Chair of Physical Metallurgy (420)

Organisational unit: Chair

1051 - 1100 out of 2,179Page size: 50

Research output

  1. 2013
  2. Published

    On the precipitation of Hf-rich carbides in the molybdenum base alloy MHC

    Lang, D., Pöhl, C., Schatte, J. & Leitner, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  3. Published

    Optimized Hot-forming of an Intermetallic Multi-phase gamma-TiAl based alloy

    Gaitzenauer, A., Müller, M., Clemens, H., Voigt, P., Hempel, R. & Mayer, S., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 29-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Phase characterization of multi-phase advanced high strength steels

    Hofer, C., Primig, S., Pichler, A., Krammerbauer, J. & Leitner, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  5. Published

    Phase stability, mechanical properties and thermal stability of Y alloyed Ti-Al-N coatings

    Riedl, H., Holec, D., Rachbauer, R., Polcik, P., Hollerweger, R., Paulitsch, J. & Mayrhofer, P. H., 2013, In: Surface & coatings technology. 235, p. 174-180

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Phase stability, mechanical properties and thermal stability of Y alloyed Ti-Al-N thin films

    Riedl, H., Hollerweger, R., Holec, D., Rachbauer, R., Polcik, P. H., Paulitsch, J. & Mayrhofer, P. H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    Phase transformations and grain growth in TNM based alloys

    Klein, T., 2013

    Research output: Thesis › Diploma Thesis

  8. Published

    Precipitation behavior of different micro-alloyed 0.2 wt% C steels

    Nöhrer, M., 2013, 113 p.

    Research output: Thesis › Doctoral Thesis

  9. Published

    Relaxation processes at high temperatures in an TiAl-Nb-Mo intermetallics

    Simas, P., Schmölzer, T., Mayer, S., No, M. L., Clemens, H. & Juan, J. S., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 41-46

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Schwingfestigkeitsverhalten von Edelstählen in Wasser

    Borchert, M., 2013, 76 p.

    Research output: Thesis › Diploma Thesis

  11. Published

    Solid solution hardening of molybdenum-hafnium alloys: Experiments and Modeling

    Pöhl, C., Schatte, J. & Leitner, H., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 559, p. 643-650

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Solid solution softening of polycrystalline molybdenum-hafnium alloys

    Pöhl, C., Schatte, J. & Leitner, H., 2013, In: Journal of alloys and compounds. 576, p. 250-256

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Stabilization criteria for cubic AlN in TiN/AlN and CrN/AlN bi-layer systems

    Chawla, V., Holec, D. & Mayrhofer, P. H., 2013, In: Journal of physics / D, Applied physics. 46, p. 045305-1-045305-8

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Strain induced decomposition and precipitation of carbides in a molybdenum-hafnium-carbon alloy

    Pöhl, C., Lang, D., Schatte, J. & Leitner, H., 2013, In: Journal of alloys and compounds. 579, p. 422-431

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    The Effect of Cooling Rate on the Microstructure and its Influence on Toughness of two Types of Tool Steels Studied by High Resolution Techniques

    Lerchbacher, C., 2013

    Research output: Thesis › Doctoral Thesis

  16. Published

    The evolution of Y distribution during the processing route of mechnically alloyed iron studied by means of atom probe tomography

    Ressel, G., Primig, S. & Leitner, H., 2013, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 104, p. 1088-1095

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Thermodynamic calculations of phase equilibria and phase fractions of a beta-solidifying TiAl alloy using the CHALPAD approach

    Werner, R., Schloffer, M., Schwaighofer, E., Clemens, H. & Mayer, S., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 59-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Tunable optoelectronic and ferroelectric properties in Sc-based III-nitrides

    Zhang, S., Holec, D., Fu, W. Y., Humphreys, C. J. & Moram, M. A., 2013, In: Journal of applied physics. 114, p. 133510-1-133510-11

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Untersuchung des Umwandlungsverhaltens von Advanced High Strength Steels beim Galvannealing

    Suppan, C., 2013, 65 p.

    Research output: Thesis › Diploma Thesis

  20. Published

    Verbesserung der Zähigkeit von Werkzeugstählen durch Ausnutzen gezielter Festphasenumwandlungen

    Keplinger, A., 2013

    Research output: Thesis › Diploma Thesis

  21. 2012
  22. Published

    Modelling the micromorphology of heat treated Ti6Al4V forgings by means of spatial tessellations feasible for FEM analyses of microscale residual stresses

    Regener, B., Krempaszky, C., Werner, E. & Stockinger, M., Feb 2012, In: Computational materials science. 52, 1, p. 77-81 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    58. Metallkunde-Kolloquium - Abstractband

    Mitterer, C. (Editor), Clemens, H. (Editor) & Kneißl, A. (Editor), 2012, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  24. Published

    Abnormal grain growth in high-speed steels

    Schemmel, I., Martinschitz, C., Leitner, H. & Kellezi, G., 2012, Proceedings of the 9th International Tooling Conference. p. 81-87

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    A finite element model for carburisation of surface densified PM components

    Eck, S., Ishmurzin, A., Wlanis, T., Ebner, R., Hatzenbichler, T. & Planitzer, F., 2012, In: International journal of computational materials science and surface engineering. 5, 1, p. 16-30

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Atom probe study of the carbon distribution in a hardened martensitic hot-work tool steel X38CrMoV5-1

    Lerchbacher, C., Zinner, S. & Leitner, H., 2012, In: Micron. 43, p. 818-826

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Ausscheidungsverhalten der Ni-Basis-Superlegierung 718

    Turk, C., 2012

    Research output: Thesis › Diploma Thesis

  28. Published

    Basischarakterisierung der β-erstarrenden TNM™-Legierung für die Anwendung als Turbinenrad im Turbolader

    Müller, M., 2012

    Research output: Thesis › Diploma Thesis

  29. Published

    Carbon distribution and its influence on toughness in a hot-work tool steel X38CrMoV5-1

    Lerchbacher, C., Zinner, S. & Leitner, H., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Carbon Distribution and the influence on the tempering behaviour in a hot work tool steel aisi H11

    Lerchbacher, C., Zinner, S. & Leitner, H., 2012, Advanced Materials Research Vol. 409 / THERMEC 2011 Supplement. p. 702-706

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Characterization of the precipitation mechanism in the molybdenum based alloy MHC

    Lang, D., 2012, 105 p.

    Research output: Thesis › Diploma Thesis › peer-review

  32. Published

    Charakterisierung einer β-erstarrenden γ-Titanaluminid Basislegierung für Strahltriebwerksanwendungen

    Wallgram, W., 2012

    Research output: Thesis › Diploma Thesis

  33. Published

    Computer-aided modelling ranging from quantum, via atomistic to continuum level is used to support and interpret experimental observations, as well as to explore new basic-research areas

    Holec, D., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  34. Published

    Determination of the mechanism of restoration in subtransus hot deformation of Ti-6Al-4V

    Warchomicka, F., Poletti, C., Stockinger, M. & Degischer, H. P., 2012, THERMEC 2011. Trans Tech Publications, p. 252-257 6 p. (Materials Science Forum; vol. 706-709).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Dynamic phase evolution in titanium alloy Ti-6A1-4V

    Homporová, P., Poletti, C., Stockinger, M. & Warchomicka, F., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 737-740 4 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Effect of Hf on structure and age hardening of Ti-Al-N thin films

    Rachbauer, R., Blutmager, A., Holec, D. & Mayrhofer, P. H., 2012, In: Surface & coatings technology. 206, p. 2667-2672

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Eigenschaftsoptimiertes Warmumformen einer intermetallischen Titanaluminid-Legierung

    Gaitzenauer, A., Müller, M., Clemens, H., Voigt, P., Hempel, R. & Mayer, S., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 319-322

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Einfluss der Mikrolegierungselemente Niob und Vanadium auf den Vergütungsstahl 42CrMo4

    Moisi, D., 2012

    Research output: Thesis › Diploma Thesis

  39. Published

    Einfluss von Aluminium auf das Nitrieren von Schnellarbeitsstählen

    Sackl, S. C., 2012

    Research output: Thesis › Diploma Thesis

  40. Published

    Evolution of beta grain size during beta phase processing of Ti-6A1-4V

    Krumphals, A., Stockinger, M., Warchomicka, F. & Sommitsch, C., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 493-496 4 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    FEM-optimized thermomechanical processing of titanium alloy blades for steam turbines

    Stockinger, M., Zechner, W., Krenn, G. & Weber, G., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 298-301 4 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    FE2 scheme for simulation of thermo-mechanically induced phase transformations and residual stresses in Ti6A14V components

    Regener, B., Krempaszky, C., Werner, E. & Stockinger, M., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 632-636 5 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    First-principles study of the thermodynamic and elastic properties of eutectic Fe-Ti alloys

    Zhu, L.-F., Friák, M., Dick, A., Grabowski, B., Hickel, T., Liot, F., Holec, D., Schlieter, A., Kühn, U., Eckert, J., Ebrahimi, Z., Emmerich, H. & Neugebauer, J., 2012, In: Acta materialia. 60, p. 1594-1602

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Herstellung und Eigenschaften von hochfesten, vergüteten Grobblechen

    Egger, R., Grill, R. & Clemens, H., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 332-339

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Herstellung von hochfesten Grobblechen – Einfluss von Legierungselementen und Prozessbedingungen auf das Eigenschaftsprofil

    Egger, R., 2012, 163 p.

    Research output: Thesis › Doctoral Thesis

  46. Published

    Hochverformung von intermetallischen γ-Titanaluminiden

    Eidenberger, E., 2012

    Research output: Thesis › Diploma Thesis

  47. Published

    Hot Deformation of Cast and Extruded TiAl: An In-situ Diffraction Study

    Schmölzer, T., Liss, K.-D., Mayer, S., Yan, K., Reid, M., Dippenaar, R., Peel, M. & Clemens, H., 2012,

    Proceedings of International Conference of Processing & Manufacturing of Advanced Materials

    .     p. 1725-1730

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Increased thermal stability of Ti-Al-N thin films by Ta alloying

    Rachbauer, R., Holec, D. & Mayrhofer, P. H., 2012, In: Surface & coatings technology. 211, p. 98-103

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Influence of heat treatments on the microstructure of a multi-phase titanium aluminide alloy

    Schwaighofer, E., Schloffer, M., Schmölzer, T., Mayer, S., Lindemann, J., Guether, V., Klose, J. & Clemens, H., 2012, In: Practical metallography = Praktische Metallographie. 49, p. 124-137

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Influence of proton irradiation on the precipitation kinetics and mechanical properties of intermetallic precipitation-hardened steel

    Hofer, C., 2012, 62 p.

    Research output: Thesis › Diploma Thesis › peer-review

  51. Published

    Influence of temperature and strain rate on dynamic softening processes in Allvac® 718Plus™

    Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Poelt, P., 2012, THERMEC 2011. Trans Tech Publications, p. 2440-2445 6 p. (Materials Science Forum; vol. 706-709).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Influence of tempering temperature on the corrosion behaviour of plastic mould steels X38CrMo16

    Lerchbacher, C., Zinner, S. & Leitner, H., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 414-419

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...18 19 20 21 22 23 24 25 ...44 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben