The effect of carbon fiber content on physico-mechanical properties of recycled poly(ethylene terephthalate) composites additively manufactured with fused filament fabrication

Katalagarianakis, A., Van de Voorde, B., Pien, N., Polyzos, E., Duretek, I., Holzer, C., Cardon, L., Bernaerts, K. V., Van Hemelrijck, D., Van Vlierberghe, S. & Pyl, L., Dec 2022, In: Additive Manufacturing. 60.2022, Part A, December, 14 p., 103246.

Research output: Contribution to journal › Article › Research › peer-review

Process Optimization of Injection Overmolding Structural Electronics with Regard to Film Distortion

Hubmann, M., Madadnia, B., Groten, J., Pletz, M., Vanfleteren, J., Stadlober, B., Bossuyt, F., Kaur, J. & Lucyshyn, T., 22 Nov 2022, In: Polymers. 14.2022, 23, 20 p., 5060.

Research output: Contribution to journal › Article › Research › peer-review

Dynamic Behavior of Thermally Affected Injection-Molded High-Density Polyethylene Parts Modified by Accelerated Electrons

Mizera, A., Krstulovic-Opara, L., Krempl, N., Karhankova , M., Manas, M., Sanek , L., Stoklasek, P. & Grebo, A., 16 Nov 2022, In: Polymers 2022 / Advances in the Mechanical Behavior of Polymeric Materials). 14:2022, 22, 15 p., 4970.

Research output: Contribution to journal › Article › Research › peer-review

Influence of Binder Composition and Material Extrusion (MEX) Parameters on the 3D Printing of Highly Filled Copper Feedstocks

Sadaf, M., Cano Cano, S., Gonzalez-Gutierrez, J., Bragaglia, M., Schuschnigg, S., Kukla, C., Holzer, C., Vály , L., Kitzmantel, M. & Nanni, F., 16 Nov 2022, In: Polymers / Molecular Diversity Preservation International. 14.2022, 22, 23 p., 4962.

Research output: Contribution to journal › Article › Research › peer-review

In-situ alignment of 3D printed anisotropic hard magnets

Suppan, M., Huber, C., Mathauer, K., Abert, C., Bruckner, F., Gonzalez-Gutierrez, J., Schuschnigg, S., Groenefeld, M., Teliban, I., Kobe, S., Saje, B. & Suess, D., 20 Oct 2022, In: Scientific reports (London : Nature Publishing Group). 12.2022, October, 6 p., 17590.

Research output: Contribution to journal › Article › Research › peer-review

Influence of Viscose Fibre Geometry on the Structure–Property Relationships of High-Density Polyethylene Composites

Slapnik, J., Kraft, G., Wilhelm, T., Hribernik, M., Švab, I., Lucyshyn, T. & Pinter, G. G., 18 Oct 2022, In: Polymers. 14.2022, 20, 15 p., 4389.

Research output: Contribution to journal › Article › Research › peer-review

Peroxide-Based Crosslinking of Solid Silicone Rubber, Part I: Insights into the Influence of Dicumylperoxide Concentration on the Curing Kinetics and Thermodynamics Determined by a Rheological Approach

Azevedo, M., Monks, A. M., Kerschbaumer, R. C., Schlögl, S. & Holzer, C., 18 Oct 2022, In: Polymers. 14.2022, 20, 22 p., 4404.

Research output: Contribution to journal › Article › Research › peer-review

A Study on Over-Molded Copper-Based Flexible Electronic Circuits

Bakr, M., Hubmann, M., Bossuyt, F. & Vanfleteren, J., 16 Oct 2022, In: Micromachines. 13.2022, 10, 27 p.

Research output: Contribution to journal › Article › Research › peer-review

Hardness Loss of Plastic Mold Steels: Phenomenon in Injection Molding

Zidar, D., Landefeld, A., Gschöpf, B., Schnitzer, R., Zunko, H. & Friesenbichler, W., 28 Sept 2022, In: Steel research international. 94.2022, 4, 7 p., 2200326.

Research output: Contribution to journal › Article › Research › peer-review

Anti-Adhesive Organosilane Coating Comprising Visibility on Demand

Kern, W., Müller, M., Bandl, C., Krempl, N. & Kratzer, M., 24 Sept 2022, In: Polymers. 14.2022, 19, 20 p., 4006.

Research output: Contribution to journal › Article › Research › peer-review

Low-Temperature Fibre Direct Compounding of Cellulose Fibres into PA6

Slapnik, J., Liu, Y., Kupfer, R., Lucyshyn, T., Nardin, B. & Pinter, G., 23 Sept 2022, In: Materials. 15.2022, 19, 14 p., 6600.

Research output: Contribution to journal › Article › Research › peer-review

Effect of Increased Powder-Binder Adhesion by Backbone Grafting on the Properties of Feedstocks for Ceramic Injection Molding

Ghasemi-Mobarakeh, L., Cano, S., Momeni, V., Liu, D., Duretek, I., Riess, G., Kukla, C. & Holzer, C., 2 Sept 2022, In: Polymers. 14.2022, 17, 15 p., 3653.

Research output: Contribution to journal › Article › Research › peer-review

Freeformer im OP: Projekt CAMed: Implementierung additiver Fertigung im klinischen Bereich.

Hentschel, L., 1 Aug 2022, In: today. Das ARBURG Magazin. 2022, 80, p. 16-17 2 p.

Research output: Contribution to journal › Article › Research

Novel Additive Manufacturing Materials for Waste Heat Deduction

Schuschnigg, S., Hufnagl, M., Holzer, C., Eder, F., Kroke, E., Schallmeiner, S., Regula, C., Hamedi, Y., Grosche, C., Morganti, E. & Seidler, K., 29 Jul 2022, In: Advanced engineering materials. 2022, 10 p., 22006714.

Research output: Contribution to journal › Article › Research › peer-review

Parameter Optimization of the ARBURG Plastic Freeforming Process by Means of a Design of Experiments Approach

Hentschel, L., Petersmann, S., Gonzalez-Gutierrez, J., Kynast, F., Schäfer, U., Arbeiter, F. & Holzer, C., 31 May 2022, In: Advanced engineering materials. 24.2022, 11 p., 2200279.

Research output: Contribution to journal › Article › Research › peer-review

The Effects of Washing and Formaldehyde Sterilization on the Mechanical Performance of Poly(methyl Methacrylate) (PMMA) Parts Produced by Material Extrusion-Based Additive Manufacturing or Material Jetting

Petersmann, S., Hentschel, L., Gonzalez-Gutierrez, J., Tödtling, M., Schäfer, U., Arbeiter, F. & Üçal, M., 13 May 2022, In: Advanced engineering materials. 24.2022, 2200225.

Research output: Contribution to journal › Article › Research › peer-review

Toward a new generation of vaginal pessaries via 3D-printing: Concomitant mechanical support and drug delivery

Eder, S., Wiltschko, L., Koutsamanis, I., Afonso Urich, J. A., Arbeiter, F., Roblegg, E. & Spoerk, M., May 2022, In: European Journal of Pharmaceutics and Biopharmaceutics. 174.2022, May, p. 77-89 13 p.

Research output: Contribution to journal › Article › Research › peer-review

Ein zweites Leben für Haushaltsverpackungen: Ein Kooperationsprojekt des Kunststoff-Clusters aus der Sicht der Beteiligten

Krempl, N., Lielacher, R., Nadherny-Borutin, S., Aschermayer, F., Baumann, A., Schuch, D. & Schlenz, E., Apr 2022, In: Chemiereport.at : Austrian life sciences ; Österreichs Magazin für Chemie, Life Sciences & Materialwissenschaften. 2022, 4, p. 33-35 3 p.

Research output: Contribution to journal › Article › Research

Injection Molding Simulation of Polyoxymethylene Using Crystallization Kinetics Data and Comparison with the Experimental Process

Schrank, T., Berer, M., Haar, B., Ramoa, B., Lucyshyn, T., Feuchter, M., Pinter, G., Speranza, V. & Pantani, R., 23 Mar 2022, In: Polymer crystallization. 2022, 15 p.

Research output: Contribution to journal › Article › Research › peer-review

Effect of extrusion and fused filament fabrication processing parameters of recycled poly(ethylene terephthalate) on the crystallinity and mechanical properties

Van de Voorde, B., Katalagarianakis, A., Huysman, S., Toncheva, A., Raquez, J. M., Duretek, I., Holzer, C., Cardon, L., Bernaerts, K. V., Van Hemelrijck, D., Pyl, L. & Van Vlierberghe, S., Feb 2022, In: Additive Manufacturing. 50.2022, February, 14 p., 102518.

Research output: Contribution to journal › Article › Research › peer-review

Investigating thermomechanical recycling of poly(ethylene terephthalate) containing phosphorus flame retardants

Bascucci, C., Duretek, I., Lehner, S., Holzer, C., Gaan, S., Hufenus, R. & Gooneie, A., Jan 2022, In: Polymer Degradation and Stability. 195.2022, January, 11 p., 109783.

Research output: Contribution to journal › Article › Research › peer-review

Relationships between the Decomposition Behaviour of Renewable Fibres and Their Reinforcing Effect in Composites Processed at High Temperatures

Slapnik, J., Lucyshyn, T. & Pinter, G., 18 Dec 2021, In: Polymers. 13.2021, 24, 16 p., 4448.

Research output: Contribution to journal › Article › Research › peer-review

Material extrusion additively manufactured alumina monolithic structures to improve the efficiency of plasma-catalytic oxidation of toluene

Li, T., Gonzalez-Gutierrez, J., Raguz, I., Holzer, C., Li, M., Cheng, P., Kitzmantel, M., Shi, L. & Huang, L., 10 Nov 2021, (E-pub ahead of print) In: Additive Manufacturing. 37.2021, January, 9 p., 101700.

Research output: Contribution to journal › Article › Research › peer-review

Effect of metal particle size and powder volume fraction on the filling performance of powder injection moulded parts with a microtextured surface

Ammosova, L., Cano Cano, S., Schuschnigg, S., Kukla, C., Mönkkönen, K., Suvanto, M. & Gonzalez-Gutierrez, J., Nov 2021, In: Precision Engineering. 72.2021, November, p. 604-612 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Personalised urethra pessaries prepared by material extrusion-based additive manufacturing

Spoerk, M., Arbeiter, F., Koutsamanis, I., Cajner, H., Katschnig, M. & Eder, S., 25 Oct 2021, In: International Journal of Pharmaceutics. 608.2021, 25 October, 13 p., 121112.

Research output: Contribution to journal › Article › Research › peer-review

Influence of the Mold Material on the Injection Molding Cycle Time and Warpage Depending on the Polymer Processed

Lucyshyn, T., Enffans D’Avernas, L. V. D. & Holzer, C., 21 Sept 2021, In: Polymers. 13.2021, 18, 16 p., 3196.

Research output: Contribution to journal › Article › Research › peer-review

Fused Filament Fabrication-Based Additive Manufacturing of Commercially Pure Titanium

Thompson, Y., Polzer, M., Gonzalez-Gutierrez, J., Kasian, O., Heckl, J. P., Dalbauer, V., Kukla, C. & Felfer, P., 12 Sept 2021, In: Advanced Engineering Materials. 23.2021, 12, 12 p., 2100380.

Research output: Contribution to journal › Article › Research › peer-review

The Relationship between a Defined Microstructure within the Mold Surface and the Corresponding Roughness on the Part: A Systematic Study on Particle Size, Filler-, and Compatibilizer Content

Kerschbaumer, R. C., Bolka, S., Pesl, T., Duretek, I. & Lucyshyn, T., 17 Aug 2021, In: Polymers. 13.2021, 16, 23 p., 2757.

Research output: Contribution to journal › Article › Research › peer-review

Bending Properties of Lightweight Copper Specimens with Different Infill Patterns Produced by Material Extrusion Additive Manufacturing, Solvent Debinding and Sintering

Gonzalez-Gutierrez, J., Cano Cano, S., Ecker, J. V., Kitzmantel, M., Arbeiter, F., Kukla, C. & Holzer, C., 6 Aug 2021, In: Applied Sciences : open access journal. 11, 16, 7262.

Research output: Contribution to journal › Article › Research › peer-review

Resins for Frontal Photopolymerization: Combining depth-cure and tunable mechanical properties

Ebner, C., Mitterer, J., Gonzalez-Gutierrez, J., Rieß, G. & Kern, W., 5 Feb 2021, In: Materials. 14.2021, 4, 10 p., 743.

Research output: Contribution to journal › Article › Research › peer-review

Processability of Different Polymer Fractions Recovered from Mixed Wastes and Determination of Material Properties for Recycling

Möllnitz, S., Feuchter, M., Duretek, I., Schmidt, G., Pomberger, R. & Sarc, R., 31 Jan 2021, In: Polymers. 13.2021, 3, p. 1-43 43 p., 457.

Research output: Contribution to journal › Article › Research › peer-review

Temperature Profile in Rubber Injection Molding: Application of a Recently Developed Testing Method to Improve the Process Simulation and Calculation of Curing Kinetics

Traintinger, M., Roman Christopher, K., Lechner, B., Friesenbichler, W. & Lucyshyn, T., 26 Jan 2021, In: Polymers. 13.2021, 3, p. 1-12 12 p., 380.

Research output: Contribution to journal › Article › Research › peer-review

Powder content in powder extrusion moulding of tool steel: Dimensional stability, shrinkage and hardness

Gonzalez-Gutierrez, J., Thompson, Y., Handl, D., Cano Cano, S., Schuschnigg, S., Felfer, P., Kukla, C., Holzer, C. & Burkhardt, C., 15 Jan 2021, In: Materials letters. 283, January 2021, 5 p., 128909.

Research output: Contribution to journal › Article › Research › peer-review

Suitability of Recycled PLA Filament Application in Fused Filament Fabrication Process

Breški, T., Hentschel, L., Godec, D. & Duretek, I., 2021, In: Technical journal : scientific professional journal of University North . 15.2021, 4, p. 491-497 7 p.

Research output: Contribution to journal › Article › Research › peer-review

Damage tolerance-based methodology for fatigue lifetime estimation of a structural component produced by material extrusion-based additive manufacturing

Arbeiter, F., Trávníček, L., Petersmann, S., Dlhý, P., Spoerk, M., Pinter, G. & Hutař, P., Dec 2020, In: Additive Manufacturing. 36, 101730.

Research output: Contribution to journal › Article › Research › peer-review

Processing Conditions of a Medical Grade Poly(Methyl Methacrylate) with the Arburg Plastic Freeforming Additive Manufacturing Process

Hentschel, L., Kynast, F., Petersmann, S., Holzer, C. & Gonzalez-Gutierrez, J., 2 Nov 2020, In: Polymers. 12, 11, p. 1-15 15 p., 2677.

Research output: Contribution to journal › Article › Research › peer-review

Rheological Behaviour of Highly Filled Materials for Injection Moulding and Additive Manufacturing: Effect of Particle Material and Loading

Bek, M., Gonzalez-Gutierrez, J., Kukla, C., Pušnik Crešnar, K., Maroh, B. & Slemenik Perše, L., 2 Nov 2020, In: Applied Sciences : open access journal. 10, 22, p. 1-23 23 p., 7993.

Research output: Contribution to journal › Article › Research › peer-review

Using Compliant Interlayers as Crack Arresters in 3-D-Printed Polymeric Structures

Arbeiter, F., Petersmann, S., Wiener, J., Oesterreicher, F., Spörk, M. & Pinter, G. G., 1 Nov 2020, In: Materials Performance and Characterization. 9, 5, 13 p.

Research output: Contribution to journal › Article › Research › peer-review

Eingliederung von Additiven Fertigungstechnologien in einen klinischen Prozess zur Herstellung von medizinischen Implantaten

Hentschel, L., Gonzalez-Gutierrez, J. & Holzer, C., 1 Oct 2020, In: Jahresmagazin Kunststofftechnik : Ingenieurwissenschaften ... : im Fokus . 2020, p. 56-61

Research output: Contribution to journal › Article › Research

Biofunctional Glycol-Modified Polyethylene Terephthalate and Thermoplastic Polyurethane Implants by Extrusion-Based Additive Manufacturing for Medical 3D Maxillofacial Defect Reconstruction

Katschnig, M., Wallner, J., Janics, T., Burgstaller, C., Zemann, W. & Holzer, C., 5 Aug 2020, In: Polymers. 12.2020, 8, 1751.

Research output: Contribution to journal › Article › Research › peer-review

Additive Fertigung metallischer und keramischer Bauteile: Einsatz der Materialextrusion insbesondere der Verwendung von Filamenten für Sinterverfahren

Kukla, C., Schuschnigg, S. & Holzer, C., Aug 2020, In: Industrie 4.0 Management. 36.2020, 4, p. 20-24 5 p.

Research output: Contribution to journal › Article › Research

Influence of the Infill Orientation on the Properties of Zirconia Parts Produced by Fused Filament Fabrication

Cano Cano, S., Lube, T., Huber, P., Gallego, A., Naranjo, J. A., Berges, C., Schuschnigg, S., Herranz, G., Kukla, C., Holzer, C. & Gonzalez-Gutierrez, J., 15 Jul 2020, In: Materials. 13.2020, 14, 19 p., 3158.

Research output: Contribution to journal › Article › Research › peer-review

An Overview of Material Extrusion Troubleshooting

Loh, G. H., Pei, E., Gonzalez-Gutierrez, J. & Monzon, M., 11 Jul 2020, In: Applied Sciences : open access journal. 10, 14, 28 p., 4776.

Research output: Contribution to journal › Review article › peer-review

Research and Implementation of Axial 3D Printing Method for PLA Pipes

Zhang, H., Zhong, W., Hu, Q., Aburaia, M., Gonzalez-Gutierrez, J. & Lammer, H., 7 Jul 2020, In: Applied Sciences : open access journal. 10.2020, 13, 19 p., 4680.

Research output: Contribution to journal › Article › Research › peer-review

Additive Manufacturing of Steel and Copper Using Fused Layer Modelling: Material and Process Development

Ecker, J. V., Dobrezberger, K., Gonzalez-Gutierrez, J., Spoerk, M., Gierl-Mayer, C. & Danninger, H., 15 Jun 2020, (E-pub ahead of print) In: Powder metallurgy progress. 19.2019, 2, p. 63-81 19 p.

Research output: Contribution to journal › Article › Research › peer-review

A Production Method for Standardized Continuous Fiber Reinforced FFF Filament

Aburaia, M., Bucher, C., Lackner, M., Gonzalez-Gutierrez, J., Zhang, H. & Lammer, H., 20 May 2020, In: Biomaterials and Medical Applications. 4.2020, 1, 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Epoxy-anhydride vitrimers from aminoglycidyl resins with high glass transition temperature and efficient stress relaxation

Giebler, M., Sperling, C., Kaiser, S., Duretek, I. & Schlögl, S., 17 May 2020, In: Polymers. 12, 5, p. 1 14 p.

Research output: Contribution to journal › Article › Research › peer-review

Mechanical properties of polymeric implant materials produced by extrusion-based additive manufacturing

Petersmann, S., Spörk, M., Van De Steene, W., Üçal, M., Wiener, J., Pinter, G. G. & Arbeiter, F., 1 Apr 2020, In: Journal of the Mechanical Behavior of Biomedical Materials. 104.2020, April, 13 p., 103611.

Research output: Contribution to journal › Article › Research › peer-review

Modeling and Estimation of the Pressure and Temperature dependent Bulk Density of Polymers

Kneidinger, C., Längauer, M., Zitzenbacher, G., Schuschnigg, S. & Miethlinger, J., 24 Feb 2020, In: International polymer processing. 35.2020, 1, p. 70-82 13 p.

Research output: Contribution to journal › Article › Research › peer-review

Modification of Interfacial Interactions in Ceramic-Polymer Nanocomposites by Grafting: Morphology and Properties for Powder Injection Molding and Additive Manufacturing

Cano Cano, S., Gooneie, A., Kukla, C., Rieß, G., Holzer, C. & Gonzalez-Gutierrez, J., 21 Feb 2020, In: Applied Sciences : open access journal. 10.2020, 4, 18 p., 1471.

Research output: Contribution to journal › Article › Research › peer-review

Polymer-bonded anisotropic SrFe12O19 filaments for fused filament fabrication

Huber, C., Cano Cano, S., Teliban, I., Schuschnigg, S., Groenefeld, M. & Suess, D., 12 Feb 2020, In: Journal of applied physics. 127.2020, 6, 8 p., 063904.

Research output: Contribution to journal › Article › Research › peer-review

Optimization of the 3D Printing Parameters for Tensile Properties of Specimens Produced by Fused Filament Fabrication of 17-4PH Stainless Steel

Godec, D., Cano Cano, S., Holzer, C. & Gonzalez-Gutierrez, J., 8 Feb 2020, In: Materials. 13.2020, 3, 23 p., 774.

Research output: Contribution to journal › Article › Research › peer-review