Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

1701 - 1800 out of 4,192Page size: 100

Research output

  1. 2016
  2. Published

    iPrint - Personalisierte Kranialimplantate mittels Fused Filament Fabrication

    Katschnig, M., Haar, B., Holzer, C., Ücal, M., Schäfer, U., von Campe, G. & Zefferer, U., 14 Apr 2016, 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt. Leoben, Vol. 06. p. 121-125 5 p. (Schriftenreihe Kunststofftechnik Leoben).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Neuartige Elastomerwerkstoffe auf Basis von Nanocompositen

    Ziegler, W., Rieß, G. (Co-editor), Winter, J. (Co-editor), Kopeinig, S. (Co-editor), Dietrich, M. (Co-editor), Resch-Fauster, K. (Co-editor), Kern, W. (Co-editor) & Pinter, G. (Co-editor), 14 Apr 2016, 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt: Schriftenreihe Kunststofftechnik Leoben. Pinter, G. & Pilz, G. (eds.). Leoben, Vol. 6. p. 209-210 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Neue additive Produktionstechnologien für die Holzindustrie

    Duretek, I., Müller, U., Veigel, S., Haider, A., Frybort, S. & Holzer, C., 14 Apr 2016, p. 185-186. 2 p.

    Research output: Contribution to conference › Abstract

  5. Published

    Neue additive Produktionstechnologien für die Holzindustrie

    Duretek, I., Müller, U., Veigel, S., Haider, A., Frybort, S. & Holzer, C., 14 Apr 2016. 1 p.

    Research output: Contribution to conference › Poster › Research

  6. Published

    Rec2TecPart - Ein neuer Prozess für Funktionsbauteile aus Sekundärrohstoffen

    Katschnig, M., Brendinger, C. & Holzer, C., 14 Apr 2016, p. 193-194. 2 p.

    Research output: Contribution to conference › Poster › Research

  7. Published

    Fused Filament Fabrication for Metallic Parts

    Gonzalez-Gutierrez, J., Kukla, C., Schuschnigg, S., Duretek, I. & Holzer, C., Apr 2016, p. 1.

    Research output: Contribution to conference › Poster › Research

  8. Published

    Photopolymerisierbare Monomere für den 3D Druck von biokompatiblen Strukturen

    Oesterreicher, A., Wiener, J., Roth, M., Moser, A., Mostegel, F., Edler, M., Pinter, G. & Grießer, T., Apr 2016, Schriftenreihe Kunststofftechnik Leoben: 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt. Vol. 6. p. 127-131

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Biocompatibility of FDM printed PEEK is comparable to cranial bone properties; FDM printed PEEK is thereby a suitable material for cranial implants

    Schäfer, U., von Campe, G., Ücal, M., Tax, A., Katschnig, M. & Holzer, C., 30 Mar 2016, Front. Bioeng. Biotechnol. Conference Abstract: 10th World Biomaterials Congress.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Durchgängige Simulationskette von der Konstruktion bis zur Spannungsbewertung

    Mösenbacher, A., Lucyshyn, T., Pußwald, S. & Primetzhofer, A., 15 Mar 2016, p. 1. 28 p.

    Research output: Contribution to conference › Presentation › Research

  11. Published

    Neue Materialien im Fused Filament Fabrication (FFF) Verfahren

    Schuschnigg, S., 11 Mar 2016.

    Research output: Contribution to conference › Presentation › Transfer

  12. Published

    Kunststoffe - Fluch oder Segen?

    Lucyshyn, T., 3 Mar 2016.

    Research output: Contribution to conference › Presentation › Research

  13. Published

    Grundlage für eine erfolgreiche Verarbeitung - genaue Materialkenntisse

    Holzer, C., 2 Mar 2016.

    Research output: Contribution to conference › Presentation › Research

  14. Published

    Die Faserorientierung auf dem Prüfstand – Hinterfragung der Erwartungshaltung in der Lebensdauerabschätzung

    Mösenbacher, A., Müller, F., Primetzhofer, A. & Lucyshyn, T., 26 Feb 2016. 16 p.

    Research output: Contribution to conference › Presentation › Research

  15. Published

    Simulation des Einflusses der thermischen Eigenschaften des Werkzeugstahls auf den Spritzgießprozess

    Lucyshyn, T., 26 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  16. Published

    Vorrichtung und Verfahren zum Faserspritzgießen von Spritzgussteilen

    Friesenbichler, W. (Inventor), Bodor, C. (Inventor), Schadler, W. (Inventor) & Bevc, F. (Inventor), 18 Feb 2016, IPC No. B29C45/00, B29C45/33, Patent No. DE102014210295 A8

    Research output: Patent

  17. Published

    Wetting behavior of polymer melts on coated and uncoated tool steel surfaces

    Zitzenbacher, G., Huang, Z., Längauer, M., Forsich, C. & Holzer, C., 16 Feb 2016, In: Journal of Applied Polymer Science. 133.2016, 21, 10 p., 43469.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Cyclic fatigue delamination of carbon fiber-reinforced polymer-matrix composites: Data analysis and design considerations

    Brunner, A. J., Stelzer, S., Pinter, G. G. & Terrasi, G. P., Feb 2016, In: International Journal of Fatigue. 83.2016, Part 2, February, p. 293-299 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Method for modifying the surface of an elastomer product

    Holzner, A. (Inventor), Kern, W. (Inventor), Lenko, D. (Inventor), Manhart, J. C. (Inventor), Schaller, R. (Inventor) & Schlögl, S. (Inventor), 29 Jan 2016, IPC No. C08K 9/ 04 A I, Patent No. PL2719720T, Priority date 9 Oct 2013, Priority No. EP20130187837

    Research output: Patent

  20. Published

    Adsorption Studies of Organophosphonic Acids on Differently Activated Gold Surfaces

    Niegelhell, K., Leimgruber, S., Grießer, T., Brandl, C., Chernev, B., Schennach, R., Trimmel, G. & Spirk, S., 26 Jan 2016, In: Langmuir. 32.2016, 6, p. 1550-1559 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. E-pub ahead of print

    A novel online rheometer for elongational viscosity measurement of polymer melts

    Köpplmayr, T., Luger, H.-J., Burzic, I., Battisti, M., Perko, L., Friesenbichler, W. & Miethlinger, J., 23 Jan 2016, (E-pub ahead of print) In: Polymer Testing. 50.2016, April, p. 208-215 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Assessing the reliability of filling simulations for RTM: Critical comparison of theoretical and realistic permeability of typical curvatures encountered in RTM preforms

    Konstantopoulos, S. & Schledjewski, R., 1 Jan 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Bottom-up parametric hybrid cost estimation for composite aerospace production

    Hueber, C., Horejsi, K. & Schledjewski, R., 1 Jan 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Reactive cellulose-based thin films-a concept for multifunctional polysaccharide surfaces

    Elschner, T., Reishofer, D., Kargl, R., Grießer, T., Heinze, T. & Kleinschek, K. S., 1 Jan 2016, In: RSC Advances. 6, 76, p. 72378-72385 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    25. Leobener Kunststoff Kolloquium "Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt"

    Pinter, G., Pilz, G. & Payer, M., 2016, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  26. Published

    Accelerated Aging of Polyolefin Pipe Materials in Chlorinated Water

    Bredacs, M., Redhead, A., Frank, A. & Pinter, G., 2016.

    Research output: Contribution to conference › Poster › Research

  27. Published

    Advanced Materials via thiol-ene click reactions

    Sahin, M., Kern, W. & Schlögl, S., 2016.

    Research output: Contribution to conference › Poster › Research

  28. Published

    A model-based concept for an optimized resin transfer moulding process

    Hergan, P., Fauster, E. & Schledjewski, R., 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    An Adaptable Semi-Numerical Hyperelastic Model for the Simulation of High-Pressure Forming

    Tscharnuter, D., Truskiewics, E. & Pinter, G., 2016, Proceedings ICCM 2016 International Conference on Computational Mechanics. p. 1114

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    A nonlinear viscoelastic constitutive model for polymeric solids based on multiple natural configuration theory

    Muliana, A., Rajagopal, K. R., Tscharnuter, D. & Pinter, G., 2016, In: International journal of solids and structures. 100-101, p. 95 110 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    A Novel UV Tunable and Patternable Polyaniline Derivate as a Charge Injection Layer in OLEDs

    Simone, R., Grießer, T., Edler, M., Kern, W., Rath, T., Trimmel, G., Pavitschitz, A., Teichert, C., Simbrunner, C., Schwabegger, G. & Sitter, H., 2016.

    Research output: Contribution to conference › Poster › Research

  32. Published

    A simplified dynamic finite element model for the impact of a wheel on a crossing: Validation and parameter study

    Wiedorn, J., Daves, W., Ossberger, H. & Pletz, M., 2016, In: Civil-Comp Proceedings. 110

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Auswirkung der Materialeigenschaften von ungefüllten und holzgefüllten Biopolymeren für die Anwendung von Fused Filament Fabrication

    Mooslechner, P., 2016

    Research output: Thesis › Master's Thesis

  34. Published

    Carbon microparticles from organosolv lignin as filler for conducting Poly(lactic acid)

    Köhnke, J., Fürst, C., Unterweger, C., Rennhofer, H., Lichtenegger, H. C., Keckes, J., Emsenhuber, G., Mahendran, A. R., Liebner, F. & Gindl-Altmutter, W., 2016, In: Cellular polymers. 8, 6

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Charakterisierung eines im RTM-Prozess hergestellten CFK-Metall-Leichtbauwerkstoffes

    Brandstetter, D., 2016

    Research output: Thesis › Master's Thesis

  36. Published

    Compoundierung von Filamenten für medizinische FFF-Anwendungen

    Payr, B., 2016

    Research output: Thesis › Master's Thesis

  37. Published

    Concept of fatigue design methodology for short fibre reinforced polymers considering environmental conditions

    Primetzhofer, A., Mösenbacher, A., Pinter, G. & Haslinger, T., 2016, In: AIP Conference Proceedings. 1779, 050012.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Controlled morphology evolution of PLA via rapid heat cycle molding

    Hutterer, T., 2016

    Research output: Thesis › Master's Thesis

  39. Published

    Correlation of epoxy material properties with the toughening effect of fullerene-like WS2 nanoparticles

    Haba, D., Brunner, A., Barbezat, M., Spetter, D., Tremel, W. & Pinter, G., 2016, In: European polymer journal. 84, p. 125 136 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Correlation study of damp heat and pressure cooker testing on backsheets

    Ottersböck, B., Oreski, G. & Pinter, G., 2016, In: Journal of Applied Polymer Science. 133, 47, 44230.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Coupled Orientation and Stretching of Chains in Mesoscale Models of Polydisperse Linear Polymers in Startup of Steady Shear Flow Simulations

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2016, In: Macromolecular Theory and Simulations.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Coupling of functionalised PTHF to amine-modified silica particles via aza-Michael reaction

    Winter, J., 2016

    Research output: Thesis › Master's Thesis

  43. Published

    Damage mechanics of composites under fatigue loads

    Rieser, R., 2016

    Research output: Thesis › Master's Thesis

  44. Published

    Data on synthesis and thermo-mechanical properties of stimuli-responsive rubber materials bearing pendant anthracene groups

    Manhart, J. C., Ayalur Karunakaran, S., Radl, S., Oesterreicher, A., Moser, A., Ganser, C., Teichert, C., Pinter, G. G., Kern, W., Grießer, T. & Schlögl, S., 2016, In: Data in Brief. 2016, 9, p. 524-529

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Data on synthesis and thermo-mechanical properties of stimuli-responsive rubber materials of pendant anthracene groups

    Manhart, J., Ayalur-Karunakaran, S., Radl, S. V., Oesterreicher, A., Moser, A., Ganser, C., Teichert, C., Pinter, G., Kern, W., Grießer, T. & Schlögl, S., 2016, In: Data in Brief. 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Design and application of photo-reversible elastomer networks by using the [4πs+4πs] cycloaddition reaction of pendant anthracene groups

    Manhart, J., Ayalur-Karunakaran, S., Oesterreicher, A., Radl, S. V., Moser, A., Ganser, C., Teichert, C., Pinter, G., Kern, W., Grießer, T. & Schlögl, S., 2016, In: Polymer. 102.2016, October, p. 10-20 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Design and development of a testing machine for compressive creep tests on polymers at elevated temperatures

    Brunbauer, S., 2016

    Research output: Thesis › Master's Thesis

  48. Published

    Determination of a robust process for a union nut. Why d-optimal DoE did not solve random impact behavior?

    Steffel, C., Berger, G. & Friesenbichler, W., 2016, In: AIP Conference Proceedings. 1779

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Development and implementation of an accelerated method for chlorine dioxide exposure

    Bredacs, M., Redhead, A., Frank, A., Bastero, A. & Pinter, G., 2016, In: AIP Conference Proceedings. 1779, 070009.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Development and implementation of sensing applications for fiber reinforced polymeric composites

    Konstantopoulos, S., 2016

    Research output: Thesis › Doctoral Thesis

  51. Published

    Dissipative Particle Dynamics Models of Orientation of Weakly-Interacting Anisometric Silicate Particles in Polymer Melts under Shear Flow: Comparison with the Standard Orientation Models

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2016, In: Macromolecular Theory and Simulations.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Dissipative particle dynamics simulations of orientation of layered silicate particles embedded in polymer melts under shear flows

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2016, In: AIP Conference Proceedings. 050010.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Effect of repair design and surface treatment on adhesively bonded composite repairs

    Röper, F., Wolfahrt, M., Kucher, G., Bubestinger, A. & Pinter, G., 2016.

    Research output: Contribution to conference › Poster › Research

  54. Published

    Effect of repair design and surface treatment on adhesively bonded composite repairs

    Röper, F., Wolfahrt, M., Kucher, G., Bubestinger, A. & Pinter, G., 2016, Proceedings ECCM 17. 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Einfluss verschiedenster Modifizierungen auf das Sedimentationsverhalten von Bornitrid für die Verwendung in Beschichtungssystemen

    Andraschek, N., Ebner, C., Schweiger, M., Rieß, G. & Kern, W., 2016.

    Research output: Contribution to conference › Poster › Research

  56. Published

    Entwicklung und konstruktive Umsetzung serientauglicher Werkzeuglösungen für die In-situ-Polymerisation von Caprolactam zur Herstellung faserverstärkter Thermoplastbauteile

    Schoefer, G., 2016

    Research output: Thesis › Master's Thesis

  57. Published

    Epoxy/glass fibres laminates with integrated layer of carbon tubes decorated by Ag clusters for deformation detection

    Lloret Pertegas, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  58. Published

    Erhöhung der Bindenahtfestigkeit von Spritzgießbauteilen mit Hilfe eines In-Mould-Aktuatorik Werkzeuges

    Erhart, M., 2016

    Research output: Thesis › Master's Thesis

  59. Published

    Evaluation of Mechanical Strength of Miniaturized Functional Substrates and Components in Different Environments

    Bermejo, R., Krautgasser, C., Deluca, M., Pletz, M., Supancic, P., Aldrian, F. & Danzer, R., 2016, In: Journal of Microelectronics and Electronic Packaging. 13, 1, p. 17-22 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Exploring Network Formation of Tough and Biocompatible Thiol-yne Based Photopolymers

    Oesterreicher, A., Gorsche, C., Ayalur-Karunakaran, S., Moser, A., Edler, M., Pinter, G., Schlögl, S., Liska, R. & Grießer, T., 2016, In: Macromolecular rapid communications. 37

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Exploring thiol-yne based monomers as low cytotoxic building blocks for radical photopolymerization

    Oesterreicher, A., Ayalur-Karunakaran, S., Moser, A., Mostegel, F., Edler, M., Kaschnitz, P., Pinter, G., Trimmel, G., Schlögl, S. & Grießer, T., 2016, In: Journal of polymer science : A, Polymer chemistry. 54, p. 3484-3494

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Exploring thiol-yne based monomers as low cytotoxic building blocks for radical photopolymerization;

    Oesterreicher, A.; Ayalur-Karunakaran, S.; Moser, A.; Mostegel, F.H.; Edler, M.; Kaschnitz, P.; Pinter, G.; Trimmel, G.; Schlögl, S.; Griesser, T., 2016, In: Journal of polymer science : A, Polymer chemistry. 54, , 21, p. 3484-3494.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Filling Behavior of Wood Plastic Composites

    Duretek, I., Lucyshyn, T. & Holzer, C., 2016, In: Journal of Civil Engineering and Architecture. 10, p. 1236-1243 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Film formation and network characteristics of thiol-ene elastomers

    Trutschel, M., Chassé, W., Schaller, R., Holzner, A., Rieß, G., Kern, W. & Saalwächter, K., 2016.

    Research output: Contribution to conference › Presentation › Research

  65. Published

    Guide to the practical use of chemicals in refineries and pipelines

    Fink, J., 2016, Burlington, MA: Elsevier.

    Research output: Book/Report › Book › Research

  66. Published

    Herstellung und Charakterisierung von Verbundwerkstoffen aus thermoplastischen Biopolymeren und pflanzlichen Kurzfasern

    Gerstbauer, F., 2016

    Research output: Thesis › Master's Thesis

  67. Published

    Herstellung und Recyclingfähigkeit von Kunststoffverbunden

    Kern, W., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  68. Published

    High Performance Additives

    Fink, J., 2016, Wiley-VCH .

    Research output: Book/Report › Book › Research

  69. Published

    High temperature phase change materials for the overheating protection if facade integrated solar thermal collectors, Energy and Buildings

    Hengstberger, F., Zauner, C., Resch-Fauster, K., Holper, S. & Grobbauer, M., 2016, In: Energy and Buildings. 124

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Impact of the acrylonitrile content on the mechanical performance of elastomeric materials

    Schrittesser, B., Pinter, G., Schwarz, T., Kadar, Z. & Nagy, T., 2016, In: Rubber, fibres, plastics international. p. 40 - 47

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Implementation of a New Chlorine Dioxide Device for Accelerated Aging of Polyolefin Pipe Materials

    Bredacs, M., Redhead, A., Frank, A., Bastero, A. & Pinter, G., 2016, Proceedings Plastics Pipes XVIII. 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Improvement of the physical-mechanical and optical properties of the packaging production through coating with aqueous polymer dispersion in accordance with the environmental protection requirements

    Bozhkova, T., Boeva, R., Spiridonov, I., Nedelchev, Y., Sapkota, J., Kašiković, N., Dedijer, S. & Pal, M., 2016.

    Research output: Contribution to conference › Poster › Research

  73. Published

    Influence of backsheet type on formation of acetic acid in PV modules

    Mihaljevic, A., Oreski, G. & Pinter, G., 2016, Proceedings PVSEC.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Influence of backsheet type on formation of acetic acid in PV modules

    Mihaljevic, A., Oreski, G. & Pinter, G., 2016.

    Research output: Contribution to conference › Poster › Research

  75. Published

    Influence of cyclic stress intensity threshold on the scatter seen in cyclic Mode I fatigue delamination growth in DCB tests

    Mujtaba, A., Stelzer, S., Brunner, A. & Jones, R., 2016, In: Composite structures.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Influence of elongational flow generating nozzles on material properties of polypropylene nanocomposites. Part I

    Battisti, M., Perko, L., Arunachalam, S., Stieger, S. & Friesenbichler, W., 2016, In: Polymer engineering and science. p. n/a-n/a

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Influence of the Processing conditions on morphology and fracture mechanical properties of unfilled polyoxymethylene (POM)

    Halb, M., 2016

    Research output: Thesis › Master's Thesis

  78. Published

    Influence of thermo-oxidative ageing of HNBR in oil field applications

    Balasooriya, W., Schrittesser, B., Ayalur-Karunakaran, S., Schlögl, S., Pinter, G., Schwarz, T. & Kadar, Z., 2016.

    Research output: Contribution to conference › Poster › Research

  79. Published

    Inorganic geochemical components of Paleozoic source rocks associated with basin stratigraphy and depositional processes

    Wegerer, E., Aust, N. & Rachetti, A., 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  80. Published

    Investigation of temporary binding pressure sensitive adhesives comprising external triggered release

    Christine, B., Schlögl, S., Feldbacher, S. & Kern, W., 2016.

    Research output: Contribution to conference › Poster › Research

  81. Published

    Investigation of temporary binding pressure sensitive adhesives comprising external triggered release

    Bandl, C., Schlögl, S., Feldbacher, S. & Kern, W., 2016, Proceedings of the 11th European Adhesion Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Lifetime of polyethylene geomembranes for water proofing of tunnels

    Haager, M., Nitsche, D., Bredács, M., Frank, A. & Pinter, G., 2016, ITA-AITES World Tunnel Congress 2016, WTC 2016. Society for Mining, Metallurgy and Exploration, Vol. 2. p. 1262-1271 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Lignocellulose Nanofiber-Reinforced Polystyrene Produced from Composite Microspheres Obtained in Suspension Polymerization Shows Superior Mechanical Performance

    Ballner, D., Herzele, S., Keckes, J., Edler, M., Griesser, T., Saake, B., Liebner, F., Potthast, A., Paulik, C. & Gindl-Altmutter, W., 2016, In: ACS Applied Materials & Interfaces. 8, 21, p. 13520-13525 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Lithofacial characteristics of Devonian to Bashkirian black shales and the sedimentary environment of the Dniepr-Donets Basin, Ukraine

    Wegerer, E. & Aust, N., 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  85. Published

    Low migration type I photoinitiators for biocompatible thiol-ene formulations

    Oesterreicher, A., Roth, M., Hennen, D., Mostegel, F., Edler, M., Kappaun, S. & Grießer, T., 2016, In: European polymer journal. 88, 3, p. 393 - 402 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Mechanical Properties of Composites Used in High-Voltage Applications

    Moser, A. & Feuchter, M., 2016, In: Polymers / Molecular Diversity Preservation International.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Mettallized and Magnetic Polymers

    Fink, J., 2016, Hoboken: Wiley-VCH .

    Research output: Book/Report › Book › Research

  88. Published

    Mica/Epoxy Composites in the Electrical Industry: Applications, Composits for Insulations, and Investigations on Failure Mechanisms for Prospective Optimizations

    Kern, W., Andraschek, N., Wanner, A. J., Ebner, C. & Rieß, G., 2016, In: Polymers. 8, 5, p. 201

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Microfibrillated Lignocellulose Enables the Suspension-Polymerisation of Unsaturated Polyester Resin for Novel Composite Applications

    Yutao Yan 1, Sabine Herzele 2, Arunjunai Raj Mahendran 2, Matthias Edler 3, Thomas Griesser 3, Bodo Saake 4, Jianzhang Li 1,* and Wolfgang Gindl-Altmutter 5,*, 2016, In: Polymers. 8, 255

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Modified Hartman-Schijve fitting of mode I delamination fatigue data and the resulting variation in threshold values Gthr

    Brunner, A., Mujtaba, A., Stelzer, S. & Jones, R., 2016, Procedia Structural Integrity. 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  91. Published

    Natural and artifical ageing on backsheets - Comparison of degradation effects

    Ottersböck, B., Oreski, G. & Pinter, G., 2016.

    Research output: Contribution to conference › Poster › Research

  92. Published

    Non-Contact Measurement of Circular Surfaces via Photometric Stereo in Polar Coordinates

    Radler, B., Harker, M., O'Leary, P. & Lucyshyn, T., 2016

    Research output: Other contribution › Research

  93. Published

    Optimierte Entformung mikrostrukturierter Spritzgussbauteile durch Werkzeugbeschichtungen

    Windischbauer, L., 2016

    Research output: Thesis › Master's Thesis

  94. Published

    Optimisation of the winding process by minimizing the critical failure potential during fibre roving delivery

    Maier, A., 2016

    Research output: Thesis › Doctoral Thesis

  95. Published

    Optimization of twin screw extrusion using CFD for polymer/nanoclay composites

    Schuschnigg, S., Battisti, M., Winkler-Ebner, J., Friesenbichler, W. & Holzer, C., 2016, In: AIP Conference Proceedings.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Photoreversible Crosslinking of Elastomeric Materials Comprising Spatially Resolved Switchable Characteristics

    Kaiser, S., Manhart, J. C., Ayalur Karunakaran, S., Moser, A., Oesterreicher, A., Pinter, G. G., Teichert, C., Grießer, T., Kern, W. & Schlögl, S., 2016.

    Research output: Contribution to conference › Poster › Research

  97. Published

    Polybutylensuccinat als potentieller Substitutionswerkstoff für Polypropylen und Polybuten

    Klutz, A., 2016

    Research output: Thesis › Master's Thesis

  98. Published

    Polyvinylalkohol und Poly(vinylalkohol-co-vinylamin) als Barrierematerialien zur Optimierung der Permeationseigenschaften von Polymerverbunden

    Kramer, R., 2016

    Research output: Thesis › Doctoral Thesis

  99. Published

    Properties of Polymer Composites Used in High-Voltage Applications

    Plesa, G.-I., Noţingher, P., Schlögl, S., Sumereder, C. & Muhr, M., 2016, In: Polymers. 2016, 8

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Rapid Gas Decompression Performance of elastomers - A study of influencing testing parameters

    Schrittesser, B., Pinter, G., Schwarz, T., Kadar, Z. & Nagy, T., 2016, In: Procedia Structural Integrity. 2, p. 1746-1754 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Residual lifetime determination of low temperature co-fired ceramics

    Majer, Z., Štegnerová, K., Hutar, P., Pletz, M., Bermejo, R. & Náhlík, L., 2016, Advances in Fracture and Damage Mechanics XV. Trans Tech Publications, Vol. 713. p. 266-269 4 p. (Key Engineering Materials; vol. 713).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...14 15 16 17 18 19 20 21 ...42 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301