Chair of Physical Metallurgy (420)

Organisational unit: Chair

801 - 900 out of 2,174Page size: 100

Research output

  1. 2015
  2. Published

    High temperature laser-scanning confocal microscopy for the in-situ investigation of grain growth and phase transformations in intermetallic γ-TiAl based alloys

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 5, p. 259-269

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Honda Foundation Report Nr. 155: The role of materials in progress and limit of technological evolution

    Clemens, H., 2015

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  4. Published

    Impact of Al on structure and mechanical properties of TaN and NbN: An experimental and Ab initio study

    Mayrhofer, P., Marihart, H., Koller, C. & Holec, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  5. Published

    Influence of discontinuous precipitation on the creep behavior of a ß-solidified γ-TiAl based alloy

    Kastenhuber, M., Lehner, A., Hawranek, G., Krajnc, B., Clemens, H. & Mayer, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 5, p. 249-258

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Influence of pulsed bias duty cycle variations on structural and mechanical properties of arc evaporated (Al,Cr)2O3 coatings

    Pohler, M., Franz, R., Ramm, J., Polcik, P. & Mitterer, C., 2015, In: Surface & coatings technology. 282, p. 43-51

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Influence of the sample preparation technique on the μ phase fraction analysis in a Fe-25Co-15Mo alloy by means of XRD

    Turk, C., Clemens, H., Primig, S., Kellezi, G. & Leitner, H., 2015, In: Practical metallography = Praktische Metallographie. 52, 6, p. 323-333

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    In-situ Charakterisierungsmethoden: Ein wichtiges Werkzeug bei der Entwicklung von intermetallischen Titanaluminiden

    Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  9. Published

    In-situ high-energy X-ray diffraction on an intermetallic ß-stabilised γ-TiAl based alloy

    Erdely, P., Stark, A., Clemens, H. & Mayer, S., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 5, p. 221-225

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    In-situ study of the time-temperature-transformation behaviour of a multi-phase intermetallic beta-stabilised TiAl alloy

    Erdely, P., Werner, R., Schwaighofer, E., Clemens, H. & Mayer, S., 2015, In: Intermetallics. 57, p. 17-24

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    In-situ study of the time-temperature-transformation behaviour of an intermetallic γ-TiAl based alloy

    Erdely, P., Werner, R., Schwaighofer, E., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  12. Published

    Interface induced electronic structure toughening of nitride bilayers and superlattices: An ab initio study

    Rehák, P. & Holec, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  13. Published

    Intermetallische Titanaluminide als innovative Hochtemperaturleichtbau- werkstoffe – wie materialographische Methoden zu ihrer Entwicklung beigetragen haben

    Clemens, H. & Mayer, S., 2015, p. 19-28.

    Research output: Contribution to conference › Presentation › Research › peer-review

  14. Published

    Intermetallische Titanaluminide als innovative Hochtemperaturleichtbauwerkstoffe – wie materialographische Methoden zu ihrer Entwicklung beigetragen haben

    Clemens, H. & Mayer, S., 2015, Praktische Metallographie. Vol. Sonderband 47 . p. 19-28

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Intermetallische Titanaluminide als innovative Hochtemperaturleichtbauwerkstoffe – wie materialographische Methoden zu ihrer Entwicklung beigetragen haben

    Clemens, H. & Mayer, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 12, p. 691-720

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Investigation of residual stress gradients in alpha-Al2O3 coatings introduced by post-deposition blasting treatments using synchrotron X-ray nanodiffraction

    Tkadletz, M., Keckes, J., Schalk, N., Krajinovic, I., Czettl, C. & Mitterer, C., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  17. Published

    Investigation of the self tempering effect of martensite by means of atom probe tomography

    Sackl, S. C., Clemens, H. & Primig, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 7, p. 374-383

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Kleine Ursache, große Wirkung - Versagen von Bergankern-

    Freitag, C. & Panzenböck, M., 2015, p. 285.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation

    Schuh, B., Mendez Martin, F., Völker, B., George, E. P., Clemens, H., Pippan, R. & Hohenwarter, A., 2015, In: Acta materialia. 96, p. 258-268

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Metallography - A Powerful Instrument for Material Characterisation, Material Development and Failure Analysis

    Panzenböck, M., Hawranek, G., Mendez Martin, F., Mayer, S., Pölzl, S., Schütz, P., Primig, S., Rashkova, B. & Clemens, H., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  21. Published

    Methodenentwicklung zur Präparation von segregierten und oxidierten Korngrenzen in warmgewalzten Stahlbändern mittels Atomsonde

    Ebenberger, P., 2015

    Research output: Thesis › Diploma Thesis

  22. Published

    Microstructural characterization of intermetallic Mo-containing TiAl-Si alloys after high temperature deformation

    Godor, F., Werner, R., Lindemann, J., Mayer, S. & Clemens, H., 2015.

    Research output: Contribution to conference › Presentation › Research

  23. Published

    Microstructural evolution and grain refinement in an intermetallic titanium aluminide alloy with molybdenum content

    Rashkova, B., Spiradek-Hahn, K., Brabetz, M., Zhang, Z., Schöberl, T., Clemens, H. & Mayer, S., 2015, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 106, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Microstructure characterization of intermetallic γ-TiAl based alloys after high-temperature deformation

    Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 5, p. 239-248

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Microstructure, mechanical and optical properties of TiAlON coatings sputter deposited with varying oxygen partial pressures

    Schalk, N., Simonet Fotso, J., Holec, D., Fian, A., Jakopic, G., Terziyska, V., Daniel, R. & Mitterer, C., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  26. Published

    Microstructure, mechanical and optical properties of TiAlON coatings sputter-deposited with varying oxygen partial pressures

    Schalk, N., Simonet Fotso, J. F. T., Holec, D., Fian, A., Jakopic, G., Terziyska, V. L., Daniel, R. & Mitterer, C., 2015, In: Journal of physics / D, Applied physics.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Mikrostruktur-Eigenschaftsbeziehungen von Warmarbeitsstahldruckgussformen nach dem Einsatz

    Hartwig, A., 2015

    Research output: Thesis › Diploma Thesis

  28. Published

    Mikrostruktureller Aufbau eines Karbid aushärtbaren Stahls im bainitischen Zustand

    Reisinger, S., 2015

    Research output: Thesis › Diploma Thesis

  29. Published

    Mikrostrukturelle und mechanische Charakterisierung von TiAl Rennsportventilen

    Burtscher, M., 2015

    Research output: Thesis › Diploma Thesis

  30. Published

    Mikrostrukturentwicklung während des Herstellprozesses von hoch stickstofflegierten austenitischen Cr-Mn-Stählen

    Ledermüller, C., 2015

    Research output: Thesis › Diploma Thesis

  31. Published

    Nitrogen atom shift and the structural change in chromium nitride

    Wan, P., Zhang, Z., Holec, D., Daniel, R., Mitterer, C. & Duan, H., 2015, In: Acta materialia. 98, p. 119-127

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    On the chemistry of the carbides in a molybdenum base Mo-Hf-C alloy produced by powder metallurgy

    Lang, D., Pöhl, C., Holec, D., Schatte, J., Povoden-Karadeniz, E., Knabl, W., Primig, S. & Clemens, H., 2015.

    Research output: Contribution to conference › Poster › Research

  33. Published

    Optimierung eines Glühprozesses zur Perlitisierung von Stahlstäben aus dem Einsatzstahl 18CrNiMo7-6 in großen Dimensionen

    Brandl, D. C., 2015

    Research output: Thesis › Diploma Thesis

  34. Published

    Order Transition and its impact on mechanical properties of a Fe - 25 at% Co-9 at% Mo alloy

    Turk, C., Kellezi, G., Harald, L., Clemens, H. & Primig, S., 2015, p. 307.

    Research output: Contribution to conference › Poster › Research › peer-review

  35. Published

    Ordnungsphasenbildung im System FeCoMo

    Aumayr, C., 2015

    Research output: Thesis › Diploma Thesis

  36. Published

    Orientation dependent recovery and recrystallization behavior of hot-rolled molybdenum

    Primig, S., Clemens, H., Knabl, W., Lorich, A. & Stickler, R., 2015, In: International journal of refractory metals & hard materials. 48, p. 179-186

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Oxidation protection of multiphase Mo-containing γ-TiAl-based alloys under cyclic test conditions

    Donchev, A., Pflumm, R., Galetz, M., Mayer, S., Clemens, H. & Schütze, M., 2015, Materials Research Society Symposium Proceedings Vol. 1760.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  38. Published

    Phase changes observed on AlCr composite cathodes after exposure to cathodic arc plasmas in N2 and O2 atmospheres

    Franz, R., Mendez Martin, F., Hawranek, G. & Polcik, P., 2015.

    Research output: Contribution to conference › Presentation › Research

  39. Published

    Phase decomposition of a nanocrystalline CoCrFeMnNi high-entropy alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Clemens, H., Völker, B., Pippan, R. & George, E. P., 2015.

    Research output: Contribution to conference › Poster › Research

  40. Published

    Phase decomposition of a nanocrystalline CoCrFeMnNi high-entropy alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Clemens, H., George, E. P., Völker, B. & Pippan, R., 2015.

    Research output: Contribution to conference › Presentation › Research

  41. Published

    Planar faults in γ-TiAl: An atomistic study

    Dumitraschkewitz, P., 2015

    Research output: Thesis › Master's Thesis

  42. Published

    Präparationsmethoden und Untersuchung der Phasenchemie einer β-erstarrenden TiAl Legierung mittels Atomsondentomographie

    Schachermayer, M., 2015

    Research output: Thesis › Diploma Thesis

  43. Published

    Preparation of carbide-free bainitic steels for EBSD investigations

    Hofer, C., Clemens, H. & Primig, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 7, p. 384-395

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Probing thermally activated properties on a local scale

    Kiener, D., Leitner, A. & Maier-Kiener, V., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  45. Published

    Pulvermetallurgie von intermetallischen Titanaluminiden

    Mayer, S. & Clemens, H., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, p. 513 - 516 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Reconstruction of grain boundaries by crystallographic features: A method applicable for reflectron data?

    Babinsky, K., Gault, B., Clemens, H. & Primig, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  47. Published

    Residual stress gradients in alpha-Al2O3 hard coatings determined by pencil-beam X-ray nanodiffraction: The influence of blasting media

    Tkadletz, M., Keckes, J., Schalk, N., Krajinovic, I., Burghammer, M., Czettl, C. & Mitterer, C., 2015, In: Surface & coatings technology. 262, p. 134-140 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Schadensanalytik- Vorgangsweise, Fraktographie und Beispiele

    Schütz, P., 2015

    Research output: Thesis › Diploma Thesis

  49. Published

    Schädigungssequenzen an Litzenanker

    Freitag, C. & Panzenböck, M., 2015, Sonderbände der praktischen Metallographie 47. p. 209-214

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Schädigungssequenzen von Litzenankern - Einfache Bestimmungsmethoden zur Ermittlung von Schädigungssequenzen

    Freitag, C. & Panzenböck, M., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  51. Published

    Segregation of C and si in lamellar microstructures of β-solidifying γ-TiAl-based alloys

    Klein, T., Rashkova, B., Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  52. Published

    Stacking fault energies and the generalized stacking fault energy of γ-TiAl (ongoing Masterthesis)

    Dumitraschkewitz, P., Clemens, H., Mayer, S. & Holec, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  53. Published

    Structural and mechanical properties of nitrogen-deficient cubic Cr-Mo-N and Cr-W-N systems

    Zhou, L., Klimashin, F., Holec, D. & Mayrhofer, P., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  54. Published

    Structural characterization of "carbide-free" bainite in a Fe-0.2C-1.5Si-2.5Mn steel

    Hofer, C., Harald, L., Winkelhofer, F., Clemens, H. & Primig, S., 2015, In: Materials characterization. 102, p. 85-91

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Supersaturated intermetallic phases within the ternary Mo-Cr-N system

    Klimashin, F., Euchner, H., Holec, D. & Mayrhofer, P., 2015.

    Research output: Contribution to conference › Presentation › Research

  56. Published

    Synergy of atom-probe structural data and quantum-mechanical calculations in a theory-guided design of extreme-stiffness superlattices containing metastable phases

    Friak, M., Tytko, D., Holec, D., Choi, P. P., Eisenlohr, P., Raabe, D. & Neugebauer, J., 2015, In: New journal of physics. 17, p. 093004-1-093004-8

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Temperature-dependent deformation of ufg materials and composites

    Maier-Kiener, V., Leitner, A., Kreuzeder, M., Primorac, M.-M., Hosemann, P. & Kiener, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  58. Published

    Texture evolution during deformation of a Mo-Hf-C alloy studied with electron backscatter diffraction

    Lang, D., Schatte, J., Knabl, W., Clemens, H. & Primig, S., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 5, p. 226-230

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Theory-guided design of high-performance superlatticescontaining metastable phases exemplified by nano-scale CrN/AlN

    Friak, M., Tytko, D., Holec, D., Choi, P. P., Eisenlohr, P., Raabe, D. & Neugebauer, J., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  60. Published

    Theory-guided design of high-strength superlattices containing metastable phases: example of nano-scale CrN/AlN

    Friak, M., Tytko, D., Holec, D., Choi, P. P., Eisenlohr, P., Raabe, D. & Neugebauer, J., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  61. Published

    Theory-guided materials design of high-performance superlattices containing metastable phases: example of nano-scale CrN/AlN

    Friák, M., Tytko, D., Holec, D., Choi, P. P., Eisenlohr, P., Raabe, D. & Neugebauer, J., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  62. Published

    Thermal expansion of rock-salt cubic AlN

    Bartosik, M., Todt, M., Holec, D., Todt, J., Zhou, L., Riedl, H., Böhm, H. J., Rammerstorfer, F. G. & Mayerhofer, P. H., 2015, In: Applied physics letters. 107, p. 071602-1 - 071602-5

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Thermo-mechanical properties of fine grained materials: Porous vs. crystalline vs. Composite

    Kiener, D., Kreuzeder, M., Primorac, M.-M., Leitner, A., Abad, M. D., Hosemann, P. & Maier-Kiener, V., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  64. Published

    Thermo-mechanical properties of ultra-fine grained fcc-bcc composites

    Maier-Kiener, V., Primorac, M.-M., Leitner, A., Kreuzeder, M. & Kiener, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  65. Published

    The role of metallography in the development and characterization of high-performance materials

    Mayer, S., Hawranek, G., Mendez Martin, F., Panzenböck, M., Pölzl, S., Primig, S., Rashkova, B. & Clemens, H., 2015, In: Practical metallography = Praktische Metallographie. 52.2015, 2, p. 59-74 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    The use of atom probe tomography for the characterization and development of intermetallic γ-TiAl based alloys

    Klein, T., Schachermayer, M., Mendez Martin, F., Holec, D., Rashkova, B., Schöberl, T., Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  67. Published

    Verformungsinduzierte Ausscheidungsbildung von Hafniumkarbiden in der Molybdänbasislegierung MHC (Mo-Hf-C)

    Dallinger, R., 2015

    Research output: Thesis › Diploma Thesis

  68. Published

    Versagen von feuerverzinkten Stahlbauteilen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P. & Kaiser, R., 2015, Sonderbänder der praktischen Metallographie 47. p. 203-208

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Versagen von feuerverzinkten Stahlbauteilen - Gefüge und Versagen von Werkstoffen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P., Kaiser, R., Spiradek-Hahn, K. & Brabetz, M., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  70. Published

    Verzug von diamantbeschichtetem Hartmetallwerkzeug

    Reinhart, R., 2015

    Research output: Thesis › Diploma Thesis

  71. Published

    Vorzeitiges Versagen von profilierten Stahlrohren

    Schütz, P. & Panzenböck, M., 2015, p. 265.

    Research output: Contribution to conference › Poster › Research › peer-review

  72. 2014
  73. E-pub ahead of print

    Complementary ab initio and X-ray nanodiffraction studies of Ta2 O5

    Hollerweger, R., Holec, D., Paulitsch, J., Bartosik, M., Daniel, R., Rachbauer, R., Polcik, P., Keckes, J., Krywka, C., Euchner, H. & Mayerhofer, P. H., 30 Oct 2014, (E-pub ahead of print) In: Acta materialia. 83.2015, 15 January, p. 276-284 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Komplementäre Werkstoffcharakterisierung am Department Metallkunde und Werkstoffprüfung

    Mayer, S., Panzenböck, M. & Clemens, H., 6 Aug 2014, In: Dialog : Materialwissenschaft und Werkstofftechnik . p. 56-57

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Yield strength prediction in Ni-base alloy 718Plus based on thermo-kinetic precipitation simulation

    Ahmadi, M. R., Povoden-Karadeniz, E., Whitmore, L., Stockinger, M., Falahati, A. & Kozeschnik, E., 1 Jul 2014, In: Materials Science and Engineering A. 608, p. 114-122 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Mono-textured nanocrystalline thin films with pronounced stress-gradients: On the role of grain boundaries in the stress evolution

    Daniel, R., Jäger, E., Todt, J., Sartory, B., Mitterer, C. & Keckes, J., 28 May 2014, In: Journal of applied physics. 115, 20, 203507.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    On the slowdown of the crack propagation rate of austenitic stainless steels in corrosive environment

    Kapp, M., Fluch, R., Martinez, C., Pippan, R., Mori, G., Vichytil, C., Sonnleitner, R. & Panzenböck, M., 1 Jan 2014, International Corrosion Conference series / National Association of Corrosion Engineers. (NACE - International Corrosion Conference Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    60. Metallkunde Jubiläumskolloquium - Abstractband

    Mitterer, C. (Editor) & Clemens, H. (Editor), 2014, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  79. Published

    Ab initio evaluation of the potential use of Sc-based III-nitrides in optoelectronics

    Holec, D., Zhang, S., Fu, W. Y., Humphreys, C. J., Mayrhofer, P. H. & Moram, M. A., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  80. Published

    Ab initio study of point defects in NiTi-based alloys

    Holec, D., Friák, M., Dlouhý, A. & Neugebauer, J., 2014, In: Physical review : B, Condensed matter and materials physics. 89, p. 0141101-0141106

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    A combinatorial X-ray sub-micron diffraction study of microstructure, residual stress and phase stability in TiAlN coatings

    Riedl, A., Daniel, R., Todt, J., Steffenelli, M., Holec, D., Sartory, B., Krywka, C., Müller, M., Mitterer, C. & Keckes, J., 2014, In: Surface & coatings technology. 257, p. 108-113

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Advanced intermetallic γ-TiAl based alloys with improved microstructural stability during creep

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  83. Published

    Advanced intermetallic γ-TiAl based alloys with improved microstructural stability during creep

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2014, Materials Research Society Symposium Proceedings Vol. 1760 Materials Research Society.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Advanced Steels

    Clemens, H., Primig, S., Mendez Martin, F., Babinsky, K., Hofer, C., Lang, D., Sackl, S. C., Turk, C. & Weißensteiner, I., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  85. Published

    Alloying element distribution within the constituent phases of a C-containing γ-TiAl based alloy studied by atom probe tomography

    Klein, T., Mendez Martin, F., Schachermayer, M., Schöberl, T., Rashkova, B., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  86. Published

    A novel approach for site-specific atom probe specimen preparation by FIB and transmission-EBSD

    Babinsky, K., De Kloe, R., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  87. Published

    A novel approach for site-specific atom probe specimen preparation by focused ion beam and transmission electron backscatter diffraction

    Babinsky, K., De Kloe, R., Clemens, H. & Primig, S., 2014, In: Ultramicroscopy. 144, p. 9-18

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    APT/FIM and neutron diffraction study of the ordering mechanism in a Fe-Co-Mo-alloy

    Turk, C., Primig, S., Clemens, H., Leitner, H. & Kellezi, G., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  89. Published

    Atomic relaxation processes in an intermetallic Ti-43Al-4Nb-1Mo-0.1B alloy studied by mechanical spectroscopy

    Juan, J. S., Simas, P., Schmölzer, T., Clemens, H., Mayer, S. & No, M. L., 2014, In: Acta materialia. 65, p. 338-350

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Atom probe investigations in low carbon steel on Arvedi endless strip production line

    Mendez Martin, F. & Bragin, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  91. Published

    Atom probe study of boron segregation in a martensitic steel prepared according to a novel FIB/t-EBSD preparation technique

    Turk, C., Babinsky, K., Haslberger, P., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  92. Published

    Atom probe study of grain boundaries in technically pure molybdenum

    Babinsky, K., Knabl, W., Lorich, A., De Kloe, R., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  93. Published

    Atom probe study of grain boundary segregation on technically pure molybdenum

    Babinsky, K., Weidow, J., Knabl, W., Lorich, A., Leitner, H. & Primig, S., 2014, In: Materials characterization. 87, p. 95-103

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Atom probe tomography of carbides occuring in "carbide-free" bainitic steels

    Hofer, C., Winkelhofer, F., Krammerbauer, J., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  95. Published

    B2 order transformation in a Fe - 25 at% Co - 9 at% Mo alloy

    Turk, C., Kellezi, G., Leitner, H., Gan, W., Staron, P., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  96. Published

    Bruchmechanisches Verhalten von hochfesten Baustählen und deren Schweißverbindungen

    Horn, A., 2014

    Research output: Thesis › Doctoral Thesis

  97. Published

    Buckling of ZnS-filled single-walled carbon nanotubes - The influence of aspect ratio

    Monteiro, A. O., Costa, P. M. F. J., Cachim, P. B. & Holec, D., 2014, In: Carbon. 79, p. 529-537

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Characterization of a TNM alloy for high performance automotive applications

    Weißensteiner, I., 2014

    Research output: Thesis › Diploma Thesis

  99. Published

    Characterization of the crack initiation and crack propagation behavior of welded steels by means of the replica technique

    Panzenböck, M., Horn, A., Posch, G. & Clemens, H., 2014, In: Practical metallography = Praktische Metallographie. 51, p. 557-567

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Charakterisierung des Warmumformverhaltens zweier Legierungen im System TiAl-Mo

    Godor, F. R., 2014

    Research output: Thesis › Diploma Thesis

  101. Published

    Combining Fib, t-EBSD and atom probe tomography for full chemical and crystallographic materials characterization

    Babinsky, K., De Kloe, R., Haslberger, P., Hofer, C., Lang, D., Turk, C., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  102. Published

    Compositional induced changes in optical response of Si-doped titanium dioxide

    Ondracka, P., Holec, D., Franta, D., Kedronova, E., Elisabeth, S., Goullet, A. & Zajickkova, L., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1...5 6 7 8 9 10 11 12 ...22 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben