Chair of Processing of Composites and Design for Recycling (270)

Organisational unit: Chair

301 - 350 out of 372Page size: 50

Research output

  1. 2014
  2. Published

    Mechanical influence on dry glass fibres during manufacturing

    Maier, A., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  3. Published

    Monitoring the production of FRP composites: A review of in-line sensing methods

    Konstantopoulos, S., Fauster, E. & Schledjewski, R., 2014, In: Express Polymer Letters. 8, p. 823-840

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Optische Messtechnik zur Charakterisierung von textilen Verstärkungsstrukturen

    Fauster, E., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  5. Published

    Prepregs

    Schledjewski, R., 2014, Handbuch Faserverbundkunststoffe/Composites – Grundlagen, Verarbeitung, Anwendungen. p. 492-495

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  6. Published

    Production method evaluation for large cylindrical composite parts under a cost perspective

    Horejsi, K., Schneiderbauer, G., Tauchner, J., Schledjewski, R. & Noisternig, J., 2014, Proceedings of the16th European Conference on Composite Materials. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Prozessbasierte Kennwertermittlung (Permeabilität) mit anschließenden RTM-Versuchen manipulierter Preforms

    Kaufmann, S., 2014, 117 p.

    Research output: Thesis › Master's Thesis

  8. Published

    Pultrusionsverfahren

    Schledjewski, R., Friedrich, K. & Wiedmer, S., 2014, Handbuch Verbundwerkstoffe: Werkstoffe, Verarbeitung, Anwendung. p. 317-323

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  9. Published

    Smart Composite Tubes – Series Production of 3D Curved Hollow CFRP Tubes

    Schillfahrt, C., Schledjewski, R., Troi, V. & Schennach, O., 2014, 35th SAMPE Europe International Technical Conference (SEICO14). p. 94-100 7 p. P 23

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Using Glass Covered Magnetic Micro-Wire Composites in Fiber Reinforced Polymeric Composites for Aeronautical Applications

    Konstantopoulos, S., Christopoulos, A., Schledjewski, R. & Hristoforou, E., 2014, In: Sensor Letters. 12

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Wickel- und Tapelegetechnik

    Schledjewski, R., Schlottermüller, M., Neitzel, M., Beresheim, G., Mack, J. & Brzeski, M., 2014, Handbuch Verbundwerkstoffe: Werkstoffe, Verarbeitung, Anwendung. p. 325-355

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  12. Published

    Wirtschaftlichkeitesbetrachtungen zur Herstellung von Bauteilen aus Hochleistungsverbundwerkstoffen

    Hueber, C., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. 2013
  14. Published

    Accurate 2d permeability measurement: Optical permeability characterization

    Grössing, H., Fauster, E. & Schledjewski, R., 2013, Novel Aspects in Composite Technologies: from Fibre to lightweight Structures. p. 34-40

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    An adaptive modular monitoring & control system for composites manufacturing processes

    Konstantopoulos, S., Fauster, E. & Schledjewski, R., 2013, Processing of fibre composites - challenges for maximum materials performance. p. 261-271

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Cost-based process selection for CFRP aerospace parts

    Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2013, In: JEC Composites Magazine. 81, May-June, p. 60-62

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Cost-based process selection for CFRP aerospace parts

    Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    Cost-saving potentials for CFRP parts in early design stages

    Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2013, Composite Materials: The great advance. p. 8439-8446

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Cost-saving potentials for CFRP parts in early design stages

    Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    CULT – Hybrider Leichtbau mit ganzheitlichem Ansatz am Beispiel “CULT” (Cars’ Ultra Light Technologies)

    Schledjewski, R., 2013, In: Carbon-Composites-Magazin : die Mitgliederzeitschrift des CCeV. 2013, 2, p. 85-85

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Entwicklung eines Serienfertigungskonzepts für GFK-Schlaufen mit den Anforderungen an hohe Stückzahlen in der Bauindustrie

    Dietrich, A. M., 2013

    Research output: Thesis › Master's Thesis

  22. Published

    Entwurf und Konstruktion eines Thermoplast-Tapelegekopfes

    Pazour, P., 2013, 94 p.

    Research output: Thesis › Master's Thesis

  23. Published

    Herausforderungen und Lösungsansätze für die Entwicklung einer RTM-Prozessroutine

    Pühringer, F., 2013, 134 p.

    Research output: Thesis › Master's Thesis

  24. Published

    High efficient composite processing

    Schledjewski, R., 2013, ICSAAM 2013. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    In-line cure monitoring of composite materials based on kinetic model analysis assisted by thermal sensing

    Konstantopoulos, S., Tonejc, M., Fauster, E. & Schledjewski, R., 2013, Proceedings of the 5th ICSAAM. p. -

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Konzept zur Automatisierung eines Thermoplast-Tapelegekopfes

    Tonejc, M., 2013

    Research output: Thesis › Master's Thesis

  27. Published

    Mechanical Dispersion Methods for Carbon Nanotubes in Aerospace Composite Matrix Systems

    Grishchuk, S. & Schledjewski, R., 2013, Carbon Nanotube Enhanced Aerospace Composite Materials. p. 99-154

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  28. Published

    Moulds for continuous fiber reinforced polymer Composites

    Schledjewski, R., 2013, Mould-Making Handbook. p. 200-239

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  29. Published

    Multifunktionale Oberflächen und Grenzflächen in Verbundwerkstoffen: Online Erfassung von Kompaktierung, Imprägnierung und Aushärtegrad

    Kastanis, D. & Schledjewski, R., 2013, 22. Leobener Kunststoff-Kolloquium „Oberflächen und Grenzflächen in der Polymertechnologie“. p. 168-174

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Optical permeability measurement of NCF: Influence of material properties on the 2d preform permeability

    Grössing, H. & Schledjewski, R., 2013, Composite Materials: The great advance. p. 5802-5809

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Parametric study on processing parameters and resulting part quality through thermoplastic placement process

    Khan, M. A., Mitschang, P. & Schledjewski, R., 2013, In: Journal of composite materials. 47, p. 485-499

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Pulver In-Mould Coating von CFK-Bauteilen für die Anwendung als Automobile Außenteile

    Hueber, C., 2013

    Research output: Thesis › Master's Thesis

  33. Published

    Report on suitable production processes of composite crash system

    Kastanis, D., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Report on suitable production processes of composite underbody structure

    Kastanis, D., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    Statistical Uncertainty Analysis of Material and Measurement Parameters for Optical Permeability Determination

    Fauster, E., Grössing, H. & Schledjewski, R., 2013, Proceedings of CompositesWeek@Leuven. p. --8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Statistical Uncertainty Analysis of Material and Measurement Parameters for Optical Permeability Determination

    Fauster, E., Grössing, H. & Schledjewski, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Thermal degradation analysis of short-time heated polymers

    Bayerl, T., Brzeski, M., Martínez-Tafalla, M., Schledjewski, R. & Mitschang, P., 2013, In: Journal of thermoplastic composite materials. p. 1-26

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Uncertainty analysis for optical permeability measurement of reinforcing textiles

    Fauster, E., Grössing, H. & Schledjewski, R., 2013, Composite Materials: The great advance. p. 4685-4694

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. 2012
  40. Published

    Influence of fiber placement and architecture on fracture mechanical properties of carbon fiber reinforced composites

    Stelzer, S., Schillfahrt, C., Wolfahrt, M., Pinter, G., Noisternig, J. & Frieß, S., 24 May 2012.

    Research output: Contribution to conference › Presentation › Research

  41. Published

    A Model-Based Processing Concept for Thermoplastic Tape Placement

    Fauster, E. & Schledjewski, R., 2012, SAMPE 2012 Technical Conference Proceedings: Connecting the Advanced Materials Community. p. --8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    A Modular Model-Based Processing Concept for an Optimized Pultrusion Process Management

    Fauster, E., Kastanis, D. & Schledjewski, R., 2012, Proceedings of ECCM 15. p. --8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Bestimmung der Permeabilität von flächigen Faserhalbzeugen

    Grössing, H., 2012, 79 p.

    Research output: Thesis › Master's Thesis

  44. Published

    CFD Simulations of a hot gas torch for the thermoplastic tape placement process

    Narnhofer, M., Pazour, P. & Schledjewski, R., 2012, Proceedings of ECCM 15. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    COMPARISON OF PERMEABILITY MEASUREMENTS OF SEVERAL FIBRE TEXTILES USING DIFFERENT MEASUREMENT METHODS

    Grössing, H., Wolfahrt, M., Müller, A. & Schledjewski, R., 2012, Proceedings of ECCM 15. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Determination of the orthotropic material properties of individual layers of printed circuit boards

    Fuchs, P. F., Pinter, G. & Tonejc, M., 2012, In: Microelectronics Reliability. 52, 11, p. 2723-2730

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Filament winding process in thermoplastics

    Schledjewski, R., 2012, Manufacturing techniques for polymer matrix composite (PMCs). p. 182-208

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  48. Published

    Induction heating of thermoplastic materials by particulate heating promoters

    Bayerl, T., Schledjewski, R. & Mitschang, P., 2012, In: Polymers & Polymer Composites (Polymers and polymer composites). 20, p. 333-342

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Modell-basierte Verarbeitung von Faser-Kunststoff-Verbunden

    Fauster, E., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Montanuniversität Leoben: Kolloquium Polymerer Leichtbau

    Schledjewski, R., 2012, In: Österreichische Kunststoff-Zeitschrift. p. 50-51

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Montanuniversität Leoben: Leichtbau mit polymeren Verbundwerkstoffen in der Umsetzung

    Schledjewski, R., 2012, In: News / Carbon Composites e.V.. 11, p. 25-25

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    PROCESS SELECTION OPTIMIZATION OF CFRP PARTS IN THE AEROSPACE INDUSTRY

    Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2012, Proceedings of ECCM 15. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Simulation des Tapelegeprozesses mit thermoplastischen Matrixmaterialien

    Narnhofer, M., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1...3 4 5 6 7 8 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 2701