Paul O'Leary

(Former)

201 - 250 out of 266Page size: 50

Research output

  1. 2006
  2. Published

    Adaptive pulse repetition frequency technique for an ultrasonic transit-time gas flowmeter for hot pulsating gases

    Kupnik, M., Schröder, A., O'Leary, P., Benes, E. & Gröschl, M., 1 Aug 2006, In: IEEE sensors journal. 6, 4, p. 906-915 10 p., 1661570.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    A Capacitance Ultrasonic Transducer with Micromaschined Backplate for Fast Flow-Measurements in Hot Pulsating Gases

    Schröder, A., Kupnik, M., O'Leary, P., Benes, E. & Gröschl, M., 2006, In: IEEE sensors journal. VOL. 6, p. 898-905

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Adaptive pulse repetition frequency for an ultrasonic transit-time gas flowmeter for hot pulsating gases

    Kupnik, M., Schröder, A., O'Leary, P., Benes, E. & Gröschl, M., 2006, In: IEEE sensors journal. VOL. 6, p. 906-915

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Automatic Positioning of a Robot

    O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  6. Published

    Direct Estimation of Homogeneous Vectors: An Ill-Solved Problem in Computer Vision

    Harker, M. & O'Leary, P., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    Direct Estimation of Homogeneous Vectors: An Ill-Solved Problem in Computer Vision

    Harker, M. & O'Leary, P., 2006, Indian Conference on Computer Vision, Graphics and Image Processing. Springer, p. 919-930

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Erkennung, Vermessung und Verfolgung von Grobblechtafeln auf Basis optischer Sensoren auf der Grobblechstraße der voestalpine Grobblech GmbH

    Tratnig, M., Reisinger, J., Ackerl, R., Hlobil, H., Degelsegger, R., O'Leary, P. & Harker, M., 2006, XXV. Verformungskundliches Kolloquium. p. 19-36

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    First Order Geometric Distance (The Myth of Sampsonus)

    Harker, M. & O'Leary, P., 2006, British Machine Vision Conference 2006. BMVA-Pr., p. 87-96

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Fitting Specific Conics to Scattered Data via Explicit Polynomials

    Harker, M. & O'Leary, P., 2006, International Conference on Signal and Image Processing. MacMillan, p. 489-494

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Instrumentation and Analysis-Methods for the Measurement of Profiles using Light Sectioning

    O'Leary, P., Schalk, P., Ofner, R. & Gfrerrer, A., 2006, IMTC/06 Proceeding of the 23rd IEEE Instrumentation and Measurement Technology Conference. Inst. of Electrical and Electronics Engineers, p. 1108-1113

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Labormessungen zur Erkennung von Schweißnahtfehlern an Vierkantrohren der voestalpine Krems mittels Lichtschnittverfahren

    Schalk, P., O'Leary, P. & Ofner, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  13. Published

    Measuring the Straightness and Cross-Sections of Rolled Seamless-Pipes

    O'Leary, P., Schalk, P., Ofner, R. & Gfrerrer, A., 2006, XXV. Verformungskundliches Kolloquium. p. 37-50

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Messung der Oberflächengeometrie von Knüppelproben für Fa. Rumpler

    Reindl, I. & O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  15. Published

    Metric Tracking of Steel Plates

    Harker, M. & O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Optical Detection of Surface Defects and Cracks

    O'Leary, P., 2006, Optical Detection of Surface Defects and Cracks. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Optical Inspection of Steel Bars for Automatic Grinding of Surface Defects

    Fauster, E., Koller, N., Ofner, R. & O'Leary, P., 2006, XXV.Verformungskundliches Kolloguium. p. 5-17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Optical Servoing for Industrial Surface Machining

    Koller, N., Ofner, R., O'Leary, P. & Fauster, E., 2006, Proceeding of Electronic Imaging, Machine Vision Applications in Industrial Inspection XIV. p. 607001-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Preliminary Investigation of the Measurement of Copper Plates

    O'Leary, P. & Ofner, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Rißdetektion mit thermo-induktiver Methode

    Oswald-Tranta, B., Wally, G. & O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Thermographische Untersuchung an Schmiedeteilen

    Oswald-Tranta, B., Wally, G. & O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Thermoinduktive Drahtinspektion für Oberflächenrisse

    Oswald-Tranta, B., Wally, G. & O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Thermoinduktive Drahtinspektion für Oberflächenrisse 2

    Oswald-Tranta, B., Wally, G. & O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Thermoinduktive Messungen für Saarstahl AG

    Wally, G., Oswald-Tranta, B. & O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Vermessung von geschälten Rundproben für Saarstahl AG

    Reindl, I. & O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. 2005
  27. Published

    Positional and orientational referencing of multiple light sectioning systems for precision profile measurement

    Tratnig, M., Hlobil, H., Reisinger, J. & O'Leary, P., 21 Jul 2005, In: Proceedings of SPIE - The International Society for Optical Engineering. 5679, p. 74-85 12 p., 10.

    Research output: Contribution to journal › Conference article › peer-review

  28. Published

    Berührungsloses Magneto-Thermal Inspektionsverfahren

    O' Leary, P., Oswald-Tranta, B. & Wally, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Computation of Homographies

    Harker, M. & O'Leary, P., 2005, British Machine Vision Conference 2005. BMVA-Pr., p. 310-319

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Computation of Homographies

    Harker, M. & O'Leary, P., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    Detection of Surface Cracks on Steel Wire using Thermo-inductive Method

    Oswald-Tranta, B., Wally, G. & O' Leary, P., 2005, Proceedings of 7th International Conference on Quality Control by Artifical Vision. p. 69-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Development and implementation of non-contact strain and deformation test methods for polymeric materials and components

    Fauster, E., Steinberger, R., Major, Z., O'Leary, P. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  33. Published

    Direct and least square fitting of coupled geometric objects for metric vision

    O' Leary, P., Harker, M. & Zsombor-Murray, P. J., 2005, In: IEE proceedings / Vision, image and signal processing. Volume 152, p. 687-694

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Evaluation and Calibration Methods for the Application of a Video-Extensometer to Tensile Testing of Polymer Materials

    Fauster, E., Schalk, P. & O'Leary, P., 2005, Machine Vision Applications in Industrial Inspection XIII. p. 187-198

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Fast flow measurements in hot pulsating gases with capacitance ultrasonic transducers

    Schröder, A., Kupnik, M., O'Leary, P., Benes, E. & Gröschl, M., 2005, Proceeding 2st Congress of Alps Adria Acoustics Association. p. 375-380

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    First Test of Photometric Stereo for the detection of Open Cracks in Steel Blocks

    O' Leary, P., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  37. Published

    High-temperature video-extensometry for material testing of refractories

    Schalk, P., Fauster, E. & O' Leary, P., 2005, Machine Vision Applications in Industrial Inspection XIII, Electronic Imaging, Science and Technology. p. 129-139

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Incremental Matrix Orthogonalization with an Application to Curve Fitting

    Harker, M., O' Leary, P. & Zsombor-Murray, P. J., 2005, Electronic Imaging Science and Technology: Computational Imaging III. p. 354-361

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Machine Vision for feedback control in a steel rolling mill

    O' Leary, P., 2005, In: Computers in industry. 56, p. 997-1004

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Optische Risserkennung an der Brammenoberfläche

    O' Leary, P. & Reindl, I., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Positional and Orientational Referencing of Multiple Light Sectioning for Precision Profile Measurement

    Tratnig, M., Hlobil, H., Reisinger, J. & O' Leary, P., 2005, Machine Vision Applications in Industrial Inspection XIII, Electronic Imaging, Science and Technology. p. 74-85

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Proben von April 2005

    Reindl, I. & O'Leary, P., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Real Time Cutter Path Generation and Control of a Hydraulically Actuated Tunnelling Robot

    Rath, G., Zsombor-Murray, P. & O'Leary, P., 2005, ISR2005 - 36th International Symposion on Robotics. p. 139-139

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Reconstruction of the Tube Form for VA Tublars

    O' Leary, P., Schalk, P. & Ofner, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  45. Published

    Risserkennung auf Brammen

    Reindl, I. & O'Leary, P., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. Published

    Scaled Images of Cracks on Steel Slabs

    O' Leary, P. & Reindl, I., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Tool Path Generation for 3D Laser Cladding Using Adaptive Slicing Technology

    Kerschbaumer, M., Ernst, G. & O'Leary, P., 2005, Congress Proceeding Laser Materials Processing Conference. p. 310-319

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Versuchsmessungen an "Schieber" der Firma RHI

    Schalk, P., Ofner, R. & O'Leary, P., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. 2004
  50. Published

    Camera calibration, data segmentation, and fitting approaches for a visual edge inspection system

    Tratnig, M., O'Leary, P., Hlobil, H. & Reisinger, J., 1 Dec 2004, In: Proceedings of SPIE - The International Society for Optical Engineering. 5303, p. 42-51 10 p.

    Research output: Contribution to journal › Conference article › peer-review

  51. Published

    Comparison of CMOS and CCD cameras for laser profiling

    Koller, N., O'Leary, P. & Lee, P., 1 Dec 2004, In: Proceedings of SPIE - The International Society for Optical Engineering. 5303, p. 108-115 8 p.

    Research output: Contribution to journal › Conference article › peer-review

  52. Published

    Geometric surface inspection of raw milled steel blocks

    Reindl, I. & O'Leary, P., 1 Dec 2004, In: Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). 3212, p. 849-856 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Panoramic optical-servoing for industrial inspection and repair

    Sallinger, C., O'Leary, P., Retschnig, A. & Kammerhofer, M., 1 Dec 2004, In: Proceedings of SPIE - The International Society for Optical Engineering. 5303, p. 73-80 8 p.

    Research output: Contribution to journal › Conference article › peer-review

Previous 1 2 3 4 5 6 Next
View graph of relations

Latest Research Output

View more (266)