Departments and Chairs

Organisational unit: Departments and Institutes

1 - 100 out of 33,499Page size: 100

Research output

  1. 2025
  2. Published

    Exploring Nanoparticle and Thin Film Bonding Characteristics onto Carbon Fibers using Atomic Force Microscopy

    Haiden, L., Feuchter, M., Markus, K., Brunner, A. J., Pansare, A. V., Barbezat, M. & Pinter, G., 25 Mar 2025.

    Research output: Contribution to conference › Poster › Research

  3. Published

    Seltene Erden: Eigentlich kein Problem

    Melcher, F., 11 Mar 2025

    Research output: Non-textual form › Digital or Visual Products › Transfer

  4. Published

    Das Anthropozän – Frank Melcher zum ‘Erdzeitalter des Menschen’

    Melcher, F., 10 Mar 2025

    Research output: Non-textual form › Digital or Visual Products › Transfer

  5. Published

    CaCTUS – Carbon Capture & Transformation, Utilization and Storage: CCUS in Österreich – Potenziale, Technologien, Folgenabschätzung und Einordnung der rechtlichen Rahmenbedingungen

    Wolf-Zöllner, P., Böhm, H., Veseli , A., Hochmeister, S., Kulich, J., Fazeni-Fraisl , K., Lehner, M., Kienberger, T., Ott, H., Fleischhacker, J., Sachs, N. & Kapfer, M., 7 Mar 2025, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research

  6. Published

    Wasserstoff als nachhaltiger Energieträger – Dimensionieren im Maschinenbau

    Grun, F., Oberreiter, P. & Renhart, P., 4 Mar 2025, 20. Kraftfahrzeug – Symposium - Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    The Discrete Element Method: Advanced Topics - Unit 6: Flexible Particles and Structures

    Fimbinger, E., 3 Mar 2025

    Research output: Non-textual form › Digital or Visual Products › Transfer

  8. Published

    Unlocking the Value of Electronic Waste: Inter-laboratory Insights into Critical Element Analysis

    Lancaster, S. T., Sahlin, E., Oelze, M., Ostermann, M., Vogl, J., Laperche, V., Touze, S., Ghestem, J. P., Dalencourt, C., Gendre, R., Stammeier, J., Klein, O., Pröfrock, D., Košarac, G., Jotanovic, A., Bergamaschi, L., Di Luzio, M., D'Agostino, G., Jaćimović, R. & Eberhard, M. & 9 others, Feiner, L., Trimmel, S., Rachetti, A., Sara-Aho, T., Roethke, A., Michaliszyn, L., Pramann, A., Rienitz, O. & Irrgeher, J., 3 Mar 2025.

    Research output: Contribution to conference › Poster › Research

  9. Published

    Damping of vibrations of a rod by dissipation due to diffusion

    Svoboda, J., Hackl, K. & Fischer, F.-D., 1 Mar 2025, In: Scripta Materialia. 257.2025, 1 March, 5 p., 116461.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    A Hybrid Update of the Fe-Si System by DSC, Thermodynamic Modeling and Statistical Learning from Ladle Refining Data of Electrical Steels

    Bernhard, M. C., Kavic, D., Presoly, P., Wi, T.-G., Park, W.-B., Rössler, R., Jungreithmeier, A., Ilie, S., Bernhard, C. & Kang, Y.-B., 26 Feb 2025, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 56

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Assessment of measures to reduce corporate carbon emissions along the production and energy processes

    Feichtinger, G., Mark, D. & Posch, W., 26 Feb 2025, Organisation und Dynamik von Energiemärkten und Investitionen in Infrastrukturen: Balance zwischen langfristigen Klimazielen und aktuellen Realitäten. p. 1 19 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Der Slalom des Ski-Recyclings

    Höfler, K. & Zidar, D., 22 Feb 2025, 2 p.

    Research output: Other contribution › Research

  13. Published

    Resolving the fundamentals of the J-integral concept by multi-method in situ nanoscale stress-strain mapping

    Meindlhumer, M., Alfreider, M., Sheshi, N., Hohenwarter, A., Todt, J., Rosenthal, M., Burghammer, M., Salvati, E., Keckes, J. & Kiener, D., 22 Feb 2025, In: Communications materials. 2025, 6, 15 p., 35.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Exploring Local Attitudes Towards Sustainable Tourism Development and Community Resilience in Skadar Lake and Durmitor National Parks, Montenegro: A Socio-Demographic Analysis

    Manojlović, B., Cvetković, V. M., Renner, R., Grozdanić, G. & Perosevic, N., 21 Feb 2025

    Research output: Other contribution › Research

  15. Published

    Influence of carbon and sulfur on austenite grain boundary mobility

    Kern, M., Bernhard, M. C., Scheiber, D., Suhane, A., Militzer, M. & Bernhard, C., 21 Feb 2025, In: Acta materialia. 288

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    The Fossil, the Green, and the In-Between: Life Cycle Assessment of Manufacturing Composites with Varying Bio-Based Content

    Kirschnick, U., Ravindran, B., Sieberer, M., Fauster, E. & Feuchter, M., 20 Feb 2025, In: Journal of composites science. 9.2025, 3, 18 p., 93.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    A New Approach Using Multi-Layer Films from Food Waste as a Shrink Film

    Plevová, K., Feuchter, M., Wild, N. & Resch-Fauster, K., 17 Feb 2025, In: Processes. 13.2025, 2, 16 p., 560.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Hydrodynamic performance testing of artificial textures using a novel pin-on-disc test method

    Pusterhofer, M., Maier, M., Scharf, R., Haumer, F. & Grün, F., 17 Feb 2025, In: Frontiers in Mechanical Engineering. 11.2025, 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Obituary Dr. Klaus Peter Jochum

    Meisel, T. C., Jacob, D., Weis, U., Mertz‐Kraus, R., Enzweiler, J., Borisova, A. & Williams, E. A., 17 Feb 2025, In: Geostandards and Geoanalytical Research. ??? Stand: 28. Februar 2025, ??? Stand: 28. Februar 2025, 2 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    On the effect of isotropic and anisotropic dissipative response functions with associated and nonassociated flow on the inelastic behavior of polymeric composites

    Gaddikere Nagaraja, S., Antretter, T. & Schuecker, C., 16 Feb 2025, In: Mechanics of advanced materials and structures. ??? Stand: 28. Februar 2025, ??? Stand: 28. Februar 2025, 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Combined X-ray microdiffraction and micromechanical testing for direct measurement of thin film elastic constants

    Janknecht, R., Hahn, R., Koutná, N., Todt, J., Meindlhumer, M., Davidok, A., Riedl, H., Keckes, J. & Mayrhofer, P. H., 15 Feb 2025, In: Materials and Design. 252.2025, April, 11 p., 113720.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Tailored Recycled Composites: Enhancing the Performance of Injection Moulded Post-Consumer Polypropylene Composites Using Box-Behnken Design

    Shahroodi, Z., Zidar, D., Momeni, V., Arbeiter, F., Duretek, I., Krempl, N., Berger-Weber, G. & Holzer, C., 15 Feb 2025, In: Polymer Testing. 2025, ??? Stand: 17. Februar 2025, 108743.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Characterization of High-Speed Steels—Experimental Data and Their Evaluation Supported by Machine Learning Algorithms

    Wießner, M. & Gamsjäger, E., 12 Feb 2025, In: Metals : open access journal . 15.2025, 2, 28 p., 194.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Impact of tensile specimen properties on hydrogen embrittlement testing using hollow specimens

    Oberreiter, P., Winter, G., Grun, F. & Drexler, A., 12 Feb 2025.

    Research output: Contribution to conference › Presentation › Research › peer-review

  25. Published

    Lessons from assessing sustainability in the mining and resources sector

    Tost, M., 12 Feb 2025, The Routledge Handbook of Global Sustainability Education and Thinking for the 21st Century.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer › peer-review

  26. Published

    Application of high-temperature confocal scanning laser microscopy to investigate non-metallic inclusions in steel: a review

    Preißer, N., Wang, Y., Cejka, J., Gruber, I., Mu, W. & Michelic, S. K., 11 Feb 2025, In: Journal of iron and steel research international. ??? Stand: 28. Februar 2025, ??? Stand: 28. Februar 2025, 9 p., 111030.

    Research output: Contribution to journal › Review article › peer-review

  27. Published

    Crack sensitivity of high-manganese cryogenic steels in initial solidification during continuous casting

    Li, Y., Winkler, J., Presoly, P., Bernhard, C., Qin, X.-F. & Cheng, C.-G., 10 Feb 2025, In: Journal of iron and steel research international. ??? Stand: 28. Februar, ??? Stand: 28. Februar, 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. E-pub ahead of print

    Formation of uranium-, vanadium- and chromium-bearing reduction spheroids in karst bauxite of the Unterlaussa mining district (Austria)

    Hampl, F., Dunkl, I., Schmidt, B. C., Bertrandsson Erlandsson, V. & Melcher, F., 10 Feb 2025, (E-pub ahead of print) In: Journal of geochemical exploration. 272.2025, May, 17 p., 107709.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Fatigue Assessment of Precorroded AlSi9Cu3 Specimens Incorporating Short Crack Propagation

    Oberreiter, P., Schönowitz, M., Maier, B. & Grün, F., 9 Feb 2025, In: Fatigue and Fracture of Engineering Materials and Structures. ??? Stand: 27. Februar 2025, ??? Stand: 27. Februar 2025, 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    EU supply chain due diligence (CSDDD): insights from a survey of companies in Austria

    Feichtinger, G. & Posch, W., 3 Feb 2025

    Research output: Non-textual form › Digital or Visual Products › Research

  31. Published

    Advancing the next generation of high-performance metal matrix composites through metal particle reinforcement

    Alem, S. A. A., Sabzvand, M. H., Govahi, P., Poormehrabi, P., Hasanzadeh Azar, M., Salehi Siouki, S., Rashidi, R., Angizi, S. & Bagherifard, S., Feb 2025, In: Advanced Composites and Hybrid Materials. 8, 1, 3.

    Research output: Contribution to journal › Review article › peer-review

  32. Published

    Towards high-strength electrolyte-supported solid oxide fuel cells

    Jana, A., Kraleva, I., Schlacher, J., Supancic, P., Egger, A., Bucher, E. & Bermejo, R., Feb 2025, In: Journal of the European Ceramic Society. 45, 2, 116929.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Understanding the lower fracture resistance of cold sintered ceramics

    Jabr, A., Ribul, E., Salamon, D. & Bermejo, R., Feb 2025, In: Journal of the European Ceramic Society. 45, 2, 116968.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    20 kHz X-ray diffraction on Cu thin films explores thermomechanical fatigue at high strain-rates

    Ziegelwanger, T., Reisinger, M., Vedad, B., Hlushko, K., Van Petegem, S., Todt, J., Meindlhumer, M. & Keckes, J., 31 Jan 2025, In: Materials and Design. 251.2025, March, 9 p., 113664.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Sensitivity analysis of the methanation process in underground hydrogen storage: A case study in Upper Austria

    Abdellatif, M., Azizmohammadi, S., Stiedl, G., Pichler, M. & Ott, H., 31 Jan 2025, In: International Journal of Hydrogen Energy. 105.2025, 4 March, p. 1164-1177 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Research Projects towards an Innovative, Digitalised, and Responsible Extractive Industry: Examples from the Chair of Mining Engineering and Mineral Economics

    Fernandez Munoz, P., Sánchez, F., Mavroudi, M., Ungerer, K., Hartlieb, P. & Tost, M., 29 Jan 2025, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research

  37. Published

    Teleoperation von mobilen Bergbaumaschinen

    Sifferlinger, N. A., 29 Jan 2025, In: Berg- und hüttenmännische Monatshefte : BHM. 170.2025, 2, p. 88-91 4 p.

    Research output: Contribution to journal › Article › Research

  38. Published

    Prototype of AI-powered assistance system for digitalisation of manual waste sorting

    Aberger, J., Shami, S., Häcker, B., Pestana, J., Khodier, K. & Sarc, R., 25 Jan 2025, In: Waste management. 194.2025, 15 February, p. 366-378 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Recycling the unrecyclable: Analyses of recycling opportunities in the winter sport industry

    Zidar, D., Bandl, C., Cwioro, T., Pardametz, V., Krempl, N. & Holzer, C., 24 Jan 2025, 4th International Conference on Polymer Process Innovation (PPI). Centre for Polymer and Material Technologies, p. 237-240 4 p. 20901

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Upcycling of regenerates and injection molding through a new technological approach

    Shahroodi, Z., Zidar, D., Krempl, N., Friesenbichler, W. & Holzer, C., 24 Jan 2025, PPI 2024 : International Conference on Polymer Process Innovation, Proceedings. p. 219-223 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Application of coupled CFD-DEM modelling in erosion study of cohesive materials: A case study of rotating finger test

    Rahimilarki, M., Burhanuddin, B., Vollmann, S., Jin, S. & Harmuth, H., 23 Jan 2025, In: Results in Engineering. 25.2025, March, 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Harvesting superior intrinsic plasticity in nitride ceramics with negative stacking fault energy

    Huang, Y., Chen, Z., Meindlhumer, M., Hahn, R., Holec, D., Leiner, T., Maier-Kiener, V., Zheng, Y., Zhang, Z., Hatzenbichler, L., Riedl, H., Mitterer, C. & Zhang, Z., 23 Jan 2025, In: Acta Materialia. 286.2025, 1 March, 15 p., 120774.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Thermally induced fracture modeling during a long-term water injection

    Liu, Y., Yoshioka, K., You, T., Li, H. & Zhang, F., 23 Jan 2025, In: International Journal of Rock Mechanics and Mining Sciences. 186.2025, February, 13 p., 106022.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Tracing non-metallic inclusions in steel with low levels of enriched magnesium stable isotopes: A novel approach

    Thiele, K., Wagner, S., Irrgeher, J., Prohaska, T. & Michelic, S. K., 22 Jan 2025, In: Materials characterization. 221.2025, March, 14 p., 114759.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Pelsonian and Illyrian (Anisian, Middle Triassic) ammonoid faunas from the Bulog Group of Kovčezi, Durmitor Mountain, Dinarides (northern Montenegro)

    Đaković, M., Mrdak, M. & Gawlick, H.-J., 21 Jan 2025, In: Austrian journal of earth sciences. 118.2025, 1, p. 1-40 40 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Evaluation of European Critical Raw Material Assessments under Energy Transition Considerations: Applications and Prospects

    Feichtinger, G. & Posch, W., 20 Jan 2025, In: Circular economy and sustainability. 75 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Effects of laser wavelength and pulse energy on the evaporation behavior of TiN coatings in atom probe tomography: A multi-instrument study

    Schiester, M., Waldl, H., Rice, K. P., Hans, M., Primetzhofer, D., Schalk, N. & Tkadletz, M., 17 Jan 2025, In: Ultramicroscopy. 270.2025, April, 10 p., 114105.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Sensor element and contact force sensor device

    Kammerhofer, T. (Inventor) & Thurner, T. (Inventor), 16 Jan 2025, IPC No. G01L5/16, G01L5/22, G01L19/00, B25J13/08, Patent No. 18763502

    Research output: Patent

  49. Published

    GIS-Based Assessment of Flash Flood Potential in North Macedonia: Insights from Advanced Geospatial Analytics

    Bojana , A., Milevski, I., Cvetković, V. & Nikolic, N., 15 Jan 2025, In: Preprints : the multidisciplinary preprint platform. p. 1-24 24 p.

    Research output: Contribution to journal › Article › Research

  50. Published

    Ab-initio grain boundary thermodynamics beyond the dilute limit

    Spitaler, T., Scheiber, D., Dösinger, C. A., Hodapp, M. & Romaner, L., 14 Jan 2025, In: Acta materialia. 286.2025, 1 March, 13 p., 120725.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Herausforderungen der EU-Lieferkettensorgfaltspflichten

    Feichtinger, G. & Posch, W., 14 Jan 2025

    Research output: Non-textual form › Digital or Visual Products › Research

  52. Published

    Integration von Umwelt‑, Sozial- und Polit-Aspekten in die Abläufe der Abbauplanung.

    Haindl, A., 14 Jan 2025, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research

  53. Published

    Microstructural features and hydrogen diffusion in bcc FeCr alloys: A comparison between the Kelvin probe- and nanohardness based-methods

    Rao, J., Sun, B., Ganapathi, A., Dong, X., Hohenwarter, A., Wu, C. H., Rohwerder, M., Dehm, G. & Duarte, M. J., 14 Jan 2025, In: International Journal of Hydrogen Energy. 102.2025, 10 February, p. 1103-1115 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    The catalytic effect of Ni in methane pyrolysis using molten SnNi alloys for hydrogen production

    Scheiblehner, D., Neuschitzer, D., Wibner, S., Sprung, A., Tunes, M. A., Leuchtenmüller, M., Scherr, C., Antrekowitsch, H. & Luidold, S., 14 Jan 2025, In: International Journal of Hydrogen Energy . 102.2025, 10 February, p. 1045-1054 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Tracing the Origin of Oxide Inclusions in Vacuum Arc Remelted Steel Ingots Using Trace Element Profiles and Strontium Isotope Ratios

    Walkner, C., Mukhametzianova, G., Wagner, S., Korp, J., Graf, A., Irrgeher, J., Meisel, T. C. & Prohaska, T., 14 Jan 2025, In: Metals. 15.2025, 1, p. 67 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Electronic structure, phase formation, and defect distribution in the Ba(Ce,Fe,Acc)O3-δ system

    Merkle, R., Hoedl, M. F., Chesnokov, A., Gryaznov, D., Bucher, E., Kotomin, E. A., Sitte, W. & Maier, J., 12 Jan 2025, In: Acta Materialia. 287.2025, 1 April, 10 p., 120739.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Demand Aggregation and Mid-Term Energy Planning Problem on the Business Layer

    Poulios, N., Livada, M. & Melas, E., 9 Jan 2025, Optimization, Discrete Mathematics and Applications to Data Sciences . 1 ed. Springer, p. 117-134

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  58. Published

    Estimation of residual stresses in single crystal sapphire wafers through eigenmode analysis

    Gruber, M., Kreith, J., Lohrasbi, S., Bermejo, R. & Supancic, P. H., 9 Jan 2025, In: Scripta Materialia. 259.2025, 1 April, 5 p., 116538.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Synergistic precipitation reactions in a novel high-temperature Ti-alloy

    Farabi, E., He, X., Obersteiner, D., Musi, M., Neves, J., Klein, T. & Primig, S., 9 Jan 2025, In: Scripta materialia. 259.2025, 1 April, 7 p., 116543.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Phase stability and enhanced mechanical properties of nanocrystalline PVD CrCu coatings

    Burtscher, M., Kainz, C., Dorner, P., Fellner, S., Terziyska, V., Alfreider, M. & Kiener, D., 8 Jan 2025, In: Journal of Materials Research and Technology. 35.2025, March-April, p. 369-378 10 p., 35.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Accurate prediction of structural and mechanical properties on amorphous materials enabled through machine-learning potentials: A case study of silicon nitride

    Nayak, G. K., Srinivasan, P., Todt, J., Daniel, R., Nicolini, P. & Holec, D., 6 Jan 2025, In: Computational materials science. 249.2025, 5 February, 11 p., 113629.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Horgen-Käpfnach, the largest Swiss coal deposit: Geology, petrology and geochemistry

    Sachsenhofer, R. F., Aghayeva, V., Ajuaba, S., Kojić, I., Misch, D. & Stojanović, K., 6 Jan 2025, In: International journal of coal geology. 299.2025, 12 February, 20 p., 104684.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Superhydrophilic Titania Coatings on Glass Substrates via the Hydrosol Approach

    Theodorakopoulos, G. V., Arfanis, M., Mouti, N.-M., Kaidatzis, A., Mitterer, C., Giannakopoulos, K. & Falaras, P., 6 Jan 2025, In: Surfaces. 8.2025, 1, 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Variational Phase-Field Fracture Approach in Reactive Porous Media

    Mollaali, M., Yoshioka, K., Lu, R., Montoya, V., Vilarrasa, V. & Kolditz, O., 3 Jan 2025, In: International journal for numerical methods in engineering. 126.2025, 1, e7621.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Very high cycle fatigue properties of short glass fiber reinforced polyetheretherketone (PEEK)

    Fitzka, M., Stadler, G., Schönbauer, B. M., Pinter, G. & Mayer, H., Jan 2025, In: International Journal of Fatigue. 190, 108652.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Contact damage response of alumina-based layered architectures under different loading configurations

    Schlacher, J. C., Stücklberger, F., Jabr, A. & Bermejo, R., 2025, In: Journal of the European Ceramic Society. 45.2025, 3, 8 p., 117037.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Dealing with High-Risk Police Activities and Enhancing Safety and Resilience: Qualitative Insights into Austrian Police Operations from a Risk Perception and Group Dynamic Perspective

    Renner, R., Cvetković, V. & Lieftenegger, N., 2025, In: Preprints : the multidisciplinary preprint platform. 54 p.

    Research output: Contribution to journal › Article › Research

  68. Published

    Detecting downhole drilling events EP 4 189 206 B1

    Elmgerbi, A. (Inventor) & Thonhauser, G. (Inventor), 2025, Patent No. EP 4 189 206 B1

    Research output: Patent

  69. Published

    Dual-functional carbon material with ultra-high surface area for efficient removal of airborne and water pollutants: Mustard gas vapours and aquatic radionuclide (Am 241 and U 232) remediation

    Ioannidis, I., Ioannou, K., Zeiler, S., Mitterer, C., Kostoglou, N., Giannakoudakis, D. A., Pashalidis, I. & Rebholz, C., 2025.

    Research output: Contribution to conference › Poster › Research › peer-review

  70. Published

    Enhanced dehydrogenation and regeneration behavior of LiBH4–LiAlH4–MgCl2 in nanoporous carbons

    Hsu, C.-Y., Kostoglou, N., Mitterer, C., Rebholz, C., Chang, C.-K., Chuang, Y.-C. & Wang, C.-Y., 2025, In: International Journal of Hydrogen Energy . 2025, 106, p. 712-722

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Extrinsic and intrinsic strength of amorphous olivine films

    Jarnot, J., Dohmen, R., Trost, C. O. W., Mitterer, C., Cordier, P. & Glushko, O., 2025, In: European journal of mineralogy. 2025, 37, p. 91-99

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Finite Element Investigation of the Dynamic Behavior of High-Speed Turnouts with Swing-Nose Crossing

    Sistaninia, M., Daves, W., Bucher, C., Antretter, T. & Gänser, H. P., 2025, Advances in Dynamics of Vehicles on Roads and Tracks III - Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, Rail Vehicles. Huang, W. & Ahmadian, M. (eds.). p. 1047-1058 12 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Impact of annealing and hydrogenation on the superconducting transition temperature of (TiNbMoTaW)Nx high entropy alloy nitride films

    Pristáš, G., Gruber, G., Bačkai, J., Košuth, F., Kölbl, L., Bures, R., Fáberová, M., Gabáni, S., Onufriienko, O., Vorobiov, S., Mitterer, C. & Flachbart, K., 2025, In: Solid State Sciences : SSS. 2025, 161, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Improving contact damage resistance of spinel translucent ceramics through a multi-layer design

    Najafzadehkhoee, A., Jabr, A., Talimian, A., Papsik, R., Drdlik, D., Maca, K., Galusek, D. & Bermejo, R., 2025, In: Journal of the European Ceramic Society. 45.2025, 4, 9 p., 117071.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    In Vivo Assessment on Freeze-Cast Calcium Phosphate-Based Scaffolds with a Selective Cell/Tissue Ingrowth

    Pejchalová, L., Pejchal, J., Roleček, J., Vojníková, M., Chlup, Z., Mařák, V., González-Sánchez, M., Čížková, J. & Salamon, D., 2025, In: ACS Applied Materials and Interfaces. 16.2024, 43, p. 58326-58336 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Kinetic and Process Modeling of Guerbet Coupling Chemistry over Cu-Mg-Al Mixed Oxides

    Chavarrio Canas, J., Markowitsch, C., Votava, E., Lehner, M. & Huber, G. W., 2025, In: EES Catalysis. 2025

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    New Prediction Method of Subsidence Based on the Numerical Displacement Analysis: A Study Case of Deep-Buried Thick Alluvial Layer and Thin Bedrock

    Wang, J., Wu, S., Wang, Z., Babaryka, A., Tost, M. & Li, M., 2025, In: Rock mechanics and rock engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    On the Road Towards Understanding Squats - Metallographic Investigations of Rails

    Gschwandl, T., Spalek, A., Antretter, T. & Daves, W., 2025, Advances in Dynamics of Vehicles on Roads and Tracks III - Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, Rail Vehicles. Huang, W. & Ahmadian, M. (eds.). p. 314-323 10 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    Servitization-Strategien für die Prozessindustrie: Wettbewerbsvorteile durch hybride Geschäftsmodelle, Innovation und Service

    Unterreiter, G. & Posch, W., 2025

    Research output: Non-textual form › Digital or Visual Products › Research

  80. Published

    Thermally Treated Residues and By-Products as Components of Waste-Based Alkali-Activated Materials

    Steindl, F. R., Radinger, S., Hassan, A., Rudic, O., Weisser, K., Krammer, A., Doschek-Held, K., Ratz, B., Zögl, I., Raič, S., Mittermayr, F. & Vallazza-Grengg, C., 2025, RILEM Bookseries. p. 53-61 9 p. (RILEM Bookseries; vol. 55).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  81. 2024
  82. Published

    Development of a novel aerosol-lubricated ring-on-liner test methodology

    Gussmagg, J., Pusterhofer, M., Breitegger, M. & Grün, F., 31 Dec 2024, In: Tribologia : Finnish Journal of Tribology. 41.2024, 3-4, p. 49-51 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Qualitative insights into cultural heritage protection in Serbia: Addressing legal and institutional gaps for disaster risk resilience

    Cvetković, V., Gole, S., Renner, R., Jakovljevic, V. & Lukić, T., 31 Dec 2024, In: Open Geosciences. 16.2025, 1, 41 p., 20220755.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Revealing the hidden polysulfides in solid-state Na-S batteries: How pressure and electrical transport control kinetic pathways

    Nguyen, H. Q., Kanedal, M. D., Todt, J., Jin, F., Do, Q., Zalka, D., Maximenko, A., Stoian, D., Schell, N., Beek, W. V., Boles, S., Keckes, J. & Rettenwander, D., 31 Dec 2024

    Research output: Other contribution › Research

  85. Published

    Reliable Atom Probe Tomography of Cu Nanoparticles Through Tailored Encapsulation by an Electrodeposited Film

    Cicek, A., Knabl, F., Schiester, M., Waldl, H., Rafailovic, L., Tkadletz, M. & Mitterer, C., 30 Dec 2024, In: Nanomaterials. 15.2025, 1, 13 p., 43.

    Research output: Contribution to journal › Article › Research › peer-review

  86. E-pub ahead of print

    Crystallization of Fe74Mo4P10C7.5B2.5Si2 metallic glass: Insights from in-situ synchrotron diffraction and Flash DSC

    Römer, F., Ramasamy, P., Steffny, I., Stoica, M., Lienert, U., Quick, C. R., Hegedüs, Z., Eckert, J. & Spieckermann, F., 27 Dec 2024, (E-pub ahead of print) In: Materials today advances. 25.2025, March, 7 p., 100550.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Impact of Relative Permeability Hysteresis on CO2 Storage in Saline Aquifers

    Khoramian, R., Salaudeen, I., Pourafshary, P., Riazi, M. & Kharrat, R., 27 Dec 2024, In: Greenhouse Gases: Science and Technology. 15.2025, 1, p. 3-12 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Influence of material–material interactions and wear on coarse waste shredders

    Lasch, T., Khodier, K. (Co-editor), Feyerer, C. (Co-editor), Lehner, M. (Co-editor) & Sarc, R. (Co-editor), 27 Dec 2024, In: Waste Management and Research. ??? Stand: 10. Februar 2025, ??? Stand: 10. Februar 2025, 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Interplay of flow stratification, segregation channels, and crystal dynamics in a solidifying aqueous ammonium chloride solution

    Ludwig, A., Siyahatshayesteh, G., Stefan-Kharicha, M., Wu, M. & Kharicha, A., 27 Dec 2024, In: International journal of heat and mass transfer. 240.2025, 1 May, 8 p., 126638.

    Research output: Contribution to journal › Article › Research › peer-review

  90. E-pub ahead of print

    Stabilization of mechanical strength in a nanocrystalline CoCrNi concentrated alloy by nitrogen alloying

    Moravcik, I., Alfreider, M., Wurster, S., Schretter, L., Zadera, A., Pernica, V., Čamek, L., Eckert, J. & Hohenwarter, A., 27 Dec 2024, (E-pub ahead of print) In: Materials Science and Engineering: A. 924.2025, February, 14 p., 147757.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Influence of Different Measuring Backgrounds on the Classification of Multilayer Polyolefin Films Using a Near-Infrared Handheld Spectrometer

    Stipanovic, H., Arth, P., Koinig, G., Kuhn, N. E., Lederer, J., Blasenbauer, D., Lipp, A.-M. & Tischberger-Aldrian, A., 26 Dec 2024, In: Applied spectroscopy. ??? Stand: 4. Februar 2025, ??? Stand: 4. Februar 2025, 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    A Systematic Literary Review on Community Resilience Indicators: Adaptation and Application of the BRIC Method for Measuring Disasters Resilience

    Milenković, D., Cvetković, V. & Renner, R., 25 Dec 2024, In: International journal of disaster risk management. 6.2024, 2, p. 79-103 25 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Industrial Disasters and Hazards: From Causes to Consequences: A Holistic Approach to Resilience

    Cvetković, V., Renner, R. & Jakovljević, V., 25 Dec 2024, In: International journal of disaster risk management. 6.2024, 2, p. 149-168 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Optimising Disaster Resilience Through Advanced Risk Management and Financial Analysis of Critical Infrastructure in the Serbian Defence Industry

    Vidović, N., Beriša, H. & Cvetković, V., 25 Dec 2024, In: International journal of disaster risk management. 6.2024, 2, p. 183-199 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  95. E-pub ahead of print

    Unusual hardness and string-like structures relaxation of metallic glass investigated by in-situ synchrotron radiation

    Zhang, N. Z., Spieckermann, F., Yuan, X. D., Şopu, D., Jin, X., Sun, K., Mendez, A., Yu, P., Wang, G. & Eckert, J., 25 Dec 2024, (E-pub ahead of print) In: Journal of alloys and compounds. 1010.2025, 5 January, 7 p., 178287.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    3D-Printed Acrylated Soybean Oil Scaffolds with Vitrimeric Properties Reinforced by Tellurium-Doped Bioactive Glass

    Bergoglio, M., Kriehuber, M., Sölle, B., Rossegger, E., Schlögl, S., Najmi, Z., Cochis, A., Ferla, F., Miola, M., Vernè, E. & Sangermano, M., 23 Dec 2024, In: Polymers. 16.2024, 24, 19 p., 3614.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Influence of increasing chromium content on additively manufactured tool steels: Microstructural and mechanical evolution before and after heat treatment

    Ofner, N., Bodner, S., Kunnas, P., Asci, A., Kutlesa, K., Stark, A., Höbenreich, P., Aumayr, C., Wu, L., Turk, C., Keckes, J. & Meindlhumer, M., 21 Dec 2024, In: Journal of Materials Research and Technology. 34.2025, January-February, p. 2715-2727 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    A systematic model- and experimental approach to hydro-mechanical and thermo-mechanical fracture processes in crystalline rocks

    Kolditz, O., McDermott, C., Yoon, J. S., Mollaali, M., Wang, W., Hu, M., Sasaki, T., Rutqvist, J., Birkholzer, J., Park, J.-W., Park, C.-H., Liu, H., Pan, P., Nagel, T., Nguyen, S., Kwon, S., Lee, C., Kim, K.-I., Alexander, B. & Hadgu, T. & 5 others, Wang, Y., Zhuang, L., Yoshioka, K., Cunha, G. B. & Fraser-Harris, A., 20 Dec 2024, In: Geomechanics for energy and the environment. 41.2025, March, 25 p., 100616.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Assessing the hydrogen embrittlement susceptibility of an existing L360NB natural gas pipeline steel for 100 % hydrogen transport

    Ahmed Hamed Mahmoud Eid Gouda, A. H. M. E. G., Posch-Peperkorn, C., Maierhofer, J., Beschliesser, M., Fink, S. & Mori, G. K., 19 Dec 2024, In: Corrosion science. 244.2025, March, 11 p., 112648.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Integrated Rock Mass Characterization of the Lower Continental Crust Along the ICDP-DIVE 5071_1_B Borehole in the Ivrea-Verbano Zone

    Li, J., Caspari, E., Greenwood, A., Pierdominici, S., Lemke, K., Venier, M., Kück, J., Baron, L., Pistone, M., Petri, B., Ziberna, L. & Hetényi, G., 18 Dec 2024, In: Geochemistry, geophysics, geosystems. 25.2024, 12, 26 p., e2024GC011707.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Microstructural insights into the coarse‑grained heat‑affected zone of a high‑strength all‑weld metal: Development of a continuous cooling transformation diagram

    Schrittwieser, D., Marin Morales, D., Pahr, H., Lumper-Wimler, L., Glushko, O. & Schnitzer, R., 18 Dec 2024, In: Welding in the world. ??? Stand: 4. Februar 2025, ??? Stand: 4. Februar 2025, 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Strain rate-dependent failure modes of material extrusion-based additively manufactured PETG: A study on crack deflection and penetration

    Waly, C., Schulnig, S. & Arbeiter, F., 18 Dec 2024, In: Theoretical and Applied Fracture Mechanics. 136.2025, April, 15 p., 104834.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...335 Next
View graph of relations