Chair of Processing of Composites and Design for Recycling (270)

Organisational unit: Chair

1 - 50 out of 372Page size: 50

Research output

  1. 2025
  2. Published

    The Fossil, the Green, and the In-Between: Life Cycle Assessment of Manufacturing Composites with Varying Bio-Based Content

    Kirschnick, U., Ravindran, B., Sieberer, M., Fauster, E. & Feuchter, M., 20 Feb 2025, In: Journal of composites science. 9.2025, 3, 18 p., 93.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2024
  4. Published

    A new ISO standard for the experimental characterization of in-plane permeability of fibrous reinforcements

    May, D., Advani, S. G., Duhovic, M., Endruweit, A., Fauster, E., George, A., Liotier, P. J., Lira, C., Lomov, S. V., Pucci, M. F., Schmeer, S., Abliz, D., Berg, D. C., Binetruy, C., Bodaghi, M., Comas-Cardona, S., Etchells, M., Govignon, Q., Koorevaar, A. & Michaud, V. & 9 others, Park, C. H., Schubnel, R., Sousa, P., Ravel, R., Rouhi, M., Syerko, E., Umer, R., Vollmer, M. & Yong, A., 20 Nov 2024, In: Composites Part A: Applied Science and Manufacturing. 190.2025, March, 13 p., 108592.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Challenges and Opportunities in Carbon Fiber-Reinforced Polymer Composites Circularity: A Prospective LCA Case Study

    Miao, Z. C., Kirschnick, U., Chen, H. & Carbajales-Dale, M., 23 Oct 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  6. Published

    Characterisation of the Mechanical Properties of Natural Fibre Polypropylene Composites Manufactured with Automated Tape Placement

    Legenstein, A., Haiden, L., Feuchter, M. & Fauster, E., 1 Oct 2024, In: Journal of composites science. 8.2024, 10, 21 p., 396.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Spritzgießcompoundieren im Recycling von Post-Consumer PP Abfällen

    Zidar, D., Krempl, N., Shahroodi, Z., Kirschnick, U. & Holzer, C., 1 Sept 2024, In: Jahresmagazin Kunststofftechnik : Ingenieurwissenschaften ... : im Fokus . 2024, 01, p. 38-42 5 p.

    Research output: Contribution to journal › Article › Research

  8. Published

    Reprocessable carbon fiber vitrimer composites: Reclamation and reformatting of carbon fibers for second generation composite materials

    Sharma, H., Bender, M., Kim, G., Lee, D., Caglayan, C., Schlögl, S., Yun, G. J., Kumar, A. & Rana, S., 24 Aug 2024, In: Journal of Applied Polymer Science. 141.2024, 41, 15 p., e56074.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Waste-to-Value Feasibility Study: Assessing the Viability and Quality of Incorporating Different Postindustrial Glass-Fiber Composites into Postconsumer Recycled Polypropylene

    Shahroodi, Z., Krempl, N., Zidar, D., Mayrhofer, T., Kirschnick, U., Arbeiter, F., Duretek, I. & Holzer, C., 7 Aug 2024, In: ACS Sustainable Chemistry and Engineering. 12.2024, 33, p. 12619-12631 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Fatigue and residual strain monitoring for thermoplastic composite using embedded FBG inscribed in highly-birefringent side-hole elliptical core optical fiber

    Wachtarczyk, K., Yadav, N., Błachut, A., Gąsior, P., Schledjewski, R. & Kaleta, J., 27 Jul 2024, In: Measurement. 238.2024, October, 14 p., 115404.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Manufacturing bio-based fiber-reinforced polymer composites: Process performance in RTM and VARI processes

    Kirschnick, U., Feuchter, M., Ravindran, B., Salzmann, M., Duretek, I., Fauster, E. & Schledjewski, R., 19 Jul 2024, In: Advanced Manufacturing: Polymer and Composites Science. 10.2024, 1, 12 p., 2379205.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    INFLUENCE OF FLUID PROPERTIES ON TRANSVERSE FABRIC COMPRESSIBILITY DURING IN-SITU IMPREGNATION

    Bender, M. & Fauster, E., 5 Jul 2024, Proceedings of the 21st European Conference on Composite Materials: Volume 3 - Material and Structural Behavior – Simulation & Testing. 1 ed. Nantes, Vol. 3. p. 1140 - 1147 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Near-infrared spectroscopy in resin transfer molding—determination of the degree of cure

    Salzmann, M., Märzinger, W., Teuchtmann, M., Ravindran, B., Kirschnick, U. & Fauster, E., Jun 2024, In: International Journal of Advanced Manufacturing Technology. 132.2024, 11-12, p. 5557-5565 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Compaction behaviour of textile reinforcements

    Bender, M., 23 May 2024.

    Research output: Contribution to conference › Poster › Transfer

  15. Published

    Effect of Flashlamp Heating System Parameters on the Wedge Peel Strength of Thermoplastic Carbon Fiber Tape in the Automated Tape Placement Process

    Legenstein, A. & Fauster, E., 29 Apr 2024, In: Journal of Manufacturing and Materials Processing. 8.2024, 3, 17 p., 91.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Impact Characteristics and Repair Approaches of Distinct Bio-Based Matrix Composites: A Comparative Analysis

    Ravindran, B., Agathocleous, T., Oswald-Tranta, B., Fauster, E. & Feuchter, M., 29 Mar 2024, In: Journal of composites science. 8.2024, 4, 20 p., 126.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Effect of different weft-knitted structures on the mechanical performance of bio-based flexible composites

    Schwaiger, M., Bender, M., Schirmer, H., Taesler, J., Feuchter, M. & Resch-Fauster, K., Mar 2024, In: Composites Part C: Open Access. 13.2024, March, 11 p., 100436.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Tensile properties of flexible composites with knitted reinforcements from various yarn materials

    Schwaiger, M., Röper, F., Wolfahrt, M., Taesler, J., Schirmer, H., Salzmann, M., Feuchter, M. & Resch-Fauster, K., 20 Feb 2024, In: Polymer Composites. 45.2024, 3, p. 2602-2614 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Circular Economy Potential of Sustainable Bio-Based Composites: Repair, Recycle and Reuse

    Ravindran, B. & Fauster, E., 2024.

    Research output: Contribution to conference › Poster › Research

  20. Published

    Environmental impact assessment of a car door panel using recycled carbon fibers: Relevance of different life stages and influence of modelling choices

    Kirschnick, U., Duchamp, B. & Fick, G., 2024, p. 56. 62 p.

    Research output: Contribution to conference › Paper › peer-review

  21. Published

    Ermittlung der Gelzeit mittels Nahinfrarotspektroskopie in der lösungsmittelfreien Prepreg Herstellung

    Schmid, S., 2024

    Research output: Thesis › Master's Thesis

  22. Published

    Influence of Carbon Material Properties on Slag-Foaming Dynamics in Electric Arc Furnaces: A Review

    Kieush, L. & Schenk, J., 2024, In: Steel research international. ??? Stand: 11. Februar 2025, ??? Stand: 11. Februar 2025

    Research output: Contribution to journal › Review article › peer-review

  23. Published

    INLINE PROCESS MONITORING AND FAILURE MANAGEMENT CONCEPT FOR ATL

    Yadav, N., Schledjewski, R. & Fauster, E., 2024, Proceedings of the 21st European Conference on Composite Materials: Volume 5 - Manufacturing. p. 497-502 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Inline Process Monitoring Using Near-Infrared Spectroscopy in Liquid Composite Molding Processes: Measurement and Analysis of Critical Parameters in Epoxy/Amine Resin Systems

    Salzmann, M. L., 2024

    Research output: Thesis › Doctoral Thesis

  25. Published

    On the Potential of Epoxy Binder Rovings in Automated Dry Fiber Filament Winding

    Neunkirchen, S., 2024

    Research output: Thesis › Doctoral Thesis

  26. 2023
  27. Published

    Effect of Binder Activation on in-Plane Capillary Flow in Multilayer Stacks of Carbon Fiber Fabrics

    Neunkirchen, S., Bender, M. & Schledjewski, R., 21 Dec 2023, In: Applied composite materials. 31.2024, April, p. 709-719 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. E-pub ahead of print

    Experimental validation of a new adaptable LCM mold filling software

    Obertscheider, C., Fauster, E. & Stieber, S., 12 Dec 2023, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 9.2023, 1, 19 p., 2282310.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Novel test-rig for compaction behaviour analysis of textile reinforcements for improved RTM-process replication

    Bender, M. & Fauster, E., 1 Nov 2023, In: Advanced Manufacturing: Polymer and Composites Science. 9.2023, 1, 5 p., 2263828.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Determination of the glass transition temperature of an epoxy prepreg by Near Infrared Spectroscopy

    Salzmann, M., Teuchtmann, M. & Schledjewski, R., Aug 2023, In: Polymer Testing. 125.2023, August, 8 p., 108111.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Parametric effect on inline width control for thermoplastic automated tape layup

    Yadav, N. & Schledjewski, R., Aug 2023.

    Research output: Contribution to conference › Paper

  32. Published

    Inferring material properties from FRP processes via sim-to-real learning

    Stieber, S., Schröter, N., Fauster, E., Bender, M., Schiendorfer, A. & Reif, W., 27 Jul 2023, In: International Journal of Advanced Manufacturing Technology. 128.2023, September, p. 1517–1533 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. E-pub ahead of print

    Review of in-process defect monitoring for automated tape laying

    Yadav, N. & Schledjewski, R., 20 Jul 2023, (E-pub ahead of print) In: Composites Part A: Applied Science and Manufacturing. 173.2023, Oktober, 16 p., 107654.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Resin avatar for Industry 4.0

    Lira, C., Etchells, M., Wolfahrt, M., Fauster, E., Daforno, R. & Koorevaar, A., May 2023.

    Research output: Contribution to conference › Abstract › peer-review

  35. Published

    Resin avatar for Industry 4.0

    Lira, C., Etchells, M., Wolfahrt, M., Fauster, E., Daforno, R. & Koorevaar, A., May 2023.

    Research output: Contribution to conference › Presentation › Research

  36. Published

    RTMsim - A Julia module for filling simulations in Resin Transfer Moulding with the Finite Area Method

    Obertscheider, C. & Fauster, E., 15 Apr 2023, In: The journal of open source software. 8.2023, 8 p., 4763.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Stretch-Steering of Aligned Discontinuous Fiber Tapes on Highly Curved Paths using Automated Fiber Placement

    Legenstein, A., Füssel, L., Tierney, J., Gillespie Jr., J. W., Heider, D. & Cender, T., Apr 2023, p. 992-1005. 13 p.

    Research output: Contribution to conference › Paper › peer-review

  38. E-pub ahead of print

    In-line and off-line NDT defect monitoring for thermoplastic automated tape layup

    Yadav, N., Oswald-Tranta, B., Gürocak, M., Galic, A., Adam, R. & Schledjewski, R., 31 Mar 2023, (E-pub ahead of print) In: NDT and E international. 137.2023, July, 8 p., 102839.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Investigation of the Mechanical Properties of Sandwich Composite Panels Made with Recyclates and Flax Fiber/Bio-Based Epoxy Processed by Liquid Composite Molding

    Ravindran, B., Feuchter, M. & Schledjewski, R., 15 Mar 2023, In: Journal of composites science. 7.2023, 3, 16 p., 122.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Thermally Latent Bases in Dynamic Covalent Polymer Networks and their Emerging Applications

    Reisinger, D., Kriehuber, M. U., Bender, M., Bautista-Anguís, D., Rieger, B. & Schlögl, S., 14 Mar 2023, In: Advanced materials. 35.2023, 24, 27 p., 2300830.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Bio-based soft composites with knitted reinforcements

    Schwaiger, M., Bender, M., Schirmer, H., Taesler, J., Kosse, S., Feuchter, M. & Resch-Fauster, K., 2023.

    Research output: Contribution to conference › Poster › Research

  42. Published

    Bio-based soft composites with knitted reinforcements

    Schwaiger, M., Bender, M., Schirmer, H., Taesler, J., Kosse, S., Feuchter, M. & Resch-Fauster, K., 2023, 31st Leoben Conference on Polymer Engineering & Science. Leoben

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Circularity and sustainability of biobased polymer/natural fiber reinforced composite

    Ravindran, B. & Schledjewski, R., 2023, Global Challenges for a Sustainable Society .

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  44. Published

    Environmental assessment comparison of natural fiber reinforced polymer composites processing

    Kirschnick, U., 2023.

    Research output: Contribution to conference › Presentation › Research › peer-review

  45. Published

    Environmental assessment of natural fiber reinforced polymer composites processing

    Kirschnick, U. & Schledjewski, R., 2023, 31st Leoben Conference on Polymer Engineering & Science.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Environmental performance comparison of a one-step and two-step compounding and injection molding process using recycled PP and GF

    Kirschnick, U., 2023.

    Research output: Contribution to conference › Presentation › Research › peer-review

  47. Published

    Environmental performance comparison of a one-step and two-step compounding and injection molding process using recycled PP and glass fibers

    Kirschnick, U., Shahroodi, Z., Krempl, N. & Schledjewski, R., 2023, Polymer Meeting 15: Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Evaluation of repairing techniques for damaged natural fiber reinforced composites

    Cardenas Velasco, J., 2023

    Research output: Thesis › Master's Thesis

  49. Published

    Influence of the Textile Architecture on its Transversal Compaction Behaviour

    Hollitsch, M., 2023

    Research output: Thesis › Master's Thesis

  50. Published

    Inline monitoring and control for Automated Tape Laying

    Yadav, N., 2023

    Research output: Thesis › Doctoral Thesis

  51. Published

    Investigation of the influence of speed increase in pultrusion by means of design of experiment on the barrier properties of glass fiber reinforced polyester profiles.

    Ekam, M., 2023

    Research output: Thesis › Master's Thesis

  52. Published

    LCA of a recycled GFRP composite: Comparing attributional and consequential modelling approaches

    Kirschnick, U., 2023.

    Research output: Contribution to conference › Presentation › Research › peer-review

  53. Published

    Screening Life Cycle Assessment comparing One-step and Two-step Injection Molding Compounding using Conservative and Optimistic Scenarios

    Kirschnick, U., Shahroodi, Z., Krempl, N. & Schledjewski, R., 2023, In: WSEAS transactions on environment and development. 19.2023, 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 2701