Gregor Karl Mori
Research output
- 2024
- Published
Assessing the hydrogen embrittlement susceptibility of an existing L360NB natural gas pipeline steel for 100 % hydrogen transport
Ahmed Hamed Mahmoud Eid Gouda, A. H. M. E. G., Posch-Peperkorn, C., Maierhofer, J., Beschliesser, M., Fink, S. & Mori, G. K., 19 Dec 2024, In: Corrosion science. 244.2025, March, 11 p., 112648.Research output: Contribution to journal › Article › Research › peer-review
- Published
In situ mapping of elemental dissolution at ultra-trace levels during aqueous corrosion of Al alloys
Wagner, S., Mukhametzianova, G., Eskinja, M., Moshtaghi, M., Mori, G. & Prohaska, T., 4 Jul 2024.Research output: Contribution to conference › Poster › Research › peer-review
- E-pub ahead of print
Hydrogen diffusivity, uptake and embrittlement of solution annealed and cold deformed austenitic stainless steel 1.4435 at hydrogen pressures up to 1000 bar and 200 °C
Eichinger, M., Pengg, J., Zwittnig, D. & Mori, G. K., 17 Jun 2024, (E-pub ahead of print) In: Corrosion science. 235.2024, 15 July, 16 p., 112219.Research output: Contribution to journal › Article › Research › peer-review
- Published
Influence of Mo carbides and two-stage tempering methodology on the susceptibility of medium carbon martensitic steel to hydrogen embrittlement
Eskinja, M., Winter, G., Schnideritsch, H., Klarner, J., Razumovskiy, V. I., Moshtaghi, M. & Mori, G. K., 14 Jun 2024, In: Engineering Failure Analysis. 163.2024, Part B, September, 17 p., 108562.Research output: Contribution to journal › Article › Research › peer-review
- Published
Hydrogen uptake and embrittlement of steels under highest pressures
Eichinger, M. & Mori, G. K., 23 May 2024.Research output: Contribution to conference › Poster › Research
- E-pub ahead of print
Peculiarity of hydrogen absorption in duplex steels: Phase-selective lattice swelling and stress evolution
Pogrielz, T., Eichinger, M., Weiser, A., Todt, J., Hohenwarter, A., Ascii, A., Sarac, B., Brandl, D., Ressel, G., Jary, M., Dlouhý, A., Mori, G. K. & Keckes, J., 27 Apr 2024, (E-pub ahead of print) In: Scripta Materialia. 248.2024, 15 July, 7 p., 116142.Research output: Contribution to journal › Article › Research › peer-review
- Published
Mapping elemental solutes at sub-picogram levels during aqueous corrosion of Al alloys using diffusive gradients in thin films (DGT) with LA-ICP-MS
Mukhametzianova, G., Wagner, S., Eskinja, M., Moshtaghi, M., Mori, G. K. & Prohaska, T., 16 Apr 2024, In: Analytical and bioanalytical chemistry. 416.2024, June, p. 3373–3388 16 p.Research output: Contribution to journal › Article › Research › peer-review
- E-pub ahead of print
Investigations on the hydrogen embrittlement tendency of K55 for underground storage applications using hollow probe specimens
Eichinger, M., Zwittnig, D. & Mori, G. K., 19 Mar 2024, (E-pub ahead of print) In: Materials letters. 364.2024, 1 June, 5 p., 136330.Research output: Contribution to journal › Letter › peer-review
- Published
On the applicability of carbon steels K55 and L80 for underground hydrogen storage
Loder, B., Bhosale, S., Eichinger, M., Mori, G. K., Rokosz, K., Fournier, C., Réveillère, A., Bulidon, N., Moli-Sanchez, L. & Mendibide, C., 22 Feb 2024, In: International Journal of Hydrogen Energy . 56.2024, 22 February, p. 232-241 10 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
The Hydrogen Uptake of L360 Pipeline in Varied H2 Environments
Gouda, A. H. M. E. & Mori, G. K., 2024.Research output: Contribution to conference › Poster › Research
- 2023
- E-pub ahead of print
On the hydrogen uptake of line pipe steels L80 and P110 under gaseous hydrogen charging up to 1000 bar and 200 ◦C
Eichinger, M., Pengg, J., Raab, S. & Mori, G. K., 21 Nov 2023, (E-pub ahead of print) In: International Journal of Hydrogen Energy . 50.2024, Part A, 2 January, p. 388-399 12 p.Research output: Contribution to journal › Article › Research › peer-review
- E-pub ahead of print
From unlikely pairings to functional nanocomposites: FeTi–Cu as a model system
Schweiger, L., Kiener, D., Burtscher, M., Schafler, E., Mori, G. K., Spieckermann, F. & Eckert, J., 17 Oct 2023, (E-pub ahead of print) In: Materials today advances. 2023, 20, 13 p., 100433.Research output: Contribution to journal › Article › Research › peer-review
- Published
Extending DGT-based chemical imaging to materials science: In situ assessment of aluminium corrosion at high spatial resolution
Mukhametzianova, G., Wagner, S., Moshtaghi, M., Eskinja, M., Mori, G. K. & Prohaska, T., 11 Oct 2023.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Hydrogen trapping at micro/nano-sized secondary hardening precipitates in high-strength martensitic stainless steels
Pichler, S., Mori, G. K., Safyari, M. & Moshtaghi, M., 31 Aug 2023, ICSI2023.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Influence of Mo content on susceptibility of medium carbon martensitic steels to hydrogen embrittlement
Eskinja, M., Winter, G., Klarner, J., Schnideritsch, H., Mori, G. K. & Moshtaghi, M., 30 Aug 2023, ICSI2023.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Inhibition of grain growth by pearlite improves hydrogen embrittlement susceptibility of the ultra-low carbon ferritic steel: the influence of H-assisted crack initiation and propagation mechanisms
Pichler, S., Bendo, A., Mori, G. K., Safyari, M. & Moshtaghi, M., 29 Aug 2023, In: Journal of materials science. 58.2023, September, p. 13460 13475 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
On the Change in Hydrogen Diffusion and Trapping Behaviour of Pearlitic Rail Steel at Different Stages of Production
Eichinger, M., Loder, B., Tkadletz, M., Schnideritsch, H., Klösch, G. & Mori, G. K., 23 Aug 2023, In: Materials. 16.2023, 17, 15 p., 5780.Research output: Contribution to journal › Article › Research › peer-review
- Published
Hydrogen resistance and trapping behaviour of a cold-drawn ferritic-pearlitic steel wire
Truschner, M., Pengg, J., Loder, B., Köberl, H., Gruber, P., Moshtaghi, M. & Mori, G. K., Jun 2023, In: International Journal of Materials Research. 114.2023, 6, p. 439-452 14 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Hydrogen Applicability of Steels in Gas Storage Facilities
Bhosale, S., Moshtaghi, M. (Co-editor) & Mori, G. K. (Co-editor), 11 May 2023, p. 1. 1 p.Research output: Contribution to conference › Poster › Research
- Published
On the hydrogen uptake of line pipe steels L80 and P110 under gaseous hydrogen charging up to 1000 bar and 200 °C
Eichinger, M. & Mori, G. K., 11 May 2023.Research output: Contribution to conference › Poster › Research
- Published
The effect of HPAM polymer for enhanced oil recovery on corrosion behaviour of a carbon steel and interaction with the inhibitor under simulated brine conditions
Moshtaghi, M., Eskinja, M., Mori, G. K., Grießer, T., Safyari, M. & Cole, I., 22 Mar 2023, In: Corrosion science. 217.2023, June, 20 p., 111118.Research output: Contribution to journal › Article › Research › peer-review
- Published
On The Applicability Of Welded J55 Line Pipe Steel For Underground Hydrogen Storage
Loder, B., Mori, G. K., Klarner, J., Fiedler, M. & Willidal, T., 20 Mar 2023, AMPP Annual Conference & Expo 2023: Paper No. 19131. 15 p. 19131Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
The Interaction of Quaternary Ammonium Compounds based Corrosion Inhibitor with Carbon Steel in CO2 Saturated NaCl Solution
Eskinja, M., Moshtaghi, M., Mori, G. K., Hönig, S. & Zehethofer, G., 20 Mar 2023, p. 1. 11 p.Research output: Contribution to conference › Paper › peer-review
- E-pub ahead of print
Hydrogen embrittlement characteristicsin cold-drawn high-strength stainless steel wires
Truschner, M., Kroll, R., Eichinger, M., Keplinger, A., Engelberg, D. L. & Mori, G. K., 13 Mar 2023, (E-pub ahead of print) In: Corrosion science. 216.2023, 15 May, 111109.Research output: Contribution to journal › Article › Research › peer-review
- E-pub ahead of print
Corrosion of 1.4016 Ferritic Steel by Urea at High Temperature
Galakhova, A., Kadisch, F., Mori, G. K., Heyder, S., Wieser, H., Sartory, B., Wosik, J., Schwarz, S. & Burger, S., 9 Mar 2023, (E-pub ahead of print) In: Journal of Materials Engineering and Performance. 32.2023, October, p. 9153–9162 10 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Diffusive gradients in thin films (DGT) combined with LA-ICP-MS for elemental mapping of localised Aluminium corrosion
Mukhametzianova, G., Wagner, S., Moshtaghi, M., Eskinja, M., Mori, G. K. & Prohaska, T., 31 Jan 2023.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Mechanisms of hydrogen absorption, trapping and release during galvanostatic anodization of high-strength aluminum alloys
Safyari, M., Mori, G. K., Ucsnik, S. & Moshtaghi, M., Jan 2023, In: Journal of Materials Research and Technology. 22.2023, January-February, p. 80-88 9 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Repurposing an Existing Natural Gas Pipeline for 100% Hydrogen Transport
Hamed Mahmoud Eid Gouda, A., Moshtaghi, M. & Mori, G. K., 2023.Research output: Contribution to conference › Poster › Research
- Published
Repurposing Natural Gas Pipelines for 100% Hydrogen Transport
Hamed Mahmoud Eid Gouda, A., Moshtaghi, M. & Mori, G. K., 2023.Research output: Contribution to conference › Poster › Research
- 2022
- Published
Cyclic voltammetric analysis of copper dissolution in acidic chloride electrolytes containing copper ions
Körbler, N., Mori, G. K., Gerold, E., Antrekowitsch, H., Klocek, J. & Krivec, T., 14 Nov 2022. 18 p.Research output: Contribution to conference › Paper › peer-review
- E-pub ahead of print
Effect of cold deformation on the stress corrosion cracking resistance of a high-strength stainless steel
Truschner, M., Janda, A., Bodner, S. C., Keplinger, A. & Mori, G. K., 6 Nov 2022, (E-pub ahead of print) In: Journal of materials science. 57.2022, November, p. 20447–20461 15 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Hydrogen Storage in Porous Metalhydrid - Polymer Hybride Materials
Schweiger, L., Spieckermann, F., Kiener, D., Mori, G. K. & Eckert, J., 27 Sept 2022.Research output: Contribution to conference › Poster › Research
- Published
In situ mapping of localised aluminium corrosion using Diffusive Gradients in Thin films (DGT) coupled to LA-ICP-MS
Mukhametzianova, G., Wagner, S., Moshtaghi, M., Eskinja, M., Mori, G. K. & Prohaska, T., 6 Sept 2022.Research output: Contribution to conference › Poster › Research › peer-review
- Published
The influence of microstructure on hydrogen-assisted fracture in high-strength aluminum alloys
Moshtaghi, M., Safyari, M., Hojo, T., Mori, G. K. & Kuramoto, S., 29 Aug 2022, The influence of microstructure on hydrogen-assisted fracture in high-strength aluminum alloys. 36800Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- E-pub ahead of print
High temperature corrosion behavior of alloys in reducing HCL and H2S containing atmospheres: Thermodynamical and experimental assessment
Nimmervoll, M., Mori, G. K., Bucher, E., Hönig, S. & Haubner, R., 3 Aug 2022, (E-pub ahead of print) In: Materials and Corrosion. 73.2022, 12, p. 1979-2003 25 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Combined thermal desorption spectroscopy, hydrogen visualization, HRTEM and EBSD investigation of a Ni–Fe–Cr alloy: The role of hydrogen trapping behavior in hydrogen-assisted fracture
Moshtaghi, M., Safyari, M. & Mori, G. K., 19 Jul 2022, In: Materials Science and Engineering A. 848.2022, 19 July, 10 p., 143428.Research output: Contribution to journal › Article › Research › peer-review
- Published
Hydrogen Storage in Porous Metalhydrid - Polymer Hybride Materials
Schweiger, L., Spieckermann, F., Kiener, D., Mori, G. K. & Eckert, J., 19 Jul 2022.Research output: Contribution to conference › Poster › Research
- Published
Hydrogen trapping and desorption affected by ferrite grain boundary types in shielded metal and flux-cored arc weldments with Ni addition
Moshtaghi, M., Loder, B., Safyari, M., Willidal, T., Hojo, T. & Mori, G. K., 18 May 2022, In: International Journal of Hydrogen Energy . 47, 47, p. 20676-20683 8 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
High-temperature corrosion of austenitic alloys in HCl and H2S containing atmospheres under reducing conditions
Nimmervoll, M., Mori, G. K., Hönig, S. & Haubner, R., 15 May 2022, In: Corrosion science. 200.2022, May, 17 p., 110214.Research output: Contribution to journal › Article › Research › peer-review
- Published
Investigation of the effects of temperature and exposure time on the corrosion behavior of a ferritic steel in CO2 environment using the optimized linear polarization resistance method
Eškinja, M., Moshtaghi, M., Hönig, S., Zehethofer, G. & Mori, G. K., 30 Apr 2022, In: Results in Materials. 14.2022, June, 8 p., 100282.Research output: Contribution to journal › Article › Research › peer-review
- Published
Wasserstoffspeicherung in porösen Metallhydrid Polymer Hybridmaterialien
Schweiger, L., Spieckermann, F., Kiener, D., Mori, G. K. & Eckert, J., 20 Apr 2022.Research output: Contribution to conference › Poster › Research
- Accepted/In press
Influence Of Cold Deformation On Hydrogen Embrittlement By Determining The Critical Hydrogen Concentration In High Strength Steel For Wire Applications
Truschner, M., Deutsch, J. (Co-editor), Pengg, J. (Co-editor), Mori, G. K. (Co-editor), Köberl, H. (Co-editor) & Gruber, P. J. (Co-editor), 8 Mar 2022, (Accepted/In press).Research output: Contribution to conference › Paper › peer-review
- Published
Hydrogen absorption rate and hydrogen diffusion in a ferritic steel coated with a micro- or nanostructured ZnNi coating
Moshtaghi, M., Safyari, M. & Mori, G., Jan 2022, In: Electrochemistry Communications. 134.2022, January, 6 p., 107169.Research output: Contribution to journal › Article › Research › peer-review
- Published
Hydrogen Charging of Armco iron and L80 steel in various Electrolytes
Eichinger, M., Truschner, M., Zwittnig, D., Trautmann, A. & Mori, G. K., 2022. 11 p.Research output: Contribution to conference › Paper › peer-review
- Published
InnoBLA III: Auswirkungen der thermischen Bodenbehandlung auf die Mobilität von Schwermetallen und die Korrosion von Heizlanzen
Sattler, T. M., Vollprecht, D., Mori, G. K., Berrer, I., Kern, J. & Riedl, J., 2022, Recy&DepoTech 2022: POSTER-Konferenzband. p. 63-66Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- 2021
- Published
High-temperature high-pressure SCC testing of corrosion-resistant alloys
Galakhova, A., Mori, G. K. & Prattes, K., 3 Dec 2021, In: Materials and Corrosion. 72, 12, p. 1831-1842 12 p.Research output: Contribution to journal › Review article › peer-review
- Published
Corrosion of N10276 in a H2S, HCl, and CO2 Containing Atmosphere at 480 °C and 680 °C
Nimmervoll, M., Mori, G. K., Bucher, E., Schmid, A. & Haubner, R., 12 Nov 2021, In: Metals. 11.2021, 11, 13 p., 1817.Research output: Contribution to journal › Article › Research › peer-review
- Published
Parameter optimization for electropolishing of molybdenum in sulfuric acid
Eichinger, M. & Mori, G. K., 20 Sept 2021. 1 p.Research output: Contribution to conference › Poster › Research
- Published
The Basics of Hydrogen Uptake in Iron and Steel
Truschner, M., Trautmann, A. & Mori, G. K., 10 Sept 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 166.2021, 9, p. 443-449 7 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Hydrogen Embrittlement of Steels in High Pressure H2 Gas and Acidified H2S-saturated Aqueous Brine Solution
Trautmann, A., Mori, G. K. & Loder, B., 6 Sept 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 166.2021, 9, p. 450-457 8 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Corrosion of Stainless Steel by Urea at High Temperature
Galakhova, A., Kadisch, F., Mori, G. K., Heyder, S., Wieser, H., Sartory, B. & Burger, S., 30 Aug 2021, In: Corrosion and materials degradation. 2.2021, 3, p. 461-473 13 p.Research output: Contribution to journal › Article › Research › peer-review
- E-pub ahead of print
Effect of Varying H2S Content on High-Temperature Corrosion of Ferritic and Austenitic Alloys in a Simulated Pyrolysis Process of Post-Consumer Plastics
Nimmervoll, M., Mori, G. K., Bucher, E., Hönig, S. & Haubner, R., 29 Jun 2021, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 166.2021, 9, p. 424-433 10 p.Research output: Contribution to journal › Article › Research
- Published
Surface sulphide formation on high-temperature corrosion resistant alloys in a H2S-HCl-CO2 mixed atmosphere
Nimmervoll, M., Schmid, A., Mori, G. K., Hönig, S. & Haubner, R., 1 Apr 2021, In: Corrosion science. 181.2021, 1 April, 11 p., 109241.Research output: Contribution to journal › Article › Research › peer-review
- Published
Behavior of high-temperature corrosion resistant alloys in HCl and H2S containing atmospheres
Nimmervoll, M., Mori, G. K., Hönig, S. & Haubner, R., 2021.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Galvanic corrosion of molybdenum alloys and oxides in contact with copper for thin film transistors using evans diagrams
Riedl, J., Mori, G., Schmidt, H. & Köstenbauer, H., 2021, In: Digest of technical papers. 52, S2, p. 588-590 3 p.Research output: Contribution to journal › Conference article › peer-review
- 2020
- Published
Cathodic and Anodic Stress Corrosion Cracking of a New High-Strength CrNiMnMoN Austenitic Stainless Steel
Truschner, M., Deutsch, J., Mori, G. K. & Keplinger, A., 19 Nov 2020, In: Metals : open access journal . 10.2020, 11, 12 p., 1541.Research output: Contribution to journal › Article › Research › peer-review
- Published
Metallographic Documentation of the Degradation of Iron and Nickel Based Alloys in HCl and H2S Containing Environments, between 480 – 680 °C
Schmid, A., Mori, G. K. & Haubner, R., 16 Nov 2020, Defect and diffusion forum. 405 ed. Vol. 2020. p. 26-32 7 p. (Defect and diffusion forum (Online-Ressource) ).Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
- Published
Hochtemperaturkorrosion an Stählen und Nickelbasislegierungen in HCl und H2S haltiger Mischgasatmosphäre
Haubner, R., Nimmervoll, M., Schmid, A. & Mori, G. K., 4 Nov 2020, Tagungsband 3-Länder-Korrosionstagung. Frankfurt/Main, 10 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Depassivation and repassivation of stainless steels by stepwise pH change
Mujanović, E., Zajec, B., Legat, A., Kosec, T., Kovač, J., Mori, G., Hönig, S. & Zehethofer, G., 2 Oct 2020, In: Materials and Corrosion. 72.2021, 3, p. 421-433 13 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Cycled hydrogen permeation through Armco iron – A joint experimental and modeling approach
Drexler, A., Siegl, W., Ecker, W., Tkadletz, M., Klösch, G., Schnideritsch, H., Mori, G. K., Svoboda, J. & Fischer, F.-D., 23 Sept 2020, In: Corrosion science. 176.2020, November, 11 p., 109017.Research output: Contribution to journal › Article › Research › peer-review
- Published
Resistance to stress corrosion cracking of a new high strength stainless steel wire material
Truschner, M., Trautmann, A. (Co-editor), Deutsch, J. (Co-editor), Mori, G. K. (Co-editor) & Keplinger, A. (Co-editor), 7 Sept 2020.Research output: Contribution to conference › Poster › Research
- Published
Hydrogen Uptake and Embrittlement of Carbon Steels in Various Environments
Trautmann, A., Mori, G., Oberndorfer, M., Bauer, S., Holzer, C. & Dittmann, C., 14 Aug 2020, In: Materials. 13.2020, 16, 16 p., 3604.Research output: Contribution to journal › Article › Research › peer-review
- Published
Effect of Polishing on Electrochemical Behavior and Passive Layer Composition of Different Stainless Steels
Rokosz, K., Solecki, G., Mori, G., Fluch, R., Kapp, M. & Lahtinen, J., 1 Aug 2020, In: Materials. 13.2020, 15, 12 p., 3402.Research output: Contribution to journal › Article › Research › peer-review
- Published
Hydrogen Uptake of Duplex 2205 at H2 Partial Pressures up to 100 bar
Trautmann, A., Mori, G. K., Siegl, W., Truschner, M., Pfeiffer, J., Kapp, M., Keplinger, A., Oberndorfer, M. & Bauer, S., Jan 2020, In: Berg- und hüttenmännische Monatshefte : BHM. 165.2020, 1, p. 40-45 6 p.Research output: Contribution to journal › Article › Research › peer-review
- 2019
- Published
Activation and Repassivation of Stainless Steels in Artificial Brines as a Function of pH
Mujanovic, E., Zajec, B., Kosec, T., Legat, A., Hönig, S., Zehethofer, G. & Mori, G., 20 Nov 2019, In: Materials. 12.2019, 23, 11 p., 3811.Research output: Contribution to journal › Article › Research › peer-review
- Published
Hydrogen Uptake of Duplex 2205 at H2 partial pressures up to 100 bar
Trautmann, A., Mori, G., Siegl, W., Truschner, M., Pfeiffer, J., Kapp, M., Keplinger, A., Oberndorfer, M. & Bauer, S., 30 Sept 2019, p. 338-345. 8 p.Research output: Contribution to conference › Paper › peer-review
- Published
Hydrogen charging of Armco Iron and L80 Steel in various electrolytes
Truschner, M., Trautmann, A., Siegl, W. & Mori, G. K., 9 Sept 2019.Research output: Contribution to conference › Poster › Research
- Published
High Temperature Corrosion of Steel X15CrNiSi25-21 (1.4841) in a Mixed Gas Atmosphere – Sample Preparation and Damage Mechanism
Schmid, A., Mori, G., Hönig, S., Strobl, S. & Haubner, R., 3 Jul 2019, In: Praktische Metallographie/Practical Metallography. 56.2019, 7, p. 457-468 12 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Hydrogen trapping in heat treated and deformed Armco iron
Siegl, W., Mori, G. K., Ecker, W., Klarner, J., Klösch, G., Winter, G., Schnideritsch, H. & Drexler, A., 24 Mar 2019. 12 p.Research output: Contribution to conference › Paper
- Published
Susceptibility of Selected Steel Grades to Hydrogen Embrittlement - Simulating Field Conditions by Performing Laboratory Wheel Tests With Autoclaves
Trautmann, A., Mori, G. K., Oberndorfer, M. & Bauer, S., Mar 2019. 10 p.Research output: Contribution to conference › Paper › peer-review
- Published
The influence of NaCl and CaCl2 induced high temperature corrosion on the aqueous corrosion resistance of stainless steels
Mori, G., Vidic, K. J., Bucher, E., Yasir, M., Hornauer, D., Nachtnebel, M., Fitzek, H. & Schroettner, H., 20 Feb 2019, In: Materials and Corrosion. 70.2019, 6, p. 1071-1086 16 p.Research output: Contribution to journal › Article › Research › peer-review
- 2018
- Published
Model about the course of corrosion reactions of austenitic steels in a H2S, HCl and CO2 containing atmosphere at 680°C
Schmid, A., Mori, G. K., Bucher, E. & Haubner, R., 19 Oct 2018, In: Oxidation of metals. 91.2018, 14 February, 10 p., https://doi.org/10.1007/s11085-018-9876-z.Research output: Contribution to journal › Article › Research › peer-review
- Published
Corrosion behaviour of Fe and Ni based alloys in the reactor atmosphere of a thermal cracking process
Schmid, A., Mori, G. K., Haubner, R. & Hönig, S., 10 Sept 2018.Research output: Contribution to conference › Presentation › Research
- Published
Contribution to the Understanding of Hydrogen Trapping in Armco Iron
Siegl, W., Mori, G. K. & Zauchner, T., 29 May 2018.Research output: Contribution to conference › Poster › Research
- Published
Comparison of the high-temperature chloride-induced corrosion between duplex steel and Ni based alloy in presence of H2S
Schmid, A., Mori, G. K., Hönig, S., Weil, M., Strobl, S. & Haubner, R., 5 May 2018, In: Corrosion science. 139, 15 July 2018, p. 76 - 82 6 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
NaCl and CaCl2-induced high temperature corrosion of automotive exhaust components
Vidic, K. & Mori, G. K., 15 Apr 2018, p. 1-15. 15 p.Research output: Contribution to conference › Paper › peer-review
- Published
Behaviour of S31400 and S32205 steels in HCl- and H2S-containing gas atmospheres under a low oxygen partial pressure between 480 – 680 °C
Schmid, A., Mori, G. K., Haubner, R., Weil, M. & Hönig, S., 27 Feb 2018, In: Materials and Corrosion. DOI: 10.1002/maco.201709992, p. 1328 - 1337Research output: Contribution to journal › Article › Research › peer-review
- Published
Ungewöhnliche Rissbildung an einem Autoklaven bei Versuchen zum thermischen Cracken von anthropogenen Ressourcen
Schmid, A., Mori, G. K., Strobl, S. & Haubner, R., 18 Jan 2018, In: Practical metallography = Praktische Metallographie. Vol. 55, 4, p. 244-253Research output: Contribution to journal › Article › Research › peer-review
- Published
Corrosion behaviour of Fe and Ni based alloys in the reactor atmosphere of a thermal cracking process
Schmid, A., Mori, G., Hönig, S. & Haubner, R., 1 Jan 2018, European Corrosion Congress, EUROCORR 2018. p. 44-58 15 p. (European Corrosion Congress, EUROCORR 2018).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- 2017
- Published
Depletion zones and intergranular corrosion of superaustenitic stainless steel Alloy 926
Mori, G. K., Prohaska, M., Lackner, R., Rokosz, K., Albu, M. & Kothleitner, G., 1 Mar 2017, In: Materials and Corrosion. 68.2017, 3, p. 284-294 11 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Corrosion of various Fe and Ni based alloys in HCl, H2S containing environments, with low oxygen partial pressure, at 680 °C
Alexander, S., Mori, G., Strobl, S., Haubner, R. & Hönig, S., 1 Jan 2017.Research output: Contribution to conference › Paper › peer-review
- Published
UNS S31400 stainless steel as reactor material in a thermal cracking process
Schmid, A. & Mori, G., 1 Jan 2017, Corrosion Conference and Expo 2017. p. 3053-3062 10 p. (NACE - International Corrosion Conference Series; vol. 5).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- 2016
- Published
Corrosion Behavior Influenced by Quenching Conditiones of HTGN Martensitic Stainless Steel
Borchert, M., Mori, G., Kozeschnik, E., Povoden-Karadeniz, E., Bischof, M. & Tomandl, A., 28 Sept 2016.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Hydrogen embrittlement of high strength steel under in situ corrosive charging conditions and tensile load
Scharf, R., Muhr, A., Stellnberger, K.-H., Faderl, J., Holzer, C. & Mori, G. K., 21 Jun 2016, In: Materials and Corrosion. 68.2017, 1, p. 95-104 10 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Aufstickung und Korrosionsverhalten martensitischer rostfreier Stähle
Borchert, M. & Mori, G., 11 May 2016.Research output: Contribution to conference › Presentation › Research
- Published
Spannungsrisskorrosionsprüfung von Hochfesten Stählen in der Befestigungstechnik
Borchert, M., Mori, G., Bischof, M. & Tomandl, A., 8 Apr 2016.Research output: Contribution to conference › Poster › Research
- Published
Hydrogen embrittlement of DP-1000 flat steel sheet: Influence of mechanical properties, specimen geometry, pre-damaging and electrolytically zinc galvanizing
Scharf, R., Muhr, A., Luckeneder, G. H., Larour, P., Mraczek, K., Rehrl, J., Leomann, F., Stellnberger, K.-H., Faderl, J. & Mori, G. K., 1 Mar 2016, In: Materials and Corrosion. 67.2016, 3, p. 239-250 12 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Influence of different types of localized corrosion on the fatigue behavior of an austenitic stainless steel
Visser, A., Mori, G., Pippan, R., Kapp, M., Fluch, R., Leitner, H., Panzenböck, M. & Holper, B., 1 Jan 2016, NACE International - Corrosion Conference and Expo 2016. p. 3201-3210 10 p. (NACE - International Corrosion Conference Series; vol. 4).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
3D Atom Probe Characterisation of Passive Layers on Stainless Steels
Mori, G., Visser, A., Turk, C., Mendez Martin, F., Kapp, M., Fluch, R. & Leitner, H., 2016.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Die Angst des Maschinenbauers vor der Chemie
Mori, G., 2016.Research output: Contribution to conference › Presentation › Education
- Published
EVALUATION OF PERFORMANCE OF AN AMINE BASED AND AN IMIDAZOLINE BASED GAS AND GAS CONDENSATE INHIBITOR
Mori, G., 2016.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Improvement of oxidation and corrosion resistance of Mo thin films by alloying with Ta
Hofer-Roblyek, A. M., Mori, G., Fian, A., Winkler, J. & Mitterer, C., 2016, In: Thin solid films. 599, p. 1-6 6 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Spannungsrisskorrosion an Türhaltern aus hochfestem Aluminium
Mori, G., 2016.Research output: Contribution to conference › Presentation › Research
- 2015
- Published
Effect of high temperature nitrding on corrosion properties of martensitic stainless steels
Borchert, M. & Mori, G., 4 Sept 2015.Research output: Contribution to conference › Presentation › Research
- Published
Evaluation of Performance of an Amine Based and an Imidazoline Based Gas Condensate Inhibitor Tested with a High Velocity Laboratory Test Rig
Prethaler, A., Mori, G. & Rosenberg, E., 2 Jul 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160.2015, 7, p. 346-351 6 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Evaluation of Performance of an Amine Based and an Imidazoline Based Gas and Gas Condensate Inhibitor Tested With High Velocity Laboratory Test Rig
Prethaler, A., Mori, G., Havlik, W., Zehethofer, G., Hönig, S., Rosenberg, E. & Rückemann, M., 15 Mar 2015, p. Paper Number: NACE-2015-5713. 12 p.Research output: Contribution to conference › Paper › peer-review
- Published
Assessing hydrogen susceptibility of press-hardened & high strength steels using various testing methods
Muhr, A., Kolnberger, S., Zwettler, F., Luckeneder, G., Faderl, J., Stellnberger, K. H., Mori, G. & Kurz, T., 1 Jan 2015, European Corrosion Congress, EUROCORR 2015. ASMET, 1 p. (European Corrosion Congress, EUROCORR 2015; vol. 2).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Corrosion in a thermal cracking process
Schmid, A. & Mori, G., 1 Jan 2015, European Corrosion Congress, EUROCORR 2015. ASMET, 1 p. (European Corrosion Congress, EUROCORR 2015; vol. 2).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Corrosion resistance of hot-dip galvanised steel in soils
Ziebermayr, S., Fleischanderl, M., Stellnberger, K. H., Linhardt, P. & Mori, G., 1 Jan 2015, European Corrosion Congress, EUROCORR 2015. ASMET, 1 p. (European Corrosion Congress, EUROCORR 2015; vol. 3).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Influence of different heat treatments on sensitization of alloy 625
Mori, G., Lackner, R., Winter, F., Rinner, H. & Egger, R., 1 Jan 2015, European Corrosion Congress, EUROCORR 2015. ASMET, 1 p. (European Corrosion Congress, EUROCORR 2015; vol. 2).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution