia. 225.2022, 15 February, 16 S., 117570.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Fracture of severely plastically deformed titanium

Völker, B., Wurster, S., Pippan, R. & Hohenwarter, A., 15 Feb. 2022, in: Materials letters. 309.2022, 15 February, 4 S., 131382.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Synthesis, thermodynamic analysis and magnetic study of novel ball- milled Co₅₀Fe₂₅Ta₅Si₅C₁₅ glassy powders with high thermal stability

Taghvaei, A. H., Nickjeh, H. S., Ramasamy, P. & Eckert, J., 15 Feb. 2022, in: Journal of alloys and compounds. 894.2022, 15 February, 12 S., 162509.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Multilayer crystal-amorphous Pd-based nanosheets on Si/SiO₂ with interface-controlled ion transport for efficient hydrogen storage

Sarac, B., Ivanov, Y. P., Karazehir, T., Mühlbacher, M., Sarac, A. S., Greer, A. L. & Eckert, J., 1 Feb. 2022, in: International Journal of Hydrogen Energy . 47.2022, 10, S. 6777-6788 12 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Nanoindentation creep behavior of an Fe–Cr–Mo–B–C amorphous coating via atmospheric plasma spraying

Dong, Q., Tan, J., Huang, R., Wang, H., Song, P., Li, C. J., Feng, Z. X., Calin, M. & Eckert, J., Feb. 2022, in: Intermetallics. 141.2022, February, 9 S., 107411.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of supporting electrolyte on capacitance and morphology of electrodeposited poly(3,4-propylenedioxythiophene) derivatives bearing reactive functional groups

Sarac, B., Karazehir, T., Gilsing, H. D., Eckert, J. & Sarac, A. S., 31 Jan. 2022, in: Molecular Systems Design and Engineering. 7.2022, 5, S. 460-479 20 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Precipitation behavior of a Co-free Fe-Ni-Cr-Mo-Ti-Al maraging steel after severe plastic deformation

Zeisl, S., Lassnig, A., Hohenwarter, A. & Mendez Martin, F., 26 Jan. 2022, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 833.2022, 26 January, 9 S., 142416.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure-dependent phase stability and precipitation kinetics in equiatomic CrMnFeCoNi high-entropy alloy: Role of grain boundaries

Daniel, R., Zalesak, J., Matko, I., Baumegger, W., Hohenwarter, A., George, E. P. & Keckes, J., 15 Jan. 2022, in: Acta materialia. 223.2022, 15 January, 8 S., 117470.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Thermodynamic and kinetic interpretation of the glass-forming ability of Y-containing Cu-Zr-Al bulk metallic glasses

Malekan, M., Rashidi, R., Shabestari, S. G. & Eckert, J., 15 Jan. 2022, in: Journal of non-crystalline solids. 576.2022, 15 January, 8 S., 121266.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Structure-dynamics relationships in cryogenically deformed bulk metallic glass

Spieckermann, F., Şopu, D., Soprunyuk, V., Kerber, M. B., Bednarčík, J., Schökel, A., Rezvan, A., Ketov, S., Sarac, B., Schafler, E. & Eckert, J., 10 Jan. 2022, in: Nature Communications. 13.2022, 1, 9 S., 127.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Annealing metallic glasses above T_g in order to accelerate the relaxation process in molecular dynamics simulations

Sopu, D., Yuan, X. & Eckert, J., 6 Jan. 2022, in: Applied physics letters. 120.2022, 1, 011904.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Morphology and properties of foamed high crystallinity PEEK prepared by high temperature thermally induced phase separation

Rusakov, D., Menner, A., Spieckermann, F., Wilhelm, H. & Bismarck, A., 5 Jan. 2022, in: Journal of applied polymer science. 139, 1, 51423.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Bond strength between TiN coating and microstructural constituents of a high speed steel determined by first principle calculations

Gsellmann, M., Scheiber, D., Klünsner, T., Zalesak, J., Zhang, Z., Leitner, H., Mitterer, C., Ressel, G. & Romaner, L., 1 Jan. 2022, in: Acta materialia. 222.2022, 1 January, 9 S., 117439.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of crystal orientation on the hardness and strength of piezoelectric LiNbO3 substrates for microelectronic applications

Gruber, M., Leitner, A., Kiener, D., Supancic, P. & Bermejo, R., 2022, in: Materials and Design. 213, 110306.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Film thickness and architecture effects in biaxially strained polymer supported Al/Mo bilayers

Cordill, M., Kreiml, P., Putz, B., Trost, C. O. W., Lassnig, A., Mitterer, C., Faurie, D. & Renault, P.-O., 2022, in: Materials Today Communications. 31.2022, June, 11 S., 103455.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of interlayers on the interfacial behavior of Ag films on polymer substrates

Cordill, M., Paulitsch, M., Katsarelis, C., Putz, B., Lassnig, A. & Kennedy, M. S., 2022, in: Thin solid films. 742, 139051.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Nanobeam electron diffraction strain mapping in monocrystalline silicon of modern trench power MOSFETs

Karner, S., Blank, O., Rösch, M., Zalesak, J., Keckes, J. & Gammer, C., 2022, in: Microelectronic engineering. 264.2022, 15 August, 111870.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Soft Magnetic Properties of Ultra-Strong and Nanocrystalline Pearlitic Wires

Wurster, S., Stückler, M., Weissitsch, L., Krenn, H., Hohenwarter, A., Pippan, R. & Bachmaier, A., 22 Dez. 2021, in: Nanomaterials. 12.2022, 1, 11 S., 23.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

How electron beam melting tailors the Al-sensitive microstructure and mechanical response of a novel process-adapted y-TiAl based alloy

Wimler, D., Käsznar, K., Musi, M., Breuning, C., Markl, M., Keckes, J., Clemens, H., Körner, C. & Mayer, S., 15 Dez. 2021, in: Materials and Design. 212.2021, 15 December, 13 S., 110187.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A Perspective to Control Laser-Induced Periodic Surface Structure Formation at Glancing-Incident Femtosecond Laser-Processed Surfaces

Jelinek, A., Pfeifenberger, M. J., Pippan, R. & Kiener, D., Dez. 2021, in: JOM. 73, 12, S. 4248–4257 10 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of cold rolling on the pressure coefficient of glass transition temperature in bulk metallic glasses

Jana, P. P., Eckert, J. & Das, J., Dez. 2021, in: Thermochimica Acta. 706.2021, December, 8 S., 179071.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Quasi-static and dynamic fracture toughness of a γ-TiAl alloy: Measurement techniques, fractography and interpretation

Lintner, A., Pippan, R., Schloffer, M. & Hohenwarter, A., Dez. 2021, in: Engineering Fracture Mechanics. 258.2021, December, 14 S., 108081.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Transition metal-based high entropy alloy microfiber electrodes: Corrosion behavior and hydrogen activity

Sarac, B., Zadorozhnyy, V., Ivanov, Y. P., Spieckermann, F., Klyamkin, S., Berdonosova, E., Serov, M., Kaloshkin, S., Greer, A. L., Sarac, A. S. & Eckert, J., Dez. 2021, in: Corrosion science. 193.2021, December, 10 S., 109880.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Stainless steel reveals an anomaly in thermal expansion behavior of severely deformed materials

Renk, O., Enzinger, R. J., Gammer, C., Scheiber, D., Oberdorfer, B., Tkadletz, M., Stark, A., Sprengel, W., Pippan, R., Eckert, J., Romaner, L. & Ruban, A., 30 Nov. 2021, in: Physical review materials . 5.2021, 11, 113609.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Role of effective strain on the deformability of brittle Hf-based bulk metallic glass

Kim, S. Y., Park, E. S., Eckert, J. & Lee, M. H., 20 Nov. 2021, (Elektronische Veröffentlichung vor Drucklegung.) in: Journal of Materials Research and Technology. 15.2021, November-December, S. 6713-6720 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The transverse and longitudinal elastic constants of pulp fibers in paper sheets

Czibula, C., Brandberg, A., Cordill, M. J., Matković, A., Glushko, O., Czibula, C., Kulachenko, A., Teichert, C. & Hirn, U., 17 Nov. 2021, in: Scientific reports. 2021, 11, 22411.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Mechanical Behavior and In Vitro Corrosion of Cubic Scaffolds of Pure Magnesium Processed by Severe Plastic Deformation

Silva, C. L. P., Camara, M. A., Hohenwarter, A. & Figueiredo, R. B., 8 Nov. 2021, in: Metals. 11.2021, 11, 11 S., 1791.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

High-Temperature Nanoindentation of an Advanced Nano-Crystalline W/Cu Composite

Burtscher, M., Zhao, M., Kappacher, J., Leitner, A., Wurmshuber, M., Pfeifenberger, M. J., Maier-Kiener, V. & Kiener, D., 3 Nov. 2021, in: Nanomaterials. 11, 11, 14 S., 2951.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

High-speed nanoindentation mapping of organic matter-rich rocks: A critical evaluation by correlative imaging and machine learning data analysis

Vranjes-Wessely, S., Misch, D., Kiener, D., Cordill, M. J., Frese, N., Beyer, A., Horsfield, B., Wang, C. & Sachsenhofer, R. F., 1 Nov. 2021, in: International journal of coal geology. 247.2021, 1 November, 19 S., 103847.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Wear Behavior of a Heat-Treatable Al-3.5Cu-1.5Mg-1Si Alloy Manufactured by Selective Laser Melting

Wang, P., Lei, Y., Qi, J. F., Yu, S.-J., Setchi, R., Wu, M. W., Eckert, J., Li, H. C. & Scudino, S., 1 Nov. 2021, in: Materials. 14.2021, 22, 11 S., 7048.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

In Situ Synchrotron X-Ray Diffraction during High-Pressure Torsion Deformation of Ni and NiTi

Kerber, M. B., Spieckermann, F., Schuster, R., von Baeckmann, C., Fischer, T., Schell, N., Waitz, T. & Schafler, E., Nov. 2021, in: Advanced engineering materials. 23, 11, 9 S., 2100159.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Development of segregations in a Mg–Mn–Nd alloy during HPT processing

de Oliveira, P. C., Montoro, L. A., Perez-Prado, M. T., Hohenwarter, A., Figueiredo, R. B. & Isaac, A., 23 Okt. 2021, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials Science and Engineering A. 802.2021, 20 January, 140423.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Grain refinement effect on the Ti-45Nb alloy electrochemical behavior in simulated physiological solution

Cvijović-Alagić, I., Laketić, S., Bajat, J., Hohenwarter, A. & Rakin, M., 15 Okt. 2021, in: Surface and Coatings Technology. 423.2021, 15 October, 9 S., 127609.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Enhancement of Interfacial Hydrogen Interactions with Nanoporous Gold-Containing Metallic Glass

Sarac, B., Ivanov, Y. P., Micusik, M., Karazehir, T., Putz, B., Dancette, S., Omastova, M., Greer, A. L., Sarac, A. S. & Eckert, J., 15 Sept. 2021, in: ACS Applied Materials and Interfaces. 13.2021, 36, S. 42613-42623 11 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Porosity and thickness effect of Pd–Cu–Si metallic glasses on electrocatalytic hydrogen production and storage

Sarac, B., Karazehir, T., Yüce, E., Mühlbacher, M., Sarac, A. S. & Eckert, J., 7 Sept. 2021, in: Materials and Design. 210.2021, 15 November, 9 S., 110099.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of nanoparticles on morphology and size of primary silicon and property of selective laser melted Al-high Si content alloys

Xi, L., Guo, S., Ding, K., Prashanth, K. G., Sarac, B. & Eckert, J., Sept. 2021, in: Vacuum. 191, September, 10 S., 110405.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

In-situ TEM investigation of toughening in Silicon at small scales

Issa, I., Gammer, C., Kolitsch, S., Hohenwarter, A., Imrich, P. J., Pippan, R. & Kiener, D., Sept. 2021, in: Materials today. 48, 48, S. 29-37 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Morphology of cracks and shear bands in polymer-supported thin film metallic glasses

Glushko, O., Gammer, C., Weniger, L.-M., Sheng, H., Mitterer, C. & Eckert, J., Sept. 2021, in: Materials Today Communications. 28.2021, September, 11 S., 102547.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The Role of Phase Hardness Differential on the Non-uniform Elongation of a Ferrite-Martensite Dual Phase Steel

Basu, S., Jaya, B. N., Patra, A., Ganguly, S., Dutta, M., Hohenwarter, A. & Samajdar, I., Sept. 2021, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 52.2021, 9, S. 4018-4032 15 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)