Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

301 - 350 out of 4,192Page size: 50

Research output

  1. 2023
  2. Published

    A method to reduce computation time in finite element simulations of deep rolling

    Bialowas, J., Pletz, M., Gapp, S. & Maierhofer, J., 2023, In: Procedia Structural Integrity. 46, p. 49-55 7 p.

    Research output: Contribution to journal › Conference article › peer-review

  3. Published

    Annealing effects on Al/polyimide adhesion in flexible optical solar reflectors

    Cordill, M. J., Kreiml, P., Lassnig, A., Gebhart, D., Žák, S., Mitterer, C., Grießer, T. & Milassin, G., 2023, In: IOP Conference Series: Materials Science and Engineering. 2023, 1287, 9 p., 012006.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Batch variations of post-consumer recyclates and their influence on material properties

    Schatz, L. M., 2023

    Research output: Thesis › Master's Thesis

  5. Published

    Bestimmung des Schwindungsverhaltens von spritzgegossenen, glasfaserverstärkten Kunststoffen

    Zirnig, T., 2023

    Research output: Thesis › Master's Thesis

  6. Published

    Bio-based soft composites with knitted reinforcements

    Schwaiger, M., Bender, M., Schirmer, H., Taesler, J., Kosse, S., Feuchter, M. & Resch-Fauster, K., 2023.

    Research output: Contribution to conference › Poster › Research

  7. Published

    Bio-based soft composites with knitted reinforcements

    Schwaiger, M., Bender, M., Schirmer, H., Taesler, J., Kosse, S., Feuchter, M. & Resch-Fauster, K., 2023, 31st Leoben Conference on Polymer Engineering & Science. Leoben

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    BIOBASED STRETCH FILMS – THE FUTURE OF PACKAGING?

    Feuchter, M., 2023, Polymer Meeting 15 - Book of Abstacts. p. 93 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Biomimetic concepts for the optimization of mechanical properties in layered polymeric materials

    Wiener, J., 2023

    Research output: Thesis › Doctoral Thesis

  10. Published

    Characterization of material interactions of polymers in PV modules

    Barretta, C., 2023

    Research output: Thesis › Doctoral Thesis

  11. Published

    Circularity and sustainability of biobased polymer/natural fiber reinforced composite

    Ravindran, B. & Schledjewski, R., 2023, Global Challenges for a Sustainable Society .

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  12. Published

    Comparison of different measuring methods for thermo-mechanical characterization of polymer powders

    Tröscher, T., 2023

    Research output: Thesis › Master's Thesis

  13. Published

    Correlating crack density, stiffness degradation and dissipated energy during fatigue loading of ±45° GFRP laminates

    Gfrerrer, M., Wiener, J., Drvoderic, M., Brunner, A. J. & Pinter, G., 2023.

    Research output: Contribution to conference › Paper › peer-review

  14. Published

    Delamination resistance testing of fiber reinforced polymer laminates combined with acoustic emission analysis

    Koss, V., 2023

    Research output: Thesis › Master's Thesis

  15. Published

    Development and characterisation of vitrimer-like elastomers and elastomeric composites from HXNBR rubber

    Grabmayer, T., Kaiser, S., Pilz, G., Kern, W. & Schlögl, S., 2023.

    Research output: Contribution to conference › Poster › Research

  16. Published

    Development and characterization of functional coating to improve the friction behavior of thermoplastic surfaces

    Gleirscher, M., Kopp, M., Hausberger, A., Lackner, J. & Schlögl, S., 2023.

    Research output: Contribution to conference › Poster › Research

  17. Published

    Development of electrically conductive resins for DLP printing applications

    Feigl, V., 2023

    Research output: Thesis › Master's Thesis

  18. Published

    Development of reprocessable adhesive systems for carbon and glass fiber reinforced plastics applications

    Bautista-Anguís, D., Reiner, L., Wolfberger, A., Maar, S., Röper, F., Wolfahrt, M., Schlögl, S. & Hader-Kregl, L., 2023.

    Research output: Contribution to conference › Poster › Research

  19. Published

    Development of reprocessable adhesive systems for carbon and glass fiber reinforced polymer applications

    Bautista-Anguís, D., Reiner, L., Wolfberger, A. & Schlögl, S., 2023.

    Research output: Contribution to conference › Poster › Research

  20. Published

    Development of Stimuli-responsive photopolymers for the 3D-printing of functional active devices

    Shaukat, U., 2023

    Research output: Thesis › Doctoral Thesis

  21. Published

    Digital light processing 3D printing of dynamic magneto-responsive thiol-acrylate composites

    Cazin, I., Rossegger, E., Roppolo, I., Sangermano, M., Granitzer, P., Rumpf, K. & Schlögl, S., 2023.

    Research output: Contribution to conference › Poster › Research

  22. Published

    Effect of weld lines on in-vitro drug release from additively manufactured pharmaceutical devices of ethylene vinyl acetate (EVA) produced via material extrusion (MEX)

    Gomez Contreras, A., 2023

    Research output: Thesis › Master's Thesis

  23. Published

    Einfluss der Materialvorbehandlung und Prozessparameter auf die Eigenfluoreszenz von spritzgegossenen Cyclo Olefin Polymer Bauteilen

    Habicher, M., 2023

    Research output: Thesis › Master's Thesis

  24. Published

    Einfluss von Fließhilfsmitteln auf Polyamid 12 basierte Pulver für das Pulverbettschmelzen

    Staniszewski, M., 2023

    Research output: Thesis › Master's Thesis

  25. Published

    Entwicklung gefüllter Photopolymere für die Additive Fertigung von Zinngussformen

    Hellmayr, A., 2023

    Research output: Thesis › Master's Thesis

  26. Published

    Environmental assessment comparison of natural fiber reinforced polymer composites processing

    Kirschnick, U., 2023.

    Research output: Contribution to conference › Presentation › Research › peer-review

  27. Published

    Environmental assessment of natural fiber reinforced polymer composites processing

    Kirschnick, U. & Schledjewski, R., 2023, 31st Leoben Conference on Polymer Engineering & Science.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Environmental performance comparison of a one-step and two-step compounding and injection molding process using recycled PP and GF

    Kirschnick, U., 2023.

    Research output: Contribution to conference › Presentation › Research › peer-review

  29. Published

    Environmental performance comparison of a one-step and two-step compounding and injection molding process using recycled PP and glass fibers

    Kirschnick, U., Shahroodi, Z., Krempl, N. & Schledjewski, R., 2023, Polymer Meeting 15: Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    ESTIMATION OF THE LIFE TIME OF 3D-PRINTED CONTINUOUS FIBER-REINFORCED COMPONENTS

    Petersmann, S., Kaylani, D., Stadler, G., Leßlhumer, J., Lammer, H., Arbeiter, F. & Pinter, G., 2023.

    Research output: Contribution to conference › Paper › peer-review

  31. Published

    Evaluation of repairing techniques for damaged natural fiber reinforced composites

    Cardenas Velasco, J., 2023

    Research output: Thesis › Master's Thesis

  32. Published

    Experimental and Numerical Investigation of Mechanical Metamaterials Produced by Selective Laser Sintering

    Huber, P., 2023

    Research output: Thesis › Master's Thesis

  33. Published

    Food safety, plastics and sustainability

    Fink, J., 2023

    Research output: Book/Report › Book › Research

  34. Published

    From Single- to Multi-point – The Variable Properties of Polymers

    Pilz, G., 2023.

    Research output: Contribution to conference › Poster › Education › peer-review

  35. Published

    Frontal Polymerization of Dynamic Networks

    Schmidleitner, C., Hirner, S., Reisinger, D., Schlögl, S. & Rossegger, E., 2023.

    Research output: Contribution to conference › Poster › Research

  36. Published

    Immiscible Polymer Blends: Relationships between Processing Conditions, Morphology, and Mechanical Properties

    Corbillon Castro, P., 2023

    Research output: Thesis › Master's Thesis

  37. Published

    Implementation and investigation of a vitrimer-like behavior in HXNBR elastomer and elastomer composites

    Grabmayer, T., Kaiser, S., Jandl, J., Novak, P., Wurzer, S., Kern, W. & Schlögl, S., 2023.

    Research output: Contribution to conference › Poster › Research

  38. Published

    Improved nanoindentation methods for polymer based multilayer film cross-sections

    Christoefl, P., Jakes, J. E., Geier, J., Pinter, G., Oreski, G., Stone, D. & Teichert, C., 2023, 2023 24th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2023. Institute of Electrical and Electronics Engineers, (2023 24th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2023).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Influence of anion and cation structure on ionic liquid based epoxy systems as reversible adhesives

    Trausner, C., 2023

    Research output: Thesis › Master's Thesis

  40. Published

    INFLUENCE OF CREEP LOAD ON AGING AND FRACTURE MECHANIC BEHAVIOUR OF SHORT FIBRE REINFORCED PEEK

    Stadler, G. & Pinter, G., 2023.

    Research output: Contribution to conference › Paper › peer-review

  41. Published

    Influence of Epoxy Chain Extender and Multi-Stage Compounding Process on the Properties of Poly-(R)-3-hydroxybutyrate

    Hinterberger, K., 2023

    Research output: Thesis › Master's Thesis

  42. Published

    Influence of the Textile Architecture on its Transversal Compaction Behaviour

    Hollitsch, M., 2023

    Research output: Thesis › Master's Thesis

  43. Published

    Inline monitoring and control for Automated Tape Laying

    Yadav, N., 2023

    Research output: Thesis › Doctoral Thesis

  44. Published

    Innovative design of covalent adaptable polymer networks: Chemistry of new catalysts for bond exchange reactions and strategies towards controlled and efficient self-healing

    Alabiso, W., 2023

    Research output: Thesis › Doctoral Thesis

  45. Published

    Investigation of background noise affecting AE data acquisition during tensile loading of FRPs

    Gfrerrer, M., Wiener, J., Brunner, A. J. & Pinter, G. G., 2023, e-Journal of Nondestructive Testing.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Investigation of the influence of speed increase in pultrusion by means of design of experiment on the barrier properties of glass fiber reinforced polyester profiles.

    Ekam, M., 2023

    Research output: Thesis › Master's Thesis

  47. Published

    LCA of a recycled GFRP composite: Comparing attributional and consequential modelling approaches

    Kirschnick, U., 2023.

    Research output: Contribution to conference › Presentation › Research › peer-review

  48. Published

    Methode zur Auswahl alternativer Materialpaarungen für Kunststoffrollen unter Beachtung anwendungsspezifischer Prüfmethoden

    Söllner, M., 2023

    Research output: Thesis › Master's Thesis

  49. Published

    Modeling fatigue damage in composite laminates

    Drvoderic, M., 2023

    Research output: Thesis › Doctoral Thesis

  50. Published

    Monitoring the sorting performance in lightweight packaging waste sorting plants using data of sensor-based sorters

    Schlögl, S., Schmölzer, G., Weber, A., Anditsch, A. & Aldrian-Tischberger, A., 2023, 6th International Conference on Optical Characterization of Materials, OCM 2023. Beyerer, J., Beyerer, J., Heizmann, M. & Längle, T. (eds.). p. 1-10 10 p. (Optical Characterization of Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Nirali and the Wise Bottles

    Main, P., 2023, Plastic Planet: A guide to recycling and caring for our environment. p. 12-17 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer › peer-review

Previous 1...3 4 5 6 7 8 9 10 ...84 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301