Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

3101 - 3200 out of 4,192Page size: 100

Research output

  1. 2010
  2. Published

    Investigation of the binding-sulfide layer formation on brass-coated steel wires using squalene as low-molecular model compound for NR

    Ziegler, E., Gruber, D., Kern, W., Feldgitscher, C., Holzner, A. & Trimmel, G., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  3. Published

    Investigation of the slow crack growth behavior of static and cyclic loaded specimens of polyethylene by 2D and 3D optical fracture surface analysis

    Frank, A., Bruckmoser, K., Redhead, A., Gruber, D. & Pinter, G., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Investigation of the slow crack growth behavior of static and cyclic loaded specimens of polyethylene by 2D and 3D optical fracture surface analysis

    Andreas, F., Bruckmoser, K., Redhead, A., Gruber, D. P. & Pinter, G., 2010, Proceedings of "Austrian-Slovenian Polymer Meeting 2010". p. 145-145

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Investigation on failure mechanisms of electrical insulation in high voltage applications

    Lenko, D., Schloegl, S., Kern, W., Bichler, S., Lemesch, G. & Ramsauer, F., 2010, In: VLK-News. 18, p. 22-23

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Investigation on failure mechanisms of electrical insulation in high voltage applications

    Lenko, D., Schloegl, S., Kern, W., Bichler, S., Lemesch, G. & Ramsauer, F., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    Investigation on failure mechanisms of electrical insulation in high voltage applications

    Lenko, D., Schlögl, S., Kern, W., Bichler, S., Lemesch, G. & Ramsauer, F., 2010.

    Research output: Contribution to conference › Poster › Research

  8. Published

    Investigation on thermomechanical characteristics of electrical epoxy-mica based composite insulation in high voltage applications

    Lenko, D., Schloegl, S., Bichler, S., Lemesch, G., Ramsauer, F. & Kern, W., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  9. Published

    Investigations of Adhesion on Two-shot Moulded Parts

    Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  10. Published

    Investigations of Adhesion on Two-shot Moulded Parts

    Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 111-111

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    INVESTIGATIONS OF ADHESION ON TWO-SHOT MOULDED PARTS

    Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    Kerbschlagbiegeversuche an 11 PP Compounds

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  13. Published

    Kerbschlagbiegeversuche an 15 PP Compounds

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  14. Published

    Kerbschlagprüfungen an PE Typen

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  15. Published

    Kerbschlagprüfungen an PP Compounds

    Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Kompressions- und Scherversuche an PU-Schaum

    Hinterdorfer, S. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    Konischer Gleichläufer macht Druck

    Klammer, G., Holzer, C., Schuschnigg, S. & Selvasankar, R. K., 2010, In: Kunststoffe. p. 80-83

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Kunststoffrohre für Erdölanwendungen - Charakterisierung von Permeations- und Werkstoffeigenschaften

    Mach, M., 2010

    Research output: Thesis › Master's Thesis

  19. Published

    Kunststoffverarbeitung - über Spritzguß und Extrusion hinaus

    Holzer, C., 2010, In: KC-aktuell (Informationen aus dem Kunstoff-Cluster). p. 1-3

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Making of Low Allergenic Surgical Gloves from Natural Rubber Latex via UV Techniques

    Schloegl, S., Schaller, R., Holzner, A. & Kern, W., 2010, Book of Abstracts. p. 82-82

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Manufacture of Non-Allergenic Surgical Gloves via UV Techniques

    Schlögl, S., Temel, A., Kern, W., Schaller, R. & Holzner, A., 2010, In: Kautschuk, Gummi, Kunststoffe. 63, 5, p. 187-191

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Mathematical Modeling and Optimization of Run Parameters of Crystallization Analysis Fractionation (CRYSTAF)

    Fischlschweiger, M., Aust, N., Oberaigner, E. & Kock, C., 2010, In: Macromolecular chemistry and physics. 211, p. 383-392

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Mathematical modelling of the flow behaviour in the pressure build-up zone of a conical co-rotating twin screw extruder

    Selvasankar, R. K., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Measurement of pressure dependent viscosity and its influence on injection molding simulation

    Friesenbichler, W., Rajganesh Jegadeesan, X., Lucyshyn, T., Filz, P. & Webelhaus, K., 2010, 4th International PMI Conference - Conference Proceedings. p. 215-219

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Mechanische Charakterisierung eines glasfaserverstärkten UP-Werkstoffes

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    Mechanische Leistungssteigerung von Butadienkautschuken durch Modifizierung mit Carbon-Nanotubes

    Mach, E. R., 2010

    Research output: Thesis › Master's Thesis

  27. Published

    Mechanische und morphologische Untersuchungen an Polyolefin/Algen-Compounds

    Feuchter, M. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    Method development for the reliability testing of printed circuit boards under dynamic loads

    Major, Z. & Fuchs, P. F., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    Modulation of the Chemical and Physical Properties of Thin Polymer Films via UV-light

    Grießer, T., Edler, M., Köpplmayr, T., Muhr, N., Kern, W., Trimmel, G., Shen, Q., Teichert, C., Flesch, H.-G., Marchl, M., Zojer, E., Resel, R., Sosa, G. H., Simbrunner, C., Sitter, H., Track, A., Koller, G. & Ramsey, M. G., 2010, Book of Abstracts. p. 48-48

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Molar mass distribution of several injection molded parts of PS and PP

    Aust, N., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    Morphology of polyethylene ski base materials

    Fischer, J., Wallner, G. & Pieber, A., 2010, In: Journal of sports sciences. 28, 5, p. 555-562

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Morphology of wax modified coil coatings without and with pigmentation

    Fischer, J., Wallner, G., Strauß, B. & Jandel, L., 2010, In: Progress in organic coatings. p. 38-43

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Nanotechnology as a New Approach for Material Recycling of PET Bottles

    Kracalik, M., Laske, S. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  34. Published

    Nanotechnology as a New Approach for Material Recycling of PET Bottles

    Kracalik, M., Laske, S. & Holzer, C., 2010, Tagungsband zur 10. DepoTech-Konferenz. p. 617-620

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    New Insights into Characterization of Flow Properties of PP Based Wood Platic Composites

    Duretek, I., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  36. Published

    NMR-Untersuchungen an Walzenbelägen

    Aust, N., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  37. Published

    Novel methodologies for the measurement of preceptual surface properties

    Gruber, D. P. & Friesenbichler, W., 2010, Book of Abstracts. p. 63-63

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Numerische Simulation des Risswachstums mit dem Kohäsivzonenmodell: Untersuchungen für Stahl, Polyethylen und Polyethylenverbunde

    Janko, M., 2010

    Research output: Thesis › Master's Thesis

  39. Published

    Overview of influences on demolding forces in injection molding

    Berger, G. & Friesenbichler, W., 2010, 4th International PMI Conference - Conference Proceedings. p. 197-206

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Patterned immobilisation of silicon dioxide nanoparticles on photo sensitive polymer films

    Muhr, N., Grießer, T. & Kern, W., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    Patterned modulation of the conductivity of polyaniline derivatives by means of photolithography

    Radl, S., 2010, 69 p.

    Research output: Thesis › Master's Thesis

  42. Published

    Patterning and functionalization of organic thin layers on silicon surfaces by means of UV light

    Edler, M., Grießer, T., Kern, W., Trimmel, G., Shen, Q., Teichert, C., Flesch, H.-G., Außerlechner, S. J., Marchl, M., Zojer, E., Resel, R., Track, A. M., Koller, G. & Ramsey, M. G., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Photochemical control of the carrier mobility in pentacene--based organic thin-film transistors

    Marchl, M., Golubkov, A. W., Edler, M., Grießer, T., Pacher, P., Haase, A., Stadlober, B., Belegratis, M. R., Trimmel, G. & Zojer, E., 2010, In: Applied physics letters. 96, p. 213303-ff

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Photochemisches Vernetzungsverfahren für Naturkautschuk-Latex (cover page)

    Schloegl, S. & Kern, W., 2010, In: Kautschuk, Gummi, Kunststoffe. p. 1-1

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Photolithographic Micro-patterning of Polymers for Optical Applications

    Köpplmayr, T., Grießer, T., Cardinale, M., Rath, T., Jakopic, G., Trimmel, G. & Kern, W., 2010, Book of Abstracts. p. 31-31

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Photolithographic Micro-patterning of Polymers for Optical Applications

    Köpplmayr, T., 2010, 107 p.

    Research output: Thesis › Master's Thesis

  47. Published

    Photolithographic Patterning of Polymer Surfaces Using the Photo-Cleavage Reaction of ortho-Nitrobenzyl Ester

    Edler, M., Jäger, M., Marchl, M., Zojer, E., Trimmel, G., Kern, W. & Grießer, T., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Photoreactive molecular layers containing aryl ester units: Preparation, UV patterning and post-exposure modification

    Höfler, T., Track, A. M., Pacher, P., Shen, Q., Flesch, H.-G., Hlawacek, G., Koller, G., Ramsey, M. G., Schennach, R., Resel, R., Teichert, C., Kern, W., Grießer, T. & Trimmel, G., 2010, In: Materials chemistry and physics (including materials science communications ; an international interdisciplinary journal on science, characterization and processing of advanced materials). 119, p. 287-293

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Photoreactive styrene and silicone polymers bearing 4-(n,N-diphenylamino)phenyl benzoate units: one-photon and two-photon reactions

    Daschiel, U., Jakopic, G., Satzinger, V., Schmidt, V. & Kern, W., 2010, In: Polymer.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Photoreaktives Polymer

    Grießer, T. (Inventor), Radl, S. V. (Inventor) & Kern, W. (Inventor), 2010, Patent No. A361/2010

    Research output: Patent

  51. Published

    Photosensitive Thin Polymer Films for Application in Organic Field Effect Transistors (OTFTs)

    Edler, M., Kern, W., Trimmel, G., Pavitschitz, A., Shen, Q., Teichert, C., Flesch, H.-G., Ausserlechner, S. J., Marchl, M., Zojer, E., Resel, R. & Grießer, T., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  52. Published

    Physical characterization of EVA embedding materials for solar cells

    Grabmayer, K., Wallner, G. & Oreski, G., 2010, Proceedings of 25th PVSEC 2010. p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Physical model for the expansion injection molding process and degradation effects on the injection molded parts

    Friesenbichler, W., Rajganesh Jegadeesan, X., Steinbichler, G. & Aust, N., 2010, 4th International PMI Conference - Conference Proceedings. p. 220-226

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Physikalische Charakterisierung des Vernetzungsgrades von EVA Einbettmaterialien für Solarzellen

    Grabmayer, K. S., 2010

    Research output: Thesis › Master's Thesis

  55. Published

    Polyethylene close-fit-liner - material properties and long-term failure behavior

    Frank, A., Hofmann, A., Haager, M. & Pinter, G., 2010, proceedings of Plastic Pipes XV Conference 2010. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Praxisnahe Charakterisierung von Kunststoffen fluidischer Systeme von Analysatoren hinsichtlich Sauerstoffaustauschvorgängen

    Knausz, M., 2010, 99 p.

    Research output: Thesis › Master's Thesis

  57. Published

    Praxisnahe Viskositäten für die Simulation

    Friesenbichler, W., Duretek, I. & Rajganesh Jegadeesan, X., 2010, In: Kunststoffe. 3, p. 37-40

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Pre-vulcanization of natural rubber latex by UV techniques: a process towards reducing type IV chemical sensitivity of latex articles

    Schloegl, S., Temel, A., Schaller, R., Holzner, A. & Kern, W., 2010, In: Rubber chemistry and technology. 83, p. 133-148

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Prevulcanization of natural rubber latex by UV techniques: a process towards reducing type IV chemical sensitivity of latex articles

    Kern, W., Temel, A., Schaller, R., Holzner, A. & Schlögl, S., 2010, In: Rubber chemistry and technology. 83, p. 133-148

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Qualification of Polymeric Components for Use in PV Modules: Identification and Evaluation of Appropriate Degradation Indicators

    Oreski, G., Möller, K. & Wallner, G., 2010, Proceedings of 25th PVSEC 2010. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Qualitative Untersuchungen an 7 Polyethylen-Proben

    Aust, N., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  62. Published

    Ranking of PE pipe materials

    Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  63. Published

    Real-time characterization of polypropylene nanocomposites in a corotating twin screw extruder

    Laske, S., Witschnigg, A., Kracalik, M., Feuchter, M., Pinter, G., Maier, G. A., Langecker, G. & Holzer, C., 2010, Proceedings ANTEC 2010. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Refractive index and waveguide patterning of polynorbornene copolymers bearing 4-(N,N-diphenylamino)phenyl benzoate units

    Daschiel, U., Führer, R., Bauer, T., Jakopic, G., Satzinger, V., Schmidt, V. & Kern, W., 2010, In: Macromolecular chemistry and physics.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Reversible Photoreactions in Polynorbornenes bearing Spiropyran Side Groups and their Application in Organic-Thin-Film Transistors

    Hauser, L., Kirnstötter, S., Marchl, M., Zojer, E., Fian, A., Grießer, T., Kern, W. & Trimmel, G., 2010, Book of Abstracts. p. 9-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Schlagbiegeversuche an 4 UP-Harztypen bei 4 Temperaturen

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  67. Published

    Shore Härteprüfung an POM Bauteilen

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  68. Published

    Simulation of the Heating of Sheets using IR-Radiation

    Fertschej, A., Langecker, G. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 114-114

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Simulation of the Heating of Sheets using IR-Radiation

    Fertschej, A., Langecker, G. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  70. Published

    Simulation von Druckstößen an Rohrverbindungen

    Stelzer, S. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  71. Published

    Standard-Zugversuche an 5 GFK-Rohrwerkstoffen

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  72. Published

    Standard-Zugversuche an PVC (3 Werkstoffzustände)

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  73. Published

    Strain determination of polymeric materials using digital image correlation

    Jerabek, M., Major, Z. & Lang, R., 2010, In: Polymer Testing. p. 407-416

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Structural influence of layered silicates on mechanical properties in polypropylene nanocomposites

    Feuchter, M., Maier, G. A., Pinter, G., Laske, S. & Kracalik, M., 2010, proceedings of 14th intern.Conference Polymeric Materials. p. 195-198

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Structure of Pentacene Thin Films Deposited on Organic Dielectrics

    Moser, A., Flesch, H.-G., Neuhold, A., Edler, M., Grießer, T., Marchl, M., Trimmel, G., Haase, A., Smilgies, D.-M., Zojer, E. & Resel, R., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  76. Published

    Studies on the surface tension of corona-treated ABS surfaces

    Fankhauser, P., Kappacher, J. & Kern, W., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  77. Published

    Substitution konventioneller Werkstoffe in handgeführten Elektrowerkzeugen

    Stock, A., 2010

    Research output: Thesis › Master's Thesis

  78. Published

    Surface modification of polyethylene by sulfonation: a comparison between electron-beam crosslinked and non-crosslinked LDPE

    Kern, W. & Temmel, S., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  79. Published

    Survey of chemical residues and biological evaluation of photochemically pre-vulcanized surgical gloves

    Aust, N., Temel, A., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 2010, In: Monatshefte für Chemie = Chemical monthly. 141, p. 1365-1372

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    tabularborder

    Fink, J., 2010

    Research output: Non-textual form › Software › Transfer

  81. Published

    The abrasive wear of plastic mould steels as a function of steel hardness

    Oláh, L., Friesenbichler, W. & Zinner, S., 2010, Book of Abstracts. p. 112-113

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    The abrasive wear of plastic mould steels as a function of steel hardness

    Oláh, L., Friesenbichler, W. & Zinner, S., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  83. Published

    Theoretische und experimentelle Betrachtung eines kämmend konisch gleichlaufenden Doppelschneckenextruders

    Schuschnigg, S., Selvasankar, R. K. & Klammer, G., 2010, In: VLK-News. p. 16-17

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Theoretische Untersuchung der Einbettung von keramischen Komponenten in Leiterplatten

    Pletz, M., 2010

    Research output: Thesis › Master's Thesis

  85. Published

    Thermal and mechanical properties of biodegradable polyolefin-chlorella compounds

    Piontek, M., Laske, S., Rieß, G., Feuchter, M. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 75-75

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Thermo-mechanische Charakterisierung von PA-GF

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  87. Published

    Three dimensional modelling of flow in the pressure build-up zone of the new conical co-rotating twin screw extruder

    Selvasankar, R. K. & Schuschnigg, S., 2010, Book of Abstracts. p. 25-25

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Time-Dependent Characterization of Viscoelastic Materials

    Tscharnuter, D., 2010, 96 p.

    Research output: Thesis › Doctoral Thesis

  89. Published

    Tuning mobility ans threshold voltage of Organic Thin Film Transistors by Photoreactive Polymer Interfacial Layers

    Marchl, M., Grießer, T., Edler, M., Golubkov, A. W., Pacher, P., Ausserlechner, S. J., Obermüller, T., Haase, A., Stadlober, B., Trimmel, G. & Zojer, E., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  90. Published

    Tuning the device properties of Organic Thin Film Transistors by Photoreactive Interfacial Layers

    Marchl, M., Grießer, T., Edler, M., Golubkov, A. W., Pacher, P., Ausserlechner, S. J., Obermüller, T., Haase, A., Stadlober, B., Trimmel, G. & Zojer, E., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  91. Published

    Tuning the Threshold Voltage in Organic Thin-Film Transistors by Local Channel Doping Using Photoreactive Interfacial Layers

    Marchl, M., Edler, M., Haase, A., Fian, A., Trimmel, G., Grießer, T., Stadlober, B. & Zojer, E., 2010, In: Advanced materials. 22, 47, p. 5361-5365

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Two-photon patterning of optical waveguides in silicon based flexible polymers

    Woods, R., Langer, G., Satzinger, V. & Kern, W., 2010, Book of Abstracts. p. 29-29

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Ultra violet light sensitive polymer as gate dielectric in organic field effect transistors

    Ramil, A. M., Grießer, T., Sariciftci, N. S., Kern, W., Shen, Q. & Teichert, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  94. Published

    Understanding the Origin of Threshold-Voltage Shifts in Organic Thin Film Transistors Induced by Interfacial Layers

    Ausserlechner, S. J., Marchl, M., Pacher, P., Hauser, L., Obermüller, T., Golubkov, A., Haase, A., Stadlober, B., Buchner, M., Edler, M., Flesch, H.-G., Grießer, T., Trimmel, G., Resel, R., Zojer, K., Schürrer, F. & Zojer, E., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  95. Published

    Uniaxial compression testing of polymeric materials

    Jerabek, M., Major, Z. & Lang, R., 2010, In: Polymer Testing. p. 302-309

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Untersuchung der Molmassenverteilung von 8 Silikon-Elastomeren

    Aust, N., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  97. Published

    Untersuchungen zur Druck- und Temperaturabhängigkeit der Viskosität und der Wärmeleitfähigkeit von polymeren Werkstoffen

    Narnhofer, M., 2010

    Research output: Thesis › Master's Thesis

  98. Published

    Untersuchung von quasi-spröden Schädigungsmechanismen in zyklisch und statisch belasteten Prüfkörpern aus Polyethylen

    Bruckmoser, K., 2010, 71 p.

    Research output: Thesis › Master's Thesis

  99. Published

    UV-induced refractive index modulation of photoreactive polymers bearing N-acylcarbazole groups

    Griesser, T., Wolfberger, A., Edler, M., Belzik, M., Jakopic, G., Trimmel, G. & Kern, W., 2010, In: Journal of polymer science : A, Polymer chemistry. 48, p. 3507-3514

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    UV Reactive Flexible Polynorbornenes with Tunable Refractive Index

    Daschiel, U., Bauer, T., Jakopic, G., Satzinger, V., Schmidt, V. & Kern, W., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  101. Published

    UV-reaktive flexible Polynorbornene mit veränderbarem Brechungsindex: Experimental

    Führer, R. (Co-editor), Daschiel, U. (Co-editor), Bauer, T. (Co-editor), Jakopic, G. (Co-editor), Satzinger, V. (Co-editor), Schmidt, V. (Co-editor) & Kern, W. (Co-editor), 2010, Eigenverlag.

    Research output: Book/Report › Book › Research

Previous 1...28 29 30 31 32 33 34 35 ...42 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301