Department Physics, Mechanics and Electrical Engineering

Organisational unit: Departments and Institutes

751 - 800 out of 2,058Page size: 50

Research output

  1. 2014
  2. Published

    Fractional Slot Winding versus Distributed Winding using Winding Function Method

    Krall, R., Krenn, J. & Schmid, A., 2014, Optimization of Electrical and Electronic Equipment (OPTIM), 2014 14th International Conference on. p. 437-444

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Generalization of the Lifshitz–Slyozov–Wagner Coarsening Theory to Non-dilute Multi-component Systems

    Svoboda, J. & Fischer, F. D., 2014, In: Acta materialia. 79, p. 304-314

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Growth limit of carbon onions – A continuum mechanical study

    Todt, M., Bitsche, R. D., Hartmann, M., Fischer, F. D. & Rammerstorfer, F. G., 2014, In: International journal of solids and structures. 51, p. 706-715

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    High-Performance Lawn-Mower Prototype with Re-Used Lithium Ion Phosphate Battery

    Weiß, H., Schopf, K. & Zarkar, M., 2014, APEIE Proceedings. p. 785-788

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Humidity-driven deformation of ordered mesoporous silica films

    Sharifi Rajabi, P., Marmiroli, B., Sartori, B., Cacho-Nerin, F., Keckes, J., Amenitsch, H. & Paris, O., 2014, In: Bioinspired, Biomimetic and Nanobiomaterials. 3, p. 183-190

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Imaging of the formerly bonded area of individual fibre to fibre joints with SEM and AFM

    Fischer, W., Zankel, A., Ganser, C., Schmied, F., Schröttner, H., Hirn, U., Teichert, C., Bauer, W. & Schennach, R., 2014, In: Cellulose. 21, p. 251-260

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Influence of sacrificial bonds on the mechanical behaviour of polymer chains

    Nabavi, S., Harrington, M. J., Fratzl, P. & Hartmann, M., 2014, In: Bioinspired, Biomimetic and Nanobiomaterials. 3, p. 139-145

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Influence of water on mechanical properties of cellulosic materials studied by AFM based methods

    Ganser, C., 2014

    Research output: Thesis › Doctoral Thesis

  10. Published

    In-Situ SAXS study on the ion dynamics in microporous carbon based supercapacitors

    Prehal, C., 2014, 115 p.

    Research output: Thesis › Diploma Thesis

  11. Published

    Insular Power Supply Battery Manager with Balancing and Protection Unit for Lithium-Ion Batteries

    Weiß, H. & Volgger, S., 2014, APEIE Proceedings. p. 789-792

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Inverted bulk-heterojunction solar cell with cross-linked hole-blocking layer

    Udum, Y., Denk, P., Adam, G., Apaydin, D. H., Nevosad, A., Teichert, C., White, M. S., Sariciftci, N. S. & Scharber, M. C., 2014, In: Organic electronics. 15, p. 997-1001

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Inverted bulk-heterojunction solar cell with cross-linked hole-blocking layer

    Nevosad, A. & Teichert, C., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    Island shape anisotropy in organic thin film growth induced by ion-beam irradiated rippled surfaces

    Kratzer, M., Wrana, D., Szajna, K., Krok, F. & Teichert, C., 2014, In: Physical chemistry, chemical physics : PCCP. 16, 47, p. 26112-26118

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Kinetics of the Austenite-to-Ferrite Phase Transformation - Simulations and Experiments

    Gamsjäger, E., Werner, R., Schiller, W. & Buchmayr, B., 2014, In: Steel research international. p. 131-142

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Layer Dependent Wetting in Parahexaphenyl Thin Film Growth on Graphene

    Kratzer, M., Klima, S., Teichert, C., Vasić, B., Matković, A., Milicevic, M. & Gajić, R., 2014, In: E-Journal of Surface Science and Nanotechnology. 12, p. 31-39

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Magnetic-field-induced ferroelectric polarization reversal in the multiferroic Ge1-xMnxTe semiconductor

    Przybylinska, H., Springholz, G., Lechner, R. T., Hassan, M., Wegscheider, M., Jantsch, W. & Bauer, G., 2014, In: Physical review letters. 12, p. 047202-1- 047202-6

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Magnetic force imaging of a chain of biogenic magnetite and Monte Carlo analysis of tip-particle interaction

    Körnig, A., Hartmann, M., Teichert, C., Fratzl, P. & Damien, F., 2014, In: Journal of physics / D, Applied physics. 47, p. 235403-1-235403-9

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Mechanik und Thermodynamik der Werkstoffe

    Gamsjäger, E., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Mechanisms of topography formation of magnetron-sputtered chromium-based coatings on epoxy polymer composites

    Lackner, J. M., Waldhauser, W., Ganser, C., Teichert, C., Kot, M. & Major, L., 2014, In: Surface & coatings technology. 241, p. 80-85

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Method development for the cyclic characterization of thin copper layers for PCB applications

    Fellner, K., Fuchs, P. F., Pinter, G., Antretter, T. & Krivec, T., 2014, In: Circuit World. 40, p. 53-60

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Micro four-point probe investigation of individual ZnO grain boundaries in avaristor ceramic

    Nevosad, A., Hofstätter, M., Supancic, P., Danzer, R. & Teichert, C., 2014, In: Journal of the European Ceramic Society. 34, p. 1963-1970

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Modeling the Accelerated Cooling Process in Heavy Steel Plate Production

    Essl, W., 2014

    Research output: Thesis › Doctoral Thesis

  24. Published

    Modelling of phase transformations and residual stress formation in hot-work tool steel components

    Schemmel, M., Prevedel, P., Schöngrundner, R., Ecker, W. & Antretter, T., 2014, European Conference of Heat Treatment and 21st IFHTSE Congress. p. 285-292

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Modelling of thin film buckling in compound specimens under uniaxial stretching

    Toth, F., Rammerstorfer, F. G., Cordill, M. J. & Fischer, F. D., 2014, Shell Structures: Theory and Applications - Proceedings of the 10th SSTA 2013 Conference. p. 247-250 4 p. (Shell Structures: Theory and Applications - Proceedings of the 10th SSTA 2013 Conference; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Numerical analysis of a multivariant martensitic phase transformation in nanostructured NiTi considering elastic anisotropy

    Petersmann, M., 2014

    Research output: Thesis › Diploma Thesis

  27. Published

    Numerical analysis of the rock cutting and the loading of rock cutting tools

    Mikl-Resch, M. J., 2014

    Research output: Thesis › Doctoral Thesis

  28. Published

    Observation of elastic modulus inhomogeneities in thermosetting epoxies using AFM e Discerning facts and artifacts

    Haba, D., Kaufmann, J., Brunner, A. J., Resch, K. & Teichert, C., 2014, In: Polymer. 55, p. 4032-4040

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    On Energy Optimization of Sucker Rod Pumping System

    Carneiro Bastos, I., 2014, 198 p.

    Research output: Thesis › Doctoral Thesis

  30. Published

    Ordered Mesoporous Thin Films; Elastic Modulus Determination by Humidity Driven Pore Lattice Deformation

    Sharifi Rajabi, P., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    Phase transformations in steels - from in-situ experiments to thermodynamically based models

    Gamsjäger, E., 2014, Proceedings of the 8th European continuous casting conference. p. 116-123

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Photovoltaik-Laderegler und Balancer zum Einsatz von Lithium-Ionen-Hochenergiezellen

    Volgger, S., 2014

    Research output: Thesis › Master's Thesis

  33. Published

    Piezoelectric Response of Cadmium Sulfide Nanorod Crystals Grown from Gas Phase by Using Ag and Au Catalyst

    Kratzer, M., 2014, PROCEEDINGS OF THE INTERNATIONAL CONFERENCE on NANOMATERIALS : APPLICATIONS AND P ROPERTIES. p. 02NEA07-1-02NEA07-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Pilgerwalzwerk: Einblicke in den Walzprozess durch die Anwendung der Finite Elemente Methode

    Ragger, K., Kaiser, R., Paal, J., Fluch, R. & Buchmayr, B., 2014, In: Kalibreur. p. 28-41

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Pore characteristics and mechanical properties of silica templated by wood

    Fritz-Popovski, G., Morak, R., Schöberl, T., Van Opdenbosch, D., Zollfrank, C. & Paris, O., 2014, In: Bioinspired, Biomimetic and Nanobiomaterials. 3, p. 160-168

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Reversible Cross-links in Polymer Chains The influence of sacrificial bonds on the mechanical behavior of polymeric system investigated using Monte Carlo simulations

    Nabavi, S., 2014

    Research output: Thesis › Doctoral Thesis

  37. Published

    Roughness analysis von polymerbeschichteten Edelstahlproben2014

    Genser, J., Kratzer, M., Ganser, C. & Teichert, C., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  38. Published

    Shape of Picoliter Droplets on Chemically Striped Patterned Substrates

    Jansen, H. P., Sotthewes, K., Ganser, C., Zandvliet, H. J. W., Teichert, C. & Kooij, S., 2014, In: Langmuir. 30, p. 11574-11581

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Shape retrieval of inorganic nanocrystals from SAXS-data

    Burian, M., 2014, 77 p.

    Research output: Thesis › Diploma Thesis

  40. Published

    Simulation of stress distribution in assembled silicon dies and deflection of printed circuit boards

    Macurova, K., Angerer, P., Antretter, T., Bermejo Moratinos, R., Maia, W., Schöngrundner, R., Krivec, T., Morianz, M. & Brizoux, M., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Simulation of the roller straightening process with respect to residual stresses and the curvature trend

    Kaiser, R., Hatzenbichler, T., Buchmayr, B. & Antretter, T., 2014, International Conference on Residual Stresses 9 (ICRS 9). p. 456-463

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Studying interaction between mineral particles by atomic force spectroscopy

    Klima, S., Mirkowska, M., Kratzer, M., Flachberger, H., Teichert, C. & Pondicherry, K., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Test Bench for a High Performance PSM Drive System for a Nautical Application

    Schmid, A., Aschenbrenner, F., Kaserer, G. & Prenner, M., 2014, APEIE. p. 775-778

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    The Influence of Chemistry on the Kirkendall Effect during Grain Boundary Interdiffusion

    Svoboda, J., Fischer, F. D., Klinger, L. & Rabkin, E., 2014, In: Philosophical magazine. 94, p. 3398-3412

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Thermodynamic Extremal Principles for Irreversible Processes in Materials Science

    Fischer, F. D., Svoboda, J. & Petryk, H., 2014, In: Acta materialia. 67, p. 1-20

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    The role of topology and thermal backbone fluctuations on sacrificial bond efficacy in mechanical metalloproteins

    Nabavi, S., Harrington, M. J., Paris, O., Fratzl, P. & Hartmann, M., 2014, In: New journal of physics. 16, p. 013003-1-013003-13

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    The structural evolution of multi-layer graphene stacks in carbon fibers under load at high temperature – A synchrotron radiation study

    Rennhofer, H., Puchegger, S., Pabisch, S., Rentenberger, C., Li, C., Siegel, S., Steiger-Thirsfeld, A., Paris, O. & Peterlik, H., 2014, In: Carbon. 80, p. 373-381

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Thin cellulose films as a model system for paper fibre bonds

    Rohm, S., Hirn, U., Ganser, C., Teichert, C. & Schennach, R., 2014, In: Cellulose. 21, p. 237-249

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Transport and Photoelectric Effects in Structures with Ge and SiGe Nanoclusters Grown on Oxidized Si (001)

    Lysenko, V. S., Gomeniuk, Y. V., Kondratenko, S. V., Melnichuk, Y. Y., Kozyrev, Y. N. & Teichert, C., 2014, Advanced Materials Research: 7th International Workshop on Functional Nanomaterials and Devices. Vol. 854. p. 11-19 (Advanced Materials Research; vol. 854).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Two-Dimensional Simulation of Reactive Diffusion in Binary Systems

    Svoboda, J., Stopka, J. & Fischer, F. D., 2014, In: Computational materials science. 95, p. 309-315

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Zwei-Jahresbericht 2012/13

    Meisels, R., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1...12 13 14 15 16 17 18 19 ...42 Next
View graph of relations