Christof Sommitsch

(Former)

1 - 100 out of 129Page size: 100

Research output

  1. 2024
  2. E-pub ahead of print

    Mapping electro-vortex flow patterns from tornado to inverted tornado in a hemispherical container

    Abdi, M., Karimi Sibaki, E., Sommitsch, C., Barati, H., Al Nasser, M., Wu, M., Teplyakov, I. & Kharicha, A., 12 Jun 2024, (E-pub ahead of print) In: International Journal of Thermofluids. 23.2024, August, 11 p., 100721.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2018
  4. Published

    Guest Editorial - EUROMAT 2017 Symposia on Processing

    Kaban, I., Agathopoulos, S., Valenza, F., Sommitsch, C., Schenk, J., Papaefthymiou, S. & Karantzalis, A., Oct 2018, In: Journal of Materials Engineering and Performance. 27.2018, 10, p. 4981-4982

    Research output: Contribution to journal › Editorial › peer-review

  5. 2014
  6. Published

    Modeling of two-phase grain structure in the titanium alloy TI-6AL-4V using cellular automata

    Krumphals, A., Poletti, C., Warchomicka, F., Stockinger, M. & Sommitsch, C., 2014, In: International journal for multiscale computational engineering. 12, 1, p. 23-31 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Modelling of the ductile damage behaviour of a beta solidifying gamma titanium aluminide alloy during hot-working

    Halici, D., Prodinger, D., Poletti, C., Huber, D., Stockinger, M. & Sommitsch, C., 2014, THERMEC 2013. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Trans Tech Publications, p. 556-561 6 p. (Materials Science Forum; vol. 783-786).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Studies on ductile damage and flow instabilities during hot deformation of a multiphase ã-TiAl alloy

    Halici, D., Zamani, H. A., Prodinger, D., Poletti, C., Huber, D., Stockinger, M. & Sommitsch, C., 2014, Material Forming ESAFORM 2014. Trans Tech Publications, p. 99-105 7 p. (Key Engineering Materials; vol. 611-612).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. 2013
  10. Published

    Modeling of dual-phase grain structure in Ti-6Al-4V during isothermal and non-isothermal heat treatment using cellular automata

    Krumphals, A., Poletti, C., Warchomicka, F., Stockinger, M. & Sommitsch, C., 2013, Recrystallization and Grain Growth V. Trans Tech Publications, p. 353-356 4 p. (Materials Science Forum; vol. 753).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. 2012
  12. Published

    Modeling of grain growth in one and two phase materials by 2D cellular automata

    Sommitsch, C., Krumphals, A., Candic, M., Tian, B. & Stockinger, M., Sept 2012, In: Journal of computational and theoretical nanoscience. 9, 9, p. 1515-1524 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Microstructure control in processing nickel, titanium and other special alloys

    Sommitsch, C., Radis, R., Krumphals, A., Stockinger, M. & Huber, D., Jul 2012, Microstructure Evolution in Metal Forming Processes. Elsevier Ltd, p. 337-383 47 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  14. Published

    Evolution of beta grain size during beta phase processing of Ti-6A1-4V

    Krumphals, A., Stockinger, M., Warchomicka, F. & Sommitsch, C., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 493-496 4 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Influence of temperature and strain rate on dynamic softening processes in Allvac® 718Plus™

    Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Poelt, P., 2012, THERMEC 2011. Trans Tech Publications, p. 2440-2445 6 p. (Materials Science Forum; vol. 706-709).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. 2011
  17. Published

    Comparison between microstructure evolution in IN718 and ATI Allvac® 718PlusTM - Simulation and trial forgings

    Huber, D., Sommitsch, C. & Stockinger, M., 4 Jul 2011, In: Advanced materials research. 278, p. 168-173 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Assessment of dynamic softening mechanisms in Allvac® 718Plus™ by EBSD analysis

    Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Poelt, P., 25 Apr 2011, In: Materials Science and Engineering A. 528, 10-11, p. 3754-3760 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Through-process simulation of aluminium casting A356-simulation of solidification and stress analysis during heat treatment

    Unterreiter, G., Wlanis, T., Ludwig, A., Wu, M., Sommitsch, C. & Mayer, F., 2011, In: International journal of multiphysics. p. 209-217

    Research output: Contribution to journal › Article › Research › peer-review

  20. 2010
  21. Published

    Interaction of the precipitation kinetics of beta and gamma Phases in nickel-base superalloy ati allvac 718Plus TM

    Radis, R., Zickler, G., Stockinger, M., Sommitsch, C. & Kozeschnik, E., 2010, In: Materials Science Forum . p. 2712-2717

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Interaction of the precipitation kinetics of δ and γ' phases in nickel-base superalloy ATI Allvac® 718Plus™

    Radis, R., Zickler, G. A., Stockinger, M., Sommitsch, C. & Kozeschnik, E., 2010, THERMEC 2009. Chandra, T., Chandra, T., Chandra, T., Wanderka, N., Wanderka, N., Wanderka, N., Reimers, W., Reimers, W., Reimers, W., Ionescu, M., Ionescu, M. & Ionescu, M. (eds.). Trans Tech Publications, p. 2712-2717 6 p. (Materials Science Forum; vol. 638-642).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Metadynamic recrystallization of the nickel-based superalloy Allvac 718Plus™

    Sommitsch, C., Huber, D. & Stockinger, M., 2010, THERMEC 2009. Chandra, T., Chandra, T., Chandra, T., Wanderka, N., Wanderka, N., Wanderka, N., Reimers, W., Reimers, W., Reimers, W., Ionescu, M., Ionescu, M. & Ionescu, M. (eds.). Trans Tech Publications, p. 2327-2332 6 p. (Materials Science Forum; vol. 638-642).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Method for a through-process simulation of an aluminium casting

    Unterreiter, G., Ludwig, A., Wu, M., Wlanis, T., Sommitsch, C. & Mayer, F., 2010, Method for a through-process simulation of an aluminium casting. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Modelling the Forming Limit during Cross-Rolling of Seamless Pipes Using a Modified Continuum Damage Mechanics Approach

    Pschera, R., Sommitsch, C. & Klarner, J., 2010, In: Steel research international.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Numerical simulation of the simultaneous precipitation of delta and gamma prime phases in the Ni-base superalloy ATI Allvac 718 Plus

    Radis, R., Zickler, G., Stockinger, M., Sommitsch, C. & Kozeschnik, E., 2010, Numerical simulation of the simultaneous precipitation of delta and gamma prime phases in the Ni-base superalloy ATI Allvac 718 Plus. p. 569-578

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Numerical simulation of the simultaneous precipitation of δ and γ′ phases in the Ni-base superalloy ATI Allvac®718 Plus™

    Radis, R., Zickler, G. A., Stockinger, M., Sommitsch, C. & Kozeschnik, E., 2010, 7th International Symposium on Superalloy 718 and Derivatives 2010. p. 569-578 10 p. (7th International Symposium on Superalloy 718 and Derivatives 2010; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. 2009
  29. Published

    Ansätze für die Bewertung der Formänderungsverhältnisse beim Schrägwalzen

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2009, XXVIII. Verformungskundliche Kolloquium, 28.02-03.03.2009, Planneralm/Donnersbach. p. 215-228

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Modelling of microstructure evolution in hot work tool steels during service

    Krumphals, F., Wlanis, T., Sommitsch, C., Holzer, I., Sonderegger, B. & Wieser, V., 2009, In: Computer methods in materials science. 9, p. 228-233

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Modelling the Critical Conditions for the Rolling of Seamless Pipes

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2009, TMS 2009 Proceedings - Materials Processing and Manufacturing Division.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Modelling the Forming Limit during Cross-Rolling of Seamless Pipes using a Modified Continuum Damage Mechanics Approach

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2009, 3rd International Conference Simuation and Modelling of Metallurgical Processes in Steelmaking. p. 201-209

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Recrystallization and grain growth in the nickel-based superalloy Allvac 718Plus / Dedicated to Professor Dr. Franz Jeglitsch on the occasion of his 75th birthday

    Sommitsch, C., Huber, D., Ingelman-Sundberg, F., Mitsche, S., Stockinger, M. & Buchmayr, B., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 1088-1098

    Research output: Contribution to journal › Article › Research › peer-review

  34. 2008
  35. Published

    Characterization of δ-phase in superalloy Allvac 718Plus™

    Stotter, C., Sommitsch, C., Wagner, J., Leitner, H., Letofsky-Papst, I., Zickler, G. A., Prantl, W. & Stockinger, M., Apr 2008, In: Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques. 99, 4, p. 376-380 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Ausscheidungskinetik während der Homogenisierung und Gefügeentwicklung während der Warmumformung der Aluminiumlegierung AA6082

    Sherstnev, P., Sommitsch, C., Mitsche, S., Hacksteiner, M. & Ebner, T., 2008, XXVII. Verformungskundliches Kolloquium. p. 123-130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Characterisation of the subgrain structure of the aluminium alloy AA6082 after homogenization and hot forming by EBSD

    Mitsche, S., Sherstnev, P., Sommitsch, C., Ebner, T. & Hacksteiner, M., 2008, Characterisation of the subgrain structure of the aluminium alloy AA6082 after homogenization and hot forming by EBSD. p. 579-580

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Characterization of delta-phase in superalloy Allvac 718Plus TM

    Stotter, C., Sommitsch, C., Wagner, J., Leitner, H., Letofsky-Papst, I., Zickler, G., Prantl, W. & Stockinger, M., 2008, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 99, p. 376-380

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Comparison of experimental and Finite Element Modelling of the extrusion of AA6082 on both tools and extrudate as a function of process parameters

    Krumphals, F., Flitta, I., Mitsche, S., Wlanis, T., Jahn, A. & Sommitsch, C., 2008, ESAFORM 2008. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Creep and Fatigue Damage in Hot Work Tools Steels during Copper and Aluminium Extrusion

    Sommitsch, C., Wlanis, T., Hatzenbichler, T. & Riedl, C., 2008, Key engineering materials. p. 169-176 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  41. Published

    Creep fatigue in hot work tool steels during copper extrusion

    Krumphals, F., Wlanis, T., Sommitsch, C., Buchner, B., Huber, D., Redl, C. & Wieser, V., 2008, Sixth International Conference on Low Cycle Fatigue. p. 721-726

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    FEM Modelling of Cross Rolling using Damage Mechanics

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2008, 12th international Conference of Metal Forming, Steel research international, Special Edition, Vol. 1, M. Pietrzyk et al. Eds.. p. 349-356

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Gekoppelte Umform- und Gefügesimulation beim Radial- und Gesenkschmieden

    Harrer, O.-K., Sommitsch, C. & Buchmayr, B., 2008, MEFORM 2008, Simulation von Umformprozessen. Inst. für Metallformung, p. 18-27

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Investigations of retained deformation energy after hot forming and its influence on the abnormal grain growth of the nickel based alloy 80A

    Candic, M., Tian, B., Kleber, S., Mitsche, S. & Sommitsch, C., 2008, TMS 2008. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Lifetime comparison of different hot work tool steels for extrusion tools in aluminium extrusion

    Sommitsch, C., Krumphals, F., Stotter, C., Dendl, D., Wlanis, T., Huber, D. & Redl, C., 2008, Lifetime comparison of different hot work tool steels for extrusion tools in aluminium extrusion. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Lifetime evaluation of two different hot work tool steels in aluminium extrusion

    Sommitsch, C., Sievert, R., Wlanis, T. & Redl, C., 2008, In: Computational materials science. 43, p. 82-91

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Microstructure modeling of the dynamic recrystallization kinetics during turbine disc forging of the nickel based superalloy Allvac 718PlusTM

    Huber, D., Stotter, C., Sommitsch, C., Mitsche, S., Poelt, P., Buchmayr, B. & Stockinger, M., 2008, Superalloys 2008, Roger C. Reed et al. Eds., TMS. p. 855-861

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Microstructure modeling of the dynamic recrystallization kinetics during turbine disc forging of the nickel based superalloy Allvac 718PlusTM

    Huber, D., Stotter, C., Sommitsch, C., Mitsche, S., Poelt, P. & Buchmayr, B., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  49. Published

    Mikrostrukturentwicklung und duktile Schädigung beim Gesenkschmieden

    Sommitsch, C., Harrer, O.-K., Rüf, G. & Buchmayr, B., 2008, Der Pawelski - Umformtechnik im Spannungsfeld zwischen Plastomechanik und Werkstofftechnik. p. 113-123

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  50. Published

    Modellierung der Rekristallisationskinetik während der Warmumformung der Aluminiumlegierung 5083

    Sherstnev, P., Mitsche, S., Sommitsch, C., Melzer, C., Hacksteiner, M. & Ebner, T., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 439-442

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Modellierung und Simulation des Lochbildungsprozesses während des Schrägwalzens unter Nutzung eines Schädigungsmodells in Forge2007

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2008, MEFORM 2008. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Modelling of Structure Evolution during Hot Working of AA5083

    Sherstnev, P., Mitsche, S., Sommitsch, C., Melzer, C., Hacksteiner, M. & Ebner, T., 2008, Aluminium Alloys, Their Physical and Mechanical Properties, J. Hirsch et al. (Eds.). p. 1077-1084

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  53. Published

    Substructure Development of AA6082 during Hot Deformation

    Poletti, C., Sherstnev, P., Schöbel, M. & Sommitsch, C., 2008, Aluminium Alloys, Their Physical and Mechanical Properties, J. Hirsch et al. (Eds.). p. 691-697

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  54. Published

    The effect of the initial rolling temperature on the microstructure evolution during and after hot rolling of AA6082

    Sherstnev, P., Flitta, I., Sommitsch, C., Hacksteiner, M. & Ebner, T., 2008, ESAFORM 2008. p. 395-398

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Untersuchung der rekristallisierten Kornstruktur der Nickelbasislegierung Allvac 718PlusTM durch unterschiedliche Ätzverfahren und Validierung der Ergebnisse mittels EBSD Messungen

    Winter, G., Petschenig, I., Huber, D., Sommitsch, C., Mitsche, S. & Stockinger, M., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  56. Published

    Vergleichende Untersuchungen zum neutralen und reduzierenden Lochen an einem Versuchsschrägwalzwerk

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 418-422

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    δ-phase characterization of superalloy Allvac 718 Plus™

    Sommitsch, C., Stotter, C., Leitner, H., Mitsche, S., Letofsky-Papst, I. & Stockinger, M., 2008, TMS2008 - 137th Annual Meeting and Exhibition Supplemental Proceedings: Materials Processing and Properties. p. 63-68 6 p. (TMS Annual Meeting; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    δ-Phase characterization of superalloy allvac 718 PlusTM

    Sommitsch, C., Stotter, C., Leitner, H., Mitsche, S., Letofsky-Papst, I. & Stockinger, M., 2008, TMS 2008. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. 2007
  60. Published

    A Practical Approach to Preform Design for Different Materials

    Harrer, O.-K., Sommitsch, C., Rüf, G. & Buchmayr, B., 2007, ESAFORM Conference on Material Forming. AIP Press, p. 15-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Combined EBSD, FIB and TEM investigation of the crack behaviour of the nickel based alloy 80A

    Mitsche, S., Pölt, P., Sommitsch, C. & Albu, M., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  62. Published

    Coupled Physical and Numerical Simulation to Optimize Thermo-mechanical Metal Forming Processes

    Sommitsch, C. & Buchmayr, B., 2007, In: Steel research international. 78, p. 740-744

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Crack behaviour of the Nickel based alloy 80A during hot forming

    Mitsche, S., Pölt, P., Sommitsch, C. & Albu, M., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  64. Published

    Creep-fatigue of multi-part container during hot extrusion of copper – Simulation and experimental comparison

    Krumphals, F., Wlanis, T., Sommitsch, C. & Redl, C., 2007, In: Computer methods in materials science. 7, p. 47-53

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Entwicklung der Gefügestruktur und Beurteilung der effektiven Dehnung bei der Warmumformung

    Candic, M., Tian, B., Kelber, S. & Sommitsch, C., 2007, XXVI. Verformungskundliches Kolloquium. p. 151-157

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Experimentelle Validierung von FEM-Rechnungen zur Spannungs- und Temperaturanalyse von Werkzeugen beim Kupfer-Strangpressen

    Krumphals, F., Wlanis, T., Planitzer, F. & Sommitsch, C., 2007, Experimentelle Validierung von FEM-Rechnungen zur Spannungs- und Temperaturanalyse von Werkzeugen beim Kupfer-Strangpressen. p. 65-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    FE-Modelling of the Cross-Rolling-Piercing Process with Discher Discs

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2007, 2nd International Conference Simuation and Modelling of Metallurgical Processes in Steelmaking. p. 313-317

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Finite-Elemente-Analyse der Reibungsbedingungen beim Schrägwalzen mit Diescherscheiben

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2007, Seminar "Rohrherstellung und -verarbeitung. p. 59-69

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Finite-Elemente-Modellierung des Schrägwalzens

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2007, In: Berg- und hüttenmännische Monatshefte : BHM. 152, p. 205-211

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Gekoppelte physikalische und numerische Simulation zur Optimierung von thermo-mechanischen Umformprozessen

    Sommitsch, C. & Buchmayr, B., 2007, Workshop "Moderne thermomechanische Prozessstrategien in der Stahlumformung" (Stahlzentrum VDEh), Düsseldorf. p. 89-99

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    Hot forming and heat treatment simulation in a steel mill

    Redl, C., Tian, B., Wieser, V., Sommitsch, C. & Wlanis, T., 2007, In: Computer methods in materials science. 7, p. 47-53

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Interaction of Recrystallization and Precipitation during Hot Forming of Alloy 80 A

    Sommitsch, C., Pölt, P., Rüf, G., Mitsche, S. & Albu, M., 2007, In: Materials Science Forum . p. 2988-2993

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Investigation of Retained Strains during Multipass Deformation

    Candic, M., Tian, B., Kleber, S., Wiesner, M. & Sommitsch, C., 2007, In: Materials Science Forum . 558-559, p. 485-490

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Modelling of creep fatigue in containers during aluminium and copper extrusion

    Sommitsch, C., Sievert, R., Wlanis, T., Günther, B. & Wieser, V., 2007, In: Computational materials science. 39, p. 55-64

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    On the interaction of ductile damage and materials softening of a Ni-base alloy during hot deformation

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 1146-1155

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    On the retained strain during multipass hot deformation for the austenitic stainless steel 304 L

    Candic, M., Tian, B., Kleber, S., Wießner, M. & Sommitsch, C., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  77. Published

    Optical Surface Analysis of Steel during Hot Compression: A Test to Determine Crack Initiation

    Pschera, R., Winter, G. & Sommitsch, C., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  78. Published

    Recrystallization behaviour of the nickel-based alloy 80 A during hot forming

    Mitsche, S., Poelt, P. & Sommitsch, C., 2007, In: Journal of microscopy. 227, p. 267-274

    Research output: Contribution to journal › Article › Research › peer-review

  79. 2006
  80. Published

    Creep fatigue in extrusion dies - modelling and simulation

    Sommitsch, C., Wlanis, T., Hatzenbichler, T. & Wieser, V., 2006, In: Steel grips : journal of steel and related materials. 4, p. 51-55

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Creep fatigue of multi-part container during hot extrusion of copper - simulation and experimental comparison

    Wlanis, T., Krumphals, F., Sommitsch, C. & Wieser, V., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  82. Published

    Die hoch hinaus wollen

    Sommitsch, C., 2006, In: Wirtschafts-Blatt : Österreichs unabhängige Tageszeitung für Wirtschaft & Finanzen. p. 10-11

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Dynamic recrystallization of NI-base alloys-Experimental results and comparisons with simulations

    Poelt, P., Sommitsch, C., Mitsche, S. & Walter, M., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 306-314

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Ein Stoff für alle Härtefälle

    Harlfinger, J. & Sommitsch, C., 2006, In: Der Standard : Österreichs unabhängige Tageszeitung für Wirtschaft, Politik und Kultur. p. 9-9

    Research output: Contribution to journal › Article › Transfer › peer-review

  85. Published

    Investigation and numerical modelling of extrusion tool life time

    Redl, C., Wieser, V., Sommitsch, C., Wlanis, T., Schützenhöfer, W., Gaudin, S. & Geigges, B., 2006, Proceedings of 7th International Tooling Conference, M. Rosso, M. A. Grande, D. Uguespp (Eds.),. p. 589-596

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Investigations on fracture of a Ni-base alloy at elevated temperatures by continuum damage mechanics

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2006, Proceedings of the 9th International Conference on Material Forming, ESAFORM. p. 175-178

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    Lehrstuhl für Umformtechnik

    Buchmayr, B., Harrer, O.-K. & Sommitsch, C., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 271-275

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Modellierung der duktilen Schädigung einer Nickelbasislegierung unter Berücksichtigung der Werkstoffentfestigung bei der Warmumformung

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2006, XXV. Verformungskundliches Kolloquium,. p. 167-183

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Modellierung der duktilen Schädigung während der Warmumformung

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  90. Published

    Modellierung des Aluminium- und Kupfer-Strangpressens unter dem Aspekt der Lebensdauervorhersage der Werkzeuge und Rezipienten – Teil 2

    Sommitsch, C., Wlanis, T., Krumphals, F. & Planitzer, F., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  91. Published

    Modelling ductile damage of a Ni-base alloy considering the microstructure evolution during hot working

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2006, In: Steel grips : journal of steel and related materials. 4, p. 56-63

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Modelling of creep-fatigue in extrusion dies

    Sommitsch, C., Wlanis, T. & Wieser, V., 2006, XXV. Verformungskundliches Kolloquium. p. 193-203

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    On modelling of dynamic recrystallisation of fcc materials with low stocking fault energy

    Sommitsch, C. & Mitter, W., 2006, In: Acta materialia. p. 357-375

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    On the modelling of the interaction of materials softening and ductile damage during hot working of Alloy 80A

    Sommitsch, C., Pölt, P., Rüf, G. & Mitsche, S., 2006, In: Journal of materials processing technology. 177, p. 282-286

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Quantitative Metallography

    Mitsche, S., Pölt, P. & Sommitsch, C., 2006, In: GIT imaging & microscopy. 1, p. 38-39

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Radial forging of a nickel base alloy at different temperatures

    Harrer, O.-K., Wallner, S., Wieser, V. & Sommitsch, C., 2006, In: Steel grips : journal of steel and related materials. 4, p. 356-360

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Recrystallization behaviour of the nickel based alloy 80A during hot forming

    Mitsche, S., Sommitsch, C., Pölt, P. & Kleber, S., 2006, Proceedings of the 13th Conference and Workshop on Electron Backscatter Diffraction, Royal Microscopical Society (RMS). p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Simulation der Gefügeentwicklung beim Stabwalzen von Rippenstahl

    Sommitsch, C., Fohringer, H., Jahn, A., Stöckl, C. & Buchmayr, B., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 344-349

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Simulation der Temperatur- und Gefügeentwicklung beim Stabwalzen von BSt 550

    Sommitsch, C. & Buchmayr, B., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  100. Published

    Systematische Bestimmung des rekristallisierten Gefügeanteiles einer Nickelbasislegierung in Abhängigkeit vom Verformungsgrad

    Mitsche, S., Sommitsch, C. & Poelt, P., 2006, Sonderbände der praktischen Metallographie. p. 43-50

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  101. 2005
  102. Published

    A fracture mechanics investigation on crack growth in massive forming

    Trattnig, G., Sommitsch, C. & Pippan, R., 2005, In: Materials Science Forum . p. 339-342

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Blechprüfung

    Sommitsch, C. & Buchmayr, B., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  104. Published

    Comparison of fracture criteria at high temperatures for nickel-based alloys

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2005, Steelsim 2005. p. 575-588

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  105. Published

    Development of microstructure in forging alloy 718

    Harrer, O.-K., Sommitsch, C., Wallner, S. & Wieser, V., 2005, Steelsim 2005. p. 463-471

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  106. Published

    Ductile fracture analysis with damage models of effective stresses at high temperatures

    Sommitsch, C. & Rüf, G., 2005, 8th ICTP 2005. p. 327-328

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  107. Published

    Dynamische Rekristallisation von Nickelbasis-Legierungen, Bildanalytische Methoden und EBSD

    Sommitsch, C., Poelt, P., Mitsche, S. & Walter, M., 2005, Sommerschule Steiermark. p. 113-125

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  108. Published

    Entwicklung eines Warmstauchversuchs als Grundlage für die Beschreibung des Schädigungsverhaltens einer Nickel-Basis-Superlegierung

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2005, XXIV. Verformungskundliches Kolloquium. p. 139-155

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  109. Published

    Gefügemodelle für die Warmformgebung

    Sommitsch, C. & Buchmayr, B., 2005, Freiberger Forschungsforum, 56. Berg- und Hüttenmännischer Tag. p. 16-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  110. Published

    Microstructure Simulation in Radial Forging of Nickel Base Alloys

    Harrer, O.-K., Sommitsch, C., Wallner, S. & Wieser, V., 2005, The 8th ESAFORM Conference on Material Forming. p. 515-518

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  111. Published

    On the determination of the recrystallised fraction during hot forming

    Sommitsch, C., Walter, M., Kleber, S., Pölt, P. & Mitsche, S., 2005, In: Steel grips : journal of steel and related materials. 3, p. 287-293

    Research output: Contribution to journal › Article › Research › peer-review

  112. Published

    Optimized rod rolling to achieve desired mechanical properties

    Sommitsch, C., Roveda, M., Gaudenzi, N. & Buchmayr, B., 2005, Steelsim 2005. p. 407-419

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 Next
View graph of relations

Latest Research Output

View more (129)