Hans-Peter Gänser

1 - 62 out of 62Page size: 100

Research output

  1. 2025
  2. Published

    Finite Element Investigation of the Dynamic Behavior of High-Speed Turnouts with Swing-Nose Crossing

    Sistaninia, M., Daves, W., Bucher, C., Antretter, T. & Gänser, H. P., 2025, Advances in Dynamics of Vehicles on Roads and Tracks III - Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, Rail Vehicles. Huang, W. & Ahmadian, M. (eds.). p. 1047-1058 12 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. 2023
  4. Published

    Fatigue life assessment of metal foils in multifunctional composites via combined experiments and simulations

    Trost, C. O. W., Žák, S., Ruderes, K., Hammer, R., Rosc, J., Krivec, T., Schell, N., Gänser, H.-P., Hohenwarter, A. & Cordill, M. J., 15 Jun 2023, In: Composites Part B: Engineering. 259.2023, 15 June, 110715.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Local Assessment of Mechanical Properties in Forged Alloy 718 Components Based on the Simulation of the Microstructure Evolution During Production

    Gruber, C., Raninger, P., Stanojevic, A., Godor, F., Gänser, H. P., Marsoner, S. & Stockinger, M., 2023, Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives, 2023. Ott, E. A., Andersson, J., Sudbrack, C., Bi, Z., Bockenstedt, K., Dempster, I., Fahrmann, M., Jablonski, P., Kirka, M., Liu, X., Nagahama, D., Smith, T., Stockinger, M. & Wessman, A. (eds.). p. 49-63 15 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. 2022
  7. Published

    Microstructural Impact on Fatigue Crack Growth Behavior of Alloy 718

    Gruber, C., Raninger, P., Maierhofer, J., Gänser, H. P., Stanojevic, A., Hohenwarter, A. & Pippan, R., 21 Apr 2022, In: Metals. 12.2022, 5, 14 p., 710.

    Research output: Contribution to journal › Article › Research › peer-review

  8. 2021
  9. Published

    Ductile failure modelling in pre-cracked solids using coupled fracture locus theory

    Baltic, S., Magnien, J., Kolitsch, S., Gänser, H.-P., Antretter, T. & Hammer, R., Jul 2021, In: Engineering Fracture Mechanics. 252.2021, July, 13 p., 107845.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Machine learning assisted calibration of a ductile fracture locus model

    Baltic, S., Asadzadeh, M. Z., Hammer, P., Magnien, J., Gänser, H. P., Antretter, T. & Hammer, R., May 2021, In: Materials and Design. 203.2021, May, 15 p., 109604.

    Research output: Contribution to journal › Article › Research › peer-review

  11. 2020
  12. Published

    Fatigue crack growth model including load sequence effects – Model development and calibration for railway axle steels

    Maierhofer, J., Gänser, H. P., Simunek, D., Leitner, M., Pippan, R. & Luke, M., 1 Mar 2020, In: International Journal of Fatigue. 132.2020, March, 11 p., 105377.

    Research output: Contribution to journal › Article › Research › peer-review

  13. 2019
  14. E-pub ahead of print

    Fatigue crack growth in railway axle specimens – Transferability and model validation

    Simunek, D., Leitner, M., Rieger, M., Pippan, R., Gänser, H.-P. & Weber, F. J., 12 Dec 2019, (E-pub ahead of print) In: International Journal of Fatigue. 133.2020, 14 p., 105421.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Analytical and Numerical Crack Growth Analysis of 1:3 Scaled Railway Axle Specimens

    Simunek, D., Leitner, M., Maierhofer, J., Gänser, H.-P. & Pippan, R., 3 Feb 2019, In: Metals : open access journal . 9.2019, 2, p. 184 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Retardation of Fatigue Crack Growth in Rotating Bending Specimens with Semi-Elliptical Cracks

    Leitner, M., Simunek, D., Maierhofer, J., Gänser, H.-P. & Pippan, R., 1 Jan 2019, In: Metals : open access journal . 9.2019, 2, 13 p., 156.

    Research output: Contribution to journal › Article › Research › peer-review

  17. 2018
  18. Published

    Oxide induced crack closure in the near threshold regime: The effect of oxide debris release

    Maierhofer, J., Simunek, D., Gänser, H. P. & Pippan, R., 1 Dec 2018, In: International Journal of Fatigue. 117, p. 21-26 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. 2017
  20. Published

    Crack growth under constant amplitude loading and overload effects in 1:3 scale specimens

    Simunek, D., Leitner, M., Maierhofer, J. & Gänser, H.-P., 17 Aug 2017, In: Procedia structural integrity / ESIS. 2017, 4, p. 27-34 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. 2016
  22. E-pub ahead of print

    Extracting flow curves from nano-sized metal layers in thin film systems

    Kozic, D., Maier-Kiener, V., Konetschnik, R., Gänser, H.-P., Antretter, T., Brunner, R. & Kiener, D., 7 Dec 2016, (E-pub ahead of print) In: Scripta materialia. 130.2017, 15 March, p. 143-147 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. E-pub ahead of print

    Miniaturized fracture experiments to determine the toughness of individual films in a multilayer system

    Konetschnik, R., Kozic, D., Schöngrundner, R., Kolednik, O., Gänser, H.-P., Brunner, R. & Kiener, D., 25 Jan 2016, (E-pub ahead of print) In: Extreme Mechanics Letters. 8.2016, September, p. 235-244 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Fracture and Material Behavior of Thin Film composites

    Kozic, D., Konetschnik, R., Maier-Kiener, V., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2016, 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) . Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    High resolution determination of local residual stress gradients in single- and multilayer thin film systems

    Treml, R., Kozic, D., Zechner, J., Maeder, X., Gänser, H.-P., Schöngrundner, R., Michler, J., Brunner, R. & Kiener, D., 2016, In: Acta materialia. 103, p. 616-623

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Influence of the levelling process on the mechanical properties of heavy steel plates

    Kaltenbrunner, T., Antretter, T., Ecker, W., Kaiser, R., Gänser, H.-P. & Parteder, E., 2016, Proceedings of Rolling '16.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. 2015
  28. Published

    Fatigue crack growth under constant and variable amplitude loading at semi-elliptical and V-notched steel specimens

    Simunek, D., Leitner, M., Maierhofer, J. & Gänser, H.-P., 18 Nov 2015, p. 348-361.

    Research output: Contribution to conference › Presentation › Research › peer-review

  29. Published

    Fatigue crack growth under constant and variable amplitude loading at semi-elliptical and V-notched steel specimens

    Simunek, D., Leitner, M., Maierhofer, J. & Gänser, H.-P., 2015, In: Procedia Engineering. p. 348-361

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    How Residual Stresses Affect the Fracture Properties of Layered Thin Films

    Kiener, D., Treml, R., Kozic, D., Zalesak, J., Zechner, J., Keckes, J., Schöngrundner, R., Gänser, H.-P. & Brunner, R., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  31. Published

    Yield stress evolution in Inconel 718 samples under standard heat treatment process conditions of turbine disks

    Drexler, A., Maderbacher, H., Povodon-Karadeniz, E., Gänser, H. P., Ecker, W., Oberwinkler, B. & Fischersworring-Bunk, A., 2015, European Conference on Heat Treatment 2015 and 22nd IFHTSE Congress - Heat Treatment and Surface Engineering from Tradition to Innovation. Associazione Italiana di Metallurgia

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. 2014
  33. Published

    Evaluation of the residual stress distribution in thin films by means of the ion beam layer removal method

    Kozic, D., Treml, R., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014. Zhang, G. Q., Van Driel, W. D., Rodgers, P., Bailey, C. & de Saint Leger, O. (eds.). Institute of Electrical and Electronics Engineers, 6813785

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Fitness-for-Purpose and Damage Tolerance: Applications in Transportation and Energy Systems

    Gänser, H.-P., Tichy, R., Maierhofer, J., Horn, A. & Maier, B., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 375-379

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Residual Stress Investigations in Thin Film Systems: Experiment and Simulation

    Kozic, D., Treml, R., Sartory, B., Schöngrundner, R., Kiener, D., Antretter, T., Gänser, H.-P. & Brunner, R., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  36. 2013
  37. Published

    The influence of microstructure and operating temperature on the fatigue endurance of hot forged Inconel (R) 718 components

    Maderbacher, H., Oberwinkler, B., Gänser, H.-P., Tan, W., Rollett, M. & Stoschka, M., 15 Nov 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, p. 123-131

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    A testing apparatus for SEM in-situ fatigue testing of small scale specimens and a derived application

    Reiser, J., Maier, B., Guster, C., Gänser, H.-P. & Pippan, R., 2013,

    Proceedings of the ASME 2013 Pressure Vessels & Piping Division Conference

    .     p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Maximum Dissipation Crystal Plasticity - an approach to select active slip systems

    Orthaber, M., Antretter, T. & Gänser, H.-P., 2013, CM13: Proceedings of the International Conference on Computational Mechanics. p. ---

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    On the selection of active slip systems in rate independent crystal plasticity

    Orthaber, M., Antretter, T. & Gänser, H.-P., 2013, Key engineering materials. Vol. 554-557. p. 1147-1156 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  41. Published

    The influence of microstructure and operating temperature on the fatigue endurance of hot forged Inconel® 718 components

    Maderbacher, H., Oberwinkler, B., Gänser, H.-P., Tan, W., Rollett, M. & Stoschka, M., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. Volume 585, p. 123-131

    Research output: Contribution to journal › Article › Research › peer-review

  42. 2012
  43. Published

    Active slip systems in crystal plasticity and the principle of maximum dissipation

    Orthaber, M., Antretter, T., Gänser, H.-P. & Ecker, W., 2012, Proceeding of the 5th International Conference from Scientific Computing to Computational Engineering. p. 36-41

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    A new SEM in-situ fatigue testing apparatus and its application for evaluation of fatigue damage at higher load cycles

    Reiser, J., Maier, B., Gänser, H.-P., Guster, C. & Pippan, R., 2012, Proceedings of ECF 19. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    CRYSTAL PLASTICITY AND THE MAXIMUM RATE OF DISSIPATION

    Gänser, H.-P., Antretter, T., Ecker, W. & Orthaber, M., 2012, Book of Abstracts of 10th World Congress on Computational Mechanics. p. 100-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    NEW APPROACH FOR TESTING AND MODELLING OF FATIGUE BEHAVIOUR

    Reiser, J., Maier, B., Gänser, H.-P., Guster, C. & Pippan, R., 2012, Proceedings of World Congress on Computational Mechanics. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Prediction of the low cycle fatigue regime of the S-N curve with application to an aluminium alloy

    Eichlseder, W., Gänser, H.-P. & Jan, M.-M., 2012, In: Proceedings of the Institution of Mechanical Engineers / C (Part C, Journal of mechanical engineering science). 226, p. 1198-1209

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Simulation of tribological functionality of heterogeneous tribomaterials

    Grün, F., Godor, I., Sailer, W. & Gänser, H.-P., 2012, In: Tribology International. 46, p. 119-127

    Research output: Contribution to journal › Article › Research › peer-review

  49. 2011
  50. Published

    Comparision of Energy-Based and Damage-Related Fatigue Life Models for Aluminium Components Under TMF Loading

    Eichlseder, W., Winter, G., Gänser, H.-P., Minichmayr, R. & Riedler, M., 2011, Recent Trends in Processing and Degration of Aluminium Alloys. p. 329-346

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  51. Published

    Lifetime optimization of hot forged aerospace components by linking microstructural evaluation and fatigue behaviour

    Maderbacher, H., Gänser, H.-P., Riedler, M., Stoschka, M., Stockinger, M. & Eichlseder, W., 2011, Euro Superalloys 2010. Trans Tech Publications, p. 162-167 (Advanced materials research; vol. 278).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. 2010
  53. Published

    Design of a novel methodology for in-situ-investigation of contact conditions

    Sailer, W., Grün, F., Godor, I. & Gänser, H.-P., 2010, Design of a novel methodology for in-situ-investigation of contact conditions. p. 55-55

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Lifetime evaluation of hot forged aerospace components by linking microstructural evolution and fatigue behaviour

    Maderbacher, H., Christiner, T., Gänser, H.-P., Riedler, M., Stoschka, M. & Eichlseder, W., 2010, In: Procedia Engineering. 2, p. 2269-2276

    Research output: Contribution to journal › Article › Research › peer-review

  55. 2009
  56. Published

    Influence of the peening intensity on the fatigue behavior of shot peened titanium components

    Leitner, H., Oberwinkler, B., Gaenser, H. P. & Stoschka, M., 1 Jan 2009, Fatigue and Fracture Mechanics: 36th Volume. Vol. 1508 STP. p. 134-146 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Link from the microstructure to the fatigue lifteime of forged inconel 718 components

    Maderbacher, H., Gänser, H. P., Riedler, M., Stoschka, M. & Eichlseder, W., 1 Jan 2009, 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 59-60 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Fretting wear: Combined numerical and experimental investigations T.

    Christiner, T., Wohlfahrt, M., Reiser, J., Gänser, H.-P., Godor, I. & Eichlseder, W., 2009, MPA-2009 3rd International Meeting on Developments in Materials, Processes and Applications of Emerging Technologies. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Link from the microstructure to the fatigue lifetime of forged INCONEL 718 components

    Maderbacher, H., Gänser, H.-P., Riedler, M., Stoschka, M. & Eichlseder, W., 2009, 26th DANUBIA-Adria Symposium 2009. p. 59-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    The influence of ageing on fatigue and fracture-related material parameters for an aluminum cast alloy

    Leitgeb, A., Gänser, H.-P., Ehart, R., Fröschl, J. & Eichlseder, W., 2009, 12th International Conference on Fracture (ICF12). p. 189-189

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Virtuelle Produktentwicklung und Lebensdaueroptimierung am Beispiel Getriebeverzahnung

    Haberer, C., Leitner, M., Gänser, H.-P. & Eichlseder, W., 2009, SIMPEP Kongress für Simulation im Produktentwicklungsprozess. p. 30-47

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. 2008
  63. Published

    Engineering estimates in the region of high-cycle fatigue for the fatigue and crack growth behaviour of aluminium alloys

    Leitgeb, A., Jan, M., Gänser, H.-P. & Eichlseder, W., 2008, Engineering estimates in the region of high-cycle fatigue for the fatigue and crack growth behaviour of aluminium alloys. p. 380-388

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Engineering estimates in the region of high-cycle fatigue for the fatigue and crack growth behaviour of aluminium alloys

    Leitgeb, A., Jan, M., Gänser, H.-P. & Eichlseder, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  65. Published

    Experimentelle Untersuchung und Erstelllung eines mesomechanischen Modells zur Ermittlung der Abhängigkeit der Schwingfestigkeit von Stahlguss (42CrMo4) vom Gefüge

    Maderbacher, H., Gänser, H.-P. & Wohlfahrt, M., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  66. Published

    Influence of the Peening Intensity on the Fatigue Behavior of Shot Peened Titanium Components

    Leitner, H., Oberwinkler, B., Gänser, H.-P. & Stoschka, M., 2008, In: Journal of ASTM international. 5, p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Life Time Estimation of Highly Loaded Titanium Components with Regard to Automotive Engineering

    Oberwinkler, B., Leitner, H. & Gänser, H.-P., 2008, 2nd Fatigue Symposium Leoben. p. 67-75

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Some notes on gradient, volumetric and weakest link concepts in fatigue

    Gänser, H.-P., 2008, In: Computational materials science. 44, p. 230-239

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Strength assessment of components subjected to high-cycle fatigue loading: linking the mechanics of materials and structures

    Gänser, H.-P., 2008

    Research output: Thesis › Habilitation thesis › peer-review

  70. Published

    Synthesis of conventional and damage tolerant design concepts

    Jan, M., Gänser, H.-P., Leitgeb, A. & Eichlseder, W., 2008, Synthesis of conventional and damage tolerant design concepts. p. 411-430

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. 2007
  72. Published

    Computation of a modified Haigh-Goodman diagram for damage tolerant design for infinite fatigue life

    Gänser, H.-P., 2007, In: Proceedings of the Institution of Mechanical Engineers / C (Part C, Journal of mechanical engineering science). 221, p. 619-623

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Neuere Berechnungssätze für die betriebsfeste Auslegung von Gussbauteilen in Leichtbauweise

    Fröschl, J., Gänser, H.-P., Gerstmayr, G. & Eichlseder, W., 2007, In: Gießerei-Rundschau. p. 222-230

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Oberflächenbehandlung durch Kugelstrahlen und Festwalzen

    Leitner, H., Gänser, H.-P. & Eichlseder, W., 2007, In: Materialprüfung. p. 408-413

    Research output: Contribution to journal › Article › Research › peer-review

  75. 2006
  76. Published

    Bruchmechanische Aspekte der Schwingfestigkeit

    Gänser, H.-P., 2006, 1. Leobener Betriebsfestigkeitstagung. p. 19-30

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Dimensioning against fatigue – stress-based approach or fracture mechanics?

    Gänser, H.-P., Glinsner, K. & Eichlseder, W., 2006, In: Proceedings of the Institution of Mechanical Engineers / C (Part C, Journal of mechanical engineering science). 220, p. 1109-1120

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Enhanced Fatigue Life by Mechanical Surface Treatments – Experiment and Simulation

    Gänser, H.-P., Godor, I., Leitner, H. & Eichlseder, W., 2006, Fracture of Nano and Engineering Materials and Structures. Springer, p. 205-206

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    Steigerung der Schwingfestigkeit von Maschinenelementen durch innovative Oberflächenbehandlungen

    Leitner, H., Waggermayer, M., Gänser, H.-P. & Reithofer, G., 2006, Schwingfestigkeit von Maschinenelementen durch innovative Oberflächenbehandlungen. p. 31-43

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. 2005
  81. Published

    Abschätzung der tolerierbaren Oxidhautgrößen in schwingend belasteten Druckgussbauteilen

    Fagschlunger, C., Eichlseder, W., Sonsino, C., Poetter, K., Brune, M. & Gänser, H.-P., 2005, In: Gießerei-Rundschau. p. 60-66

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    A comparison of two experimental methods for assessing the influence of initial defects on fatigue life

    Gänser, H.-P., Godor, I., Eichlseder, W., Pippan, R., Ofner, R. & Vollgger, R., 2005, A comparison of two experimental methods for assessing the influence of initial defects on fatigue life. Eigenverlag, p. 500-500

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

View graph of relations

Latest Research Output

View more (62)