Harald Harmuth

1 - 295 out of 295Page size: 500

Research output

  1. 2025
  2. Published

    Application of coupled CFD-DEM modelling in erosion study of cohesive materials: A case study of rotating finger test

    Rahimilarki, M., Burhanuddin, B., Vollmann, S., Jin, S. & Harmuth, H., 23 Jan 2025, In: Results in Engineering. 25.2025, March, 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2024
  4. Published

    Erosion Behavior of Coarse-Grained Alumina in Corrosive Melts: Experimental and Computational Studies with CAS and CASM Slags

    Guarco, J., Vollmann, S., Harmuth, H. & Burhanuddin, B., 19 Nov 2024.

    Research output: Contribution to conference › Paper › peer-review

  5. Published

    Creep strain recovery of a refractory castable under loading/unloading conditions

    Gruber, D., Akbari, B. & Harmuth, H., 18 Sept 2024, Proceedings of International Colloquium on Refractories: ICR 2024.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Effect of Slag Basicity on Alumina Dissolution and Diffusivity: A High-temperature Confocal Laser Scanning Microscopy Study

    Burhanuddin, B. & Harmuth, H., 15 Jun 2024, In: China's refractories. 33.2024, 2, p. 27-34 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. E-pub ahead of print

    Determining the critical Reynolds number for suppressing Marangoni convection of alumina in silicate melt

    Burhanuddin, B., Harmuth, H. & Vollmann, S., 29 Feb 2024, (E-pub ahead of print) In: Ceramics International : CI. 50.2024, 11 Part A, p. 18323-18328 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    A Modified Rotating-Finger Test Aiming to Quantify Refractory Wear Based on Fundamental Equations Governing Refractory Dissolution and Erosion

    Burhanuddin, B. & Harmuth, H., 6 Feb 2024, Advances in Pyrometallurgy: Furnace Containment. Springer, p. 119-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. 2023
  10. Published

    Analyzing crack deflection behavior of refractories by digital image correlation

    Fruhstorfer, J., Gruber, D. & Harmuth, H., 12 Sept 2023, In: AIP Conference Proceedings. 2894, 1, 020002.

    Research output: Contribution to journal › Conference article › peer-review

  11. Published

    Dissolution of Magnesia in Silicate Melts and Diffusivity Determination from CLSM Studies

    Burhanuddin, B. & Harmuth, H., 21 Jul 2023, In: Applied Sciences : open access journal. 13.2023, 14, p. 8458 8 p., 8458.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Calculation of mass transfer for rotating finger test equipment

    Burhanuddin, B., Harmuth, H. & Guarco, J., 4 Jul 2023.

    Research output: Contribution to conference › Presentation › Research

  13. E-pub ahead of print

    Creep strain recovery of an in situ spinel-forming refractory castable under loading/unloading compressive creep conditions

    Akbari, B., Gruber, D., Jin, S. & Harmuth, H., 17 May 2023, (E-pub ahead of print) In: Ceramics International. 49.2023, 15, p. 25225-25231 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. E-pub ahead of print

    Anisotropy of fracture mechanical properties of carbon-containing refractories and its impact on cracking in a steel ladle lining

    Gruber, D., Schachner, S. & Harmuth, H., 2 May 2023, (E-pub ahead of print) In: Open ceramics. 14.2023, June, 5 p., 100363.

    Research output: Contribution to journal › Article › Research › peer-review

  15. 2022
  16. Published

    Quantification of Magnesia Dissolution in Silicate Melts and Diffusivity Determination Using Rotating Finger Test

    Burhanuddin, B., Harmuth, H. & Vollmann, S., 13 Dec 2022, In: Applied Sciences : open access journal. 12.2022, 24, 13 p., 12791.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Method for inverse calculation of erosion parameters in slag-refractory systems

    Guarco, J., Vollmann, S., Harmuth, H. & Burhanuddin, B., Dec 2022, In: Materials Today Communications. 33.2022, December, 10 p., 104736.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Influence of the Fine Fraction and Sintering on Selected Isotropic and Anisotropic Bulk Properties of Uniaxial Compacts

    Fruhstorfer, J., Wagner, M., Gruber, D. & Harmuth, H., 14 Sept 2022, In: Interceram. 71.2022, September, p. 38-47 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. E-pub ahead of print

    Zirconium oxycarbides and oxycarbonitrides: A review

    Kucheryavaya, A., Lenčéš, Z., Šajgalík, P. & Harmuth, H., 30 Aug 2022, (E-pub ahead of print) In: International journal of applied ceramic technology. 20.2023, 2, p. 541-562 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. E-pub ahead of print

    Sherwood correlation for finger-test experiments

    Guarco, J., Burhanuddin, Vollmann, S. & Harmuth, H., 27 Aug 2022, (E-pub ahead of print) In: Results in Engineering. 15.2022, September, 5 p., 100610.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Creep characterization and modelling of ordinary refractory ceramics under combined compression and shear loading conditions

    Schachner, S., Jin, S., Gruber, D. & Harmuth, H., 1 Aug 2022, In: Ceramics International. 48.2022, 15, p. 21101-21109 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Mixed-mode fracture behaviour of refractories with asymmetric wedge splitting test: Part II: Experimental case study

    Dai, Y. J., Jin, S., Zhou, R., Li, Y. W., Harmuth, H. & Tschegg, E. K., 15 Jul 2022, In: Ceramics International. 48.2022, 14, p. 19757-19766 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Mixed-mode fracture behaviour of refractories with asymmetric wedge splitting test: Part I: Numerical implementation and validation

    Dai, Y., Jin, S., Li, Y. W., Wang, Q., Zhou, W. & Harmuth, H., 15 Jul 2022, In: Ceramics International. 48.2022, 14, p. 19767-19775 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Corrigendum to “Asymmetric creep modeling of common refractory ceramics with high temperature wedge splitting test” [Eng. Fract. Mech. 25 (2021) 107819

    Jin, S. & Harmuth, H., Jul 2022, 1 p.

    Research output: Other contribution › Research

  25. Published

    Contributions to Crack Propagation in Coarse Grained Refractories

    Gruber, D. & Harmuth, H., 22 Jun 2022.

    Research output: Contribution to conference › Presentation › Research

  26. Published

    Discrete element modelling of ordinary refractory ceramics under cold crushing testing: Influence of minimum element size

    Du, W., Jin, S., Emam, S., Gruber, D. & Harmuth, H., 15 Jun 2022, In: Ceramics International. 48.2022, 12, p. 17934-17941 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Evaluation of CLSM measurements for dissolution studies: A case study investigating alumina dissolution in a silicate slag

    Harmuth, H. & Burhanuddin, B., 14 Jun 2022, In: Ceramics International. 48.2022, 19 Part A, p. 28174-28180 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Method for determination of mass transfer coefficients for dissolution of dense ceramics in liquid slags

    Guarco, J., Harmuth, H. & Vollmann, S., 1 May 2022, In: International journal of heat and mass transfer. 186.2022, 1 May, 11 p., 122494.

    Research output: Contribution to journal › Article › Research › peer-review

  29. E-pub ahead of print

    Thermomechanical finite element modeling of steel ladle containing alumina spinel refractory lining

    Samadi, S., Jin, S., Gruber, D. & Harmuth, H., 1 Apr 2022, (E-pub ahead of print) In: Finite elements in analysis and design. 206.2022, 1 September, 10 p., 103762.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Method for determination of effective binary diffusivities in dissolution of dense ceramic materials

    Guarco, J., Burhanuddin, B., Vollmann, S. & Harmuth, H., 15 Mar 2022, In: Ceramics International.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Application of an improved testing device for the study of alumina dissolution in silicate slag

    Burhanuddin, B., Guarco, J., Harmuth, H. & Vollmann, S., 2 Mar 2022, In: Journal of the European Ceramic Society. 42.2022, 8, p. 3652-3659 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Investigation of three-stage compressive creep of a spinel forming refractory castable containing 8% MgO

    Akbari, B., Gruber, D., Jin, S. & Harmuth, H., 1 Feb 2022, In: Ceramics International : CI. 48.2022, 3, p. 3287-3292 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Significance of an inclined plane test for mould slag assessment

    Marschall, I., Harmuth, H. & Kircher, V., Jan 2022, In: Metallurgia Italiana. 2022, 1, p. 14-22 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Application of Artificial Neural Network to Predict the Thermal and Thermomechanical Behavior of Refractory Linings

    Hou, A., Jin, S., Gruber, D. & Harmuth, H., 2022, 2022 International Joint Conference on Neural Networks, IJCNN 2022 - Proceedings. Institute of Electrical and Electronics Engineers, (Proceedings of the International Joint Conference on Neural Networks; vol. 2022-July).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    DETERMINATION OF SECONDARY CREEP STAGE PARAMETERS OF SHAPED ALUMINA SPINEL REFRACTORY WITH AID OF GENETIC ALGORITHM

    Samadi, S., Jin, S., Gruber, D. & Harmuth, H., 2022.

    Research output: Contribution to conference › Paper › peer-review

  36. 2021
  37. Published

    Significance of an inclined plane test for mould slag assessment

    Marschall, I., Harmuth, H. & Kircher, V., 20 Oct 2021, Proceedings of the 10th European Conference on Continuous Casting. Mailand: Associazione Italiana di Metallurgia, 9 p. CC_017

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Significance of an inclined plane test for mould slag assessment

    Marschall, I. & Harmuth, H., 20 Oct 2021.

    Research output: Contribution to conference › Presentation › Research

  39. Published

    Application of liquid-liquid mass transfer for a steel ladle

    Doletschek, M., Vollmann, S. & Harmuth, H., 6 Oct 2021, STEELSIM 2021, 9th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking-STEELSIM2021. p. 8 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Combined damaged elasticity and creep modeling of ceramics with wedge splitting tests

    Samadi, S., Jin, S. & Harmuth, H., 15 Sept 2021, In: Ceramics International. 47.2021, 18, p. 25846-25853 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Phase formation in MgO-C refractories with different antioxidants

    Atzenhofer, C. & Harmuth, H., 27 Aug 2021, In: Journal of the European Ceramic Society. 41.2021, 14, p. 7330-7338 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Asymmetric creep modeling of common refractory ceramics with high temperature wedge splitting test

    Jin, S. & Harmuth, H., Jul 2021, In: Engineering Fracture Mechanics. 252.2021, July, 12 p., 107819.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Investigation of calcium-aluminate-based mold flux of different compositions

    Marschall, I. & Harmuth, H., 10 Jun 2021, In: Steel research international. 93.2022, 3, 8 p., 2100187.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    A comparison of two damage models for inverse identification of mode I fracture parameters: Case study of a refractory ceramic

    Samadi, S., Jin, S., Gruber, D. & Harmuth, H., 1 May 2021, In: International Journal of Mechanical Sciences. 197, 1 May, 9 p., 106345.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Design, operation and evaluation of an improved refractory wear testing technique

    Kircher, V., Burhanuddin & Harmuth, H., 17 Apr 2021, In: Measurement. 178.2021, June, 9 p., 109429.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Investigation of Calcium Aluminate based Mold Slag Compositions

    Harmuth, H. & Marschall, I., 21 Feb 2021.

    Research output: Contribution to conference › Presentation › Research

  47. 2020
  48. Published

    Creep Parameter Determination of a Shaped Alumina Spinel Refractory Using Statistical Analysis

    Samadi, S., Teixeira, L., Jin, S., Gruber, D. & Harmuth, H., Sept 2020.

    Research output: Contribution to conference › Paper

  49. E-pub ahead of print

    R-curves determination of ordinary refractory ceramics assisted by digital image correlation method

    Dai, Y., Harmuth, H., Jin, S., Gruber, D. & Yawei, L., 20 May 2020, (E-pub ahead of print) In: Journal of the European Ceramic Society. 40.2020, 13, p. 4655-4663 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Statistical study of compressive creep parameters of an alumina spinel refractory

    Samadi, S., Jin, S., Gruber, D., Harmuth, H. & Schachner, S., 1 Mar 2020, In: Ceramics International : CI. 46.2020, 10A, p. 14662-14668 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Mechanical and fracture investigation of magnesia refractories with acoustic emission-based method

    Dai, Y., Yawei, L., Jin, S., Harmuth, H., Yan, W. & Xu, X., Jan 2020, In: Journal of the European Ceramic Society. 40.2020, 1, p. 181-191 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. 2019
  53. Published

    Fracture behaviour of magnesia refractory materials in tension with the Brazilian test

    Dai, Y., Li, Y., Xu, X., zhu, Q., Yan, W., Jin, S. & Harmuth, H., Dec 2019, In: Journal of the European Ceramic Society. 39.2019, 16, p. 5433-5441 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Thermomechanical Analysis of Purging Plugs by Applying Fluid–Solid Conjugate Heat Transfer Modeling

    Tan, F., He, Z., Jin, S., Cai, H., Li, B., Li, Y. & Harmuth, H., 1 Nov 2019, In: Steel research international. 90.2019, 11, 9 p., 1900213.

    Research output: Contribution to journal › Article › Research › peer-review

  55. E-pub ahead of print

    Fracture behavior of magnesia refractory materials under combined cyclic thermal shock and mechanical loading conditions

    Dai, Y., Li, Y., Jin, S., Harmuth, H. & Xu, X., 17 Oct 2019, (E-pub ahead of print) In: Journal of the American Ceramic Society. 103.2020, 3, p. 1956-1969 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    A method for steel ladle lining optimization applying thermomechanical modelling and Taguchi approaches

    Jin, S., Hou, A., Harmuth, H. & Gruber, D., 16 Oct 2019, Proceedings of UNITECR 2019: 16th Biennial Worldwide Congress. Yokohama, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Contributions to refractories creep characterisation

    Gruber, D., Jin, S., Schachner, S., Stückelschweiger, M. & Harmuth, H., 16 Oct 2019, Proceedings of UNITECR'19. Yokohama, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Contributions to refractories creep characterisation

    Gruber, D., Jin, S., Schachner, S., Stückelschweiger, M. & Harmuth, H., 16 Oct 2019.

    Research output: Contribution to conference › Presentation › Research

  59. Published

    TOWARDS THE PREDICTION OF REFRACTORY EROSION BY LIQUID SLAGS AND METAL

    Leitold, C., Harmuth, H. & Vollmann, S., 26 Sept 2019, Supplier Industries enabling REFRACTORIES. p. 163-166 194 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Wedge-Splitting Test on Carbon-Containing Refractories at High Temperatures

    Stückelschweiger, M., Gruber, D., Jin, S. & Harmuth, H., 8 Aug 2019, In: Applied Sciences : open access journal. 9.2019, 16, 10 p., 3249.

    Research output: Contribution to journal › Article › Research › peer-review

  61. E-pub ahead of print

    Automated break temperature determination of mould slags for the continuous casting of steel based on temperature-dependent viscosity data

    Kölbl, N. & Harmuth, H., 25 Jul 2019, (E-pub ahead of print) In: Ironmaking and steelmaking. 47.2019, 8, p. 899-902 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Influence of Variation/Response Space Complexity and Variable Completeness on BP-ANN Model Establishment: Case Study of Steel Ladle Lining

    Hou, A., Jin, S., Gruber, D. & Harmuth, H., 16 Jul 2019, In: Applied Sciences : open access journal. 9.2019, 14, 12 p., 2835.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Modelling of a steel ladle and prediction of its thermomechanical behavior by finite element simulation together with artificial neural network approaches

    Hou, A., Jin, S., Gruber, D. & Harmuth, H., 4 Jul 2019, p. 1109 - 1116. 7 p.

    Research output: Contribution to conference › Paper

  64. Published

    A method to characterize asymmetrical three-stage creep of ordinary refractory ceramics and its application for numerical modelling

    Schachner, S., Jin, S., Gruber, D. & Harmuth, H., 6 Jun 2019, In: Journal of the European Ceramic Society. 39.2019, 14, p. 4384-4393 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Thermal and Thermomechanical Responses Prediction of a Steel Ladle Using a Back-Propagation Artificial Neural Network Combining Multiple Orthogonal Arrays

    Hou, A., Jin, S., Harmuth, H. & Gruber, D., 29 Apr 2019, In: Steel research international. 2019, 8 p., 1900116.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Creep testing of carbon containing refractories under reducing conditions

    Stückelschweiger, M., Gruber, D., Jin, S. & Harmuth, H., 4 Feb 2019, In: Ceramics International : CI. 45.2019, 8, p. 9776-9781 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    High-temperature investigation of mould slag crystallization by single and double hot thermocouple techniques

    Kölbl, N., Marschall, I. & Harmuth, H., 2019, In: Journal of iron and steel research international. 26.2019, 4, p. 345-354 9 p.

    Research output: Contribution to journal › Review article › peer-review

  68. Published

    Identification of secondary raw materials in mold powders and their melting behavior

    Marschall, I., Kölbl, N., Harmuth, H. & Atzenhofer, C., 2019, In: Journal of iron and steel research international. 26.2019, 4, p. 403-411 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Keramikfunde: Belege für den Beginn und die Entwicklung der Besiedelung im Bezirk Liezen

    Presslinger, H., Eibner, C., Harmuth, H. & Atzenhofer, C., 2019, In: Da schau her. 2019, 1, p. 16-20 5 p.

    Research output: Contribution to journal › Article › Research

  70. Published

    Naturwissenschaftliche Untersuchungsergebnisse der Klaubproben vom mittelbronzezeitlichen Kupfererzverhüttungsplatz Greithbauer/KG Trieben/OG Trieben

    Presslinger, H., Eibner, C., Harmuth, H. & Atzenhofer, C., 2019, In: Da schau her. 40.2019, 3, p. 18-21 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. 2018
  72. Published

    Effect of the phase transformation on fracture behaviour of fused silica refractories

    Dai, Y., Yin, Y., Xu, X., Jin, S., Li, Y. & Harmuth, H., 1 Dec 2018, In: Journal of the European Ceramic Society. 38, 16, p. 5601-5609 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Three stage creep behavior of MgO containing ordinary refractories in tension and compression

    Schachner, S., Jin, S., Gruber, D. & Harmuth, H., 13 Sept 2018, In: Ceramics International : CI.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    A Method for Steel Ladle Lining Optimization Applying Thermomechanical Modeling and Taguchi Approaches

    Hou, A., Jin, S., Harmuth, H. & Gruber, D., 9 Aug 2018, In: JOM. 70, 11, p. 2449 2456 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Thermomechanical modelling of a torpedo car by considering working lining spalling

    Jin, S., Harmuth, H., Gruber, D., Buhr, A., Sinnema, S. & Rebouillat, L., 17 Jul 2018, In: Ironmaking and steelmaking. 0301-9233, 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Modified DHTT Equipment for Crystallization Studies of Mold Slags

    Kölbl, N., Harmuth, H. & Marschall, I., 9 Apr 2018, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 2018, 49/4, p. 1898-1909 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    De-agglomeration rate of silicate bonded sand cores during core removal

    Stauder, B., Harmuth, H. & Schumacher, P., Feb 2018, In: Journal of materials processing technology. 252 (2018), 252, p. 652-658 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Advanced creep testing of refractories providing new insight into material behaviour

    Jin, S., Harmuth, H., Gruber, D., Schachner, S., Meunier, P. & Techer, R., 2018, In: Refractories worldforum. 10, 2, p. 63-67

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Advanced measures to characterize mechanical properties of refractories

    Jin, S., Harmuth, H., Gruber, D. & Sidi Mammar, A., 2018, In: China's refractories. 27, 1, p. 8-13

    Research output: Contribution to journal › Article › Research

  80. Published

    An improved Double Hot Thermocouple Technique for Mold Slag Investigation

    Kölbl, N., Marschall, I. & Harmuth, H., 2018, AISTech 2018: Proceedings of the Iron & Steel Technology Conference : 7-10 May 2018, Philadelphia, Pa., U.S.A..

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    APPLICATION OF A MODIFIED DOUBLE HOT THERMOCOUPLE TECHNIQUE FOR MOLD SLAGS

    Kölbl, N., Marschall, I., Kircher, V. & Harmuth, H., 2018, Proceedings of the 7th international congress on science and technology of steelmaking. Associazione Italiana di Metallurgia

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Investigation of Compressive Refractory Creep

    Jin, S. & Harmuth, H., 2018, In: China's refractories. 27, 3, p. 21-27 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Keramik aus der Franz-Josephs-Grotte in Unterzeiring: die naturwissenschaftliche Bewertung eines bronzezeitlichen Keramikwerkstoffes

    Preßlinger, H., Eibner, C., Harmuth, H. & Atzenhofer, C., 2018, In: Da schau her. 2018, 3, p. 16-18 3 p.

    Research output: Contribution to journal › Article › Research

  84. Published

    Thermal and thermomechanical evaluations of channel induction furnace applying strong insulation containing lightweight aggregate

    Jin, S., Harmuth, H. & Gruber, D., 2018, In: Ironmaking and steelmaking. 2018, 45, p. 514-518 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. 2017
  86. Published

    Determination of the fracture behaviour of MgO-refractories using multi-cycle wedge splitting test and digital image correlation

    Dai, Y., Gruber, D. & Harmuth, H., Dec 2017, In: Journal of the European Ceramic Society. 37.2017, 15, p. 5035-5043 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Fracture process zone development in a magnesia and a magnesia spinel refractory as observed by digital image correlation

    Gruber, D., Dai, Y. & Harmuth, H., 26 Sept 2017, Proceedings of UNITECR 2017: 26.9.2017-29.9.2017, Santiago de Chile, Chile. Santiago de Chile

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Modelling and inverse investigation of the fracture process for a magnesia spinel refractory using a heterogeneous continuum model

    Dai, Y., Gruber, D., Harmuth, H. & Jin, S., Sept 2017, In: Engineering Fracture Mechanics. 182.2017, September, p. 438-448 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Observation and quantification of the fracture process zone for two magnesia refractories with different brittleness

    Dai, Y., Gruber, D. & Harmuth, H., 1 Jun 2017, In: Journal of the European Ceramic Society. 37.2017, 6, p. 2521-2529 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Fracture behaviour and microstructure of refractory materials for steel ladle purging plugs in the system Al2O3-MgO-CaO

    Long, B., Xu, G., Buhr, A., Jin, S. & Harmuth, H., 26 Apr 2017, In: Ceramics International : CI. 43.2017, 13, p. 9679-9685 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Comparison of Cement- and Hydratable Alumina-Bonded Alumina-Spinel Materials for Steel Ladle Purging Plugs

    Long, B., Buhr, A., Jung, I.-H., Jin, S., Harmuth, H. & Dutton, J., 2017, In: Refractories worldforum. 9, 3, p. 93-106 14 p.

    Research output: Contribution to journal › Article › Research

  92. Published

    Composition and properties of a metakaolin-based geopolymer binder suitable for shaping using a slinger

    Harmuth, H. & Mairitsch, E., 2017, Construction and Building Materials. p. 277-283

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  93. Published

    Main wear mechanisms of SEN slag band materials

    Harmuth, H., Kircher, V. & Kölbl, N., 2017, In: China's refractories. 26.2017, 1, p. 1-7 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Phase formation in Al2O3-C refractories with Al addition

    Atzenhofer, C., Gschiel, S. & Harmuth, H., 2017, In: Journal of the European Ceramic Society. 37.2017, 4, p. 1805-1810 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Towards industrial vessel refractories lining design: a case study

    Jin, S., Harmuth, H. & Gruber, D., 2017.

    Research output: Contribution to conference › Paper

  96. 2016
  97. Published

    Assessment of thermal shock resistance by HMOR test with high heating rate

    Gruber, D., Sidi Mammar, A., Harmuth, H. & Grasset-Bourdel, R., 28 Sept 2016, 59th International Colloquium on Refractories - Refractories for Metallurgy. Aachen

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Advanced Measures to Characterize the Mechanical Properties of Refracrories

    Jin, S., Harmuth, H., Gruber, D. & Sidi Mammar, A., 20 Sept 2016, Proceedings of the 7th International Symposium on Refractories ISR 2016, Xi'an, China, September 20-22, 2016. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    Main Wear Mechanisms of SEN Slag Band Materials

    Harmuth, H., Kircher, V. & Kölbl, N., 20 Sept 2016, Proc. 7th International Conference on Refractories ISR 2016, Xi'an, China, September 20-22. p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Stability of Magnesia bricks under the conditions of steel degassing – a case study

    Harmuth, H., 18 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  101. Published

    Fundamental investigations for the design of fluorine free mold powder compositions

    Marschall, I., Yang, X. & Harmuth, H., 22 May 2016, Advances in Molten Slags, Fluxes, and Salts: Proceedings of the 10th International Conference on Molten Slags, Fluxes and Salts. Reddy, R. G., Chaubal, P., Pistorius, P. C. & Pal, U. (eds.). Seattle Washington USA, p. 299 306 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Enhanced mechanical performance of Al2O3-C refractories with nano carbon black and in-situ formed multi-walled carbon nanotubes (MWCNTs)

    Liao, N., Li, Y., Jin, S., Sang, S. & Harmuth, H., 1 Feb 2016, In: Journal of the European Ceramic Society. 36.2016, 3, p. 867-874 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  103. E-pub ahead of print

    Thermomechanical failure modeling and investigation into lining optimization for a Ruhrstahl Heraeus snorkel

    Jin, S., Gruber, D., Harmuth, H. & Rössler, R., 28 Jan 2016, (E-pub ahead of print) In: Engineering Failure Analysis. 62.2016, April, p. 254-262 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Tensile creep measurements of ordinary ceramic refractories at service related loads including setup, creep law, testing and evaluation procedures

    Sidi Mammar, A., Gruber, D., Harmuth, H. & Jin, S., 14 Jan 2016, In: Ceramics International : CI. 42.2016, 1 May, p. 6791-6799 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  105. 2015
  106. Published

    Simulation of micro-crack formation in a magnesia spinel refractory during the production process

    Fasching, C., Gruber, D. & Harmuth, H., 25 Aug 2015, In: Journal of the European Ceramic Society. 35, p. 4593-4601 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  107. Published

    Influence of creep on the thermomechanical behavior of a rh-snorkel

    Jin, S., Harmuth, H., Gruber, D. & Rössler, R., 1 Jan 2015.

    Research output: Contribution to conference › Paper › peer-review

  108. Published

    Assessment of thermal shock resistance by hmor test with high heating rate

    Sidi Mammar, A., Harmuth, H., Gruber, D. & Grasset-Bourdel, R., 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  109. Published

    Assessment of thermal shock resistance by HMOR test with high heating rate

    Sidi Mammar, A., Harmuth, H., Gruber, D. & Grasset-Bourdel, R., 2015, UNITECR 2015. Wien, 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  110. Published

    Creep Modeling of Magnesia-chromite Bricks in a RH Snorkel During a Process Cycle

    Jin, S., Harmuth, H., Gruber, D. & Roessler, R., 2015, In: China's refractories. 24, 1, p. 22-25

    Research output: Contribution to journal › Article › Research › peer-review

  111. Published

    Firing research for refractories in steel ladle applications

    Parr, C., Harmuth, H., Pandolfelli, V., Poirrier, J., Rigaud, M. & Sinnema, S., 2015, UNITECR 2015. 14th Biennial Worldwide Congress (ed.). Wien, 5 p. 239

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  112. Published

    Growth and shrinkage of particles in slags

    Gamsjäger, E., Kircher, V. & Harmuth, H. (Co-editor), 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  113. Published

    HIGH TEMPERATURE MICROSCOPIC INVESTIGATIONS IN THE FIELD OF CERAMICS – AN OVERVIEW

    Kircher, V., Kölbl, N., Marschall, I. & Harmuth, H., 2015, Mitteilungen der Österreichischen Mineralogischen Gesellschaft. Ö. M. G. (ed.). Wien: Eigenverlag, Vol. 161. p. 59 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  114. Published

    INFLUENCE OF CREEP ON THE THERMOMECHANICAL BEHAVIOR OF A RH-SNORKEL

    Jin, S., Harmuth, H. (Co-editor), Gruber, D. (Co-editor) & Roessler, R. (Co-editor), 2015, UNITERC 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  115. Published

    Influence of specimen shape and the specimen/pressure plate interface on the cold crushing strength

    Gruber, D., Harmuth, H., Urbanek, G. & Sharma, V., 2015, UNITECR 2015. 14th Biennial Worldwide Congress (ed.). Wien, 5 p. 96

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  116. Published

    In situ observation of slag crystallization

    Kölbl, N., Harmuth, H. & Kircher, V., 2015, Mitteilungen der Österreichischen Mineralogischen Gesellschaft. Österreichische Mineralogische Gesellschaft (ed.). Wien: Eigenverlag, Vol. 161. p. 64 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  117. Published

    Interaction steel/slag/submerged entry nozzle and its impact on refractory wear - thermochemical process simulation

    Harmuth, H. & Xia, G., 2015, In: ISIJ international. 55, 4, p. 775-780 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  118. Published

    Investigation of Magnesia Chromite Brick Wear Phenomena - Post Mortem Analysis From a Lead Recycling Furnace

    Gregurek, D., Majcenovic, C., Reinharter, K., Reiter, V., Wenzl, C., Spanring, A. & Harmuth, H., 2015, In: RHI bulletin : the journal of refractory innovations. 2/2015, p. 24-28 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  119. Published

    Investigation of refractories for the bottom casting of special steel grades / Untersuchung von Feuerfeststoffen für den steigenden Guss von Spezialstählen

    Auer, T., Harmuth, H. & Löcker, C., 2015. 1 p.

    Research output: Contribution to conference › Paper › peer-review

  120. Published

    Nonoxides in ordinary refractory ceramics - phases, compositions and analysis

    Atzenhofer, C., Gschiel, S. & Harmuth, H., 2015, Mitteilungen der Österreichischen Mineralogischen Gesellschaft. Österreichische Mineralogische Gesellschaft (ed.). Wien: Eigenverlag, Vol. 161. p. 17 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  121. Published

    Phase formation in mould powders and mould slags during service

    Marschall, I. & Harmuth, H., 2015, Mitteilung der Österreichischen Mineralogischen Gesellschaft. Österreichische Mineralogische Gesellschaft (ed.). Wien: Eigenverlag, Vol. 161. p. 83 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  122. Published

    Phase formation in mould powders and mould slags during service

    Marschall, I. & Harmuth, H., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  123. Published

    Premature wear in the hearth of a blast furnance and its diminution by the application of titanium dioxide

    Fünders, D., Harmuth, H. & Pötschke, J., 2015, UNITECR 2015. 14th Biennial Worldwide Congress (ed.). Wien, 3 p. 62

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  124. Published

    TENSILE AND COMPRESSIVE CREEP TESTING OF REFRACTORIES AT SERVICE RELATED LOADS

    Sidi Mammar, A., Jin, S., Harmuth, H. & Gruber, D., 2015, UNITERC 2015. 14th Biennial Worldwide Congress (ed.). 1 p. 186

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  125. Published

    Toward CFD Modeling of Slag Entertainment in Gas Stirred Ladles

    Huang, A., Harmuth, H., Doletschek, M., Vollmann, S. & Feng, X., 2015, In: Steel research international. 86, 12, p. 1447-1454 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  126. Published

    Wear of magnesia bricks in the permanent lining of a ladle tank degassing unit

    Harmuth, H., Auer, T. & Bertignol, M., 2015, UNITECR 2015. 14th Biennial Worldwide Congress (ed.). Wien, 3 p. 90

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  127. 2014
  128. Published

    Change of mold slag composition during slab casting of steel with high Al content

    Harmuth, H. & Xia, G., 24 Oct 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, 11, p. 447-453

    Research output: Contribution to journal › Article › Research

  129. Published

    Thermomechanical behavior of steel ladle linings and the influence of insulations

    Gruber, D. & Harmuth, H., 1 Apr 2014, In: Steel research international. 85, 4, p. 512-518 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  130. Published

    A laser irradiation disc test for fracture testing of refractory fine ceramics

    Gruber, D. & Harmuth, H., 2014, In: Journal of the European Ceramic Society. 34, p. 4021-4029

    Research output: Contribution to journal › Article › Research › peer-review

  131. Published

    Change of mold slag composition during slab casting of steel with high Al content

    Harmuth, H. & Xia, G., 2014, 8th European Continuous Casting Conference. p. 952-961

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  132. Published

    Compressive creep testing of refractories at elevated loads-Device, material law and evaluation techniques

    Jin, S., Harmuth, H. & Gruber, D., 2014, In: Journal of the European Ceramic Society. 34, p. 4037-4042

    Research output: Contribution to journal › Article › Research › peer-review

  133. Published

    Creep testing of refractories at service related load levels and application for material simulation

    Jin, S., Harmuth, H. & Gruber, D., 2014, Advances in Science and Technology. p. 221-225

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  134. Published

    Determination of Young's modulus, fracture energy and tensile strength of refractories by inverse estimation of a wedge splitting procedure

    Jin, S., Gruber, D. & Harmuth, H., 2014, In: Engineering Fracture Mechanics. 116, p. 228-236

    Research output: Contribution to journal › Article › Research › peer-review

  135. Published

    Fractographic and Fracture Mechanical Invstigations of Refractories under Different Loading Conditions

    Harmuth, H. & Tschegg, E. K., 2014, In: China's refractories. 23, p. 19-23

    Research output: Contribution to journal › Article › Research › peer-review

  136. Published

    Impact of an increase of Al2O3, TiO2 and ZrO2 on mold slag properties

    Kircher, V., Marschall, I., Kölbl, N. & Harmuth, H., 2014, Proceedings - 8th European Continuous Casting Conference. p. 1050-1059

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  137. Published

    Mathematical Modelling of Slag Entrainment in a Gas Stirred Ladle by LES

    Huang, A., Vollmann, S. & Harmuth, H., 2014, 10th India International Refractories Congress - IREFCON14. p. 200-203

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  138. Published

    Optimisation of monolithic lining concepts of channel induction furnace

    Jin, S., Gruber, D., Harmuth, H., Soudier, J., Meunier, P. & lemaistre, H., 2014, In: International journal of cast metals research. 27, 6, p. 336 - 340

    Research output: Contribution to journal › Article › Research › peer-review

  139. Published

    Refractory Corrosion by Dissolution in Slags - Challenges and Trends of Present Fundamental Research

    Harmuth, H. & Vollmann, S., 2014, In: Iron & [and] steel review. 58, 4, p. 157 - 170

    Research output: Contribution to journal › Article › Research › peer-review

  140. Published

    Simulation of refractory fracture as a tool for advanced material testing

    Harmuth, H., Gruber, D. & Jin, S., 2014, Advances in Science and Technology . Vol. 92. p. 232-241

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  141. Published

    Steel ladle linings – key issues regarding thermomechanical behaviour

    Gruber, D. & Harmuth, H., 2014, In: RHI bulletin : the journal of refractory innovations. p. 19-23

    Research output: Contribution to journal › Article › Research › peer-review

  142. Published

    Thermochemical wear of refractory linings associated to gas firing in metallurgical plants

    Rieger, J., Drozd-Rys, M., Weiß, C. & Harmuth, H., 2014, In: Steel research international. 85, p. 527-536

    Research output: Contribution to journal › Article › Research › peer-review

  143. Published

    Thermomechanical Behaviour of Steel Ladle Linings and the Influence of Insulations

    Gruber, D. & Harmuth, H., 2014, In: Steel research international. 85, p. 512-518

    Research output: Contribution to journal › Article › Research › peer-review

  144. 2013
  145. Published

    The mechanical fracture characterization of non-linear flexible ceramics using digital image correlation

    Belrhiti, Y., Pop, I. O., Doumalin, P., Dupre, J. C., Auer, T., Gruber, D., Harmuth, H., Huger, M. & Chotard, T., 1 Jan 2013, p. 3587-3595. 9 p.

    Research output: Contribution to conference › Paper › peer-review

  146. Published

    A Glance on Turbulence Modelling in Simulating Bubble Stirred Ladle Flow

    Pirker, S., König, B., Puttinger, S., Doletschek, M. & Harmuth, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 472-474

    Research output: Contribution to journal › Article › Research › peer-review

  147. Published

    Investigation of Continuous Casting Slag Films Sampled on Site and Comparison with Laboratory Results

    Marschall, I., Kölbl, N., Harmuth, H. & Xia, G., 2013, In: Journal for manufacturing science & production. 13, p. 103-114

    Research output: Contribution to journal › Article › Research › peer-review

  148. Published

    Main Mechanisms of SEN Slag Band Corrosion as Observed by Post Mortem Investigations

    Harmuth, H., Kircher, V., Kölbl, N., Antczak, M. & Xia, G., 2013, Proceedings of the Unified International Technical Conference on Refractories: UNITECR 2013. p. 000730-000735

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  149. Published

    Marangoni Convection as a Contribution to Refractory Corrosion - CFD Simulation and Analytical Approaches

    Vollmann, S. & Harmuth, H., 2013, Marangoni Convection as a Contribution to Refractory Corrosion - CFD Simulation and Analytical Approaches. p. 000781-000786

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  150. Published

    Simulation of the steel ladle preheating process

    Drozd-Rys, M., Harmuth, H. & Rössler, R., 2013, Simulation of the steel ladle preheating process. p. 764-769

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  151. Published

    Tensile behaviour of magnesia-spinel refractories: Comparison of tensile and wedge splitting tests

    Grasset-Bourdel, R., Alzina, A., Huger, M., Chotard, T., Obenaus-Emler, R., Gruber, D. & Harmuth, H., 2013, In: Journal of the European Ceramic Society. 33, p. 913-923

    Research output: Contribution to journal › Article › Research › peer-review

  152. Published

    Thermochemischer Angriff von Rauchgaskomponenten auf die Feuerfestausmauerung und den Stahlmantel metallurgischer Anlagen

    Rieger, J., Drozd-Rys, M., Weiß, C. & Harmuth, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 466-467

    Research output: Contribution to journal › Article › Research › peer-review

  153. Published

    Thermomechanical Behaviour of Steel Ladle Linings and the Influence of Insulations

    Gruber, D. & Harmuth, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 470-471

    Research output: Contribution to journal › Article › Research › peer-review

  154. Published

    The Role of Turbulence Modelling in Picturing Gas Stirred Steel Ladle Flow

    Doletschek, M., Pirker, S. & Harmuth, H., 2013, The Role of Turbulence Modelling in Picturing Gas Stirred Steel Ladle Flow. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  155. Published

    Towards Modelling of Slag Entrainment in Gas Stirred Ladles by LES

    Huang, A., Vollmann, S. & Harmuth, H., 2013, Towards Modelling of Slag Entrainment in Gas Stirred Ladles by LES. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  156. 2012
  157. Published

    CFD Simulation of Mass Transfer Coefficients Relevant for Refractory Wear

    Vollmann, S. & Harmuth, H., 2012, In: Interceram / Refractories manual. p. 19-21

    Research output: Contribution to journal › Article › Research › peer-review

  158. Published

    Comparison of High Temperature Methods for the Investigation of Melting and Crystallisation Behaviour of Mould Powders

    Kölbl, N., Marschall, I., Harmuth, H., Buchberger, B. & Reiter, J., 2012, FRAY INTERNATIONAL SYMPOSIUM. p. 381-394

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  159. Published

    Corrosion mechanisms of SEN slagband materials

    Harmuth, H., Kölbl, N., Rollinger, B. & Xia, G., 2012, Proceedings of the 6th international symposium on refractories. p. 477-480

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  160. Published

    For an Educational and Industrial Partnership in a Coopetitive World: FIRE

    Rigaud, M., Zhou, N. & Harmuth, H., 2012, Proceedings of the 6th international symposium on refractories. p. 61-63

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  161. Published

    Fractographic and fracture mechanical investigations of refractories under different loading conditions

    Harmuth, H. & Tschegg, E. K., 2012, Proceedings of the 6th international symposium on refractories. p. 485-488

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  162. Published

    Influence of thermal damage occurrence at microstructural scale on the thermomechanical behaviour of magnesia-spinel refractories

    Grasset-Bourdel, R., Alzina, A., Huger, M., Chotard, T., Gruber, D. & Harmuth, H., 2012, In: Journal of the European Ceramic Society. 32, p. 989-999

    Research output: Contribution to journal › Article › Research › peer-review

  163. Published

    Investigation of continuous casting slag films sampled on site and comparison with laboratory results

    Marschall, I., Kölbl, N., Harmuth, H. & Xia, G., 2012, Ninth International Conference on Molten Slags, Fluxes and Salts (Molten 12). p. 1-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  164. Published

    Investigation of MgALON formation under different conditions and refractory application

    Gschiel, S., Harmuth, H., Lences, Z., Sajgalik, P. & Ye, G., 2012, Proceedings of the 6th international symposium on refractories. p. 489-492

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  165. Published

    Microstructure of solidified mold slag and comparison with laboratory specimens

    Marschall, I., Kölbl, N., Harmuth, H. & Xia, G., 2012, Fray International Symposium. Vol. 2. p. 213-224

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  166. Published

    Preliminary investigations of the production of MgAlON bonded refractories

    Pichlbauer, S., Harmuth, H., Lenčéš, Z. & Šajgalîk, P., 2012, In: Journal of the European Ceramic Society. 32, 9, p. 2013-2018

    Research output: Contribution to journal › Article › Research › peer-review

  167. Published

    Production of MgAlON Bonded Alumina Refractories

    Gschiel, S., Harmuth, H., Lenčéš, Z. & Šajgalîk, P., 2012, In: Interceram / Refractories manual. 1, p. 48-51

    Research output: Contribution to journal › Article › Research › peer-review

  168. Published

    SIMULATION OF MOULDING – INFLUENCING FACTORS AND RESULTS FOR COLLECTOR NOZZLES

    Gruber, D., Harmuth, H. & Michelitsch, A., 2012, Proceedings of International Colloquium on Refractories . p. 112-115

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  169. Published

    Thermomechanical Modelling of a Channel Induction Furnace

    Jin, S., Gruber, D., Harmuth, H., Soudier, J., Meunier, P. & Lemaistre, H., 2012, Proceedings of ALAFAR Congress 2012. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  170. Published

    Thermo-Mechanical Modelling of Steel Ladle Process Cycles

    Jin, S., Auer, T., Gruber, D., Harmuth, H., Fréchette, M. H. & Li, Y., 2012, In: Interceram / Refractories manual. p. 37-41

    Research output: Contribution to journal › Article › Research › peer-review

  171. Published

    Thermomechanical Steel Ladle Simulation Including a Mohr-Coulomb Plasticity Failure Model

    Jin, S., Gruber, D., Harmuth, H. & Fréchette, M.-H., 2012, In: RHI bulletin : the journal of refractory innovations. 1, p. 39-43

    Research output: Contribution to journal › Article › Research › peer-review

  172. Published

    Zum Gedenken an Felix Trojer

    Harmuth, H., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 459-467

    Research output: Contribution to journal › Article › Research › peer-review

  173. 2011
  174. Published

    Classification of thermomechnical impact factors and prediction model for ladle preheating

    Jin, S., Harmuth, H., Gruber, D., Auer, T. & Li, Y., 2011, In: Journal of Wuhan University of Technology. 34, 1, p. 28-31

    Research output: Contribution to journal › Article › Research › peer-review

  175. Published

    Corrosion Mechanisms of Refractory Materials Used in Secondary Metallurgy

    Melcher, F. & Harmuth, H., 2011, In: Refractories worldforum. 3, p. 99-104

    Research output: Contribution to journal › Article › Research › peer-review

  176. Published

    Corrosive wear of refractories in steel ladles - Part I: Fundamentals

    Harmuth, H., Vollmann, S. & Rössler, R., 2011, Refractories-Technology to Sustain the Global Environment. p. 74-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  177. Published

    Corrosive wear of refractories in steel ladles - Part II: Influence of Fluid Flow

    Vollmann, S., Harmuth, H. & Kronthaler, A., 2011, Refractories-Technology to Sustain the Global Environment. p. 75-75

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  178. Published

    Evaluation of the Drucker-Prager parameters at elevated temperatures of two refractories

    Dahlem, E., Gruber, D., Auer, T., Harmuth, H., Huger, M. & Chotard, T., 2011, Evaluation of the Drucker-Prager parameters at elevated temperatures of two refractories. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  179. Published

    Evaluation of the Drucker-Prager Parameters (Cohesion and Friction Angle) at Elevated Temperature for two Refractories

    Dahlem, E., Gruber, D., Auer, T., Harmuth, H., Huger, M. & Chotard, T., 2011, Refractories-Technology to Sustain the Global Environment. p. 93-93

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  180. Published

    Investigation of mold powder crystallization – evaluation and interpretation of measurements from laboratory and production site

    Harmuth, H., Kölbl, N., Marschall, I. & Brandl, W., 2011, Investigation of mold powder crystallization – evaluation and interpretation of measurements from laboratory and production site. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  181. Published

    Melt corrosion of refractories in the nonferrous industry and the electric arc furnace: A thermochemical approach

    Reiter, V. & Harmuth, H., 2011, In: Pure and Applied Chemistry. p. 1093-1104

    Research output: Contribution to journal › Article › Research › peer-review

  182. Published

    Micromechanical modelling of magnesia-spinel refractories: from thermal damage to damaging elastic behaviour

    Grasset-Bourdel, R., Alzina, A., Huger, M., Chotard, T., Gruber, D. & Harmuth, H., 2011, Micromechanical modelling of magnesia-spinel refractories: from thermal damage to damaging elastic behaviour. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  183. Published

    Modélisation micro-mécanique de réfractaires magnésie-spinelle: de l'endommagement dû au différentiel de dilatation pendant l'étape de refroidissement au comportement élastique endommageable en traction

    Grasset-Bourdel, R., Alzina, A., Huger, M., Chotard, T., Gruber, D. & Harmuth, H., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  184. Published

    Naturwissenschaftliche Untersuchungsergebnisse an Gebrauchskeramiken vom mittelbronzezeitlichen Arbeits- und Siedlungsplatz Schlosser/KG Schwarzenbach/OG Trieben

    Presslinger, H., Eibner, C. & Harmuth, H., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. p. 28-33

    Research output: Contribution to journal › Article › Research › peer-review

  185. Published

    New methods for the determination of cohesion and friction angle of refractories at elevated temperatures

    Dahlem, E., Gruber, D., Auer, T., Harmuth, H., Huger, M. & Chotard, T., 2011, In: Interceram. p. 129-134

    Research output: Contribution to journal › Article › Research › peer-review

  186. Published

    Optimisation d'une géométrie d'éprouvette pour l'évaluation à haute température des paramétres de Drucker-Prager sur des matériaux réfractaires

    Dahlem, E., Gruber, D., Auer, T., Harmuth, H., Huger, M. & Chotard, T., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  187. Published

    Optimization of 3D RVE for anisotropy index reduction in modelling thermoelastic properties of two-phase composites using a periodic homogenisation method

    Grasset-Bourdel, R., Alzina, A., Tessier-Doyen, N., Huger, M., Chotard, T., Schmitt, N., Gruber, D. & Harmuth, H., 2011, In: Computational materials science. 50, p. 3136-3144

    Research output: Contribution to journal › Article › Research › peer-review

  188. Published

    Simulation of the Thermomechanical Behaviour of Magnesia-Spinel Refractories

    Grasset-Bourdel, R., Alzina, A., Huger, M., Chotard, T., Gruber, D. & Harmuth, H., 2011, Refractories-Technology to Sustain the Global Environment. p. 111-111

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  189. Published

    Single Hot Thermocouple Technique for the Characterization of the Crystallization Behavior of Transparent or Translucent Liquids

    Kölbl, N., Marschall, I. & Harmuth, H., 2011, In: Journal of materials science. 46, p. 6248-6254

    Research output: Contribution to journal › Article › Research › peer-review

  190. Published

    The fracture resistance of refractories

    Bradt, R. C. & Harmuth, H., 2011, In: Refractories worldforum. 3, p. 129-135

    Research output: Contribution to journal › Article › Research › peer-review

  191. Published

    Thermochemical and Fluid-Dynamical Investigations of Refractory Wear by Ladle Slags

    Harmuth, H. & Vollmann, S., 2011, In: Interceram. p. 88-90

    Research output: Contribution to journal › Article › Research › peer-review

  192. Published

    Thermo-mechanical Modeling of a Complete Steel Ladle Process

    Jin, S., Auer, T., Gruber, D., Harmuth, H., Fréchette, M. H. & Li, Y., 2011, Refractories-Technology to Sustain the Global Environment. p. 10-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  193. Published

    Thermo-mechanical simulation of a steel ladle process cycle with special emphasis on the preheating process

    Auer, T., Gruber, D., Harmuth, H., Jin, S. & Kronthaler, A., 2011, Refractories for Industrials. p. 39-41

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  194. 2010
  195. Published

    Application of Electric Voltages for Improved Protection of MgO Refractory Material

    Sauerbrey, R., Mori, G., Majcenovic, C. & Harmuth, H., 2010, In: Refractories worldforum. 2, p. 105-110

    Research output: Contribution to journal › Article › Research › peer-review

  196. Published

    Characterisation of the fracture path in ‘flexible’ refractories

    Harmuth, H., 2010, Refractories: recent developments in materials, production and use : selected papers from the 12th International Ceramics Congress, part of CIMTEC 2010-12th International Ceramics Congress and 5th Forum on New Materials, Montecatini Terme, Italy, June 6 - 11, 2010 ; part I including Symposium CL . p. 30-36 (Advances in science and technology; vol. 70).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  197. Published

    Comparison of the slag rim formation of two different mould powders

    Marschall, I., Kölbl, N. & Harmuth, H., 2010, Proceedings of the International Conference on Materials Science & Technology (MS&T'10) . p. 1591-1600

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  198. Published

    Computational fluid dynamics simulations of mass transfer coefficients in gas purged steel ladles.

    Vollmann, S. & Harmuth, H., 2010, Computational fluid dynamics simulations of mass transfer coefficients in gas purged steel ladles.. p. 441-451

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  199. Published

    Corrosive mass transfer in steel ladles.

    Vollmann, S. & Harmuth, H., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  200. Published

    Development of a Microstructural Methodology to Establish Structur/Property Relations of Refractories and First Results for Magnesia Spinel Materials

    Grasset-Bourdel, R., Gruber, D., Harmuth, H., Huger, M., Emler, R. & Chotard, T., 2010, Proceedings of the 49th Conference of Metallurgists; Advances in Refractories V. p. 425-440

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  201. Published

    Die Single Hot Thermocouple Technique zur Charakterisierung des Kristallisationsverhaltens transparenter Schmelzen

    Kölbl, N., Marschall, I. & Harmuth, H., 2010, Stranggießen. p. 81-86

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  202. Published

    "Flexibility" of refractories - fracture mechanical and microscopic investigations

    Harmuth, H., 2010, Proceedings of the International Scientific Conference Refractories, Furnaces and Thermal Insulations. p. 36-41

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  203. Published

    Investigation of Refractory Brittleness by Fracture Mechanical and Fractographic Methods

    Harmuth, H. & Bradt, R. C., 2010, In: Interceram / Refractories manual. p. 6-10

    Research output: Contribution to journal › Article › Research › peer-review

  204. Published

    Investigation of Refractory Corrosion of a Gas-stirred Steel Ladle by Simulation.

    Vollmann, S. & Harmuth, H., 2010, 12th International Ceramics Congress Part I. p. 199-204

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  205. Published

    Investigation of Refractory Corrosion of a Gas-stirred Steel Ladle by Simulation.

    Vollmann, S. & Harmuth, H., 2010, Refractories: recent developments in materials, production and use : selected papers from the 12th International Ceramics Congress, part of CIMTEC 2010-12th International Ceramics Congress and 5th Forum on New Materials, Montecatini Terme, Italy, June 6 - 11, 2010 ; part I including Symposium CL . p. 199-204 (Advances in science and technology; vol. 70).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  206. Published

    Investigation of the rotary slagging test by computational fluid dynamics calculations

    Vollmann, S. & Harmuth, H., 2010, In: Journal of the Technical Association of Refractories. 30, p. 10-18

    Research output: Contribution to journal › Article › Research › peer-review

  207. Published

    Melt corrosion of refractories in the non-ferrous industry and the electric arc furnace: A thermochemical approach

    Reiter, V. & Harmuth, H., 2010, 14th International Symposium on Solubility Phenomena ISSP 2010. p. 34-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  208. Published

    Microstructural and thermochemical analysis of spinel castables used in steel ladles

    Melcher, F. & Harmuth, H., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  209. Published

    Modélisation des propriétés d'élasticité de matériaux réfractaires modéles par homogénéisation périodique

    Grasset-Bourdel, R., Gruber, D., Harmuth, H., Schmitt, N., Alzina, A., Huger, M. & Chotard, T., 2010, Modélisation des propriétés d'élasticité de matériaux réfractaires modéles par homogénéisation périodique. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  210. Published

    New methode to Determine the Cohesion and the Friction Angle of Refractory Materials ar Room Temperature and at Elevated Temperature

    Dahlem, E., Gruber, D., Auer, T., Harmuth, H., Huger, M. & Chotard, T., 2010, Proceedings of the 49th Conference of Metallurgists; Advances in Refractories V. p. 497-504

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  211. Published

    Optimisation d’une géométrie d’éprouvette pour essai sous sollicitation combinée compression-cisaillement de matériaux réfractaires

    Dahlem, E., Gruber, D., Auer, T., Harmuth, H., Huger, M. & Chotard, T., 2010, Materiaux 2010. p. 97-99

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  212. Published

    Predicition of volatile recirculation in cement clinker burning systems by means of process simulation

    Emler, R. & Harmuth, H., 2010, 14th International Symposium on Solubility Phenomena ISSP 2010. p. 35-35

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  213. Published

    Propriétés thermomécaniques de réfractaires magnésie/spinelle modèles

    Grasset-Bourdel, R., Emler, R., Gruber, D., Harmuth, H., Huger, M. & Chotard, T., 2010, Propriétés thermomécaniques de réfractaires magnésie/spinelle modèles. p. 100-102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  214. Published

    Relevance of numerical simulation for refractory corrosion in steel industry

    Harmuth, H., Vollmann, S., Melcher, F., Gruber, D. & Majcenovic, C., 2010, Advances in Refractories V, 5th International Symposium, The Michel Rigaud Symposium. p. 453-463

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  215. Published

    Simulation of moulding of refractory bricks

    Gruber, D. & Harmuth, H., 2010, Refractories: recent developments in materials, production and use : selected papers from the 12th International Ceramics Congress, part of CIMTEC 2010-12th International Ceramics Congress and 5th Forum on New Materials, Montecatini Terme, Italy, June 6 - 11, 2010 ; part I including Symposium CL . p. 167-172 (Advances in science and technology; vol. 70).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  216. Published

    Simulation of moulding of Refractory bricks

    Gruber, D. & Harmuth, H., 2010, CIMTEC, 12th International Ceramics Congress Part I. p. 167-172

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  217. Published

    Thermomechanical Failure Modes of Steel Ladles

    Gruber, D., Auer, T. & Harmuth, H., 2010, Proceedings of the 49th Conference of Metallurgists; Advances in Refractories V,. p. 465-476

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  218. Published

    Thermo-mechanical simulation of two alternative steel ladle linings

    Auer, T., Gruber, D. & Harmuth, H., 2010, Refractories for Metallurgy. p. 94-97

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  219. Published

    Untersuchung der Sprödigkeit feuerfester Baustoffe mit bruchmechanischen und fraktographischen Methoden

    Harmuth, H. & Bradt, R. C., 2010, In: Keramische Zeitschrift. 62, p. 264-269

    Research output: Contribution to journal › Article › Research › peer-review

  220. 2009
  221. Published

    An Austrian experience with identification and assessment of alkali-aggregate reaction in motorways

    Fischböck, E. K. & Harmuth, H., 2009, Proceedings of the international conference on concrete repair, rehabilitation and retrofitting 2008. p. 441-447

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  222. Published

    Application of attenuation of resonant frequencies for characterisation of alkali-silica reaction

    Fischböck, E., Harmuth, H. & Eberl, S., 2009, Concrete Durability and Service Life Planning -ConcreteLife'09. p. 196-203

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  223. Published

    Basic understanding of wear of refractories in metallurgical vessels

    Gruber, D. & Harmuth, H., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  224. Published

    Corrosion mechanisms of magnesia chromite bricks in contact with a secondary steelmaking slag

    Melcher, F., Harmuth, H., Pichlbauer, S., Neuböck, R. & Rössler, R., 2009, 11th Biennal Worldwide Congress on Refractories. p. 26-CD

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  225. Published

    Corrosion protection of MgO electrodes at 1400 °C

    Sauerbrey, R., Mori, G., Majcenovic, C. & Harmuth, H., 2009, In: Corrosion science. p. 1-5

    Research output: Contribution to journal › Article › Research › peer-review

  226. Published

    Does combination of different materials influence thermomechanical lining behaviour? A case study for a torpedo ladle

    Auer, T., Gruber, D., Harmuth, H. & Glaser, M., 2009, Refractories in a Shifting Globalized World. p. 23-23

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  227. Published

    Fractographic investigation of refractories

    Harmuth, H. & Manhart, C., 2009, UNITECR 2009 Summary Booklet. p. 26-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  228. Published

    Fractographic investigations of ordinary ceramic refractory materials with reduced brittleness

    Harmuth, H. & Manhart, C., 2009, Fractography of Advanced Ceramics III. p. 209-215

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  229. Published

    Influence of burning conditions on beta-SiAlON bond of Al2O3 refractories

    Pichlbauer, S., Harmuth, H., Lenčéš, Z., Šajgalîk, P. & Petrušková, V., 2009, UNITECR 2009 - Unified International Technical Conference on Refractories - 11th Biennial Worldwide Congress. p. 15-dig. CD

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  230. Published

    Investigation of slag corrosion by CFD calculations

    Vollmann, S. & Harmuth, H., 2009, Investigation of slag corrosion by CFD calculations. ASMET, p. digital-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  231. Published

    Investigation of slag corrosion by fluid dynamics calculations

    Vollmann, S., Harmuth, H. & Gruber, D., 2009, UNITECR ´09 - Unified International Technical Conference on Refractories. p. 25-25

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  232. Published

    Investigation of the influence of fluid flow on slag corrosion of refractories by CFD calculations

    Vollmann, S., Harmuth, H. & Buchberger, B., 2009, Proceedings 52th International Colloquium on Refractories, Aachen, Germany. p. 102-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  233. Published

    Investigation of the melting behaviour of mould powders

    Kölbl, N., Marschall, I. & Harmuth, H., 2009, Molten 2009, Proceedings of the Viii International Conference on Molten Slags, Fluxes and Salts. p. 1031-1040

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  234. Published

    Preparation of β-sialon bonded Al2O3-refractories in different atmospheres

    Pichlbauer, S., Harmuth, H., Lenčéš, Z., Šajgalîk, P. & Petrušková, V., 2009, ECERS - 11th International Conference and Exhibition of the European Ceramic Society. p. 179-CD

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  235. Published

    RESONANT FREQUENCY AND DAMPING ANALYSIS OF REFRACTORIES WITH AND WITHOUT REDUCED BRITTLENESS

    Manhart, C. & Harmuth, H., 2009, Refractories in a Shifting Globalized World. p. 14-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  236. Published

    Simulation of refractories resonance frequency

    Gruber, D., Auer, T. & Harmuth, H., 2009, UNITECR'09, 11th Biannial Worldwide Congress. p. 27-dig.-CD

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  237. Published

    Uniaxial and biaxial fracture behaviour of refractory materials

    Tschegg, E., Fendt, K. T., Manhart, C. & Harmuth, H., 2009, In: Engineering Fracture Mechanics. 76, p. 2249-2259

    Research output: Contribution to journal › Article › Research › peer-review

  238. Published

    Untersuchungen zur Anwendung der Dämpfung von Resonanzfrequenzen zur Bewertung der Alkali-Kieselsäurereaktion

    Fischböck, E. & Harmuth, H., 2009, 17. Internationale Baustofftagung IBAUSIL 23.-25.9.2009, Weimar. p. 2-0277-2-0281

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  239. 2008
  240. Published

    Characterisation of the melting behaviour of mould powders

    Marschall, I., Kölbl, N. & Harmuth, H., 2008, 6th European Conference on Continuous Casting 2008. p. 17-17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  241. Published

    Corrosion of magnesia chromite refractories in the RH-degasser

    Melcher, F., Reiter, V. & Harmuth, H., 2008, 51st International colloquium on refractories. p. 121-124

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  242. Published

    Durability of Brick Lined Steel Ladles from a Mechanical point of View

    Gruber, D. & Harmuth, H., 2008, In: Steel research international. p. 913-917

    Research output: Contribution to journal › Article › Research › peer-review

  243. Published

    Hot stage microscopy for in situ observations of the melting and crystallisation behaviour of mould powders

    Kölbl, N. & Harmuth, H., 2008, Scanmet III 3rd International Conference on Process Development in Iron and Steelmaking. p. 73-81

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  244. Published

    Identifikation und Beurteilung der Alkali-Gesteinskörnungs-Reaktion

    Harmuth, H. & Fischböck, E. K., 2008, In: FSV aktuell : Mitteilungen der Österreichischen Forschungsgemeinschaft Straße und Verkehr (FSV). März 08, p. 3-4

    Research output: Contribution to journal › Article › Research › peer-review

  245. Published

    Influence of an irreversible expansion of a teeming ladle lining on its thermo-mechanical behaviour

    Gruber, D., Auer, T., Harmuth, H. & Buchebner, G., 2008, Refractories in Metallurgy, 51st International Colloquium on Refractories. p. 73-75

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  246. Published

    Investigation of Slag Rim Growth in the Continuous Casting Process

    Marschall, I. & Harmuth, H., 2008, Scanmet III 3rd International Conference on Process Development in Iron and Steelmaking Volume 2. p. 419-425

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  247. Published

    Mechanisms to reduce cracking in interior plasters attached to cement bonded permanent shuttering panels

    Kirschner, A. & Harmuth, H., 2008, In: Construction & building materials (Construction and building materials). 22, p. 99-105

    Research output: Contribution to journal › Article › Research › peer-review

  248. Published

    Microstructal and thermochemical analysis of spinel castables used in steel ladles

    Melcher, F., Harmuth, H. & Reiter, V., 2008, In: Interceram. p. 257-260 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  249. Published

    Microstructural and thermochemical analysis of alumina spinel castables used in steel ladles

    Melcher, F., Harmuth, H. & Reiter, V., 2008, XVI International Conference on Refractories Proceedings. p. 206-212

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  250. Published

    Microstructural and Thermochemical Analysis of Spinel Castables Used in Steel ladles

    Melcher, F., Harmuth, H. & Reiter, V., 2008, In: Interceram. p. 257-260

    Research output: Contribution to journal › Article › Research › peer-review

  251. 2007
  252. Published

    Charakterisierung der Produktgleichmäßigkeit am Beispiel der Frühfestigkeit von Zement

    Schnedl, G. & Harmuth, H., 2007, In: Cement, lime, gypsum = Zement, Kalk, Gips : ZKG international. 12, p. 96-103

    Research output: Contribution to journal › Article › Research › peer-review

  253. Published

    Development of a device and method for fractographic investigations of refractories

    Manhart, C. & Harmuth, H., 2007, Unified International technical Conference on Refractories UNITECR'07. p. 494-497

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  254. Published

    Die Verschleißfutterzustellung des "Franzisci-Hochofens" in Möderbrugg (Steiermark)

    Presslinger, H., Harmuth, H. & Neuper, W., 2007, In: Res montanarum : Zeitschrift des Montanhistorischen Vereins für Österreich. p. 60-63

    Research output: Contribution to journal › Article › Research › peer-review

  255. Published

    Endbericht zum Bridgeprojekt " Verschleiß von Feuerfestmaterialien durch Stahlwerksschlacken"

    Melcher, F. & Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  256. Published

    Finite Element investigation of the crack formation in the slag line of a teeming ladle

    Gruber, D., Auer, T., Harmuth, H. & Rotsch, J., 2007, Unified International technical Conference on Refractories UNITECR'07. p. 182-185

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  257. Published

    Fracture Mechanical Characterisation of Refractories and Application for Assessment and Simulation of the Thermal Shock Behaviour

    Harmuth, H., Manhart, C., Auer, T. & Gruber, D., 2007, In: Ceramic forum international (CFI). p. E80-E86

    Research output: Contribution to journal › Article › Research › peer-review

  258. Published

    Identifikation von treibenden Zuschlagkomponenten bei zwei zementgebundenen Probekörpern mit besonderen Zuschlägen

    Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  259. Published

    Investigation of Refractory/Slag Equilibria in Steel Ladles

    Melcher, F., Reiter, V. & Harmuth, H., 2007, Calphad XXXVI. p. 72-73

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  260. Published

    Investigations of corrosionof different alumina spinel castables by ladle slags

    Melcher, F., Reiter, V., Harmuth, H., Rössler, R., Ecker, M. & Molinari, T., 2007, Unitecr '07, Unified International Technical Conference on Refractories. p. 230-233

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  261. Published

    Microstructural assessment of alumina porcellain specimens

    Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  262. Published

    Microstructural Investigation of four porcellain specimens

    Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  263. Published

    Numerical analysis of the thermomechanical behaviour of an EAF roof delta piece

    Auer, T., Gruber, D. & Harmuth, H., 2007, Unified International technical Conference on Refractories UNITECR'07. p. 174-177

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  264. Published

    Prediction of the chemical loading of refractories in a cement rotary kiln by means of process simulation

    Emler, R., Harmuth, H. & Nievoll, J., 2007, UNITECR '07 - Unified International Technical Conference on Refractories. p. 577-580

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  265. Published

    Prediction of the chemical loading of refractories in cement rotary kilns by means of process simulation

    Emler, R. & Harmuth, H., 2007, 9th Annual GTT-Technologies Workshop. p. 8-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  266. Published

    Thermal modelling of a 300t torpedo ladle with Finite Element Methods

    Auer, T., Gruber, D., Harmuth, H. & Zirkl, R., 2007, Thermal modelling of a 300t torpedo ladle with Finite Element Methods. p. 159-163

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  267. Published

    Thermochemical characterisation of fayalite slags of the non-ferrous industry and refractory/slag equilibria

    Reiter, V., Melcher, F. & Harmuth, H., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  268. Published

    Thermochemical Modeling of EAF Slags and Refractory/Slag equilibria

    Reiter, V., Melcher, F., Harmuth, H. & Netzer, W., 2007, Unitecr '07, Unified International Technical Conference on Refractories. p. 170-173

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  269. Published

    Thermo-mechanical FE-Simulation of a teeming ladle slag line

    Gruber, D., Auer, T., Harmuth, H. & Rotsch, J., 2007, STEELSIM 2007. p. 291-294

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  270. Published

    Untersuchung der Rissbildung an 4 zementgebundenen Probekörpern mit besonderen Zuschlägen

    Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  271. Published

    Untersuchung der Rissbildung an zementgebundenen Probekörpern

    Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  272. Published

    Untersuchung eines Ansatzringes aus dem Zementrotierofen eines südamerikanischen Zementherstellers

    Harmuth, H. & Kölbl, N., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  273. Published

    Untersuchungen zur Verminderung der Rissbildungsneigung des modularen Fertigbausystems "Heraklith H-TH"

    Harmuth, H. & Fischböck, E. K., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  274. Published

    Untersuchung synthetischer Zuschläge in Hinblick auf potenziell treibende Bestandteile bei der Verwendung als Zuschlag in zementgebundenen Baustoffen

    Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  275. Published

    Untersuchung von Bohrkernen aus einer Ortbetonleitwand von der A1-Westautobahn nähe Haag Richtungsfahrbahn Wien

    Fischböck, E. K. & Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  276. Published

    Untersuchung von Grundstoffen für die Mineralfaserproduktion in Hinblick auf ihr Schmelzverhalten

    Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  277. 2006
  278. Published

    Fem based thermo-mechanical investigations of RH-snorkels

    Gruber, D., Auer, T., Harmuth, H. & Sormann, A., 30 Mar 2006, UNITECR '05 - Proceedings of the Unified International Technical Conference on Refractories: 9th Biennial Worldwide Congress on Refractories. Smith, J. D. (ed.). p. 970-974 5 p. (UNITECR '05 - Proceedings of the Unified International Technical Conference on Refractories: 9th Biennial Worldwide Congress on Refractories).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  279. Published

    Numerical investigations of mechanical behaviour of refractories

    Auer, T., Gruber, D., Harmuth, H. & Triessnig, A., 30 Mar 2006, UNITECR '05 - Proceedings of the Unified International Technical Conference on Refractories: 9th Biennial Worldwide Congress on Refractories. Smith, J. D. (ed.). p. 985-989 5 p. (UNITECR '05 - Proceedings of the Unified International Technical Conference on Refractories: 9th Biennial Worldwide Congress on Refractories).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  280. Published

    Thermal and thermo-mechanical modeling of a 300t torpedo ladle

    Gruber, D., Auer, T., Harmuth, H. & Zirkl, R., 30 Mar 2006, UNITECR '05 - Proceedings of the Unified International Technical Conference on Refractories: 9th Biennial Worldwide Congress on Refractories. Smith, J. D. (ed.). p. 896-899 4 p. (UNITECR '05 - Proceedings of the Unified International Technical Conference on Refractories: 9th Biennial Worldwide Congress on Refractories).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  281. Published

    Anwendung eines stereoskopischen Verfahrens zur fraktografischen Charakterisierung von grobkeramischen Baustoffen

    Manhart, C. & Harmuth, H., 2006, In: Practical metallography = Praktische Metallographie.

    Research output: Contribution to journal › Article › Research › peer-review

  282. Published

    Application of fluorine containing raw materials in the cement industry

    Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  283. Published

    Beurteilung von drei Feuerfeststeinen in Hinblick auf den Einsatz der Sorten im Maerzofen

    Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  284. Published

    Contributions to Refractory Fracture Mechanical and Fractographic Investigations

    Auer, T., Manhart, C. & Harmuth, H., 2006, In: RHI bulletin : the journal of refractory innovations. 1, p. 38-42 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  285. Published

    Ermittlung der Viskosität bei 1400 °C einer Glasphasen- und Schlackenprobe (Untersuchung der Problematik der Messbarkeit)

    Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  286. Published

    Identifikation und Beurteilung der Alkali-Zuschlag-Reaktion

    Harmuth, H. & Fischböck, E. K., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  287. Published

    Identifikation und Beurteilung der Alkali-Zuschlag-Reaktion.

    Harmuth, H. & Fischböck, E. K., 2006, In: Straßenforschung. p. 5-42

    Research output: Contribution to journal › Article › Research › peer-review

  288. Published

    Identifikation und Beurteilung der Alkali-Zuschlag-Reaktion. Endbericht Mai 2006

    Fischböck, E. K. & Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  289. Published

    Identifikation und Beurteilung der Alkali-Zuschlag-Reaktion. Projektbericht April 2006

    Fischböck, E. K. & Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  290. Published

    Identifikation und Beurteilung der Alkali-Zuschlag-Reaktion. Projektbericht Februar 2006

    Fischböck, E. K. & Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  291. Published

    Numerical failure analysis for the refractory lining of a tundish

    Auer, T., Gruber, D. & Harmuth, H., 2006, 49th International Colloquium on Refractories. p. 194-196

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  292. Published

    Numerical simulation of a fracture test for brittle disordered materials

    Auer, T. & Harmuth, H., 2006, Fracture of Nano and Engeneering Materials and Structures. p. 591-592

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  293. Published

    Quarterly Report Q2– Simulation activities GHI-RRC

    Gruber, D., Auer, T., Gerer, S. & Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  294. Published

    Quarterly Report Q3– Simulation activities GHI-RRC

    Gruber, D., Auer, T., Gerer, S. & Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  295. Published

    Tätigkeitsbericht des Christian-Doppler-Labors für eigenschaftsoptimierte Baustoffe für die Laufzeit vom 01.04.1999 bis 31.03.2006

    Kirschner, A., Harmuth, H., Manhart, C., Gruber, D., Auer, T. & Marschall, I., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  296. Published

    Universitärer Forschungscluster "Sustainable Technologies in Metal Production and Processing" (STMP)

    Antrekowitsch, H., Biedermann, H., Buchmayr, B., Ebner, F., Eichlseder, W., Harmuth, H., Kepplinger, W., Kessler, F., Krieger, W., Lorber, K. & Ludwig, A., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 263-265

    Research output: Contribution to journal › Article › Research › peer-review

  297. Published

    Untersuchung des Verschleißes der feuerfesten Zustellung in den Düsenrohren eines Hochofens

    Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  298. Published

    Untersuchung einer Keramikprobe in Hinblick auf den Restquarzgehalt

    Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  299. Published

    Untersuchung eines als Bettasche bezeichneten Materials aus der Müllverbrennung in Hinblick auf potentiell treibende Bestandteile

    Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  300. Published

    Untersuchung eines gebrauchten und eines ungebrauchten Monoblockstopfens industrieller Fertigung in Hinblick auf die Ursache des Stopfenbruches

    Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  301. Published

    Untersuchung von LD-Schlacken in Hinblick auf treibende CaO-reiche Phasen, die die Verwendbarkeit als Baustoff einschränken

    Harmuth, H., Melcher, F. & Reiter, V., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  302. Published

    Untersuchung von zwei Keramikproben in Hinblick auf unterschiedlichen Restquarzgehalt

    Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  303. 2005
  304. Published

    FEM based thermomechanical investigations of RH-snorkels

    Gruber, D., Auer, T., Harmuth, H. & Sormann, A., 8 Nov 2005, Proceedings of the UNITECR'05. Orlando, USA, p. 970-974 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  305. Published

    Numerical investigation of mechanical behaviour of refractories

    Auer, T., Gruber, D., Harmuth, H. & Triessnig, A., 8 Nov 2005, Proceedings of the UNITECR'05. Orlando, USA, p. 985-989 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  306. Published

    Contributions to the Fracture Mechanical and Fractographic Investigation of Refractories

    Auer, T., Manhart, C. & Harmuth, H., 2005, In: RHI bulletin : the journal of refractory innovations. p. 38-42

    Research output: Contribution to journal › Article › Research › peer-review

  307. Published

    Die Entwicklung der Feuerfestindustrie im Spiegel von 150 Jahren BHM

    Harmuth, H. & Pirker, S., 2005, In: Berg- und hüttenmännische Monatshefte : BHM. p. 45-50

    Research output: Contribution to journal › Article › Research › peer-review

  308. Published

    Fraktografische Untersuchung zur Charakterisierung von Baustoffen mit grobkeramischer Struktur

    Manhart, C. & Harmuth, H., 2005, Fortschritte in der Metallographie, Sonderbände der Praktischen Metallographie, Band 37. p. 223-228

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  309. Published

    Mechanical and fracture mechanical characterization of building materials used for external thermal insulation composite systems

    Nilica, R. & Harmuth, H., 2005, In: Cement and concrete research. p. 1641-1645

    Research output: Contribution to journal › Article › Research › peer-review

  310. Published

    Thermal and Thermomechanical FE-modelling of a 300 t Torpedo Ladle

    Gruber, D., Auer, T., Harmuth, H. & Zirkl, R., 2005, Proceedings of the conference UNITECR'05. p. 896-899

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  311. 2004
  312. Published

    FEM simulation of the thermomechanical behaviour of the refractory lining of a blast furnace

    Gruber, D., Harmuth, H. & Andreev, K., 2004, In: Journal of materials processing technology. 155-146, p. 1539-1543

    Research output: Contribution to journal › Article › Research › peer-review

  313. Published

    Investigation of geopolymer binders with respect to their application for building materials

    Harmuth, H. & Kirschner, A., 2004, In: Ceramics Silikáty. 48.2004, 3, p. 117-120 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  314. Published

    Optimisation of the lining design of a BOF converter by finite element simulations

    Gruber, D., Harmuth, H. & Andreev, K., 2004, In: Steel research international. 75, p. 451-457

    Research output: Contribution to journal › Article › Research › peer-review

  315. Published

    Thermo-mechanical behaviour of the refractory lining of a BOF-converter – a numerical study

    Gruber, D., Andreev, K., Harmuth, H. & Presslinger, H., 2004, In: Taikabutsu = Refractories / Taikabutsu gijutsu kyōkai. 561, 10, p. 478-482

    Research output: Contribution to journal › Article › Research › peer-review

  316. Published

    Untersuchungen zur Schadensbildung an Wärmedämmverbundsystem

    Harmuth, H. & Nilica, R., 2004, 11 p. Institut für Gesteinshüttenkunde

    Research output: Other contribution › Research

  317. 2003
  318. Published

    Untersuchung des thermomechanischen Verhaltens der RH-Anlage Donawitz mit der Methode der Finiten Elemente

    Gruber, D., Andreev, K. & Harmuth, H., 2003, GHC 2003. Montanuniversität Leoben, Institut für Gesteinshüttenkunde, p. 33-43

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

View graph of relations

Contact

Phone: 3200

Latest Research Output

View more (295)