Chair of Physical Metallurgy (420)

Organisational unit: Chair

951 - 1000 out of 2,178Page size: 50

Research output

  1. 2014
  2. Published

    Influence of microstructure on diffusion barrier properties of TiN investigated by TEM and APT

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Lu, J., Schalk, N., Lars, H. & Mitterer, C., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  3. Published

    In-situ high-energy X-ray diffraction on an intermetallic β-stabilised γ-TiAl alloy

    Erdely, P., 2014

    Research output: Thesis › Diploma Thesis

  4. Published

    In-situ small-angle X-ray scattering study of the Perovskite-type carbide precipitation behavior in a carbon-containing intermetallic TiAl alloy using synchrotron radiation: DESY Annual Report 2013

    Schwaighofer, E., Staron, P., Rashkova, B., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2014

    Research output: Non-textual form › Web publication/site › Transfer

  5. Published

    In-situ small-angle X-ray scattering study of the Perovskite-type carbide precipitation behavior in a carbon-containing intermetallic TiAl alloy using synchrotron radiation

    Schwaighofer, E., Staron, P., Rashkova, B., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2014, In: Acta materialia. 77, p. 360-369

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    In-situ time-temperature-transformation behaviour of an intermetallic beta-solidifying TiAl alloy using synchrotron radiation

    Erdely, P., Werner, R., Schwaighofer, E., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    Macroscopic elastic properties of textured ZrN-AlN polycrystalline aggregates: From ab initio calculations to grain-scale interactions

    Holec, D., Tasnádi, F., Wagner, P., Friak, M., Neugebauer, J., Mayrhofer, P. H. & Keckes, J., 2014, In: Physical review : B, Condensed matter and materials physics. 90, p. 184106-1-184106-9

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Microstructural design and mechanical properties of a cast and heat-treated intermetallic multi-phase gamma-TiAl based alloy

    Schwaighofer, E., Clemens, H., Mayer, S., Lindemann, J., Klose, J., Smarsly, W. & Guether, V., 2014, In: Intermetallics. 44, p. 128-140

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Microstructural investigation of thermally aged nickel-based superalloy 718Plus

    Whitmore, L., Ahmadi, M. R., Stockinger, M., Povoden-Karadeniz, E., Kozeschnik, E. & Leitner, H., 2014, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 594, p. 253-259

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Microstructure and texture evolution in an intermetallic β-stabilized TiAl alloy during forging and subsequent isothermal annealing

    Gaitzenauer, A., Stark, A., Gosslar, D., Clemens, H. & Mayer, S., 2014, In: Advanced engineering materials. 16, p. 445-451

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Microstructure evolution and grain refinement process in an intermetallic TiAl alloy with high Mi content

    Rashkova, B., Spiradek-Hahn, K., Brabetz, M., Zhang, Z., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  12. Published

    Microstructures and mechanical properties of a multi-phase beta-solidifying TiAl alloy densified by spark plasma sintering

    Voisin, T., Monchoux, J.-P., Hantcherli, M., Mayer, S., Clemens, H. & Couret, A., 2014, In: Acta materialia. 73, p. 107-115

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Mikrostrukturanalyse im Herstellungsprozess zur Qualitätskontrolle von Bauteilen der TNM-Legierung

    Wallis, C., 2014

    Research output: Thesis › Diploma Thesis

  14. Published

    Mikrostruktur - Eigenschaftsbeziehung einer warmumgeformten intermetallischen γ-TiAl-Legierung

    Lehner, A., Clemens, H., Voigt, P., Hempel, R. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  15. Published

    Modeling of two-phase grain structure in the titanium alloy TI-6AL-4V using cellular automata

    Krumphals, A., Poletti, C., Warchomicka, F., Stockinger, M. & Sommitsch, C., 2014, In: International journal for multiscale computational engineering. 12, 1, p. 23-31 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Modelling of the ductile damage behaviour of a beta solidifying gamma titanium aluminide alloy during hot-working

    Halici, D., Prodinger, D., Poletti, C., Huber, D., Stockinger, M. & Sommitsch, C., 2014, THERMEC 2013. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Trans Tech Publications, p. 556-561 6 p. (Materials Science Forum; vol. 783-786).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Neue Ansätze zur Zielpräparation von Atomsondenspitzen mittels Focused Ion Beam und Durchstrahlungs-EBSD

    Babinsky, K., Haslberger, P., Turk, C., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 361-366

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Neue Ansätze zur Zielpräparation von Atomsondenspitzen mittels Focused Ion Beam und Durchstrahlungs-EBSD

    Babinsky, K., Haslberger, P., Turk, C., Clemens, H. & Primig, S., 2014, p. 361-366.

    Research output: Contribution to conference › Presentation › Research › peer-review

  19. Published

    New findings on the atomistic mechanisms active during mechanical milling of a Fe-Y2O3 model alloy

    Ressel, G., Parz, P., Primig, S., Leitner, H., Clemens, H. & Puff, W., 2014, In: Journal of applied physics. 115, p. 1243131-1243137

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    New findings on the mechanisms during mechanical alloying of a Fe-Y2O3 model alloy and an oxide dispersion strengthened high-alloyed steel

    Ressel, G., 2014, 155 p.

    Research output: Thesis › Doctoral Thesis

  21. Published

    On the behavior of yttria/yttrium during mechanical alloying of a Fe-Y2O3 model alloy system

    Ressel, G., Parz, P., Fian, A., Holec, D., Primig, S., Puff, W., Leitner, H. & Clemens, H., 2014, Advanced Materials Research. p. 598-603

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    On the precipitation mechanism in the molybdenum based alloy MHC (mo-HF-C)

    Lang, D., Pöhl, C., Schatte, J., Primig, S. & Leitner, H., 2014, In: Powder metallurgy progress. 57, p. 311-313

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Optical properties of HfO2 analysed using first principles calculations

    Ondracka, P., Holec, D., Franta, D., Elias, M. & Zajickkova, L., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Origin of high temperature oxidation resistance of Ti-Al-Ta-N coatings

    Hollerweger, R., Riedl, H., Paulitsch, J., Arndt, M., Rachbauer, R., Polcik, P., Primig, S. & Mayrhofer, P. H., 2014, In: Surface & coatings technology. 257, p. 78-86

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Oxidation and wet etching behavior of sputtered ternary molybdenum films

    Jörg, T., Hofer-Roblyek, A. M., Winkler, J., Mitterer, C. & Köstenbauer, H., 2014.

    Research output: Contribution to conference › Presentation › Research

  26. Published

    Oxidation protection of multiphase Mo containing gamma-TiAl based alloys

    Donchev, A., Pflumm, R., Galetz, M., Mayer, S., Clemens, H. & Schütze, M., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    Oxygen impurity related hardening mechanisms of Ti-Al-N thin films

    Riedl, H., Koller, C., Rachbauer, R., Kolozsvari, S., Mendez Martin, F. & Mayrhofer, P. H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    Phase and interstitial element characterization via atom probe tomography in a multi-phase TiAl based alloy

    Mendez Martin, F., Klein, T., Schachermayer, M., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  29. Published

    Phasenumwandlungen und Kornwachstumsverhalten in β-stabilisierten TiAl Legierungen

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  30. Published

    Phase transformations and grain growth behaviour in beta-stabilized TiAl alloys

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    Phase transformations and grain growth in beta-stabilized TiAl alloys

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 289-290

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Präparation von karbidfreien bainitischen Stählen für EBSD-Untersuchungen

    Hofer, C., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 71-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Präparation von karbidfreien bainitischen Stählen für EBSD-Untersuchungen

    Hofer, C., Clemens, H. & Primig, S., 2014, p. 71-76.

    Research output: Contribution to conference › Presentation › Research › peer-review

  34. Published

    Precipitation behavior of strain-induced V preicipitates in ferrite at different temperatures in a 0.2wt% carbon steel

    Nöhrer, M., Mayer, W., Zamberger, S., Kozeschnik, E. & Leitner, H., 2014, In: Steel research international. 85, p. 679-688

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Simulation of yield strength in Allvacspi® 718Plus™

    Ahmadi, M. R., Whitmore, L., Povoden-Karadeniz, E., Stockinger, M., Falahati, A. & Kozeschnik, E., 2014, THERMEC 2013 Supplement. Trans Tech Publications, p. 7-12 6 p. (Advanced Materials Research; vol. 922).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Structural and mechanical evolution of reactively and non-reactively sputterd Zr-Al-N thin films during annealing

    Mayrhofer, P. H., Sonnleitner, D., Bartosik, M. & Holec, D., 2014, In: Surface & coatings technology. 244, p. 52-56

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Structural stability and thermodynamics of CrN magnetic phases from ab initio calculations and experiment

    Zhou, L., Körmann, F., Holec, D., Bartosik, M., Grabowski, B., Neugebauer, J. & Mayrhofer, P. H., 2014, In: Physical review : B, Condensed matter and materials physics. 90, p. 184102-1-184102-12

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Structural stability and thermodynamics of CrN magnetic phases from first principles

    Holec, D., Zhou, L., Bartosik, M., Körmann, F., Grabowski, B., Neugebauer, J. & Mayrhofer, P. H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  39. Published

    Structure and mechanical properties of Ta alloyed Cr-Al-N coatings

    Hollerweger, R., Zhou, L., Holec, D., Rachbauer, R., Polcik, P. & Mayrhofer, P. H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  40. Published

    Studies on ductile damage and flow instabilities during hot deformation of a multiphase ã-TiAl alloy

    Halici, D., Zamani, H. A., Prodinger, D., Poletti, C., Huber, D., Stockinger, M. & Sommitsch, C., 2014, Material Forming ESAFORM 2014. Trans Tech Publications, p. 99-105 7 p. (Key Engineering Materials; vol. 611-612).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    The effect of interlayer composition and thickness on the stabilization of cubic AlN in AlN/Ti-Al-N superlattices

    Chawla, V., Holec, D. & Mayrhofer, P., 2014, In: Thin solid films. 565, p. 94-100

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    The effect of Zr incorporation caused by ball abrasion in a milled Fe-Y2O3 model alloy

    Ressel, G., Primig, S. & Leitner, H., 2014, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45, p. 1552-1558

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    The microstructure of heat-treated nickel-based superalloy 718Plus

    Whitmore, L., Ahmadi, M. R., Guetaz, L., Leitner, H., Povoden-Karadeniz, E., Stockinger, M. & Kozeschnik, E., 2014, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 610, p. 39-45

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    The origin of carbon nanotubes G-mode upshift under pressure: out -of-plane compression effects in in-plane bond strength

    Sun, Y. W., Holec, D. & Dunstan, D. J., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    Thermal properties of Ti-Al alloys: A combined theoretical and experimental approach

    Holec, D., Schmölzer, T., Legut, D., Staron, P. & Clemens, H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  46. Published

    The use of in-situ characterization techniques for the development of intermetallic titanium aluminides

    Mayer, S., Schwaighofer, E., Schloffer, M. & Clemens, H., 2014, Materials Science Forum. p. 2097-2102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Untersuchung des Selbstanlasseffektes von Martensit mit Hilfe von Atomsondentomographie

    Sackl, S. C., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 209-214

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Verein Leobener Werkstoffwissenschafter - Rückblick und Vorschau anlässlich des 25jährigen Bestehens

    Clemens, H., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 395-396

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Widmannstätten austenite formation in a superduplex steel

    Primig, S. & Clemens, H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. 2013
  51. Published

    Corrosion fatigue properties of austenitic stainless steels with different composition and strength in chloride solutions

    Visser, A., Vichytil, C., Mori, G., Vidic, J., Pippan, R., Panzenböck, M. & Kapp, M., 1 Dec 2013, EUROCORR 2013 - European Corrosion Congress. (EUROCORR 2013 - European Corrosion Congress).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    3D Characterization of an Intermetallic beta/gamma-Titanium aluminide alloy

    Engstler, M., Mayer, S., Pauly, C., Clemens, H. & Mücklich, F., 2013, In: Advanced engineering materials. 15, p. 1125-1128

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...16 17 18 19 20 21 22 23 ...44 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben