Tanja Lube

1 - 161 out of 161Page size: 500

Research output

  1. 2025
  2. Published

    Bruchzähigkeitsmessung mittels Femtosekunden-Laserablation

    Munz, M., Krug, C. & Lube, T., 26 Feb 2025.

    Research output: Contribution to conference › Poster › Transfer › peer-review

  3. Published

    Ein Verfahren zur Festigkeitsprüfung von additiv hergestellten Keramiken

    Lube, T., Staudacher, M. & Scheithauer, U., 26 Feb 2025.

    Research output: Contribution to conference › Poster › Transfer › peer-review

  4. 2024
  5. Published

    The ball-on-three-balls strength test: In-situ testing through X-ray radiography and tomography

    Staudacher, M., Pinzón, G., Adrien, J., Lachambre, J., Maire, E., Chevalier, J. & Lube, T., Mar 2024, In: Open ceramics. 17, 100514.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Fracture toughness of Ca-, Sr-, and Ba-aluminoborosilicate glasses

    Fry, A. L., Krug, C., Ladinger, L., Lube, T., Kim, S. H. & Mauro, J. C., Feb 2024, In: Journal of the American Ceramic Society. 107, 2, p. 830-843 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    A strength testing method for additively manufactured ceramics

    Lube, T., Staudacher, M., Scheithauer, U. & Schwentenwein, M., 2024.

    Research output: Contribution to conference › Poster › Transfer › peer-review

  8. Published

    Strength and Fracture Toughness Testing of Brittle Materials and Components

    Lube, T., 2024

    Research output: Thesis › Habilitation thesis › peer-review

  9. Published

    Strength testing of additive manufactured ceramics – A round robin using the CharAM-methodology

    Staudacher, M., Scheithauer, U., Reichel, M., Schwentenwein, M. & Lube, T., 2024, In: Open ceramics. 100557.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Test Specimen for Strength Testing of Additive Manufactured Ceramics by the VPP Process: the CharAM-Specimen

    Lube, T., Staudacher, M., Scheithauer, U., Schwentenwein, M., Brouczek, D. & Schmid, H., 2024

    Research output: Non-textual form › Data set/Database › Research

  11. Published

    The Ball-on-Three-Balls strength test: Effective volumes and surfaces for Weibull strength scaling

    Staudacher, M., Eggel, A. E., Supancic, P. H. & Lube, T., 2024, In: Journal of the European Ceramic Society. 44.2024, 1, p. 173-183 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. 2023
  13. Published

    The Ball-on-Ring-test: Enhancing an analytical solution by numerical analysis for elastic deformation and small displacements

    Staudacher, M., Supancic, P. & Lube, T., 16 Aug 2023, In: Journal of the European Ceramic Society. 43.2023, 15, p. 7167-7177 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    A novel test specimen for strength testing of ceramics for additive manufacturing

    Staudacher, M., Lube, T., Glettler, J., Scheithauer, U. & Schwentenwein, M., 13 Jul 2023, In: Open ceramics. 15, 100410.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    The B3B Strength test

    Staudacher, M., Lube, T. & Supancic, P. H., 30 Mar 2023.

    Research output: Contribution to conference › Poster › Research

  16. Published

    The Ball-on-Three-Balls strength test for discs and plates: Extending and simplifying stress evaluation

    Staudacher, M., Lube, T. & Supancic, P. H., Feb 2023, In: Journal of the European Ceramic Society. 43.2023, 2, p. 648-660 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Reply to Quinn GD, Salem JA, Swab JJ. Comment On: Lubauer J, Lohbauer U, Henrich M, Munz M, Lube T, Belli R. Intricacies involving the evaluation of fracture toughness obtained by the surface-crack-in-flexure method. J Am Ceram Soc. 2022;105(12):7582-7599

    Belli, R., Lubauer, J., Lohbauer, U., Henrich, M., Munz, M. & Lube, T., 2023, In: Journal of the American Ceramic Society. p. 6371-6377

    Research output: Contribution to journal › Article › Research › peer-review

  18. 2022
  19. Published

    Stereolithography-based additive manufacturing of polymer-derived SiOC/SiC ceramic composites

    Essmeister, J., Altun, A. A., Staudacher, M., Lube, T., Schwentenwein, M. & Konegger, T., 6 Jun 2022, In: Journal of the European Ceramic Society. p. 5343-5354

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Intricacies involving the evaluation of fracture toughness obtained by the surface‐crack‐in‐flexure method

    Lubauer, J., Lohbauer, U., Henrich, M., Munz, M., Lube, T. & Belli, R., 2022, In: Journal of the American Ceramic Society. p. 7582-7599

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Methodik zur mechanischen Charakterisierung additiv gefertig-ter Bauteile als Funktion der Ausrichtung während des Bauprozesses und den daraus resultierenden Oberflächeneigenschaften (CharAM)

    Scheithauer, U., Brouczek, D., Lorenz, N., Lube, T., Reichel, M., Schmid, H., Scholz, S., Schwarzer-Fisher, E., Schwentenwein, M. & Staudacher, M., 2022, Werkstoffe und Bauteile auf dem Prüfstand: Prüftechnik – Kennwertermittlung – Schadensvermeidung: 40. Vortrags- und Diskussionstagung Werkstoffprüfung 2022.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    On the transition of failure control from material-intrinsic defects to defects forming during monotonically increasing and cyclic mechanical loading in WC-Co hard metal at elevated temperature

    Klünsner, T., Lube, T., Pichler, P., Krobath, M., Walch, L., Maier, K., Ecker, W., Marsoner, S., Czettl, C. & Pippan, R., 2022, In: Acta materialia. 235, 118087.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Stereolithographic 3D printing of ceramics: challenges and opportunities for structural integrity

    Lube, T., Staudacher, M., Hofer, A.-K., Schlacher, J. & Bermejo Moratinos, R., 2022, In: Advanced engineering materials. 2200520.

    Research output: Contribution to journal › Article › Research › peer-review

  24. 2021
  25. Published

    Distribution distortion in the statistical analysis of strength data when using multiple specimen batches

    Salem, J. A., Lube, T., Béhar-Lafenêtre, S. & Baker, E. H., 5 Oct 2021, In: Journal of the European Ceramic Society. 42

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Size effect assessment by Weibull’s approach and the coupled criterion

    Doitrand, A., Henry, R., Lube, T. & Meille, S., 10 Sept 2021, In: Engineering Fracture Mechanics. 256, 107979.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Comparison of biaxial strength measured with the Ball-on-Three-Balls- and the Ring-on-Ring-test

    Staudacher, M., Lube, T., Schlacher, J. & Supancic, P., Jun 2021, In: Open ceramics. 6, June, 10 p., 100101.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Fracture Toughness Measurement

    Lube, T., 2021, Encyclopedia of Materials: Technical Ceramics and Glasses. Oxford: Elsevier, Vol. 1. p. 762-774

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  29. 2020
  30. Published

    Influence of the Infill Orientation on the Properties of Zirconia Parts Produced by Fused Filament Fabrication

    Cano Cano, S., Lube, T., Huber, P., Gallego, A., Naranjo, J. A., Berges, C., Schuschnigg, S., Herranz, G., Kukla, C., Holzer, C. & Gonzalez-Gutierrez, J., 15 Jul 2020, In: Materials. 13.2020, 14, 19 p., 3158.

    Research output: Contribution to journal › Article › Research › peer-review

  31. E-pub ahead of print

    Strength of additive manufactured alumina

    Schlacher, J., Lube, T., Harrer, W., Mitteramskogler, G., Schwentenwein, M., Danzer, R. & Bermejo, R., 21 Apr 2020, (E-pub ahead of print) In: Journal of the European Ceramic Society. 40.2020, 14, p. 4737-4745 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Influence of WC-Co hard metal microstructure on defect density, initiation and propagation kinetics of fatigue cracks starting at intrinsic and artificial defects under a negative stress ratio

    Klünsner, T., Lube, T., Gettinger, C., Walch, L. & Pippan, R., 12 Feb 2020, In: Acta materialia. 188, p. 30-39

    Research output: Contribution to journal › Article › Research › peer-review

  33. 2019
  34. Published

    Strength of Lithography-Based Alumina

    Schlacher, J. C., Lube, T., Mitteramskogler, G., Schwentenwein, M. & Danzer, R., 9 Sept 2019.

    Research output: Contribution to conference › Poster › Research › peer-review

  35. Published

    Biaxiale Festigkeitsprüfung von Keramiken

    Supancic, P. H., Lube, T. & Danzer, R., 13 Feb 2019.

    Research output: Contribution to conference › Poster › Research › peer-review

  36. Published

    Festigkeit von additiv gefertigtem Aluminiumoxid

    Lube, T., Schlacher, J. C., Harrer, W. S., Danzer, R., Mitteramslkogler, G. & Schwentenwein, M., 13 Feb 2019.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Fatigue behaviour of WC-Co hard metal under stress ratio and effectively loaded volume relevant to metalworking tool failure

    Klünsner, T., Jonke, M., Supancic, P., Gettinger, C., Krobath, M., Lube, T., Marsoner, S. & Glätzle, J., 4 Jan 2019, In: International Journal of Refractory Metals and Hard Materials. 80, p. 97-103 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Fracture toughness of Silicon Nitride Measured by the Surface Crack in Flexure (SCF) Test Method

    Nindhia, T. G. T. & Lube, T., 2019, In: IOP Conference Series: Materials Science and Engineering. 622, 012001.

    Research output: Contribution to journal › Article › Transfer › peer-review

  39. Published

    Single Edge Precrack V-Notched Beam (SEPVNB) Fracture Toughness Testing on Silicon Nitride

    Nindhia, T. G. T. & Lube, T., 2019, Materials science forum. Trans Tech Publications, Vol. 962. p. 205-209 5 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  40. 2018
  41. Published

    Corrigendum to "Surface Crack in Tension or in Bending - A Reassessment of the Newman and Raju Formula in Respect to Fracture Toughness Measurements in Brittle Materials" [J. Eur. Ceram. Soc. 32 (8) (2012) 1491–1501]

    Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2018, In: Journal of the European Ceramic Society. p. 355-358 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Fracture Toughness (KIC) of Lithography Based Manufactured Alumina Ceramic

    Nindhia, T. G. T., Schlacher, J. C. & Lube, T., 2018, In: IOP Conference Series: Materials Science and Engineering. 012022.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Fracture toughness of silicon nitride balls via thermal shock

    Strobl, S., Adlmann, F. A., Supancic, P., Lube, T., Danzer, R. & Schöppl, O., 2018, In: Journal of the European Ceramic Society. p. 1278–1287

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Fracture toughness testing of biomedical ceramic-based materials using beams, plates and discs

    Belli, R., Wendler, M., Petschelt, A., Lube, T. & Lohbauer, U., 2018, In: Journal of the European Ceramic Society. 38, 16, p. 5533-5544 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Mechanische Eigenschaften von gedruckten Keramiken

    Lube, T., Schlacher, J., Harrer, W., Danzer, R., Mitteramskogler, G. & Schwentenwein, M., 2018, Praktische Metallographie Sonderband. Vol. 52. p. 229-234

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. 2017
  47. Published

    Additive Fertigung von Keramiken

    Lube, T. & Harrer, W. S., 13 Nov 2017.

    Research output: Contribution to conference › Poster › Transfer

  48. Published

    Strength of Al2O3-Ceramic Produced by the LCM Additive Manufacturing Technology

    Lube, T., Schlacher, J. C., Harrer, W. S., Mitteramskogler, G., Schwentenwein, M. & Danzer, R., 12 Jul 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  49. Published

    Chairside CAD/CAM materials. Part 2: flexural strength testing

    Belli, R., Wendler, M., Petschelt, A., Mevec, D., Lube, T., Harrer, W., Danzer, R. & Lohbauer, U., 2017, In: Dental Materials. 33, 1, p. 99-109 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Fractography of zirconia-specimens made using additive manufacturing (LCM) technology

    Harrer, W. S., Schwentenwein, M., Lube, T. & Danzer, R., 2017, In: Journal of the European Ceramic Society. 37, p. 4331-4338

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Lifetime Prediction of Ceramic Components - A Case Study on Hybrid Rolling Contact

    Khader, I., Rasche, S., Lube, T., Raga, R., Degenhardt, U. & Kailer, A., 2017, In: Engineering Fracture Mechanics. 169, p. 292-308 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Strength behaviour of etched Zerodur®

    Lube, T. & Béhar-Lafenêtre, S., 2017, In: Journal of the European Ceramic Society. 37

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Surface strength of balls made of five structural ceramic materials evaluated with the Notched Ball Test (NBT)

    Strobl, S., Lube, T., Supancic, P., Schöppl, O. & Danzer, R., 2017, In: Journal of the European Ceramic Society. 37, 15, p. 5065-5070 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. 2016
  55. Published

    Messung der Bruchzähigkeit mit dem B3B-Test

    Lube, T. & Rasche, S., 4 Apr 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  56. Published

    Analysis of the effective thermoelastic properties and stress fields in silicon nitride based on EBSD data

    Othmani, Y., Böhlke, T., Lube, T., Fellmeth, A., Chlup, Z., Colonna, F. & Hashibon, A., 2016, In: Journal of the European Ceramic Society. 36, p. 1109-1125 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    A New Fracture Toughness Test for Ceramic Discs and Plates

    Lube, T., Rasche, S. & Nindhia, T. G. T., 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  58. Published

    B3B-KIc fracture toughness test – geometric function formulae for semi-elliptical surface cracks in bi-axial bending

    Lube, T., Rasche, S. & Nindhia, T. G. T., 2016, In: Journal of the American Ceramic Society. 99, 1, p. 249–256

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Biaxial strength testing of dental CAD/CAM block materials

    Wendler, M., Belli, R., Petschelt, A., Mevec, D., Harrer, W., Lube, T., Danzer, R. & Lohbauer, U., 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  60. Published

    Die Messung der Bruchzähigkeit von Keramiken: State of the Art und neue Methoden

    Danzer, R. & Lube, T., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  61. Published

    Fracture toughness of Ceramic Discs and Plates

    Lube, T., Rasche, S. & Nindhia, T. G. T., 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  62. Published

    Recent Advances on Fast Fracture Strength of Zerodur® for Space Applications

    Béhar-Lafenêtre, S., Lube, T. & Ait-Zaid, S., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  63. Published

    Recent Andvances on Fast Fracture Strength of Zerodur® for Space Applications

    Béhar-Lafenêtre, S., Lube, T. & Ait-Zaid, S., 2016.

    Research output: Contribution to conference › Paper › peer-review

  64. 2015
  65. Published

    Vertraulicher Bericht: Endbericht (P048-F-02-03)

    Preis, W., Bucher, E., Sitte, W., Egger, A., Perz, M., Schrödl, N., Waldhäusl, J., Lube, T., Kusnezoff, M., Lawlor, V. & Werl, M., 3 Dec 2015

    Research output: Book/Report › Commissioned report › Research

  66. Published

    Vertraulicher Bericht: Publizierbarer Endbericht (P048-F-02-03)

    Preis, W., Bucher, E., Sitte, W., Egger, A., Perz, M., Schrödl, N., Waldhäusl, J., Lube, T., Kusnezoff, M., Lawlor, V. & Werl, M., 3 Dec 2015

    Research output: Book/Report › Commissioned report › Research

  67. Published

    The importance of mechanical testing for design with ceramics

    Lube, T., 7 Oct 2015.

    Research output: Contribution to conference › Paper › peer-review

  68. Published

    Determination of fracture toughness of small discs using the ball-on-three-balls test

    Lube, T., Rasche, S., Nindhia, T. G. T. & Strobl, S., 22 Jun 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  69. Published

    Bruchzähigkeitsmessung an keramischen Scheiben und Platten

    Lube, T., Rasche, S. & Nindhia, T. G. T., 9 Apr 2015.

    Research output: Contribution to conference › Poster › Research

  70. Published

    Macroscopic damage modeling for silicon nitride

    Ruck, J., Othmani, Y., Lube, T., Khader, I., Kailer, A. & Böhlke, T., 2015, In: Proceedings in applied mathematics and mechanics. 15, p. 147-148 2 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    On the Development of Experimental Methods for the Determination of Fracture Toughness Parameters of Ceramics

    Danzer, R., Lube, T. & Rasche, S., 2015, Recent Trends in Fracture and Damage Mechanics. Hütter, G. & Zybell, L. (eds.). Heidelberg: Springer, p. 197-214 18 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  72. Published

    Testing Methods on Ceramic Rolling Elements for Hybrid Bearings

    Schöppl, O. & Lube, T., 2015, In: Materials Performance and Characterization. 4, 1

    Research output: Contribution to journal › Article › Research › peer-review

  73. 2014
  74. Published

    Vertraulicher Zwischenbericht vom 25.4.2014 (P048-F-02-03)

    Preis, W., Bucher, E., Egger, A., Perz, M., Schrödl, N., Waldhäusl, J., Sitte, W., Lube, T., Lawlor, V., Janics, A., Hochenauer, C. & Kusnezoff, M., 25 Apr 2014

    Research output: Book/Report › Commissioned report › Transfer

  75. Published

    Apparent R-curve of Laminates with Strong Interfaces made from Al2O3 and Al2O3/ZrO2-Composites

    Lube, T., 2014, Encyclopedia of Thermal Stresses. p. 6643-6647

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  76. Published

    Ber-08-2014-RoLiCer: RoLiCer Deliverable 2.1: Tool for Calculation of Stress Intensity Factors

    Rasche, S. & Lube, T., 2014

    Research output: Book/Report › Commissioned report › Transfer

  77. Published

    Ber-28-2014-RoLiCer: RoLiCer Deliverable 8.4: Workshop “metal forming” September 2014

    Lube, T., 2014

    Research output: Book/Report › Commissioned report › Transfer

  78. Published

    Ber-34-2014-RoLiCer: RoLiCer Deliverable 6.3: Optimal surface finish for ceramic balls

    Lube, T., Harrer, W. & Vieillard, C., 2014

    Research output: Book/Report › Commissioned report › Transfer

  79. Published

    Ber-35-2014-ELTSECCS: Deliverable: 4.1 Materialparameter als Funktion unterschiedlicher Betriebsbedingungen

    Lube, T. & Harrer, W., 2014

    Research output: Book/Report › Commissioned report › Transfer

  80. Published

    Ber-57-2014-RoLiCer: RoLiCer Deliverable 5.6: Industrial Field test: Wire Rolling Analysis and documentation

    Harrer, W. & Lube, T., 2014

    Research output: Book/Report › Commissioned report › Transfer

  81. Published

    Ber-66-2014-RoLiCer: RoLiCer @ MUL: Periodic Report (Month 36)

    Lube, T. & Rasche, S., 2014

    Research output: Book/Report › Commissioned report › Transfer

  82. Published

    Determination of strength and fracture toughness of small ceramic discs using the small punch test and the ball-on-three-balls test

    Rasche, S., Strobl, S., Kuna, M., Bermejo Moratinos, R. & Lube, T., 2014, In: Procedia Materials Science. p. 961-966

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Ermüdungsbruch in Siliziumnitrid

    Lube, T., Khader, I., Kailer, A., Degenhardt, U. & Berroth, K., 2014, Fortschritte in der Metallographie. p. 353-357

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  84. Published

    Fracture toughness testing of small ceramic discs and plates

    Strobl, S., Rasche, S., Krautgasser, C., Sharova, E. & Lube, T., 2014, In: Journal of the European Ceramic Society. p. 1637-1642

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Mechanical Properties and Reliability of Advanced Ceramics

    Lube, T. & Danzer, R., 2014, Advanced Ceramics for Dentristry. p. 173-199

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  86. Published

    Mechanical properties of silicon nitride rolling elements in dependence of size and shape

    Strobl, S., Lube, T., Supancic, P., Stoiser, M., Schöppl, O. & Danzer, R., 2014, In: Journal of the European Ceramic Society. p. 4167-4176

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Toughness measurement on ball specimens. Part II: Experimental procedure and measurement uncertainties

    Strobl, S., Lube, T. & Schöppl, O., 2014, In: Journal of the European Ceramic Society. p. 1881-1892

    Research output: Contribution to journal › Article › Research › peer-review

  88. 2013
  89. Published

    Ber-08-2013-RoLiCer: RoLiCer @ MUL: MONTH 10 - 15

    Lube, T. & Rasche, S., 2013

    Research output: Book/Report › Commissioned report › Transfer

  90. Published

    Ber-09-2013-RoLiCer: RoLiCer Deliverabele 6.1: Fatigue under cyclic loading with R = -1

    Lube, T., 2013

    Research output: Book/Report › Commissioned report › Transfer

  91. Published

    Ber-14-2013-RoLiCer: RoLiCer Deliverable 8.2: Workshop “Fracture Mechanics” at MUL, May 2nd – 3rd, 2013

    Lube, T., 2013

    Research output: Book/Report › Commissioned report › Transfer

  92. Published

    Ber-20-2013-RoLiCer: RoLiCer @ MUL: Periodic Report (MONTH 18)

    Lube, T. & Rasche, S., 2013

    Research output: Book/Report › Commissioned report › Transfer

  93. Published

    Mechanical Properties of Ceramics

    Danzer, R., Lube, T., Morrell, R. & Supancic, P., 2013, Handbook of Advanced Ceramics. Amsterdam: Elsevier, p. 609-632

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  94. Published

    Vertraulicher Zwischenbericht vom 9.4.2013 (P048-F-02-03)

    Preis, W., Bucher, E., Egger, A., Perz, M., Schrödl, N., Waldhäusl, J., Sitte, W., Lube, T., Weirum, G., Janics, A., Hochenauer, C. & Kusnezoff, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  95. Published

    Zyklische Ermüdung technischer Keramiken in wässrigen Medien

    von der Wehd, C., Lube, T., Berroth, K., Khader, I., Kailer, A. & Degenhardt, U., 2013, Fortschritte in der Werkstoffprüfung für Forschung und Praxis. p. 379-384

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  96. 2012
  97. Published

    A Residual Stress Intensity Factor Solution for Knoop Indentation Cracks

    Lube, T., Fett, T., Fünfschilling, S., Hoffmann, M. & Oberacker, R., 2012, In: International Journal of Fracture. 175, p. 65-71

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Ber-41-2012-Rolicer: RoLiCer @ MUL: MONTH 1 - 3

    Lube, T. & Rasche, S., 2012

    Research output: Book/Report › Commissioned report › Transfer

  99. Published

    Ber-42-2012-Rolicer: RoLiCer @ MUL: MONTH 4 - 9

    Lube, T. & Rasche, S., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  100. Published

    Surface Crack in Tension or in Bending - A Reassessment of the Newman and Raju Formula in Respect to Fracture Toughness Measurements in Brittle Materials

    Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 1491-1501

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    The Effect of Defects and Materials Texture on the Fracture of Low-Pressure Injection Moulded Alumina Components

    Lube, T., Morrell, R. & Kraleva, I., 2012, Fractography of Glasses and Ceramics VI. p. 57-64

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  102. Published

    The Notched Ball Test - Charaterisation of Surface Defects and Their Influence on Strength

    Lube, T., Witschnig, S., Supancic, P., Danzer, R. & Schöppl, O., 2012, Fractography of Glasses and Ceramics VI. p. 225-234

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  103. Published

    Toughness Measurement on Ball Specimens, Part I: Theoretical Analysis

    Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 1163-1173

    Research output: Contribution to journal › Article › Research › peer-review

  104. 2011
  105. Published

    Bruch von Keramiken aufgrund von Kontaktschädigung am Beispiel von Hüftgelenksimplantaten

    Danzer, R., Harrer, W. & Lube, T., 2011, Tagungsskript 10. Tagung Gefüge und Bruch. p. 127-133

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  106. Published

    Defects and Fracture Statistics in Low-Pressure Injection Moulded Alumina Components

    Lube, T. & Kraleva, I., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 488-495

    Research output: Contribution to journal › Article › Research › peer-review

  107. Published

    Fracture Mechanisms of Structural and Functional Multilayer Ceramic Structures

    Bermejo Moratinos, R., Sestakova, L., Grünbichler, H., Lube, T., Supancic, P. & Danzer, R., 2011, Key engineering materials. Vol. 465. p. 41-46 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  108. Published

    Sub-critical crack growth in alumina - a comparison of different measurement and evaluation methods

    Lube, T. & Baierl, R., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. 156, p. 450-458

    Research output: Contribution to journal › Article › Research › peer-review

  109. 2010
  110. Published

    Aspects of strain and strength measurement in miniaturised testing for engineering metals and ceramics

    Lord, D. J., Roebuck, B., Morrell, R. & Lube, T., 2010, In: Materials science and technology. 26, p. 127-148

    Research output: Contribution to journal › Article › Research › peer-review

  111. Published

    Defects and Fracture Statistics in Low-pressure Injection Moulded Alumina Components

    Lube, T., Kraleva, I. & Veskovic, S., 2010, In: Practical metallography = Praktische Metallographie. 42, p. 159-164

    Research output: Contribution to journal › Article › Research › peer-review

  112. Published

    Fracture of Ceramics

    Danzer, R., Lube, T., Supancic, P. & Damani, R., 2010, Ceramics Science and Technology. p. 531-575

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  113. Published

    Fracture Toughness of Silicon Carbide Whisker Reinforced High Alumina Refractory

    Nindhia, T. T. G. & Lube, T., 2010, Proceedings of the 18th European Conference on Fracture. p. 836-840

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  114. Published

    Keramische Verbundwerkstoffe

    Danzer, R. & Lube, T., 2010, In: MP materials testing : Materialprüfung . p. 20-26

    Research output: Contribution to journal › Article › Research › peer-review

  115. Published

    Optimal strength and fracture toughness of damage tolerant multilayer ceramics

    Bermejo, R., Sestakova, L., Lube, T. & Danzer, R., 2010, 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  116. 2009
  117. Published

    Comparison of Fracture Toughness Testing by the SEVNB- and the SCF Method in Silicon Nitride

    Nindhia, T. T. G. & Lube, T., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  118. Published

    Fracture Toughness of Silicon Nitride measured by the Surface Crack in Flexure Method

    Lube, T. & Nindhia, T. T. G., 2009, 9. Tagung Gefüge und Bruch. p. P9-P9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  119. Published

    Fracture Toughness of Silicon Nitride measured by the Surface Crack in Flexure Method

    Nindhia, T. T. G. & Lube, T., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  120. Published

    Influence of an Apparent R-curve on Strength and Fracture Statistics of Ceramic Laminates

    Danzer, R., Pascual-Hererro, J. & Lube, T., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 1137-1144

    Research output: Contribution to journal › Article › Research › peer-review

  121. Published

    Influence of the Sample Size on the Results of B3B-Tests

    Harrer, W., Danzer, R., Supancic, P. & Lube, T., 2009, Key engineering materials. Vol. 409. p. 176-184 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  122. Published

    Keramische Verbundwerkstoffe

    Danzer, R. & Lube, T., 2009, Proceedings zu "9. Tagung Gefüge und Bruch". p. 211-220

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  123. 2008
  124. Published

    Comparative Study of the R-curve Behaviour of Al2O3-ZrO2 Laminates designed with External and Internal Compressive Layers

    Bermejo Moratinos, R., Pascual-Herrero, J., Lube, T. & Danzer, R., 2008, Proceedings of the X International Conference of the European Ceramic Society. p. 243-247

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  125. Published

    Einfluss von Kontaktspannungen auf die Bestimmung der Festigkeit im 4-Kugel-Versuch

    Harrer, W., Danzer, R., Supancic, P. & Lube, T., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  126. Published

    Fracture of Ceramics

    Danzer, R., Lube, T., Supancic, P. & Damani, R. J., 2008, In: Advanced engineering materials. 10, p. 275-298

    Research output: Contribution to journal › Article › Research › peer-review

  127. Published

    Fracture Statistics of Ceramic Laminates Strengthened by Compressive Residual Stresses

    Pascual-Herrero, J., Lube, T. & Danzer, R., 2008, In: Journal of the European Ceramic Society. 28, p. 1551-1556

    Research output: Contribution to journal › Article › Research › peer-review

  128. Published

    Influence of Contact Stress on the Determination of Strength in the Ball-on-Three-Balls Test

    Harrer, W., Danzer, R., Supancic, P. & Lube, T., 2008, In: Practical metallography = Praktische Metallographie. 45, p. 18-32

    Research output: Contribution to journal › Article › Research › peer-review

  129. Published

    Optimal Strength and Toughness of Al2O3-ZrO2-Laminates Designed with External or Internal Compressive Layers

    Bermejo Moratinos, R., Pascual-Herrero, J., Lube, T. & Danzer, R., 2008, In: Journal of the European Ceramic Society. 28, p. 1575-1583

    Research output: Contribution to journal › Article › Research › peer-review

  130. Published

    Strength of Small Ceramic Specimens - A Limit to Weibull Statistics

    Danzer, R., Supancic, P. & Lube, T., 2008, Proceedings of the 10th International Conference of the European Ceramic Society. p. 1266-1270

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  131. Published

    The Ball on Three Balls Test: Strength Testing of Specimens of Different Sizes and Geometries

    Harrer, W., Danzer, R., Supancic, P. & Lube, T., 2008, Proceedings of the 10th International Conference of the European Ceramic Society. p. 1271-1275

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  132. 2007
  133. Published

    A Silicon Nitride Reference Material - A Testing Program of ESIS TC6

    Lube, T. & Dusza, J., 2007, In: Journal of the European Ceramic Society. 27, p. 1203-1209

    Research output: Contribution to journal › Article › Research › peer-review

  134. Published

    Der 4-Kugel-Versuch: Prüfung der Festigkeit scheiben- und plattenförmiger Bauteile

    Danzer, R., Harrer, W., Supancic, P. & Lube, T., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  135. Published

    Effective Elastic Properties and Damping Behaviour of Alumina-Alumina/Zirconia Laminates

    Lambrinou, K., van der Biest, O., Lube, T., Tassini, N., Patsias, S., Chalvet, F. & de Portu, G., 2007, In: Journal of the European Ceramic Society. 27, p. 1307-1311

    Research output: Contribution to journal › Article › Research › peer-review

  136. Published

    Effective Fracture Toughness in Al2O3-Al2O3/ZrO2 Laminates

    Lube, T., Pascual-Herrero, J., Chalvet, F. & de Portu, G., 2007, In: Journal of the European Ceramic Society. 27, p. 1449-1453

    Research output: Contribution to journal › Article › Research › peer-review

  137. Published

    Fracture Statistics of Ceramics - Weibull Statistics and Deviations from Weibull Statistics

    Danzer, R., Supancic, P., Pascual Herrero, J. & Lube, T., 2007, In: Engineering Fracture Mechanics. 74, p. 2919-2932

    Research output: Contribution to journal › Article › Research › peer-review

  138. Published

    Geometry Effect on the Thermal Shock Response of Al2O3/ZrO2 Multilayered Ceramics

    Bermejo Moratinos, R., Supancic, P. & Lube, T., 2007, Key engineering materials. Vol. 333. p. 251-254 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  139. Published

    Geometry effect on the thermal shock response of Al2O 3/ZrO2 multilayered ceramics

    Bermejo, R., Supancic, P. & Lube, T., 2007, In: Key Engineering Materials. 333, p. 251-254 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  140. Published

    Influence of Contact Damage on Strength and Fractography of Ball on Three Balls Test Specimens

    Danzer, R., Harrer, W., Lube, T. & Supancic, P., 2007, Fractography of Glasses and Ceramics V. p. 203-214

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  141. Published

    Mechanical Properties of Ceramic Laminates

    Lube, T., 2007, Key Engineerng Materials. Vol. 333. p. 87-96 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  142. Published

    Optimierung des R-Kurvenverhaltens von Al2O3-ZrO2 Schichtkeramiken mit oberflächennahen und internen Druckeigenspannungen

    Bermejo Moratinos, R., Pascual-Herrero, J., Lube, T. & Danzer, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  143. Published

    Strain Mismatch in Ceramic Multilayers: Determination by Strength Measurements

    Pascual-Herrero, J., Chalvet, F., Lube, T. & de Portu, G., 2007, Key engineering materials. Vol. 333. p. 239-242 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  144. Published

    The Ball on three Balls Test - Strength and Failure Analysis of Different Materials

    Danzer, R., Harrer, W., Supancic, P., Lube, T., Wang, Z. & Boerger, A., 2007, In: Journal of the European Ceramic Society. 27, p. 1481-1485

    Research output: Contribution to journal › Article › Research › peer-review

  145. 2006
  146. Published

    4th Year Progress Report & Final Report 2006-36a

    Lube, T., Pascual-Herrero, J. & Bermejo Moratinos, R., 2006

    Research output: Book/Report › Commissioned report › Research

  147. Published

    Biaxial Strength Testing on Mini Specimens

    Danzer, R., Supancic, P., Harrer, W., Lube, T. & Börger, A., 2006, Fracture of Nano and Engineering Materials and Structures. Springer, p. 589-590

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  148. Published

    Contact strength measurements on aluminia and shield 2006-18

    Lube, T., Bermejo Moratinos, R. & Pascual Herrero, J., 2006

    Research output: Book/Report › Commissioned report › Research

  149. Published

    Einfluss von Kontaktspannungen auf die Bestimmung der Festigkeit im 4-Kugelversuch

    Danzer, R., Harrer, W., Supancic, P. & Lube, T., 2006, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 487-494

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  150. Published

    Indentation Techniques to Estimate Surface Residual Stresses

    Lube, T. & Pascual-Herrero, J., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  151. Published

    Risswiderstand in keramischen Schichtverbunden

    Pascual-Herrero, J., Lube, T., Danzer, R. & Bermejo, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  152. Published

    Risswiderstand in keramischen Schichtverbunden

    Pascual-Herrero, J., Lube, T. & Danzer, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  153. Published

    Task Report Task K: Fracture Mechanical Analysis Reliability 2006-36b

    Lube, T., Pascual-Herrero, J. & Bermejo Moratinos, R., 2006

    Research output: Book/Report › Commissioned report › Research

  154. Published

    Thermal Shock Features of Alumina-Zirconia Layered Ceramics

    Bermejo Moratinos, R., Supancic, P. & Lube, T., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  155. Published

    Weight Function, J-Integral and Material Forces Approach to Apparent Toughness of Ceramic Multilayers

    Pascual-Herrero, J., Chen, C. R., Kolednik, O., Fischer, F., Danzer, R. & Lube, T., 2006, Fracture of Nano and Engineering Materials and Structures: Proceedings of the 16th European Conference of Fracture, Alexandroupolis, Greece, July 3-7, 2006 . Dordrecht: Springer, p. 317-318

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  156. 2005
  157. Published

    A Silicon Nitride Reference Material for Ceramic Design

    Lube, T., Alcala, J., Dusza, J. & Klemm, H., 2005, Proceedings of 11th International Conference on Fracture. Eigenverlag, p. 3079-3084

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  158. Published

    Effective Elastic Properties and Damping Behaviour of Alumina - Alumina/Zirconia Laminates

    Lambrinou, K., van der Biest, O., Lube, T., Tassini, N., Patsias, S., Chalvet, F. & de Portu, G., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  159. Published

    Finite Element Stress and Temperature Analysis

    Lube, T. & Bartsch, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  160. Published

    Fracture of Monoliths Fabricated by Stacking Water Processed Green Ceramic Tapes

    Pascual-Herrero, J., Gurauskis, J., Lube, T., Sànchez-Herencia, A. J. & Baudin, C., 2005, Key engineering materials. Vol. 290. p. 203-207 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  161. Published

    Fracture Statistics of Ceramics - A Short Overview

    Danzer, R., Lube, T. & Supancic, P., 2005, Proceeding of 11th International Conference on Fracture. Eigenverlag, p. 3676-3681

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  162. Published

    International cracks in multilayers. Parametrical study of tunneling and densification mismatch cracks

    Pascual-Herrero, J. & Lube, T., 2005

    Research output: Book/Report › Commissioned report › Research

  163. Published

    Mid Term review plus annexes

    Lube, T. & Pascual-Herrero, J., 2005

    Research output: Book/Report › Commissioned report › Research

  164. Published

    Optimizing the effective R-curve for structural Al2O3-Al2O3/ZrO2 through the multilayer architecture

    Pascual-Herrero, J. & Lube, T., 2005

    Research output: Book/Report › Commissioned report › Research

  165. Published

    R-curves in Al2O3 - Al2O3/ZrO2 Laminates

    Pascual-Herrero, J., Chalvet, F., Lube, T. & De Portu, G., 2005, Key engineering materials. Vol. 290. p. 214-221 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  166. Published

    Strength Distributions in Ceramic Laminates

    Pascual-Herrero, J., Chalvet, F., Lube, T. & De Portu, G., 2005, In: Materials Science Forum . 492-493, p. 492-493

    Research output: Contribution to journal › Article › Research › peer-review

  167. Published

    Structural Integrity of Ceramic Multilayers and Coatings

    Pascual-Herrero, J. & Lube, T., 2005

    Research output: Book/Report › Commissioned report › Research

  168. Published

    Thermal Shock Bavior of an Al2O3/ZrO2 Multilayered Ceramic with Residual Stresses due to Phase Transformations

    Bermejo, R., Lanes, L., Anglada, M., Supancic, P. & Lube, T., 2005, Key engineering materials. Vol. 290. p. 191-198 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  169. Published

    Thermal shock behavior of an Al2O3/ZrO2 multilayered ceramic with residual stresses due to phase transformations

    Bermejo, R., Llanes, L., Anglada, M., Supancic, P. & Lube, T., 2005, In: Key Engineering Materials. 290, p. 191-198 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  170. Published

    Tunneling cracks: Effective toughness

    Pascual-Herrero, J. & Lube, T., 2005

    Research output: Book/Report › Commissioned report › Research

  171. 2004
  172. Published

    Quantitative determination of the volume fraction of intergranular amorphous phase in sintered silicon nitride

    Roebben, G., Sarbu, C., Lube, T. & Van der Biest, O., 15 Apr 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 370, 1-2, p. 453-458 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  173. Published

    Delayed failure behaviour of the ESIS silicon nitride reference material at 1200 °C in air

    Kovalcík, J., Dusza, J., Lube, T. & Danzer, R., 1 Feb 2004, In: Materials letters. 58, 6, p. 871-875 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  174. Published

    A Threshold Stress Intensity Factor at the Onset of Stable Extension of Knoop Indentation Cracks

    Lube, T. & Fett, T., 2004, In: Engineering Fracture Mechanics. p. 2263-2269

    Research output: Contribution to journal › Article › Research › peer-review

  175. 2003
  176. Published

    Failure statistics beyond the Weibull behavior

    Danzer, R., Supancic, P. & Lube, T., 8 Dec 2003, In: Ceramic Engineering and Science Proceedings. 24, 4, p. 497-502 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  177. Published

    The ESIS silicon nitride reference material testing program

    Lube, T. & Danzer, R., 8 Dec 2003, In: Ceramic Engineering and Science Proceedings. 24, 4, p. 337-342 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  178. 2002
  179. Published

    Indentation cracks in silicon nitride

    Lube, T., 2 Dec 2002, Key engineering materials. Vol. 223. p. 27-38 12 p. (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  180. Published

    The Thermo-mechanical Response to a General Loading Path of a Martensitically Transforming Steel

    Antretter, T., Fischer, F. D., Lube, T., Tanaka, K. & Cailletaud, G., 2002, In: Journal of intelligent material systems and structures. 13, 12, p. 881-815

    Research output: Contribution to journal › Article › Research › peer-review

  181. 2001
  182. Published

    Monte Carlo simulations of strength distributions of brittle materials - Type of distribution, specimen and sample size

    Danzer, R., Lube, T. & Supancic, P., 1 Jul 2001, In: Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. 92, 7, p. 773-783 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  183. Published

    Indentation crack profiles in silicon nitride

    Lube, T., 1 Feb 2001, In: Journal of the European Ceramic Society. 21, 2, p. 211-218 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  184. 1997
  185. Published

    Development of a bending-test device for small samples

    Lube, T. & Manner, M., 1 Dec 1997, Key engineering materials. Vol. 132-136. p. 488-491 4 p. (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  186. Published

    The miniaturisation of the 4-point-bend test

    Lube, T., Manner, M. & Danzer, R., 1 Dec 1997, In: Fatigue & fracture of engineering materials & structures : Fatigue and fracture of engineering materials and structures. 20.1997, 11, p. 1605-1616 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  187. 1994
  188. Published

    Mechanical properties of some Si3N4 automotive gas turbine rotor ceramics

    Dusza, J., Lube, T., Danzer, R. & Weisskopf, K. L., 1 Jan 1994, Key Engineering Materials. Aedermannsdorf, Switzerland: Trans Tech Publications, Vol. 89-91. p. 535-540 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

View graph of relations

Contact

Phone: 4111

Latest Research Output

View more (161)