Chair of Metal Forming (560)

Organisational unit: Chair

201 - 250 out of 731Page size: 50

Research output

  1. 2015
  2. Published

    Flowforming research at Montanuniversitaet Leoben

    Buchmayr, B. & Kuss, M., 30 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  3. Published

    Simulation based optimization of tube K-joints for tower cranes

    Stix, G. & Buchmayr, B., 5 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  4. Published

    Simulation based optimization of tube K-joints for tower cranes

    Stix, G. & Buchmayr, B., 3 Jun 2015

    Research output: Non-textual form › Digital or Visual Products › Research

  5. Published

    Detektion von Rissen und Bestimmung der Risstiefe mit induktiver Thermografie

    Oswald-Tranta, B., Schmidt, R. & Buchmayr, B., 13 May 2015, Berichtsband DACH-Jahrestagung 2015. Salzburg, Vol. 152.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    High strength forging steel by direct cooling from the forging heat

    Buchmayr, B. & Eggbauer, G., 5 May 2015.

    Research output: Contribution to conference › Presentation › Research

  7. Published

    High strength forging steel by direct cooling from the forging heat

    Buchmayr, B. & Eggbauer, G., 5 May 2015, Internationale Konferenz "Neuere Entwicklungen in der Massivumformung".

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Experimental Characterization and Modeling of Residual Stress Grandiens across Straight and Bent Seamless Steel Tubes

    Winter, G., Klarner, J., Staron, P., Buchmayr, B. & Keckes, J., 16 Apr 2015, p. 231 - 236.

    Research output: Contribution to conference › Presentation › Research

  9. Published

    Virtual process design for cold formed components

    Schratter, S., Keckes, J., Winter, G. & Buchmayr, B., 16 Apr 2015, Material Forming ESAFORM 2015. Trans Tech Publications, p. 1279 - 1284 (Key Engineering Materials ; vol. Vol 651-653).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Einfluss von Silizium auf bainitische Gefüge und deren Eigenschaften

    Weber, A. & Buchmayr, B., Apr 2015.

    Research output: Contribution to conference › Poster › Research

  11. Published

    Gefügeeigenschaften niedriglegierter Kohlenstoffstähle hinsichtlich Sauergasbeständigkeit

    Weber, A., Stix, G. & Buchmayr, B., 16 Mar 2015.

    Research output: Contribution to conference › Presentation › Research

  12. Published

    Gefügeeigenschaften niedriglegierter Kohlenstoffstähle hinsichtlich Sauergasbeständigkeit

    Weber, A., Stix, G. & Buchmayr, B., 16 Mar 2015, XXXIV. Verformungskundliches Kolloquium 2015 Tagungsband. Buchmayr, B. (ed.). Leoben: Eigenverlag, p. 181 - 192 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  13. Published

    Neue Leichtbaumöglichkeiten durch Selektives Laser Schmelzen

    Buchmayr, B. & Walzl, A., 16 Mar 2015, XXXIV. Verformungskundliches Kolloquium 2015 Tagungsband. Buchmayr, B. (ed.). Leoben: Eigenverlag, p. 13-17 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  14. Published

    Werkzeugbau mittels Selektiven Laser Schmelzen

    Panzl, G. & Buchmayr, B., 16 Mar 2015, XXXIV. Verformungskundliches Kolloquium 2015 Tagungsband. Buchmayr, B. (ed.). Leoben: Eigenverlag, p. 7-12 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  15. Published

    Nichtlinear kinematisch-isotrop kombiniertes Verfestigungsverhalten in der Simulation von Kaltmassivumformprozessen

    Schratter, S. & Buchmayr, B., 15 Mar 2015, XXXIV. Verformungskundliches Kolloquium 2015 Tagungsband. Buchmayr, B. (ed.). Leoben: Eigenverlag, p. 68 - 73 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  16. Published

    Eine SWOT-Analyse zum Einsatz der Additiven Fertigung für metallische Bauteile

    Buchmayr, B. & Panzl, G., Jan 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 1, p. 15-20 6 p.

    Research output: Contribution to journal › Article › Research

  17. Published

    Additive Manufacturing zur Herstellung von Umformwerkzeugen

    Walzl, A., 2015

    Research output: Thesis › Master's Thesis

  18. Published

    Analytical, numerical and experimental investigations of a ball spinning expansion process

    Kuss, M. & Buchmayr, B., 2015, In: Journal of materials processing technology. 224.2015, October, p. 213-221 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Charakterisierung der Oberflächengüte und Grenzabmessungen beim selektiven Laserschmelzen

    Preuler, L., 2015

    Research output: Thesis › Master's Thesis

  20. Published

    Eigenspannungsoptimiertes Schweißen von Nahtlosrohren

    Stix, G., 2015

    Research output: Thesis › Doctoral Thesis

  21. Published

    Experimental characterization and modelling of triaxial residual stresses in straightened railway rails

    Kaiser, R., Stefenelli, M., Hatzenbichler, T., Antretter, T., Hofmann, M., Keckes, J. & Buchmayr, B., 2015, In: The Journal of Strain Analysis for Engineering Design. 50, 3, p. 190-198 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    High-Strength Bainitic Steels for Forged Products

    Eggbauer, G. & Buchmayr, B., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 5, p. 209 - 213 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Influence of weld length on behavior of tubular K-joints under load

    Stix, G., Weber, A. & Buchmayr, B., 2015.

    Research output: Contribution to conference › Poster › Research

  24. Published

    Investigation of residual stresses and distortions produced in tubular K-joint

    Stix, G. & Buchmayr, B., 2015

    Research output: Non-textual form › Digital or Visual Products › Research

  25. Published

    Macro- and Microscopic Properties of Gradient Ultra High Strength Thermo-Mechanically Rolled Seamless Steel Tubes

    Winter, G., 2015

    Research output: Thesis › Doctoral Thesis

  26. Published

    MAMC 2014: Vienna's Metal AM Conference reports on progress in a rapidly changing industriy

    Buchmayr, B. & Stampfl, J., 2015, In: Metal AM. 1, 1/2015, p. 53-60 8 p.

    Research output: Contribution to journal › Article › Research

  27. Published

    Mechanical properties of low-alloy-steels with bainitic microstructures and varying carbon content

    Weber, A., Klarner, J., Vogl, T., Schöngrundner, R., Sam, G. & Buchmayr, B., 2015, Proceeding MPPE 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    New lightweight design opportunities and applications for high-strength steels using selective laser melting

    Buchmayr, B., 2015.

    Research output: Contribution to conference › Presentation › Research

  29. Published

    Simulation inkrementeller Rohraufweitung

    Kuss, M. & Buchmayr, B., 2015, 16. RoundTable Simulating Manufacturing.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Untersuchung des Einflusses von Walzparametern eines Duo Walzgerüsts auf die mechanischen Eigenschaften ausgewählter Stahlqualitäten

    Ebenbauer, S., 2015

    Research output: Thesis › Diploma Thesis

  31. 2014
  32. Published

    Yield strength prediction in Ni-base alloy 718Plus based on thermo-kinetic precipitation simulation

    Ahmadi, M. R., Povoden-Karadeniz, E., Whitmore, L., Stockinger, M., Falahati, A. & Kozeschnik, E., 1 Jul 2014, In: Materials Science and Engineering A. 608, p. 114-122 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Akademische Schweißtechnische Ausbildung in Österreich

    Enzinger, N., Schlacher, C., Buchmayr, B., Busch, R. & Heim, D., 2014, In: Schweiß- & Prüftechnik. p. 41-46

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Charakterisierung bainitischer Gefügezustände in Schmiedestählen

    Eggbauer, G., Weber, A., Lechleitner, J. & Buchmayr, B., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. 194-200

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    CHARAKTERISIERUNG BAINITISCHER GEFÜGEZUSTÄNDE IN SCHMIEDESTÄHLEN

    Eggbauer, G., Weber, A. & Buchmayr, B., 2014, Tagungsband XXXIII. Verformungskundliches Kolloquium. p. 113-117

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Charakterisierung des Beulverhaltens von Gaspipelines

    Fritz, R., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. 302-303

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Charakterisierung des Beulverhaltens von Gaspipelines

    Fritz, R. & Buchmayr, B., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Charakterisierung unterschiedlicher Schmiermittel zum Schmieden von Aluminiumlegierungen mittels Ringstauchversuch

    Milosevic, I., 2014

    Research output: Thesis › Diploma Thesis

  39. Published

    Eigenspannungsoptimiertes Richten von Eisenbahnschienen

    Kaiser, R., 2014

    Research output: Thesis › Doctoral Thesis

  40. Published

    Ermittlung der Zähigkeitsentwicklung großer Schmiedestücke während der Wärmebehandlung

    Panzl, G., 2014

    Research output: Thesis › Master's Thesis

  41. Published

    Fabrikation und Anwendung von metallischen Schichtverbundwerkstoffen

    Kasberger, R. & Buchmayr, B., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. 201-207

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    FEM- Materialmodellvalidierung mittels Eigenspannungen

    Schratter, S. & Buchmayr, B., 2014, Tagungsband XXXIII. Verformungskundliches Kolloquium 2014. p. 45-51

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Kinetics of the Austenite-to-Ferrite Phase Transformation - Simulations and Experiments

    Gamsjäger, E., Werner, R., Schiller, W. & Buchmayr, B., 2014, In: Steel research international. p. 131-142

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Maschinenbau, Werkstoffkompetenz und Werkstoffanwendung - Tribologische Aufgabenstellungen

    Grün, F., Galler, R., Prenner, M., Supancic, P., Mitterer, C., Ebner, R., Hausberger, A., Schlögl, S., Buchmayr, B., Godor, I., Leitner, M. & Krampl, H., 2014.

    Research output: Contribution to conference › Presentation › Research

  45. Published

    Modeling of two-phase grain structure in the titanium alloy TI-6AL-4V using cellular automata

    Krumphals, A., Poletti, C., Warchomicka, F., Stockinger, M. & Sommitsch, C., 2014, In: International journal for multiscale computational engineering. 12, 1, p. 23-31 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Modellierung des Kaltpilgerns – Betrachtung der Schädigungsentwicklung und ihre Beeinflussung durch die Vorformgeometrie

    Ragger, K., Kaiser, R., Paal, J., Fluch, R. & Buchmayr, B., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 214-219

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Modelling of the ductile damage behaviour of a beta solidifying gamma titanium aluminide alloy during hot-working

    Halici, D., Prodinger, D., Poletti, C., Huber, D., Stockinger, M. & Sommitsch, C., 2014, THERMEC 2013. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Trans Tech Publications, p. 556-561 6 p. (Materials Science Forum; vol. 783-786).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    New Perspectives on Heat Treatment of Large Forgings

    Taschauer, M., Panzl, G., Wieser, V., Seemann, M. & Buchmayr, B., 2014, International Forgemaster Conference 2014. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Physically based modelling of creep-fatigue in hot work tool steels

    Krumphals, F., 2014, 146 p.

    Research output: Thesis › Doctoral Thesis

  50. Published

    Production and Characterisation of Multilayer Metalic Composites

    Buchmayr, B. & Kasberger, R., 2014, Production an Processing of Clad Materials and Metal Matrix Composites. p. 108-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    PROZESSKETTENBETRACHTUNG VON KMU-GESENKSCHMIEDEBETRIEBEN

    Letschnik, A., 2014, Tagungsband XXXIII. Verformungskundliches Kolloquium. p. 31-37

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Radialschmieden versus Zylinderdrückwalzen

    Kuss, M. & Buchmayr, B., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 208-213

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...15 Next
View graph of relations

Contact information

Franz-Josef Straße 18, 8700 Leoben